Professional Documents
Culture Documents
MBS - Galaxy 7000 & LIB User Training Manual
MBS - Galaxy 7000 & LIB User Training Manual
Prepared by Sai
All content in this presentation is protected – © 2008 American Power Conversion Corporation
Agenda
• Overview UPS Schematic Mimic Diagram
• System Features
• System Components
• User Operating
• Lithium-Ion Battery Solution
• Escalation
Note: The above procedure should be carry out by trained and authorized person.
Note: The above procedure should be carry out by trained and authorized person.
Note: The above procedure should be carry out by trained and authorized person.
Note: The above procedure should be carry out by trained and authorized person.
All content in this presentation is protected – © 2008 American Power Conversion Corporation
Schneider Electric’s LIB Solution
A modular solution accomodating a wider range of needs
SMPS &
System BMS From 1-32 racks
13 or 17
depending on power
per rack and backup time
1 Gateway (System BMS)
Cell Module per system
(1U, fit in one of the LIB racks)
(8 cells)
LIB Rack
(W600xD650xH2100mm)
67Ah Cell
8S Plastic Module
+Integrated BMS
Rack Fuse
In order shutdown the Battery BMS, he 2 AC supplies shown below must be disconnected/powered off. Vice Versa, the AC supplies have to
be connected/powered on to turn on the battery BMS as well as providing the voltage needed for the undervoltage coil in the battery breaker
to operate (reset & turn on).
The battery system for a UPS is designed to be always on. The UPS and the critical load must be set up
so that the battery systems maximum allowable voltage and current are not exceeded.
Indicator LED
Four indicator LED s on the front of the Switchgear Assembly in each rack displays the status of the
battery system per string. Table 2-1 shows each LED s color and the battery status indicated.
System Reset
To reset the battery system; e.g. after a major fault or minor alarm, press the “reset button” on the front of the SMPS. This will reset all fault &
alarms on the system and return the system to normal status.
Information require
UPS Serial No: xxx
Customer Infor: xxx
Thank you.