Professional Documents
Culture Documents
76-71-006 Avkcms en
76-71-006 Avkcms en
76-71-006 Avkcms en
Lug type, EPDM liner, EP-coated ductile iron disc, 1.4021 shaft, DN350-400
The AVK Series 76 is a wide range of concentric butterfly valves available in both wafer and lug design and with AVK's own
high quality rubber liner that significantly increases the service life. The one-piece replaceable liner also serves as a profiled
flange gasket and comes in either drinking water approved EPDM or hydrocarbon resistant NBR. Disc material is stainless
steel or epoxy coated ductile iron. The shaft is stainless steel installed in low friction PTFE bearings in anti-blow out design
plus unique disc sealing profile results in low torque and long life.
Product description:
Concentric butterfly valve with loose liner for drinking water and waste water max. 70° C
Standards:
· Designed according to EN 593
· Face-to-face dimension according to EN 558 Table 2 Basic Series 20
· Standard flange drilling to EN1092-2 (ISO 7005-2), PN 16
Test/Approvals:
· Hydraulic test according to EN 1074-1 and 2 / EN 12266
· Seat: 1.1 x PN. Body: 1.5 x PN.
Features:
· Replaceable liner for increased life time
· Liner made of AVK's own high quality, high life time EPDM rubber, drinking water approved by WRAS
· Drinking water approved epoxy coating
· Anti-blow out shaft design in stainless steel
· Streamlined disc in ductile iron with epoxy coating for low head loss
· Hexagonal shaft/disc connection transmits torque for smooth operation under severe operating conditions
· PTFE coated low friction bearings give low operational torque and allows for an economical choice of actuator
· Standard ISO 5211 flange for actuator
Accessories:
Gearbox and handwheel, pneumatic actuator, electric actuator
The designs, materials and specifications shown are subject to change without notice due to the continuous development of our product range.
Component list:
1 8
5. Shaft, drive Stainless steel 1.4021 12. Plug Steel, zinc plated
6 13
6. Body Ductile iron GJS-500-7 (GGG-50) 13. Countersunk screw Stainless steel A2-70
7 14
Components may be substituted with equivalent or higher class materials without prior notification.
The designs, materials and specifications shown are subject to change without notice due to the continuous development of our product range.