‘sM00856
Page 4-7 of 30 za
Revision D
u TDS Mode ~ There are three illuminated buttons in this console area,
= Drill mode — When pushed, the green indicator illuminates to show that the top
drive Is in DRILL mode. This mode is used for normal driling operations. When
in this mode, the driller uses the DRILL and TDS RPM incremental encoder
knobs to set dling operation limits.
= Spin mode — When pushed, the green indicator illuminates to show that the top
drive is in SPIN mode, This mode is used for shouldering up pipe while making
up connections. When in this mode, the RPM and torque settings are fixed at
standard SPIN mode rotational speed and torque values.
= Torque mode ~ When pushed and held, the green indicator illuminates to show
that the top drive is in TORQUE mode. This mode is used for making up and
breaking out connections. When this mode is selected in the FORWARD
direction, RPM is fixed and torque gradually ramps up to the makeup torque
setpoint. When this mode is selected in the REVERSE direction, RPM is fixed
and torque gradually ramps up to the maximum torque of the top drive, or until
the connection is broken, whichever happens first
a TDS Direction ~ There are three buttons in this console area.
= Forward - When pushed, the rotational direction of the top drive is set to
forward (clockwise), the lubrication pump starts, and rotation ramps up to the
RPM setpoint. The green indicator illuminates when the top drive is assigned to
rotate clockwise (forward),
= Off When pushed, the top drive is de-assigned and rotation will stop.
= Reverse ~ When pushed, the rotational direction of the top drive is set to
reverse (counterclockwise), the lubrication pump starts, and rotation ramps up
to the RPM setpoint. The green indicator illuminates when the top drive is
assigned to rotate counter-clockwise (reverse).
4-7
ee SV exrmowcumnsvencs