Professional Documents
Culture Documents
3.9 Capacitance Question Bank
3.9 Capacitance Question Bank
3.9 Capacitance Question Bank
9 CAPACITANCE
1) 3.12X1018 electrons
2) 6.24X1018 electrons
3) 6.24X10-18 electrons
1) Same voltage
2) 50% more than the voltage applied
3) 25 % more than the voltage applied
4). If the thickness of the di electric medium increases
1) Capacitance increases
2) Capacitance decreases
3) Capacitance no change
1) CT = C1 + C2 +C3
2) 1/CT = 1/C1 +1/C2+1/C3
3) All the above
6). The standard unit of capacitive reactance XC is
1) Farad
2) Henry
3) Ohms
4) None
1. AC
2. DC
3. AC & DC
4. None
8). The polarity should be observed when connecting the following capacitor
1. Mica
2. Paper
3. Ceramic
4. Electrolytic
1. Directly proportional to the plate area and inversely proportional to square distance
2. Directly proportional to the distance between the plates and inversely proportional to
plate area
3. Directly proportional to the plate area and inversely proportional to distance between
them
4. All the above
10). If the capacitors are connected in parallel the total capacitance is:
1. Electrolytic capacitor
2. Instead of aluminum, tantalum is used
3. Larger capacity in small size and leakage current
4. All the above
12). The charge of coulomb establishes a potential difference of one volt between the
plates of the capacitances is:
1. One Farad
2. One microfarad
3. One ampere
4. One webber
13. If the area of plate in the capacitor increased then the capacitance of the
capacitor also
1. Increases
2. Decreases
3. Remains same
4. Zero
1. Mica
2. Paper
3. Ceramic
4. Electrolytic
1. coupling
2. Bypassing
3. Filtering
4. All the above
16. If the area of plate in the capacitor is decreased then the capacitance of the
capacitor also
1. Incrases
2. Decreases
3. Remains same
4. Zero
1. Voltage
2. Frequency
3. Capacitance
4. 2 and 3
1. Decrease
2. Increase
3. Remain same
4. None
19. If applied frequency is decreased in a capacitance circuit, the capacitive reactance
will
1. Decrease
2. Increase
3. Remain same
4. None
1. Mica
2. Ceramic
3. Paper
4. Electrolytic
1. AC
2. DC
3. AC & DC
4. None
1. Decrease
2. Increase
3. Remain same
4. None
1. Decrease
2. Increase
3. Remain same
4. None
24. In an AC capacitive circuit the reactance of the capacitor
1. coulomb/volt
2. volt/coulomb
3. Ohms
4. None
1. Area
2. Distance between the plate
3. Medium
4. All the above
1.100µF at 10 V
2. 10µF at 10V
3.1 µF at 10V
4. 1 farad at 10 V