Professional Documents
Culture Documents
Composite and Conventional Members Comparison - Thesis - Part4
Composite and Conventional Members Comparison - Thesis - Part4
Composite and Conventional Members Comparison - Thesis - Part4
Comparison”
10 0 +0.7 -0.7
= 1.12 x 0.7
= 0.784 kN/ sq m
The roof wind load will be applied in UDL format of main framing member, by
considering consecutive load area in plan.
= 1.568 KN/m
Temperature
As per climatic condition at Lonawala, we can consider maximum 200 temperature
variation, to check the effect of temperature stress on structure.
Seismic Load:
The following input is considered for generation of Earthquake Loads.
Height of Building, H = 10 m
= 0.066
Following are the results obtained from the above two approaches.
Following are the design results obtained from the above conventional type structure
approach.