Professional Documents
Culture Documents
Katalog 2019 en
Katalog 2019 en
Katalog 2019 en
Preface 3
New products 4
1
2
Dear Customer,
We are proud to present you with our 2019/20 product catalogue!
While replacing the 2017/18 version of the catalogue, we look back on two very successful years.
Success can also bring challenges. The high demand for our systems makes it necessary to produce
faster and in larger quantities. In order to successfully overcome this challenge and meet the demands
of our customers, we strive for continuous improvements in both production and in our infrastructure.
Currently, the expansion of our production facility in Holzmaden by 3.000 m² is being planned and
should be completed within the next few months.
Our company is experiencing strong growth not only internally, but also internationally. With over
40 exclusive foreign representatives and a US facility, we feel well positioned to help machining and
manufacturing companies around the world optimise their manufacturing processes with our
technologies. This high level of service and customer closeness would not be possible without the
hard and motivated work of our partners. For this we express a big thank you.
In addition to new developments in the areas of zero-point clamping and workholding, this
catalogue differs from previous ones, mainly in the style the products are presented. A great addition
is our very first app, designed to make the catalogue interactive and even more user friendly.
More information about the LANG App and how to use it can be found on page 5.
We hope that you enjoy discovering new ways to positively influence your manufacturing not only
for today, but also for the challenges of tomorrow.
3
LANG Technik new products 2019
Makro•Grip®
5-Axis-Vice - Generation 2018
Preci•Point
Collet Chuck
4
Experience Augmented Reality live:
LANG Technik has always been a technological leader in the industry. technology in a simple and understandable format (that is also excit-
For metal-cutting production LANG's innovations have always been ing and interesting).
groundbreaking and have become the industry standard (stamp- We happily introduce to you our first App. Among other
ing technology, the zero-point clamping system and the Clean•Tec things, this app makes it possible to experience the LANG catalogue
cleaning fan). in a new dimension, Augmented Reality. On selected pages, our
We try to live up to this claim in our day-to-day work and strive technologies are described more vividly and in more detail.
to keep an eye on the trends of tomorrow. This applies not only to In order for the LANG catalogue to become more interactive
our manufacturing processes, but equally to the way in which our and user friendly for you, please follow the instructions on the upper
customers are allowed to gather information and learn about new right side.
Quick•Point®
3- & 4-face Tombstone 52 / 3-face Pyramid 96
5
CONSISTENT FURTHER Clean•Tec
DEVELOPMENTS
Vario•Tec
Stamping Unit
simple — clever
innovative — pioneering
complete — flexible
medical engineering
automotive / motorsports
6
LANG Technik
CONTINUOUS
GROWTH
130 employees at
three different sites →
MADE IN
GERMANY
7
All from one source
Quick•Point®
Zero-Point Clamping System from page 10
Makro•Grip® Makro•Grip®
Stamping Technology from page 62 Raw Part Clamping / Conventional
Workholding from page 78
Makro•Grip ® stamping technology ensures wear-free
clamping of high-tensile material via our patented From raw material to finished product – A solution that fits
form-closure technology where other, conventional all of your challenging clamping tasks. Where maximum
clamping devices reach their limits. Clamping scenarios accessibility is required, the compact Makro•Grip® 5-Axis
that require high holding power, but where the poten- Vice is your choice for 5-sided machining. From shaped
tial for workpiece deformation exists, are easily and to round parts.In addition the modular clamping package
reliably mastered with pre-stamping the workpiece. is completed with multiple clamping systems for profile
The combination of pre-stamping and the Makro•Grip ®
and round parts (Avanti, Profilo, Preci•Point), along with
5-Axis Vice is the best solution for 5-sided machining the Vario•Tec Vices for the machining of the 6th side.
and has no comparable product on the market.
8
Robo•Trex Clean•Tec
Automation System Cleaning Fan from page 128
More efficiency, automatically! The innovative and Clean•Tec is the practical, time saving solution for the
patented trolley system of the Robo•Trex automation removal of chips and coolant from the machine table, fix-
creates flexibility and guarantees extended machining tures and/or workpieces before unloading. Used like any
hours and machine tool utilisation, even during other tool from the tool changer, the blades are opened
unmanned evening and weekend shifts. Thanks to the and closed with the adjustment of the spindle rotation.
offline preparation of the trolleys, the Robo•Trex is
(re-) loaded quickly and without machine tool downtime.
The trolley ensures maximum space utilisation with the
patented, angled mounting of the vices.
9
ZERO-POINT CLAMPING SYSTEM
ZERO-POINT
CLAMPING SYSTEM
60 Quick•Point ® Service
CONVENTIONAL WORKHOLDING
CLEANING FAN
ZERO-POINT CLAMPING SYSTEM
12
ZERO-POINT CLAMPING SYSTEM
Quick•Point ®
Zero-Point
CONVENTIONAL WORKHOLDING
→ Modularity
Enormous variety of combinable zero-point plates,
expandable at any time
→ Simplicity
Mechanical clamping via a tightening screw or quick release
CLEANING FAN
13
ZERO-POINT CLAMPING SYSTEM
Quick•Point® Technology
3 2
5
1
7
4
1 With only 27 mm one of the lowest zero-point systems 5 Rigid, compact base plate made of case-hardened and
on the market ground steel
2 Highly precise with < 0.005 mm repeat accuracy 6 4 × M5 threads used as positioning support for vices
(added on some plates and options on others)
3 Cover discs for mounting bores
7 Clamping edge as one of a few options to mount the
4 Robust mechanical clamping with one actuation screw plate to the machine table
or Quick-Lock fastener
8 10
8 Ø12F5 fitting for concentrical alignment, centring studs 10 20H7 keyways for axial alignment
now also available (page 57)
9 Coolant drainage
14
ZERO-POINT CLAMPING SYSTEM
Robust, wear-free mechanism
for highest longevity
CONVENTIONAL WORKHOLDING
Flexibility has no limits!
15
ZERO-POINT CLAMPING SYSTEM QUICK•POINT® SINGLE PLATES
104
12 F5
52
QU IC K • P O IN T ® 5 2 , G R I D P LAT E
104 × 10 4 × 2 7 M M , W I T H OUT M OUN T I N G B OR ES 30 Nm Ø 16 mm 77
52
12 F5
82 ±0,01
104
28 4x 12 F5
4x 17,5
QU IC K • P O IN T ® 5 2 , G R I D P LAT E
104 × 104 × 2 7 MM , W I T H M OUN T I N G B OR E S F O R QU I C K •TOW ER 30 Nm Ø 16 mm 77
16
ZERO-POINT CLAMPING SYSTEM
192
12 F5
150 0,01
12 F5
CONVENTIONAL WORKHOLDING
120 0,01
192
96
28 4x 12 F5
4x 19
17
ZERO-POINT CLAMPING SYSTEM QUICK•POINT® SINGLE PLATES
192
150 ±0,01
12 F5
63 ±0,01
35
20 H7
96
63 ±0,01
4x 12 F5
4x 19
QU IC K • P O IN T ® 96 , G R I D P LAT E
192 × 192 × 27 MM, WITH MOUNTING BORES FOR 63 MM T-SLOT DISTANCE 30 Nm Ø 20 mm 125
246
170
12 F5
20 H7
126
96
4x 12,5
4x 19
QU IC K • P O IN T ® 96 , R OUN D P LAT E
Ø 24 6 × 2 7 MM , W I T H M OUN T I N G B OR E S F OR 6 3 MM T-SLOT DI STANC E 30 Nm Ø 20 mm 125
18
ZERO-POINT CLAMPING SYSTEM
192
150 ±0,01
12 F5
200 ±0,01
96
246
20 H7
12 F5
19
192
12 F5
CONVENTIONAL WORKHOLDING
96
246
19
ZERO-POINT CLAMPING SYSTEM QUICK•POINT® SINGLE PLATES
150
100 ±0,01
12 F5
50 ±0,01
20 H7
116
28
52
34,5 12 F5
19
150
12 F5 52
116
20
ZERO-POINT CLAMPING SYSTEM
192
150 ±0,01
12 F5
28
96
156
34,5 12 F5
19
192
12 F5
CONVENTIONAL WORKHOLDING
96
156
21
ZERO-POINT CLAMPING SYSTEM QUICK•POINT® SINGLE PLATES
116
20 H7
12 F5
12 F5
52
20
96 ±0,01
QU IC K • P O IN T ® 5 2 , R OUN D P LAT E
Ø 116 × 2 7 M M 30 Nm Ø 16 mm 77
116
12 F5
52
QU IC K • P O IN T ® 5 2 , R OUN D P LAT E
Ø 116 × 2 7 M M, W I T H OUT M OUN T I N G B OR E S 30 Nm Ø 16 mm 77
22
ZERO-POINT CLAMPING SYSTEM
96 ±0,01
20 H7
12 F5
12 F5 M 4,5
1
10
52
100 ±0,01
157
157
12 F5
CONVENTIONAL WORKHOLDING
52
23
ZERO-POINT CLAMPING SYSTEM QUICK•POINT® SINGLE PLATES
12 F5
19
126 ±0,01
96
60 ±0,01
150 ±0,01
QU IC K • P O IN T ® 96 , R OUN D P LAT E
Ø 176 × 2 7 M M 30 Nm Ø 20 mm 125
176
12 F5
96
QU IC K • P O IN T ® 96 , R OUN D P LAT E
Ø 176 × 2 7 MM , WI T H OUT M OUN T I N G B OR E S 30 Nm Ø 20 mm 125
24
ZERO-POINT CLAMPING SYSTEM
196 / 246
12 F5
246
12 F5
14
H7
CONVENTIONAL WORKHOLDING
96
R110
R90
4x 12,5
2x
M
4x 19
6
18
H7
25
ZERO-POINT CLAMPING SYSTEM QUICK•POINT® SINGLE PLATES
157
52
QU IC K • P O INT ® 5 2 , R OUN D P LAT E
Ø 15 7 × 2 7 M M, FOR I N D I V I D UA L C E N T R E B OR E 30 Nm Ø 16 mm 77
→→ 1 × Centre bore Ø 38 mm
→→ 1 × Keyway 20H7
→→ 4 × Mounting bores for M8 screws, incl. step for Ø 15 mm
cover discs, for machine tables with 6 × 60° grooves
26
ZERO-POINT CLAMPING SYSTEM
A centre bore with individually selectable diameter and tolerance provides the option
for access to rotary joints.
CONVENTIONAL WORKHOLDING
→→ 1 × Centre bore Ø 80 mm
→→ 1 × 130H6 tapered fitting
→→ 4 × Mounting bores for M12 screws, incl. step for Ø 20 mm
cover discs, for machine tables with 6 × 60° grooves
CLEANING FAN
27
ZERO-POINT CLAMPING SYSTEM QUICK•POINT® MULTI PLATES
93 ±0,01
208
93 ±0,01
4x
4x
12 F5
17,5
52
104
QU IC K • P O IN T ® 5 2 , 2- F OLD G R I D P LAT E
208 × 10 4 × 2 7 M M 30 Nm Ø 16 mm 77
28
ZERO-POINT CLAMPING SYSTEM
27
96
22
25
2x
208
52 52
QU IC K • P O INT ® 5 2 , 4 - F OLD G R I D P LAT E
208 × 2 08 × 2 7 M M , W I T H OUT M OUN T I N G B OR ES 60 Nm Ø 16 mm 77
Included in delivery: 4 × Quick•Point clamping studs Ø 20 mm, for adapting the plate to the Quick•Point® 96 system
Suitable Quick-Lock: Item No. 45452 (page 54)
208
52 52 52
2x 25
63
35
CONVENTIONAL WORKHOLDING
0
20 H7
63
8,5
15
4x
4x
63
52
63
29
ZERO-POINT CLAMPING SYSTEM QUICK•POINT® MULTI PLATES
96
384
96
96
192
QU IC K • P O IN T ® 96 , 2- F OLD G R I D P LAT E
384 × 192 × 2 7 M M , W I T H OUT M OUN T I N G B OR ES 30 Nm Ø 20 mm 125
27
Suitable Quick-Lock: Item No. 45296 (page 54)
384
96 96 96
50 H7
364
30
ZERO-POINT CLAMPING SYSTEM
384
96 96 96 37
126
63
20 H7
63
126
6x 12,5
6x 19
126
25
0
25
126
QUI C K • P O IN T ® 96, 2- F OLD G R I D P LAT E , R OUN D
Ø 38 4 × 2 7 MM , W I T H M OUN T I N G B OR E S F OR 63 MM T-SLOT DI STANC E 30 Nm Ø 20 mm 125
27
384
96 96 96 37
100
20 H7
50 H7
CONVENTIONAL WORKHOLDING
364
100
8x 12,5
8x 19
140
30
30
140
31
ZERO-POINT CLAMPING SYSTEM QUICK•POINT® MULTI PLATES
384
96 96 96
QU IC K • P O IN T ® 96 , 4 - F OLD G R I D P LAT E
384 × 3 8 4 × 2 7 MM , W I T H OUT M OUN T I N G B OR ES 60 Nm Ø 20 mm 125
Applications
32
ZERO-POINT CLAMPING SYSTEM
384
96 96 96
2x 50 H7
126
35
20 H7
63
126
19
12,5
8x
8x
170
70
70
170
QUI C K • P O IN T ® 96 4 - F OLD G R I D P LAT E
384 × 384 × 27 MM, WITH MOUNTING BORES FOR 63 MM T-SLOT DISTANCE 60 Nm Ø 20 mm 125
384
96 96 96
2x 50 H7
100
35
CONVENTIONAL WORKHOLDING
0
20 H7
100
19
12,5
8x
8x
170
30
30
170
33
ZERO-POINT CLAMPING SYSTEM QUICK•POINT® ADAPTOR PLATES
150
27
22
20
96 ±0,01
52
126
Upper Lower
interface: interface:
Applications
52 mm
96 mm
34
ZERO-POINT CLAMPING SYSTEM
157
27
96 ±0,01
20 H7
12 F5
M 4,5
1
10
19
52
12 F5
Upper Lower
interface: interface:
CONVENTIONAL WORKHOLDING
52 mm
CLEANING FAN
96 mm
35
ZERO-POINT CLAMPING SYSTEM QUICK•POINT® RISERS
60/100
60/100
M10
52
16 H6
M10
52
16 H6
96 96
116 116
52
150
52
Upper150 Lower
interface: interface:
QU IC K • P O IN T ® 5 2 , 5 -A X I S R I S E R 30 Nm Ø 16 mm 77 52/96
Applications
36
ZERO-POINT CLAMPING SYSTEM
MAKRO•GRIP ® STAMPING TECHNOLOGY
60/100
96
96
156
192
CONVENTIONAL WORKHOLDING
CLEANING FAN
37
ZERO-POINT CLAMPING SYSTEM QUICK•POINT® RISERS
Quick•Point® Risers
12 F5
M10
60 / 100
52
20 H7
13
50 ±0,01
96
116
100 ±0,01
150
Upper Lower
interface: interface:
QU IC K • P O IN T ® 5 2 , R I S E R Ø 16 mm 77 52/96
12 F5
M10
60 / 100
96
20 H7
13
100 ±0,01
50 ±0,01
156
150 ±0,01
192
Upper Lower
interface: interface:
QU IC K • P O IN T ® 96 , R I S E R Ø 20 mm 125 96
38
ZERO-POINT CLAMPING SYSTEM
Increase accessibility to workpieces on 5-axis machine tools. The coated aluminium
body can either be mounted directly on the machine table or by a Quick•Point ®
plate. The lateral recess can be used for fixation, the alignment is done with 20H7
keyways. Alternatively it can be clamped onto zero-point clamping systems with
4 clamping studs.
176
12 F5
60 / 100
96
246
126 ±0,01
60 ±0,01
Upper Lower
interface: interface:
CONVENTIONAL WORKHOLDING
Individual mounting bores in the area of the flange possible.
Applications
CLEANING FAN
39
ZERO-POINT CLAMPING SYSTEM QUICK•POINT® CLAMPING TOWERS FOR VERTICAL MACHINING CENTRES
50°
150
50°
150
96
96
400
400
0°
12
3x
0°
12
3x
Upper Lower
interface: interface:
415 440 41
The 3-face Pyramid can accept Makro•Grip® 5-Axis Vices 125 with a maximum length of 160 mm when mounted vertically (left),
whereas the maximum length is 210 mm when mounted horizontally (right).
40
ZERO-POINT CLAMPING SYSTEM
Quick•Point® Twin Base
The hardened and ground Twin Base is ideal for manufacturing 5-axis parts with
a 3-axis machine tool. Workpieces can be positioned 4 × 90° safely and with a high
repeat accuracy.
168
110
146 52
Upper Lower
interface: interface:
96
28 116
CONVENTIONAL WORKHOLDING
15
247
158
191,6 96
Upper Lower
interface: interface:
41
ZERO-POINT CLAMPING SYSTEM QUICK•POINT® CLAMPING TOWERS FOR VERTICAL MACHINING CENTRES
Quick•Point® MT3
52
3-face Tombstone
52
104
260
104
260
100
100
96
192
96
192
97
°
120
3x
97
°
120
3x
365
52
104
260
100
96
192
96
°
120
3x
Q UI CK • POI NT ® 52
G R I D P LAT E,
1 0 4 × 1 04 × 27 MM 30 Nm Ø 16 mm 77
42
ZERO-POINT CLAMPING SYSTEM
365
365
Quick•Point® MT4
52
4-face Tombstone
52
104
260
104
260
100
100
96
192
179
179
90°
4x
90°
4x
335
52
96
192
CONVENTIONAL WORKHOLDING
ITEM NO. DIMENSIONS MAX. QTY OF GRID PLATES WEIGHT PRICE
90°
4x
Q UI C K • P O I NT ® 52
2- F OLD GR I D PL AT E,
20 8 × 1 0 4 × 27 MM 30 Nm Ø 16 mm 77
43
ZERO-POINT CLAMPING SYSTEM QUICK•TOWER CLAMPING TOWERS FOR VERTICAL MACHINING CENTRES
1
5
Mounting options
For mounting the Quick•Tower onto the machine tool table there are three options:
Mounted to the Quick•Point® system Mounted to the Quick•Tower Universal Mounted directly to the machine table with
(e.g. 4-fold Grid Plate 96) Base Plate (see page 47) custom bores (price upon request!)
44
Applications
45
CLEANING FAN CONVENTIONAL WORKHOLDING MAKRO•GRIP ® 5-AXIS VICES MAKRO•GRIP ® STAMPING TECHNOLOGY ZERO-POINT CLAMPING SYSTEM
ZERO-POINT CLAMPING SYSTEM QUICK•TOWER CLAMPING TOWERS FOR VERTICAL MACHINING CENTRES
2
19
12 H7
668/860
M10
120 6
25
81
150
82
4
38
2
19
12 H7
668/860
M10
120 6
25
81
150
82
4
38
QU IC K • TOW E R BA S E B ODY
ITEM NO. BODY DIMENSIONS BASE DIMENSIONS TOTAL HEIGHT WEIGHT PRICE
70650 192 × 192 mm 384 × 384 mm 668 mm 160 kg
70850 192 × 192 mm 384 × 384 mm 860 mm 200 kg
If you prefer to fix the tombstone directly onto the machine tool table/pallet using its threads or slots just ask for an individual quotation.
46
ZERO-POINT CLAMPING SYSTEM
Quick•Tower Universal Base Plate
CONVENTIONAL WORKHOLDING
machine tools and/or on different pallets.
The sub-plate can be aligned concentrically using the plate’s Ø 50H7 through
bore and the table’s/pallet’s centre bore accordingly. The axial alignment can
be done by probing the outer faces or adding keyways for T-slot keys. The base
plate is mounted to the table/pallet with DIN EN ISO 4762 cylinder screws. The
fixation of the Quick•Tower is done with 12 × M16 threaded pins that are located
in the four lateral faces of the base plate. These pins fix the Quick•Tower into
position strongly with Quick•Point® clamping studs.
CLEANING FAN
Threaded pin
12 × M16
47
ZERO-POINT CLAMPING SYSTEM QUICK•TOWER CLAMPING TOWERS FOR VERTICAL MACHINING CENTRES
52
12 F5
82 ±0,01
104
28 4x 12 F5
4x 17,5
QU IC K • TOW E R 5 2 , G R I D P LAT E
104 × 10 4 × 2 7 M M 30 Nm Ø 16 mm 77
246
798
246
694
590
590
486
486
382
382
278
278
174
174
81
81
0
0
Tower 70650, height 668 mm, Tower 70850, height 860 mm,
max. 5 pallets on each face. max. 7 pallets on each face.
48
ZERO-POINT CLAMPING SYSTEM
150 0,01
12 F5
CONVENTIONAL WORKHOLDING
246
754
246
562
562
370
370
178
178
81
CLEANING FAN
81
0
0
Tower 70650, height 668 mm, Tower 70850, height 860 mm,
max. 3 pallets on each face. max. 4 pallets on each face.
49
ZERO-POINT CLAMPING SYSTEM QUICK•POINT® ACCESSORIES
Q UI CK • POI NT ® C L AMPI NG ST U DS
F OR I N DI VI DUAL ADAPTAT I ON
ITEM NO. DESCRIPTION UNIT PRICE
Ø 16 mm
45270 for 52 mm spacing, 1 pc.
incl. M 8 threaded pin
Ø 20 mm
45570 for 96 mm spacing, 1 pc.
incl. M 10 threaded pin
Please note: 4 Clamping Studs are required for one Quick•Point® plate!
How it works:
15 17,5
9 11
12,6
8,6
22
28
22
26
M8 M10 12 H6 16 H6
0,7x45°
0,7x45°
0,7x45°
6
0,7x45°
6
6
6
12 H6 16 H6
52 96 52 96
50
ZERO-POINT CLAMPING SYSTEM
Applications:
CONVENTIONAL WORKHOLDING
51
ZERO-POINT CLAMPING SYSTEM QUICK•POINT® ACCESSORIES
Lower
interface:
QU IC K • P O IN T ® 5 2 , S UP P ORT P LAT E S 52
Lower
interface:
QU IC K • P O IN T ® 96 , S UP P ORT P LAT E S 96
52
ZERO-POINT CLAMPING SYSTEM
Quick•Point® Spacer Studs
Spacer studs allow for through holes in material which is clamped directly in the
zero-point system. It also improves accessibility when machining edges and angles.
Applications
53
ZERO-POINT CLAMPING SYSTEM QUICK•POINT® ACCESSORIES
QU IC K • P O IN T ® Q UI C K- LOC K 52
QU IC K • P O IN T ® Q UI C K- LOC K 9 6
54
ZERO-POINT CLAMPING SYSTEM
Easy assembly in a few steps
Within just a few seconds the Quick-Lock fast actuation system is mounted to a Quick•Point® Plate.
With a 180° motion of the lever the Quick-Lock clamps and releases the vice.
CONVENTIONAL WORKHOLDING
Quick-Lock utilisation
The clamping lever equipped with a rotation lock can be used both horizontally and vertically.
For vices and fixtures protruding from the Quick•Point® plate, the lever is used horizontally (right picture).
CLEANING FAN
55
ZERO-POINT CLAMPING SYSTEM QUICK•POINT® ACCESSORIES
Quick•Point® Accessories
Heat-resistant, fibreglass reinforced cover discs for protecting the mounting screws against material pollution.
Cover plugs made of plastic for the protection of the stud holes when not in use. For multi fold plates steel
plugs (see below) are necessary.
Cover plugs made of steel spread the increased clamping force of multi grid plates evenly and protect stud
holes not in use. They can be removed from plates with the Cover Plug Remover.
Comfortable grip with magnet for removing steel plugs from the Quick•Point® plates.
This handle bar facilitates the handling of Quick•Point® devices when setting up and dismantling. As with
usual LANG clamping devices, the handle bar is clamped with two Quick•Point® 96 clamping studs in the
zero-point system and is thereby especially suited for the transportation of heavier Quick•Point® products.
56
ZERO-POINT CLAMPING SYSTEM
Quick•Point® Alignment Accessories
To make the assembly and alignment of the Quick•Point® plates as easy as possible, we offer slot keys for the
plates’ 20H7 keyways matching your table’s t-slots (14 or 18 mm).
Attention: Keys not suitable for Item No. 45800 and 45890!
For the alignment of Quick•Point® plate, Item No. 45890, which has 14 & 18 H7 grooves in the bottom, we offer
CONVENTIONAL WORKHOLDING
455030 50 to 30 mm 1 pc.
455032 50 to 32 mm 1 pc.
455050 50 to 50 mm 1 pc.
For the concentric alignment of Quick•Point® plates via fitting bores in the bottom (12, 25, 50 mm) we offer
centring studs for the most common machine table holes (30, 32, 50 mm).
Item No. 45000-09 is suitable for aligning Quick•Point® plates on aluminum risers, Quick•Tower tombstones
and other, select applications. Bushings 65191-04 and 65191-05 are used for the alignment and mounting of
Makro•Grip® 5-Axis Vices on (old) LANG automation support pallets Item No. 65190 and 65197.
57
ZERO-POINT CLAMPING SYSTEM ALIGNMENT AND MOUNTING OPTIONS
Jig-ground gauging pallet for a quick and precise alignment of Quick•Point® plates.
Recommended especially for rotary tables or chucks.
56
30
A
52
20 H6
0,005 A
96
60
0,01 A
0,01
56
20 H6
30
0,005 A
96
A
0,01 A
56
52
30
0,01
0,01 A
20 H6 0,01
0,005 A
126
60
96 0,01 A
56
0,01 A 0,01
30
0,01
A
96
126
0,01 A
0,01
Quick∙Point® Gauging Pallet 96
QU IC K ∙ P O IN T G AUG I N G PA LLE T
® 126
60
0,01 A
0,01
ITEM NO. FOR DIMENSIONS MEASURING LENGTH WEIGHT PRICE
44252 Quick•Point 52
®
96 × 96 × 56 mm 95 mm per side 2.6 kg
44296 Quick•Point ® 96 126 × 126 × 56 mm 125
126
mm per side 4.2 kg
0,01 A
0,01
How it works:
58
ZERO-POINT CLAMPING SYSTEM
Quick•Point® Alignment Gauge
For easy and quick assembly of the Quick•Point® Grid Plates we recommend using the alignment gauge.
The precise alignment and dimensional accuracy of the plates is guaranteed.
26
90
26
78
26
26
78
0
Alignment Gauge 52
346
20
48
122
144
0
48
48
144
Alignment Gauge 96
ALI G NME NT G AU GE F OR Q UI CK ∙ P OI N T G R I D P L AT ES
®
CONVENTIONAL WORKHOLDING
How it works:
59
ZERO-POINT CLAMPING SYSTEM QUICK•POINT® SERVICE
Quick•Point® Service
96
156
Same Quick•Point® plate
without mounting bores.
These can be installed by
LANG or the customer.
M5 Index bores
Inserting a threaded pin or screw ensures that LANG clamping By default index bores are included in following plates:
devices (with an equivalent recess on the bottom) are always Item No. 45150, 45400, 75600, 75710, 47220 and 47520.
positioned in the correct way on the zero-point plate. M5
8
12
B-B (1 : 1)
M5
8
12
28
B B
B-B (1 : 1)
60 Weitergabe sowie Vervielfaeltigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts nicht gestattet,
soweit nicht ausdrücklich zugestanden. Zuwiderhandlungen verpflichten zu Schadenersatz.
Alle Rechte fuer den Fall der Patenterteilung oder Gebrauchsmuster - Eintragung vorhanden.
Material
Behandlung
Oberfläche
Benennung
ZERO-POINT CLAMPING SYSTEM
Covering mounting bores
Mounting bores in Quick•Point® plates, either prefabricated or
customised by LANG, have a 2.1 mm step. Plastic discs can be
inserted and act as covers to prevent swarf or chips from
clogging these bores. Plastic discs are available in three different
diameters Ø 15 mm, Ø 20 mm and Ø 27 mm (see page 56).
2,1 +0,1
2,1 +0,1
14,6
10,6
18,6
12,6
14 18 19 26
Allgemeintoleranzen
DIN ISO 2768 mK Maßstab 1:1 Rev. -Nr.
Behandlung
Upon request, we can adjust the zero-point system (multi grid or by cutting off the corners. A clean solution that avoids in most
Oberfläche
CONVENTIONAL WORKHOLDING
Benennung
individual grid plates in a row) to round tables of the machine tool cases a protrusion of the zero-point plates to the machine table.
Lang Technik GmbH
Albstraße 1-4 , 73271 Holzmaden
Ersteller
Name pbuehler
Zeichnungsnummer A4
Index Änderungsnr. Datum Ersteller Datum 03.08.2016 LANG Senkungen Blatt 1/1
61
ZERO-POINT CLAMPING SYSTEM
MAKRO•GRIP ®
STAMPING
CONVENTIONAL WORKHOLDING
CLEANING FAN
MAKRO•GRIP® STAMPING TECHNOLOGY
64
ZERO-POINT CLAMPING SYSTEM
Makro•Grip ®
Stamping Technology
→ External Pre-Stamping
→ Form-Closure Technology
Form-Closure clamping offers high holding forces with low
clamping pressure
→ Material Savings
Minimum clamping edge requirements equals less material
CONVENTIONAL WORKHOLDING
removal during subsequent operations
CLEANING FAN
65
MAKRO•GRIP® STAMPING TECHNOLOGY
66
ZERO-POINT CLAMPING SYSTEM
Thanks to exceptional holding power the form-closure technology has many benefits:
Reduced vibrations on
High accuracy INCREASED MILLING QUALITY
workpiece
CONVENTIONAL WORKHOLDING
More options within the
Smaller footprint in machine BETTER USAGE OF CAPACITY
work envelope CLEANING FAN
67
MAKRO•GRIP® STAMPING TECHNOLOGY
5 seconds that revolutionise your machining processes! effect between the stamping contour in the workpiece (truncated
The workpiece is stamped directly on the saw cut or cinder layer of pyramid indents) and the holding teeth of the 5-Axis Vice allows
the blank. Additional preparatory work is generally not necessary. for an accurate repeatability even without endstops.
Stamping is realised within less than 5 seconds. The form-closure
1.500
1.300
900
Standard Stamping Jaws
700
20 25 30 35 40 45
Hardness HRC
68
ZERO-POINT CLAMPING SYSTEM
MAKRO•GRIP ® STAMPING TECHNOLOGY
Machining with the
form-closure grip
Before ←→ After
CONVENTIONAL WORKHOLDING
Width of workpiece:
3 × jaw width of vice
Height of workpiece:
2 × jaw width of vice
CLEANING FAN
69
MAKRO•GRIP® STAMPING TECHNOLOGY
70
ZERO-POINT CLAMPING SYSTEM
MAKRO•GRIP ® STAMPING TECHNOLOGY
MAKRO•GRIP ® 5-AXIS VICES
Tip for your benefit:
Using a side-milling cutter for finishing
CONVENTIONAL WORKHOLDING
parts in one operation
By pre-stamping a workpiece, the force application of the workpiece clamping takes place
outside the machine. This significantly reduces the clamping force to be exerted on a vice.
A small, compact vice is sufficient to clamp oversized workpieces. The form-closure effect
created by pre-stamping makes it possible to safely pick up a component at its smallest
cross-section and clamp it edgewise and for ideal accessibility. Now a large number of
components can be machined in one clamping process before finishing the workpiece
with a side-milling cutter.
CLEANING FAN
71
MAKRO•GRIP® STAMPING TECHNOLOGY MAKRO•GRIP® STAMPING UNIT
5 9
3 2
8
7 10
Rear view
1 Operated pneumatically by hand or foot 6 Robust steel hydraulic housing with integrated T-slot key
2 Pneumatic-hydraulic power multiplier with visible 7 Scaled endstop for quick positioning of blanks
oil-level display
8 Stamping jaws for all materials up to 35 HRC / 45 HRC
3 Makrolon protection shield
9 Conventient adjustment of the stamping pressure
4 Easily readable hydraulic pressure gauge
10 Quick connection system consisting of quick connector
5 Quick adjustment of stamping with for different part sizes and quick connector socket
MAX. STAMPING
ITEM NO. TYPE TYPE OF STAMPING JAWS WEIGHT PRICE
RANGE
Standard stamping jaws for materials
41200 Standard 245 mm 76 kg
up to 35 HRC
Standard stamping jaws for materials
41350 Extended 355 mm 84 kg
up to 35 HRC
High-End stamping jaws for materials
41200-HE Standard 245 mm 76 kg
up to 45 HRC
High-End stamping jaws for materials
41350-HE Extended 355 mm 84 kg
up to 45 HRC
Scope of delivery: —— Stamping vice —— Gauging blocks for measuring wear of stamping teeth
—— Stamping jaws with parallels, 3 mm —— Scaled workpiece endstop
—— Pneumatic-hydraulic power multiplier (1 – 360 bar) —— Protection shield
72
ZERO-POINT CLAMPING SYSTEM
Stamping trolley with Makro•Grip® Stamping Unit,
Standard
CONVENTIONAL WORKHOLDING
STA M P IN G TR O L L E Y W I T H M A K R O• G R I P ® S TA MPI NG U NI T, STANDAR D
MAX. STAMPING
ITEM NO. TYPE TYPE OF STAMPING JAWS WEIGHT PRICE
RANGE
Standard stamping jaws for
41521 Standard 245 mm 210 kg
material up to 35 HRC
High-End stamping jaws for
41521-HE Standard 245 mm 210 kg
material up to 45 HRC
73
MAKRO•GRIP® STAMPING TECHNOLOGY MAKRO•GRIP® STAMPING UNIT
1 Large stamping range up to 355 mm 3 T-slot plate included allowing a second stamping unit to be
retrofitted easily with marking bores or T-slot
2 Practical, rigid trolley for a flexible and mobile use
MAX. STAMPING
ITEM NO. TYPE TYPE OF STAMPING JAWS WEIGHT PRICE
RANGE
Standard stamping jaws for material
41400 Extended 355 mm 300 kg
up to 35 HRC
High-End stamping jaws for material
41400-HE Extended 355 mm 300 kg
up to 45 HRC
Additional extended stamping Standard stamping jaws for material
41140 355 mm 50 kg
vice for dual stamping up to 35 HRC
Additional extended stamping High-End stamping jaws for material
41140-HE 355 mm 50 kg
vice for dual stamping up to 45 HRC
74
ZERO-POINT CLAMPING SYSTEM
Stamping trolley with Makro•Grip® Dual Stamping Unit,
extended, on T-slot plate
CONVENTIONAL WORKHOLDING
holding teeth.
MAX. STAMPING
ITEM NO. TYPE TYPE OF STAMPING JAWS WEIGHT PRICE
RANGE
Standard stamping jaws for material
41402 Extended 2 × 355 mm 350 kg
up to 35 HRC
High-End stamping jaws for material
41402-HE Extended 2 × 355 mm 350 kg
up to 45 HRC
75
MAKRO•GRIP® STAMPING TECHNOLOGY MAKRO•GRIP® STAMPING UNIT
CE N T R E MAR K I NG TOOL
ITEM NO. DESCRIPTION PRICE
41010 Centre marking tool
41010-01 Spare marking stud
The centre marking tool will be mounted to the moveable jaw of the stamping unit with two M 6 × 14 screws
(included).
Creating trust! Always the same clamping quality. To ensure consistent holding power in
the clamping device, it is necessary to check the wear of the stamping teeth regularly.
Position one gauging block with slots on each side Make sure that the stamping teeth are placed in the When the indicator block fits between the
of the stamping jaws. Tighten the jaws by hand only, grooves of the gauging blocks. stamping contour, the jaws need to be sent in for
do not actuate the switch! reconditioning.
76
ZERO-POINT CLAMPING SYSTEM
Stamping Jaws –
Standard and High-End version
CONVENTIONAL WORKHOLDING
R ECON DI T I ONI NG STAMPI NG JAWS
ITEM NO. VERSION PRICE
41111-01 Standard stamping jaws
41112-01 High-End stamping jaws
When the stamping teeth are worn out the jaws can be reconditioned up to 6 times per pair. The original
thickness of a stamping jaw is 18 mm. With every reconditioning process the thickness is reduced by 0.5 mm
until it has reached 15 mm (measured at the highest stamping tooth tip). If a stamping tooth is broken off
more than the regular 0.5 mm per reconditioning is required. The total amount of possible reconditioning
processes is reduced accordingly.
Note for dual stamping: With every reconditioning process we generally supply shims. The thickness of
these shims is determined by the remaining thickness of the stamping jaw. Thickness of stamping jaw and
shim will always amount to 18 mm. This guarantees that stamping jaws which have been reconditioned at
different intervals can be used together, applying the same pressure on the workpiece.
CLEANING FAN
Tip for your In order to bridge the time of the reconditioning process we suggest
keeping a second pair of stamping jaws in reserve!
benefit:
77
ZERO-POINT CLAMPING SYSTEM
MAKRO•GRIP ®
CONVENTIONAL WORKHOLDING
CLEANING FAN
MAKRO•GRIP® RAW PART CLAMPING
80
ZERO-POINT CLAMPING SYSTEM
Makro•Grip ®
5-Axis Vice
→ Accessibility
→ Holding Force
Highest holding forces at lowest clamping pressure due
to form-closure clamping
→ Handling
Lightweight construction for ergonomic handling
CONVENTIONAL WORKHOLDING
CLEANING FAN
81
MAKRO•GRIP® RAW PART CLAMPING
Makro•Grip® Technology
Compact and unmatched holding power for the 5-sided machining of blanks and unfinished parts
6 1
7
8
4
10
11
1 Makro•Grip® jaws with double-sided holding teeth contour 7 Clamping edge requirement of 3 mm guarantees ideal
(same toothing for all types of vices) accessibility for tools and enormous material savings
3 Special Tungsten-Carbide Coating can be applied on the 9 Rigid and sturdy base for great longevity. All LANG jaw types
plain clamping surfaces in order to increase friction when within the size group can be mounted to this base
clamping non-stamped parts
10 Integrated with clamping studs for precise clamping in the
4 Clamping jaws milled from solid case-hardened steel for Quick•Point® zero-point clamping system
maximum stability
11 Additional bores/threads can be drilled in the bottom of the
5 Thread for mounting an endstop base body to adapt the Makro•Grip® 5-Axis Vice to other
zero-point systems
6 The patented reversible jaws are changed over within one
minute. A larger clamping range is achieved and interferences
are eliminated
82
ZERO-POINT CLAMPING SYSTEM
All improvements at a glance:
CONVENTIONAL WORKHOLDING
F
83
MAKRO•GRIP® RAW PART CLAMPING
The patented reversible jaws are changed over within one minute. A special Tungsten-Carbide Coating can be applied on the plain
A larger clamping range is achieved and interferences are eliminated. clamping surfaces of the Makro•Grip® jaws in order to double the
friction force when clamping non-stamped parts.
84
ZERO-POINT CLAMPING SYSTEM
Form-closure technology
Clamping force [N] Thanks to the form-closure technology, workpieces can be securely
20.000 clamped with low clamping pressure. Deformation and distortion
18.000
of the material while clamping and releasing is impossible! This
diagram highlights the relation between the clamping pressure
16.000
and the resulting clamping force.
14.000
4.000
2.000
CONVENTIONAL WORKHOLDING
85
MAKRO•GRIP® RAW PART CLAMPING MAKRO•GRIP ® 5-AXIS VICE
MAK R O • G R IP ® 5 -A X I S V I CE 7 7,
J AW W IDTH 4 6 MM 52 Ø 16 mm max. 70 Nm max. 14,000 N ± 0.02 mm
86
ZERO-POINT CLAMPING SYSTEM
ma 52
x /
12H6 maa . Te52i 75
m
x l e/7g
12H6
M8 ma x. .pTa 5rö
x. eriltesgi ße
10
2/
52 10 130 77
2/1
52 30 77
65 65
38
0
mm
0
mm
22
12 12
CONVENTIONAL WORKHOLDING
22
Applications
CLEANING FAN
87
MAKRO•GRIP® RAW PART CLAMPING MAKRO•GRIP ® 5-AXIS VICE
MAK R O • G R IP ® 5 -A X I S V I CE 7 7,
J AW W IDTH 7 7 M M 52 Ø 16 mm max. 70 Nm max. 14,000 N ± 0.02 mm
COMPARABLE
ITEM NO. BASE LENGTH CLAMPING RANGE WEIGHT PRICE
PREVIOUS VERSION
48085-77 102 mm 0 – 85 mm 2.3 kg 47085
48120-77 130 mm 0 – 120 mm 2.9 kg 47120
48160-77 170 mm 0 – 160 mm 3.5 kg 47160
48200-77 210 mm 0 – 200 mm 4.2 kg 47200
88
ZERO-POINT CLAMPING SYSTEM
552
m 2//77
ma 0
m axx. 0//111
ma . TTe 100/
axx. eiille /115
12H6
12H6 . p e grö 500
g
pa arrtt rö ß
M8
M8 ssiiz ße e
ze
e
62
62
51
51
38
38
65
65
0
0
mm
12mm
22
22
12
CONVENTIONAL WORKHOLDING
Applications
CLEANING FAN
89
MAKRO•GRIP® RAW PART CLAMPING MAKRO•GRIP® 5-AXIS VICE
90
Spare jaws and parts are still available for previous vice versions (page 138/139)
S PA R E S PI NDL E + C ENT R E PI EC E
F OR M A KR O•GR I P ® 5-AX I S VI C E 7 7
ITEM NO. FOR SPINDLE LENGTH WEIGHT PRICE
Threaded spindle with low-wear TIN coating with internal hexagon (size 5) and external hexagon (size 12).
Wrenches for pre-adjusting the clamping range, initial clamping setting (external hexagon) and reversing the
H E XAG ON SOC K ET
ITEM NO. SQUARE DRIVE SIZE PRICE
45508 3/8" 12 mm
Hexagon Socket (DIN 3120) for a consistent and safe clamping process.
CONVENTIONAL WORKHOLDING
ITEM NO. FOR SIZE PRICE
47005 Internal Hexagon 5 mm
The cordless drill attachment is used to achieve centring accuracy of the jaws easier when exchanging them,
especially with longer vice bases. You will also speed-up the exchange or reversal of jaws by using the cordless
drill attachment.
Service
A special Tungsten-Carbide-Coating can be applied on the jaws’ planar surfaces in order to intensify the
friction when clamping non-stamped workpieces.
(Attention: Included in price is only the coating, not the jaws.)
91
MAKRO•GRIP® RAW PART CLAMPING MAKRO•GRIP ® 5-AXIS VICE
MAK R O • G R IP ® 5 -A X I S V I CE 1 25 ,
J AW W IDTH 7 7 M M 96 Ø 20 mm max. 100 Nm max. 20,000 N ± 0.02 mm
92
ZERO-POINT CLAMPING SYSTEM
16H6 ma 72
16H6 max. 72/12
m
M10 ma x. Teil/120
M10 axx. pTe eg 0
. pairltegrröße
ar siz öß
16
160/2 5
0/210 125
96 10 12
96
155/205
8989
0
0
mm
22
mm
22
1515
CONVENTIONAL WORKHOLDING
Applications
CLEANING FAN
93
MAKRO•GRIP® RAW PART CLAMPING MAKRO•GRIP ® 5-AXIS VICE
MAK R O • G R IP ® 5 -A X I S V I CE 1 25 ,
J AW W IDTH 12 5 M M 96 Ø 20 mm max. 100 Nm max. 20,000 N ± 0.02 mm
COMPARABLE
ITEM NO. BASE LENGTH CLAMPING RANGE WEIGHT PRICE
PREVIOUS VERSION
48155-125 160 mm 0 – 155 mm 8.4 kg 47155
48205-125 210 mm 0 – 205 mm 10.2 kg 47205
48255-125 260 mm 0 – 255 mm 12.1 kg 47255
48305-125 310 mm 0 – 305 mm 14.0 kg 47305
48355-125 360 mm 0 – 355 mm 15.9 kg 47355
94
ZERO-POINT CLAMPING SYSTEM
90
90/125
m/a12 /1
max.5T/175/2
m e7
ma xx. ile5/ 25/
20H6 ax. pTeailegr2ö2ß5/275
20H6 . p rt sgr e27
M10 art izö ß 5
M10 size e
e
155/205/255/305/355
125
8989
0
0
15mm
22
15mm
22
CONVENTIONAL WORKHOLDING
Applications
CLEANING FAN
95
MAKRO•GRIP® RAW PART CLAMPING MAKRO•GRIP ® 5-AXIS VICE
96
Spare jaws and parts are still available for previous vice versions (page 138/139)
S PA R E S PI NDL E + C ENT R E PI EC E
F OR M A KR O•GR I P ® 5-AX I S VI C E 1 25
ITEM NO. FOR SPINDLE LENGTH WEIGHT PRICE
Threaded spindle with low-wear TIN coating with internal hexagon (size 5) and external hexagon (size 15)
H E XAG ON SOC K ET
ITEM NO. SQUARE DRIVE SIZE PRICE
45509 3/8" 15 mm
Hexagon Socket (DIN 3120) for a consistent and safe clamping process.
CONVENTIONAL WORKHOLDING
COR D LE SS DR I L L AT TAC HMENT
ITEM NO. FOR SIZE PRICE
47005 Internal Hexagon 5 mm
The cordless drill attachment is used to achieve centring accuracy of the jaws easier when exchanging them,
especially with longer vice bases. You will also speed-up the exchange or reversal of jaws by using the cordless
drill attachment.
Service
A special Tungsten-Carbide-Coating can be applied on the jaws’ planar surfaces in order to intensify the
friction when clamping non-stamped workpieces.
(Attention: Included in price is only the coating, not the jaws.)
97
MAKRO•GRIP® RAW PART CLAMPING MAKRO•GRIP ® DUAL CLAMPING VICE
3 2
Please read all about the Makro•Grip® 5-Axis Vice's features on page 82.
1 Scope of delivery: Centre jaw with double-sided holding 3 Conception of the centre piece allows to clamp workpieces
tooth contour and threaded spindle with 2 mm variance in length (cutting tolerance)
Depending on the part size the operator might be able to clamp 4 parts in one The centre jaw can now also be mounted to the Makro•Grip® 5-Axis Vice for
vice at the same time and thus increase spindle run times. Robo-Trex automation. This increases the capacity of the automation system
significantly.
98
ZERO-POINT CLAMPING SYSTEM
Transform your Makro•Grip® 5-Axis Vice into a Dual Clamping Vice
CONVENTIONAL WORKHOLDING
Insert centre jaw and spindle and tighten the screws on the bottom side. Assemble the Makro•Grip® jaws back onto the base. You are now able to use your
Makro•Grip® 5-Axis Vice as a dual vice.
CLEANING FAN
99
MAKRO•GRIP® RAW PART CLAMPING MAKRO•GRIP ® DUAL CLAMPING VICE
12H6
M8 12H6
2x
M8 35/5
0 2x
30
/45
10
2/1 10
30 2/1
52 52 77 30 77
ITEM NO. FOR MAKRO•GRIP® CENTRE JAW WIDTH SPINDLE LENGTH CLAMPING RANGE PRICE
48085-TG4617 48085-46 17 mm 100 mm 2 × 35 mm
48085-TG4627 48085-46 27 mm 100 mm 2 × 30 mm
48120-TG4617 48120-46 17 mm 135 mm 2 × 50 mm
48120-TG4627 48120-46 27 mm 135 mm 2 × 45 mm
2x
35 2x
/50
/70 30
/45
12 H6 /90 /65
12 H6 /85
M8
M8
10 10
2/1 2/1
30 30
/17 /17
52 0/2 52 0/2
10 77 10 77
ITEM NO. FOR MAKRO•GRIP® CENTRE JAW WIDTH SPINDLE LENGTH CLAMPING RANGE PRICE
48085-TG7717 48085-77 17 mm 100 mm 2 × 35 mm
48085-TG7727 48085-77 27 mm 100 mm 2 × 30 mm
48120-TG7717 48120-77 17 mm 135 mm 2 × 50 mm
48120-TG7727 48120-77 27 mm 135 mm 2 × 45 mm
48160-TG7717 48160-77 17 mm 175 mm 2 × 70 mm
48160-TG7727 48160-77 27 mm 175 mm 2 × 65 mm
48200-TG7717 48200-77 17 mm 215 mm 2 × 90 mm
48200-TG7727 48200-77 27 mm 215 mm 2 × 85 mm
Centre jaws are still available for previous versions (page 139).
100
ZERO-POINT CLAMPING SYSTEM
Makro•Grip® 5-Axis Vice 125
Centre Jaw and Spindle
ITEM NO. FOR MAKRO•GRIP CENTRE JAW WIDTH SPINDLE LENGTH CLAMPING RANGE PRICE
48155-TG2527 48155-125 27 mm 164 mm 2 × 60 mm
CONVENTIONAL WORKHOLDING
48205-TG2527 48205-125 27 mm 214 mm 2 × 85 mm
48255-TG2527 48255-125 27 mm 264 mm 2 × 110 mm
48305-TG2527 48305-125 27 mm 314 mm 2 × 135 mm
48355-TG2527 48355-125 27 mm 364 mm 2 × 160 mm
Centre jaws are still available for previous versions (page 139).
CLEANING FAN
101
ZERO-POINT CLAMPING SYSTEM
CONVENTIONAL
WORKHOLDING
110 Avanti 77
114 Avanti 125
118 Profilo 77
CONVENTIONAL WORKHOLDING
120 Profilo 125
124 Vario•Tec 77
126 Vario•Tec 125
CLEANING FAN
CONVENTIONAL WORKHOLDING
104
ZERO-POINT CLAMPING SYSTEM
Conventional
Workholding
→ Flexibility
One vice body for all jaw types
→ Versatility
Suitable for almost any clamping task in milling
CONVENTIONAL WORKHOLDING
Fast jaw change over a variety of clamping configurations
CLEANING FAN
105
CONVENTIONAL WORKHOLDING PRECI•POINT COLLET CHUCK
2 M6 tapped hole to use an endstop 4 Integrated with clamping studs for precise clamping
in the Quick•Point® zero-point clamping system
106
ZERO-POINT CLAMPING SYSTEM
99
52
Preci•Point Collet Chuck
6 bis 34
52
38 H7
M6
10
27
15
39
6 bis 34
P R EC I • P O I NT COL L ET C HU C K 52 ± 0.02 mm
ca. 111
ITEM NO. DIMENSIONS WEIGHT PRICE
41052 38 H7 Ø 99 × 111 mm 3.0 kg
M6
10
39
Collets for ER 50
CONVENTIONAL WORKHOLDING
The collets are available in 1 mm steps for Ø 6 to Ø 34 mm.
The extension of the item number refers to the max. clamping range of the collet.
Example: Collet with max. Ø 20 mm has the item number 41000-20.
Clamping range: − 1,0 mm
P R EC I • P O I NT C L AMPI NG W R ENC H
ITEM NO. PRICE
41052-03
CLEANING FAN
107
CONVENTIONAL WORKHOLDING
Avanti Technology
The universal vice with great handling characteristics and unbeatable add-on jaw prices!
3
2
7
Large-volume steel or aluminium add-
on jaw allows contours to be added on
both sides of the jaws to use it for two
4
different clamping applications.
1 Precise positioning of jaws thanks to patented 5 Add-on jaws available in steel or aluminium
clamping interface
6 Changing the jaws rapidly with only one screw
2 Centring accuracy ± 0.02 mm (internal hexagon 5 mm)
3 Double guided jaws 7 Rigid and sturdy base – but still lightweight and handy
108
ZERO-POINT CLAMPING SYSTEM
Avanti Quick Jaw Exchange System applications
CONVENTIONAL WORKHOLDING
prisms, a special Avanti adaptor jaw can be offered and
manufactured upon request, making the system even
more versatile.
An individual borehole pattern (e.g. tapped holes or
fittings) enables the simple assembly of your clamping
fixture. Combine the benefits of the Avanti quick jaw
exchange system with your own fixtures!
CLEANING FAN
109
CONVENTIONAL WORKHOLDING AVANTI QUICK JAW EXCHANGE SYSTEM
Avanti 77
m
maa 9977
//
maaxx..TTee 112255
m
12
12 H6
H6 xx.. ilie le
AVANT I 7 7, JAW W I DT H 4 6 M M ppaa ggrröö
M8
M8 rrttss ßßee 52 Ø 16 mm max. 70 Nm max. 14,000 N ± 0.02 mm
izizee
COMPARABLE
ITEM NO. BASE LENGTH MAX. CLAMPING RANGE WEIGHT PRICE
PREVIOUS VERSION
44085-46 102 mm 97 mm 2.2 kg 44065
44120-46* 130 mm 125 mm 2.6 kg 44105
*automatable
1100
22//11
3300 7777
of contour
contour
52
52
max. Konturtiefe
Konturtiefe
depth of
19
19
max. depth
max.
ma 97
38
38 57
57 /
ma x. Te 125
max.
12 H6 x. ileg
pa rö
M8 rt s ße
74
74 ize
26
26
48
48
38
38
53
53
00 10
2/1
30 77
12 mm
mm
52
max. Konturtiefe
12
22
22
19
38 57
74
26
110
48
38
ZERO-POINT CLAMPING SYSTEM
AVA N T I 7 7 BASE JAWS, JAW WI DT H 46 MM
COMPARABLE
12 H6 2x
65
13
0 77
52
CONVENTIONAL WORKHOLDING
Add-on jaws fit the new base jaw version and also the previous one.
CLEANING FAN
111
CONVENTIONAL WORKHOLDING AVANTI QUICK JAW EXCHANGE SYSTEM
Avanti 77
ca
ma . 125
/
AVANT I 7 7, JAW W I DT H 7 7 M M ma x. Te 165/ 52 Ø 16 mm max. 70 Nm max. 14,000 N ± 0.02 mm
x. ileg 205
12H6 pa rö
rt s ße
M8 ize
COMPARABLE
ITEM NO. BASE LENGTH MAX. CLAMPING RANGE WEIGHT PRICE
PREVIOUS VERSION
44120-77* 130 mm 125 mm 3.5 kg 44120
44160-77 170 mm 165 mm 4.2 kg 44160
44200-77 210 mm 205 mm 4.8 kg 44200
13
*automatable 0/1
70
/21
0 77
max. depth of contour
max. Konturtiefe
52
29/49
ca
ma . 125
57 77 /
ma x. Te 165/
x. ileg 205
12H6 pa rö
87/107 rt s ße
M8 ize
36/56
51
38
56
13
0/1
0 70
/21
0 77
max. depth of contour
12 mm
max. Konturtiefe
22 52
29/49
57 77
87/107
36/56
112
51
ZERO-POINT CLAMPING SYSTEM
AVA N T I 7 7 BASE JAWS, JAW WI DT H 7 7 MM
COMPARABLE
21 21
0 0
52 52
77 77
CONVENTIONAL WORKHOLDING
Add-on jaws fit the new base jaw version and also the previous one.
113
CONVENTIONAL WORKHOLDING AVANTI QUICK JAW EXCHANGE SYSTEM
Avanti 125
21
0
ma /260
/
ma x. Te 310
16H6 x. ileg /360
pa rö
AVANT I 12 5M10
, JAW W I DT H 1 25 M M rt s ße96 Ø 20 mm max. 100 Nm max. 20,000 N ± 0.02 mm
ize
21
0
ma /260 COMPARABLE
ITEM NO. BASE LENGTH MAX. CLAMPINGmRANGE
x. /3 WEIGHT PRICE
16H6 ax Teile 10/3 PREVIOUS VERSION
. p gr 60
M10 art öß
44205-125* 210 mm 210 mm siz e 11.3 kg 44205
e
44255-125 260 mm 260 mm 13.2 kg 44255
44305-125 310 mm 21 310 mm 15.1 kg 44305
0/2
60
44355-125 360 mm /31 360 mm 16.9 kg 44355
0/3
21 60 2 5
*automatable 96 0/2 1
60
/31
0/3
60 5
96 12
max.Konturtiefe
max. depth of
contour
39/69
max.Konturtiefe
of
21
max. depth
0
contour
ma /260
39/69
/
ma x. Te 310
16H6 x. ileg /360
126 pa rö
77 M10 rt s ße
ize
77 126
116
46/76
116
46/76
70
5770
57 21
0/2
77
60
77
/31
0/3
60 5
00 96 12
15 mm
15 mm
2222
max.Konturtiefe
max. depth of
contour
39/69
77 126
116
46/76
114
70
57
ZERO-POINT CLAMPING SYSTEM
AVA N T I 125 BASE JAWS
COMPARABLE
2x 2x
90
/1 90/1
15
/1 15/1
40
/1 40/1
16 H6 16 H6 65 65
21
0/2 210/
60 260
/31 /3
96 96 0/3 10/
60 360
5 5
12 12
CONVENTIONAL WORKHOLDING
44355-TG125 364 mm (Ø 20 mm) 44355-125 2.3 kg
Add-on jaws fit the new base jaw version and also the previous one.
115
CONVENTIONAL WORKHOLDING
Profilo Technology
Your clamping system for all shaped parts
1 2
1 Case-hardened, double guided base jaws with keyways 4 Add-on jaws available in steel or aluminium
2 Centring accuracy ± 0.02 mm 5 Rigid and sturdy base - but still lightweight and handy
Mounting options
Soft add-on jaws mounted from beneath with 4 screws. Thanks to threads in the base jaws, add-on jaws can also be mounted from the
top for better accessibility towards the screws.
116
ZERO-POINT CLAMPING SYSTEM
Self-made Profilo add-on jaws
The versatile Profilo system allows you to manufacture your own, customised add-on jaws for your LANG vice.
The drawings below show you how to machine your jaws. The drawings and 3D models can also be downloaded from our website.
43
32
57
35
24
57
63,5
20,5
20,5
63,5
47,5
12,5
0
12,5
47,5
160
112
12
10
4x M10
4x M8
0,4 0,8 1,6 3,2 6,3 Allgemeintoleranzen Projektionsmethode 1 DIN ISO 2768 mK Maßstab 1:2
DIN ISO 2768 mK Maßstab 1:1.5
CONVENTIONAL WORKHOLDING
Weitergabe sowie Vervielfaeltigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts nicht gestattet,
Weitergabe sowie Vervielfaeltigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts nicht gestattet,
soweit nicht ausdrücklich zugestanden. Zuwiderhandlungen verpflichten zu Schadenersatz. Material 1.7131 (16Mn Cr5)
soweit nicht ausdrücklich zugestanden. Zuwiderhandlungen verpflichten zu Schadenersatz. Material 1.7131Alle
(16Mn Cr5)
Rechte fuer den Fall der Patenterteilung oder Gebrauchsmuster - Eintragung vorhanden.
Alle Rechte fuer den Fall der Patenterteilung oder Gebrauchsmuster - Eintragung vorhanden. Datum Name Behandlung
Datum Name Behandlung Bearb. 04.03.15 Seinemeyer Oberfläche
Bearb. 04.03.15 Seinemeyer Oberfläche Gepr. Benennung
Gepr. Benennung Norm Aufsatzbacke Konturspanner 125
Norm Aufsatzbacke Konturspanner 77 Stahl
Stahl
Zeichnungsnummer A4
Zeichnungsnummer
Index Änderungsnr.
A4
Datum Ersteller 49258 Blatt 1/1
Index Änderungsnr. Datum Ersteller 49778 Blatt 1/1
CLEANING FAN
117
CONVENTIONAL WORKHOLDING PROFILO CONTOUR JAW SYSTEM
Profilo 77
10
0
ma /130
/
P ROFILO 12H6
77 ma x. Te 170 52 Ø 16 mm max. 70 Nm max. 14,000 N ± 0.02 mm
M8 x. ileg /21
pa rö 0
rt s ße
ize COMPARABLE
ITEM NO. BASE LENGTH MAX. CLAMPING RANGE WEIGHT PRICE
PREVIOUS VERSION
1
49010-77 102 mm 100 mm m 00/1 3.2 kg 49010
a 30/
12H6 ma x. Te 170
49040-77 M8
130 mm 130 mm x. ileg /21 3.6 kg 49040
pa rö 0
rt s ße
49080-77 170 mm 170 mm ize 4.3 kg 49080
49120-77 210 mm 1 210 mm 5.0 kg 49120
0 2/1
30
/17
52 0/2
max. depth of contour
10 77
max. Konturtiefe
10
2/1
30
/17
52 0/2
max. depth of contour
10 77
36
max. Konturtiefe
36
57 112 10
0
ma /130
/
12H6 ma x. Te 170
57 88,5 112 M8 x. ileg /21
pa rö 0
rt s ße
ize
88,5
52,5
38 52,5
52,5
38
52,5
10
2/1
0 0
30
/17
12 mm
52 0/2
12 mm
10 77
22 22
max. Konturtiefe
36
57 112
88,5
118 52,5
38
2,5
ZERO-POINT CLAMPING SYSTEM
P R OF I LO 7 7 BASE JAWS
COMPARABLE
12 H6
12 H6 M8
M8
17
52 0/2
17 10
52 0/2
10
77
77
COMPARABLE
ITEM NO. SPINDLE LENGTH (+Ø) FOR PROFILO WEIGHT PRICE
PREVIOUS VERSION
49080-TG77 175 mm (Ø 16 mm) 49080-77 0.9 kg 49080-TG
CONVENTIONAL WORKHOLDING
49120-TG77 215 mm (Ø 16 mm) 49120-77 1.0 kg 49120-TG
Add-on jaws fit the new base jaw version and also the previous one.
CLEANING FAN
119
CONVENTIONAL WORKHOLDING PROFILO CONTOUR JAW SYSTEM
Profilo 125
/36 12
max. depth of
96 0
contour
max.Konturtiefe
max. depth47of
15
contour
5/2
ma 05/2
47
5
57 16H6 ma x. Te 5/30
160 x. ileg 5/3
pa rö
57 M10 rt s ße 55
124 160 ize
124
77
77
57
57
77
16
77
0/2
10
/26
0/3
00 10 5
/36 12
15 mm
15 mm
96 0
22
22
max.Konturtiefe
max. depth of
contour
47
57 160
124
77
120 57
77
ZERO-POINT CLAMPING SYSTEM
P R OF I LO 1 25 BASE JAWS
COMPARABLE
2x
10 2x
0/ 10
12 0/
5/ 12
15 5/
0/ 15
17 0/
16 H6 5 17
16 H6 5
M10
21
0/2 21
60 0/2
/31
0/3 60/3
96 60 10
/ 36 5
96 0 12 5
12
COMPARABLE
ITEM NO. SPINDLE LENGTH (+Ø) FOR PROFILO WEIGHT PRICE
PREVIOUS VERSION
49100-TG125 214 mm (Ø 20 mm) 49100-125 2.5 kg 49100-TG
CONVENTIONAL WORKHOLDING
49150-TG125 264 mm (Ø 20 mm) 49150-125 2.6 kg 49150-TG
49200-TG125 314 mm (Ø 20 mm) 49200-125 2.7 kg 49200-TG
49250-TG125 364 mm (Ø 20 mm) 49250-125 2.9 kg 49250-TG
Add-on jaws fit the new base jaw version and also the previous one.
CLEANING FAN
121
CONVENTIONAL WORKHOLDING
Vario•Tec Technology
The convenient and versatile clamping solution for (semi-)finished parts.
1
2
3
4
2 Channels for blowing out pins 5 Integrated with clamping studs for precise clamping
in the Quick•Point® zero-point clamping system
3 Rigid and sturdy base for great longevity
6
10 Jaws are sealed up front and mounted from behind through
the carrier jaw. No swarf clogging possible!
11 Pin jaws are guided in the base for a highly accurate location
to one another.
122
ZERO-POINT CLAMPING SYSTEM
Applications
CONVENTIONAL WORKHOLDING
Maintenance recommendation
123
CONVENTIONAL WORKHOLDING VARIO•TEC SUPPORT AND RESTING
Vario•Tec 77
VAR IO • T12H6
EC 7 7 52 Ø 16 mm max. 70 Nm max. 14,000 N ± 0.02 mm
M8
COMPARABLE
ITEM NO. BASE LENGTH MAX. CLAMPING RANGE WEIGHT PRICE
12H6 PREVIOUS VERSION
M8
42057-77* 130 mm 55 mm 3.3 kg 42057
42097-77 170 mm 95 mm 4.0 kg 42097
42137-77 210 mm 13 135 mm 4.6 kg 42137
0/1
70
/21
*automatable 13 0
0/1
70 77
52 /21
0
77
52
57/97/137 77
57/97/137 77
12H6
63 M8
63
38
65
38
65
13
0 0/1
0 70
/21
12 mm
12 mm
0
22 22 77
52
57/97/137 77
124
63
ZERO-POINT CLAMPING SYSTEM
25
21
17
13
9
0
4
10
27
25
21
17
13
9
0
4
COMPARABLE
ITEM NO. DESCRIPTION UNIT WEIGHT PRICE
PREVIOUS VERSION
1 set (2 pin jaws +
42018-77 Spare Jaws 1.2 kg 42077
2 carrier jaws)
CONVENTIONAL WORKHOLDING
ACCE S S OR I ES VAR I O•T EC 7 7
O-Rings Ø 2 × 1.5 mm
200009 100 pcs.
for spare pins Ø 4 mm
CLEANING FAN
125
CONVENTIONAL WORKHOLDING VARIO•TEC SUPPORT AND RESTING
Vario•Tec 125
16H6
M10
VAR IO • T EC 12 5 96 Ø 20 mm max. 100 Nm max. 20,000 N ± 0.02 mm
16H6 COMPARABLE
ITEM NO. M10 BASE LENGTH MAX. CLAMPING RANGE WEIGHT PRICE
PREVIOUS VERSION
42102-125* 210 mm 100 mm 12.3 kg 42102
42152-125 260 mm 150 mm 14.2 kg 42152
42202-125 310 mm 210 200 mm 16.0 kg 42202
/26
42252-125 360 mm 0/3 250 mm 17.9 kg 42252
1 0/3
21 60
0/2 5
*automatable96 60 12
/31
0/3
60 5
96 12
16H6
M10
100/150/200/250 125
100/150/200/250 125
93
93
57
97
57
97
21
0/2
60
/31
0 0 0/3
60 5
15 mm
12
mm
22 22 96
15
93
ZERO-POINT CLAMPING SYSTEM
36
30
24
18
12
0
6
15
40
36
30
24
18
12
0
6
15
COMPARABLE
ITEM NO. DESCRIPTION UNIT WEIGHT PRICE
PREVIOUS VERSION
1 set (2 pin jaws +
42018-125 Spare Jaws 4.7 kg 42125
2 carrier jaws)
CONVENTIONAL WORKHOLDING
ACCE S S OR I ES VAR I O•T EC 1 25
O-Rings Ø 3.5 × 2 mm
200010 100 pcs.
for spare pins Ø 6 mm
CLEANING FAN
127
FAN
CLEANING
CONTENTS
CLEANING FAN CONVENTIONAL WORKHOLDING MAKRO•GRIP ® 5-AXIS VICES MAKRO•GRIP ® STAMPING TECHNOLOGY ZERO-POINT CLAMPING SYSTEM
CLEANING FAN
130
ZERO-POINT CLAMPING SYSTEM
Clean•Tec
Cleaning Fan
→ Cleanliness
→ Energy Savings
Expensive compressed air not needed
→ Unmanned Cleaning
Especially essential in the automated production
CONVENTIONAL WORKHOLDING
CLEANING FAN
131
CLEANING FAN
Clean•Tec Technology
1
2
1 Fibreglass compound body with steel centre core. 3 Strong and wear-resistant carbon fibre wings for best
Can be clamped in every common shank Ø 20 mm durability – even with tough chipping
2 Rigid retaining spring for the secure folding of blades 4 Slim design for space-saving storage in the tool magazine
after the cleaning process
132
ZERO-POINT CLAMPING SYSTEM
Use recommendations
Acceleration Motion
Turn clockwise to clean the parts. By rotating the spindle the Move the rotating fan with a distance of 100 – 150 mm above the
wings will open. We recommend to accelerate in 2 stages: workpiece and apply a feed rate of 3 – 10 m/min. Then return to
1. Accelerate to 2.000 RPM the tool change position.
CONVENTIONAL WORKHOLDING
For smooth processes in automated, unmanned production The Clean•Tec Cleaning Fan is stored just like a common tool in
Clean•Tec is a must-have! It is ideal for cleaning workpieces, the tool magazine and selected automatically via a CNC program.
fixtures and the machine table prior to an automatic unloading. Thanks to its compact design (only Ø 68 mm) tool pockets neigh-
boring the Clean•Tec's storage place can be equipped with other
tools and don't have to be left empty.
CLEANING FAN
133
CLEANING FAN CLEAN•TEC CLEANING FAN
42 mm
C L EAN•T EC 1 6 0
Ø WITH
ITEM NO. RPM RANGE PRICE
OPEN WINGS
82 mm
30160 160 mm 6.000 – 12.000 RPM
m m
1 60
Ø
Ø 68 mm
Ø 20 mm
42 mm
C L EAN•T EC 26 0
Ø WITH
ITEM NO. RPM RANGE PRICE
OPEN WINGS
130 mm
0 mm
26
Ø
Ø 68 mm
Ø 20 mm
42 mm
C L EAN•T EC 330
Ø WITH
ITEM NO. RPM RANGE PRICE
OPEN WINGS
166 mm
m
0m
33
Ø
Ø 68 mm
134
ZERO-POINT CLAMPING SYSTEM
LANG Technik supports
Bild hilft e.V. “Ein Herz für Kinder”
CONVENTIONAL WORKHOLDING
kindergartens, soup kitchens, schools and families. The aid organization also
ensures life-saving surgeries and therapies for children who are seriously ill and
cannot be treated sufficiently in their home country. Additionally, Bild hilft e.V. With every Clean•Tec fan sold,
“Ein Herz für Kinder” provides immediate help in war and disaster zones. 2 Euros will be donated to the
BILD hilft e.V. “Ein Herz für
→→ Find out more about the aid organisation and its current projects:
Kinder” foundation.
www.ehfk.de.
Further organisation and associations which are regularly supported by LANG Technik are for example:
• Madeleine-Schickedanz-Kinderkrebs-Stiftung
• Zukunft für Kinder - Förderverein Kinder- u. Jugendheim Neuhausen e.V.
CLEANING FAN
135
Individual clamping solutions
Our department for custom-made products
To achieve high machine utilisation and thus offer you a very attractive return on investment, our production facilities in Holzmaden
utilise modern production methods and concepts enabling us to efficiently produce large lot sizes of our standardised products.
Another goal of ours is to tailor our proven products to your production requirements. For this reason, a separate department was
founded 2 years ago, located in Neuhausen, Germany, our former headquarters. It specifically handles individual clamping solutions
based around the LANG product range and offers customised, completed solutions for your application. From consultation, concept,
construction, up to production – together, with you we develop a custom-made solution. Below you will find just a sample of projects
that have been realised so far.
Product: Makro•Grip®
Product: Quick•Point®
What is special? 3-face Tombstone made of aluminium, total height 520 mm,
equipped with 6 × 45801 and 1 × 45751.
136
Product: Quick•Point®
137
Spare Parts for former vice versions
On this double page you find all spare parts for your existing vices (versions until September 2018)
M A K R O•GR I P ® AU TOMAT I ON VI C E
Available for further purchase for existing automation systems Eco-Compact 10, Eco-Compact 20, Eco-Tower 60.
AVA N T I
P R OF I LO
VA R I O• TEC
138
5-AX I S VI C E
139
Product Finder
ITEM NO. DESCRIPTION PAGE ITEM NO. DESCRIPTION PAGE
misc. Centring studs for alignment of Quick•Point® Plates 57 44255-TG125 Avanti Centre Base Jaw 125 + Spindle length 264 mm 115
20000 Spare Pins Ø 4 mm, for Vario•Tec 77 125 44258-46 Avanti Add-on Jaw 125, steel, height 46 mm 115
200009 O-Rings Ø 2 × 1,5 mm, for Spare Pins Ø 4 mm 125 44258-76 Avanti Add-on Jaw 125, steel, height 76 mm 115
200010 O-Rings Ø 3,5 × 2 mm, for Spare Pins Ø 6 mm 127 44259-46 Avanti Add-on Jaw 125, aluminium, height 46 mm 115
20001 Spare Pins Ø 6 mm, for Vario•Tec 125 127 44259-76 Avanti Add-on Jaw 125, aluminium, height 76 mm 115
20004 Air pressure pistol 125, 127 44296 Quick•Point® 96 Gauging Pallet 58
30160 Clean•Tec 160 134 44305-125 Avanti 125, jaw width 125, length 310 mm 114
30164 Clean•Tec 160 Spare Part Kit 134 44305-TG125 Avanti Centre Base Jaw 125 + Spindle length 314 mm 115
30260 Clean•Tec 260 134 44355-125 Avanti 125, jaw width 125, length 360 mm 114
30264 Clean•Tec 260 Spare Part Kit 134 44355-TG125 Avanti Centre Base Jaw 125 + Spindle length 364 mm 115
30330 Clean•Tec 330 134 44468-26 Avanti Add-on Jaw 46, steel, height 26 mm 111
30334 Clean•Tec 330 Spare Part Kit 134 44469-26 Avanti Add-on Jaw 46, aluminium, height 26 mm 111
41000-06/-34 Collets for ER 50, Ø 6 - 34 mm 107 44552 Quick•Point® Quick-Lock 52 54
41010 Centre Marking Tool 76 44596 Quick•Point® Quick-Lock 96 54
41010-01 Spare Marking Stud for Centre Marking Tool 76 44771-46 Avanti Base Jaws Avanti, jaw width 46 mm 90, 111
41020 Gauging Blocks for measuring wear of Stamping Jaws 76 44771-77 Avanti Base Jaws, jaw width 77 mm 90, 113
41052 Preci•Point Collet Chuck 107 44778-36 Avanti Add-on Jaw 77, steel, height 36 mm 113
41052-03 Preci•Point Clamping Wrench 107 44778-56 Avanti Add-on Jaw 77, steel, height 56 mm 113
41111 Standard Stamping Jaws 77 44779-36 Avanti Add-on Jaw 77, aluminium, height 36 mm 113
41111-01 Reconditioning, Standard Stamping Jaws 77 44779-56 Avanti Add-on Jaw 77, aluminium, height 56 mm 113
41112 High-End Stamping Jaws 77 45000-09 Bushing for alignment of Quick•Point® plates Ø 12 × 12 mm, for M 10 57
41112-01 Reconditioning, High-End Stamping Jaws 77 45000-30 Quick•Point® Cover Plug Remover 56
41140 Additional Stamping Vice for Dual Stamping 74 45002 Set keyways according to customer's request misc.
41140-HE Additional Stamping Vice for Dual Stamping, with High-End Stamping Jaws 74 45004 Set mounting bores according to customer's request misc.
41200 Stamping Unit, Standard, with Standard Stamping Jaws 72 45008-15 Quick•Point® Cover Discs, Ø 15 mm 56
41200-HE Stamping Unit, Standard, with High-End Stamping Jaws 72 45008-20 Quick•Point® Cover Discs, Ø 20 mm 56
41350 Stamping Unit, Extended, with Standard Stamping Jaws 72 45008-27 Quick•Point® Cover Discs, Ø 27 mm 56
41350-HE Stamping Unit, Extended, with High-End Stamping Jaws 72 45009 Set centre bore according to customer's request 26, 27
41400 Stamping Unit on Trolley, on T-Slot Plate 74 45022 Set keyways in Double Grid Plate 96 according to customer's request 30
41400-HE Stamping Unit on Trolley, on T-Slot Plate, with High-End Stamping Jaws 74 45024 Set mounting bores in Double Grid Plate 96 according to customer's request 30
41402 Trolley with Dual Stamping Unit, on T-Slote Plate 75 45042 Set keyways in 4-fold (& double, round) Grid Plate 96 according to customer's request 30, 32
41402-HE Trolley with Dual Stamping Unit, on T-Slote Plate, with High-End Stamping Jaws 75 45043-01 Custom corner radius for Quick•Point® (Multi-) Grid Plates, cut off 1 corner 61
41521 Stamping Unit on Trolley 73 45043-02 Custom corner radius for Quick•Point® (Multi-) Grid Plates, cut off 2 corners 61
41521-HE Stamping Unit on Trolley, with High-End Stamping Jaws 73 45043-04 Custom corner radius for Quick•Point® (Multi-) Grid Plates, cut off 4 corners 61
42018-77 Clamping Jaws Vario•Tec 77 90, 125 45044 Set mounting bores in 4-fold (& double, round) Grid Plate 96 according to customer's request 30, 32
42018-125 Clamping Jaws Vario•Tec 125 96, 127 45052-20 Quick•Point® 52 Cover Plugs, plastic 56
42057-77 Vario•Tec 77, length 130 mm 124 45052-30 Quick•Point ® 52 Cover Plugs, steel 56
42097-77 Vario•Tec 77, length 170 mm 124 45096-20 Quick•Point ® 96 Cover Plugs, plastic 56
42102-125 Vario•Tec 125, length 210 mm 126 45096-30 Quick•Point ® 96 Cover Plugs, steel 56
42137-77 Vario•Tec 77, length 210 mm 124 45150 Quick•Point ® 52 Plate with Clamping Edge, 150 × 116 × 27 mm 20
42152-125 Vario•Tec 125, length 260 mm 126 45151 Quick•Point® 52 Plate, 150 × 116 × 27 mm, w/o bores 20
42202-125 Vario•Tec 125, length 310 mm 126 45156 Quick•Point® 52, 5-Axis Riser, 150 × 116 × 60 mm 36
42252-125 Vario•Tec 125, length 360 mm 126 45157 Quick•Point ® 52, 5-Axis Riser, 150 × 116 × 100 mm 36
43060 Quick•Point® 52, Riser, 150 × 116 × 60 mm 38 45160 Quick•Point ® Adaptor Plate, 150 × 126 × 27 mm 34
43100 Quick•Point ® 52, Riser, 150 × 116 × 100 mm 38 452014 Slot key, loose (DIN 6323) for alignment of Quick•Point® Plates, 20 to 14 mm 57
43400 Quick•Point ® 96, 3-Face Pyramid 40 452018 Slot key, loose (DIN 6323) for alignment of Quick•Point® Plates, 20 to 18 mm 57
44006 Quick•Point ® 96, Riser, round, Ø 246 × 60 mm 39 452214 Slot key for alignment of Quick•Point® Plates, 14 × 22 mm 57
44010 Quick•Point® 96, Riser, round, Ø 246 × 100 mm 39 452218 Slot key for alignment of Quick•Point® Plates, 18 × 22 mm 57
44060 Quick•Point ® 96, Riser, 192 × 156 × 60 mm 38 45252 Quick•Point® Quick-Lock 52 for Double Grid Plate 52 54
44085-46 Avanti 77, jaw width 46, length 102 mm 110 45270 Quick•Point® 52 Clamping Studs, Ø 16 mm 50
44100 Quick•Point® 96, Riser, 192 × 156 × 100 mm 38 45270-10 Quick•Point® 52 Spacer Studs, Ø 16 mm 53
44120-46 Avanti 77, jaw width 46, length 130 mm 110 45275 Quick•Point ® 52 Support Plate, 96 × 96 × 27 mm 52
44120-77 Avanti 77, jaw width 77, length 130 mm 112 45277 Quick•Point® 52 Support Plate, 156 × 156 × 27 mm 52
44120-TG46 Avanti Centre Base Jaw 46 + Spindle length 135 mm 111 45296 Quick•Point® Quick-Lock 96 for Double Grid Plate 96 54
44152 Quick•Point® 52 Alignment Gauge 59 45400 Quick•Point® 96 Plate with Clamping Edge, 192 × 156 × 27 mm 21
44152-10 Quick•Point® 52 Alignment Gauge, for rent 59 45401 Quick•Point® 96 Plate, 192 × 156 × 27 mm, w/o bores 21
44160-77 Avanti 77, jaw width 77, length 170 mm 112 45406 Quick•Point® 96, 5-Axis Riser, 192 × 156 × 60 mm 37
44196 Quick•Point® 96 Alignment Gauge 59 45407 Quick•Point® 96, 5-Axis Riser, 192 × 156 × 100 mm 37
44196-10 Quick•Point® 96 Alignment Gauge, for rent 59 45452 Quick•Point® Quick-Lock 52 for 4-fold Grid Plate 52 54
44200-77 Avanti 77, jaw width 77, length 210 mm 112 45496 Quick•Point® Quick-Lock 96 for 4-fold Grid Plate 96 54
44200-TG77 Avanti Centre Base Jaw 77 + Spindle length 215 mm 113 45500 Wrench for Makro•Grip® 77, size 12 91
44205-125 Avanti 125, jaw width 125, length 210 mm 114 45501 Wrench for Makro•Grip® 125, size 15 97
44251-125 Avanti Base Jaws, jaw width 125 mm 96, 115 45505 Wrench for Makro•Grip ® 77 / 125, size 5 91, 97
44252 Quick•Point® 52 Gauging Pallet 58 45508 Hexagon socket, 3/8", size 12 91
44255-125 Avanti 125, jaw width 125, length 260 mm 114 45509 Hexagon socket, 3/8", size 15 97
140
Icon Description
45570 Quick•Point® 96 Clamping Studs, Ø 20 mm 50 48155-77 Makro•Grip® 5-Axis Vice 125, jaw width 77, length 160 mm 92
To simplify specifications we use these icons to highlight technical
45570-10 Quick•Point 96 Spacer Studs, Ø 20 mm
®
53 48155-125 Makro•Grip 5-Axis Vice 125, jaw width 125, length 160 mm
®
94 information and the compatibility of the products:
45575 Quick•Point ® 96 Support Plate, 156 × 156 × 27 mm 52 48155-TG2527 Centre Jaw 125 (27 mm) + Spindle length 164 mm 101
45577 Quick•Point® 96 Support Plate, 192 × 192 × 27 mm 52 48160-77 Makro•Grip® 5-Axis Vice 77, jaw width 77, length 170 mm 88
45600 Quick•Point® 52 Grid Plate, 104 × 104 × 27 mm, w/o bores 16 48160-TG7717 Centre Jaw 77 (17 mm) + Spindle length 175 mm 100 Grid system:
45621 Quick•Point® 52, Double Grid Plate, 208 × 104 × 27 mm 28, 43 48160-TG7727 Centre Jaw 77 (27 mm) + Spindle length 175 mm 100 Zero-point pitch
45640 Quick•Point® 52, 4-fold Grid Plate, 208 × 208 × 27 mm, w/o bores 29 48200-77 Makro•Grip® 5-Axis Vice 77, jaw width 77, length 200 mm 88
45641 Quick•Point® 52, 4-fold Grid Plate, 208 × 208 × 27 mm, with bores for 63 mm distance 29 48200-TG7717 Centre Jaw 77 (17 mm) + Spindle length 215 mm 100
45642 Set keyways in 4-fold Grid Plate 52 according to customer's request 29 48200-TG7727 Centre Jaw 77 (27 mm) + Spindle length 215 mm 100 Clamping stud size:
45644 Set mounting bores in 4-fold Grid Plate 52 according to customer's request 29 48205-77 Makro•Grip® 5-Axis Vice 125, jaw width 77, length 210 mm 92 Diameter of the clamping studs
45710 Quick•Point® 96 Grid Plate, 192 × 192 × 27 mm, w/o bores 17 48205-125 Makro•Grip ® 5-Axis Vice 125, jaw width 125, length 210 mm 94
45715 Quick•Point ® 96 Extended Grid Plate, 246 × 192 × 27 mm, with bores for 100 mm distance 19 48205-TG2527 Centre Jaw 125 (27 mm) + Spindle length 214 mm 101
45716 Quick•Point® 96 Extended Grid Plate, 246 × 192 × 27 mm, w/o bores 19 48255-125 Makro•Grip® 5-Axis Vice 125, jaw width 125, length 260 mm 94 Quick-Lock:
45720 Quick•Point® 96, Double Grid Plate, 384 × 192 × 27 mm 30 48255-TG2527 Centre Jaw 125 (27 mm) + Spindle length 264 mm 101 The fast actuation system can be attached
45740 Quick•Point® 96, 4-fold Grid Plate, 384 × 384 × 27 mm, w/o bores 32 48305-125 Makro•Grip® 5-Axis Vice 125, jaw width 125, length 310 mm 94
45741 Quick•Point® 96, 4-fold Grid Plate, 384 × 384 × 27 mm, with bores for 63 mm distance 33 48305-TG2527 Centre Jaw 125 (27 mm) + Spindle length 314 mm 101
45742 Quick•Point ® 96, 4-fold Grid Plate, 384 × 384 × 27 mm, with bores for 100 mm distance 33 48355-125 Makro•Grip® 5-Axis Vice 125, jaw width 125, length 360 mm 94 Vice size:
45750 Quick•Point® 52 Round Plate, Ø 116 × 27 mm 22 48355-TG2527 Centre Jaw 125 (27 mm) + Spindle length 364 mm 101 Width of vice
45751 Quick•Point ® 52 Round Plate, Ø 116 × 27 mm, w/o bores 22 4825164 Set Spindle (length 164 mm) + Centre Piece 125 97
45763 Quick•Point ® 96 Grid Plate, 192 × 192 × 27 mm, with bores for 63 mm distance 18 4825214 Set Spindle (length 214 mm) + Centre Piece 125 97
45800 Quick•Point® 96 Round Plate, Ø 176 × 27 mm 24 4825264 Set Spindle (length 264 mm) + Centre Piece 125 97 Torque:
45801 Quick•Point® 96 Round Plate, Ø 176 × 27 mm, w/o bores 24 4825314 Set Spindle (length 314 mm) + Centre Piece 125 97
Maximum allowed torque
45803 Quick•Point® 96 Round Plate, Ø 176 × 27 mm, for individual centre bore 27 4825364 Set Spindle (length 364 mm) + Centre Piece 125 97
45820 Quick•Point® 96 Round Plate, Ø 196 × 27 mm, w/o bores 25 4877100 Set Spindle (length 100 mm) + Centre Piece 77 91
45823 Quick•Point® 96 Round Plate, Ø 196 × 27 mm, for individual centre bore 27 4877135 Set Spindle (length 135 mm) + Centre Piece 77 91
Clamping force:
45840 Quick•Point® 96 Round Plate, Ø 246 × 27 mm, w/o bores 25 4877175 Set Spindle (length 175 mm) + Centre Piece 77 91
Clamping force at maximum torque
45843 Quick•Point ® 96 Round Plate, Ø 246 × 27 mm, for individual centre bore 27 4877215 Set Spindle (length 215 mm) + Centre Piece 77 91
45863 Quick•Point® 96 Round Plate, Ø 246 × 27 mm, with bores for 63 mm distance 18 49010-77 Profilo 77, length 102 mm 118
45890 Quick•Point® 96 Round Plate, Ø 246 × 27 mm, with bores for 63 mm distance 25 49040-77 Profilo 77, length 130 mm 118
Centring accuracy:
45900 Quick•Point® 52 Round Plate, Ø 157 × 27 mm 23 49050-125 Profilo 125, length 160 mm 120
Centring tolerance of vices
45901 Quick•Point 52 Round Plate, Ø 157 × 27 mm, w/o bores
®
23 49077 Base Jaws Profilo 77 90, 119
45903 Quick•Point ® 52 Round Plate, Ø 157 × 27 mm, for individual centre bore 26 49080-77 Profilo 77, length 170 mm 118
45910 Quick•Point® Adaptor Plate, round, Ø 157 × 27 mm 35 49080-TG77 Profilo Centre Base Jaw 77 + Spindle length 175 mm 119
Mounting bores:
45962 Quick•Point® 96, Double Grid Plate, round, Ø 384 × 27 mm, w/o bores 30 49100-125 Profilo 125, length 210 mm 120
Individual mounting bores and keyways are possible
45963 Quick•Point® 96, Double Grid Plate, round, Ø 384 × 27 mm, with bores for 63 mm distance 31 49100-TG125 Profilo Centre Base Jaw 125 + Spindle length 214 mm 121
45964 Quick•Point 96, Double Grid Plate, round, Ø 384 × 27 mm, with bores for 100 mm distance
®
31 49120-77 Profilo 77, length 210 mm 118
45996 Quick•Point® Quick-Lock 96 for Double Grid Plate 96, round 54 49120-TG77 Profilo Centre Base Jaw 77 + Spindle length 215 mm 119
46081 Quick•Point® Handle Bar, aluminium 56 49125 Base Jaws Profilo 125 96, 121
Automatable:
47005 Cordless Drill Attachment, Internal Hexagon size 5 91, 97 49150-125 Profilo 125, length 260 mm 120
Automation interface included
47220 Quick•Point® 52, Twin Base, 146 × 76 × 168 mm 41 49150-TG125 Profilo Centre Base Jaw 125 + Spindle length 264 mm 121
47520 Quick•Point® 96, Twin Base, 192 × 116 × 247 mm 41 49200-125 Profilo 125, length 310 mm 120
48077-4620 Spare Jaws for Makro•Grip® 5-Axis Vice 77, jaw width 46 90 49200-TG125 Profilo Centre Base Jaw 125 + Spindle length 314 mm 121
48077-4622 Spare Jaws w/o holding teeth, for Makro•Grip® 77, jaw width 46 90 49250-125 Profilo 125, length 360 mm 120
48077-7720 Spare Jaws for Makro•Grip® 5-Axis Vice 77, jaw width 77 90 49250-TG125 Profilo Centre Base Jaw 125 + Spindle length 364 mm 121
48077-7722 Spare Jaws w/o holding teeth, for Makro•Grip® 77, jaw width 77 90 49258 Profilo 125 Add-on Jaw, steel 121
48085-46 Makro•Grip® 5-Axis Vice 77, jaw width 46, length 102 mm 86 49259 Profilo 125 Add-on Jaw, aluminium 121
48085-4620 Spare Jaws for Makro•Grip® 5-Axis Vice 77, jaw width 46 (48085-46) 90 49778 Profilo 77 Add-on Jaws, steel 119 The following icons symbolise that on the respective catalogue
48085-4622 Spare Jaws w/o holding teeth, for Makro•Grip® 77, jaw width 46 (48085-46) 90 49779 Profilo 77 Add-on Jaws, aluminium 119
page, interactive content can be called up with the LANG App:
48085-77 Makro•Grip® 5-Axis Vice 77, jaw width 77, length 102 mm 88 65191-04 Bushing for alignment of Quick•Point® plates Ø 12 × 12 mm, for M 8 57
48085-7720 Spare Jaws for Makro•Grip 5-Axis Vice 77, jaw width 77 (48085-77)
®
90 65191-05 Bushing for alignment of Quick•Point plates, Ø 16 × 15 mm, for M 10
®
57
48085-7722 Spare Jaws w/o holding teeth, for Makro•Grip® 77, jaw width 77 (48085-46) 90 70005 Quick•Tower Universal Base Plate, 396 × 396 × 27 mm, w/o bores 47
48085-TG4617 Centre Jaw 46 (17 mm) + Spindle length 100 mm 100 70006 Set mounting bores in Quick•Tower Base Plate 47
48085-TG4627 Centre Jaw 46 (27 mm) + Spindle length 100 mm 100 70008 Quick•Tower universal Base Plate, 446 × 446 × 27 mm, with bores 47
Video
48085-TG7717 Centre Jaw 77 (17 mm) + Spindle length 100 mm 100 70263 Quick•Point 52, 3-Face Tombstone
®
42
48085-TG7727 Centre Jaw 77 (27 mm) + Spindle length 100 mm 100 70264 Quick•Point® 52, 4-Face Tombstone 43
48120-46 Makro•Grip® 5-Axis Vice 77, jaw width 46, length 130 mm 86 70650 Quick•Tower Base, height 668 mm 46
48120-77 Makro•Grip ® 5-Axis Vice 77, jaw width 77, length 130 mm 88 70850 Quick•Tower Base, height 860 mm 46
48120-TG4617 Centre Jaw 46 (17 mm) + Spindle length 135 mm 100 75600 Quick•Tower® 52 Grid Plate, 104 × 104 × 27 mm, with bores for Quick•Tower 16, 42, 48 Slideshow
48120-TG4627 Centre Jaw 46 (27 mm) + Spindle length 135 mm 100 75710 Quick•Point® 96 Grid Plate, 192 × 192 × 27 mm, with bores for Quick•Tower 17, 49
48125-2520 Spare Jaws for Makro•Grip® 5-Axis Vice 125, jaw width 125 96
48125-2522 Spare Jaws w/o holding teeth, for Makro•Grip® 125, jaw width 125 96
48125-7720 Spare Jaws for Makro•Grip ® 5-Axis Vice 125, jaw width 77
Interactive Model
96
48125-7722 Spare Jaws w/o holding teeth, for Makro•Grip® 125, jaw width 77 96
Imprint
Titel:
LANG Catalogue 2019/2020 (Issue No. 8)
Date of Printing 8/2018
Editor:
LANG Technik GmbH
Albstraße 1-4
D-73271 Holzmaden
Tel.: +49 7023 9585-0
Fax: +49 7023 9585-100
Internet: www.lang-technik.de
simple.
E-Mail: info@lang-technik.de
E-Mail Sales: sales@lang-technik.de
gripping.
Legal provisions:
Copyright 2018
LANG Technik GmbH
future
All rights reserved. Reprint, recording in online-services, internet
and duplication on data carrier as CD ROM, DVD, etc., or in extracts
are prohibited. Misprints, errors and changes are subject to
modifications. All indications of weight are approximate values.
Illustrations can vary from articles.
→ facebook.com/langtechnik → twitter.com/langtechnik
→ instagram.com/langtechnik → youtube.com/user/LangTechnik