Professional Documents
Culture Documents
Final Report 1090921
Final Report 1090921
Final Report 1090921
Design competition
Use straws to make the support between the backboard and the basketball post. We
designed three straws to achieve force balance, and use one straw to support the weight
between the backboard and the support.
2. Initial Design
Initially, our design is mainly triangular to support, and the teacher's original work of
the quadrilateral is not the same, in addition we hope that the bottom can support better so
add more poles below to do support.
Initial Design
1 http://www.GTechSeda.com.tw/
【頁首】Final Report. Design competition
We used Solidwork to do the drawing and analysis, and we measured the maximum
stress and maximum displacement of our initial design, but the actual weight of our initial
design was very different from the predicted value.
maximum stress:41.83MPa
maximum displacement:4.981m
2 http://www.GTechSeda.com.tw/
【頁首】Final Report. Design competition
In project 4, the teacher taught us how to optimize our basketball frame design, and we
also learned how to strengthen our basketball frame in this homework.
Finally, we redesigned our basketball hoop because after the last experience, we
strengthened the front half of our basketball hoop and thought it would be more solid
and also resist more torque.
3 http://www.GTechSeda.com.tw/
【頁首】Final Report. Design competition
New Design
We also used Solidwork for drawing and analysis, and tested unilateral and bilateral
stress analysis, and for measuring torque, we also tested unilateral frequency analysis.
The maximum stress of the hook on one side of the new bracket:73.52MPa
The maximum displacement of the hook on one side of the new bracket:1.454m
4 http://www.GTechSeda.com.tw/
【頁首】Final Report. Design competition
The maximum stress of the hook on double side of the new bracket:32.67MPa
5 http://www.GTechSeda.com.tw/
【頁首】Final Report. Design competition
In this actual test we successfully withstood 3.5 kg, 7 weights, which is a great
progress for our design, compared with the previous 1 kg, we have improved a lot, so
we feel quite accomplished about this design.
6 http://www.GTechSeda.com.tw/
【頁首】Final Report. Design competition
6. Exergame design
After hitting, mpu6050 accelerometer will pick up the swing action, then pass the
action to nrf52832 and then to the game application display.
7 http://www.GTechSeda.com.tw/
【頁首】Final Report. Design competition
Our schematic
Our action classification is divided into a total of three actions, including poking,
slashing, and hacking. These three moves are classified by procedure, with poking
scoring the highest and slashing scoring the lowest.
We collected 40 pieces of data by using each action of the program, and then we
could put them into Weka for training, and finally we dropped the data back into
arduino.
Poke the data of this action, and the setting is (1,0,0), we have a total of 40 data.
8 http://www.GTechSeda.com.tw/
【頁首】Final Report. Design competition
Split the data of this action, and the setting is (0,1,0), we have a total of 40 data.
Cut the data of this action, and the setting is (0,0,1), we have a total of 40 data.
The data for MLP training has 15 input ports, 9 hidden ports, and 3 output ports.
9 http://www.GTechSeda.com.tw/
【頁首】Final Report. Design competition
Poking is 0
Hacking is 1
10 http://www.GTechSeda.com.tw/
【頁首】Final Report. Design competition
Chopping is 2
11 http://www.GTechSeda.com.tw/
【頁首】Final Report. Design competition
my photo
The biggest difference between this semester's mechanical design course and the last
semester is that there are two different projects in this semester, one is the integration
of Exergame and sports, and the other is the design of basketball frame structure.
12 http://www.GTechSeda.com.tw/