sMoosse
| 4 | Operation fasion
age 4a 20
IBOP and Brake
Figure 4-5. IBOP and Brake Controls
a IBOP ~The IBOP area has a yellow indicator and a switch. The yellow indicator is
illuminated when the IBOP is closed. Turning the switch will open or close the IBOP.
Brake ~ There are two controls in this console area:
= Auto - When pressed, the green indicator on this button illuminates to show
that the motor brakes are in AUTO mods. In this mode, the brakes are
automatically released when a speed command is sent to the VED (in FWD or
REV mode). The brakes are automatically set when the speed command is
removed (OFF mode).
= On/ Off ~ The red indicator on this button lights whenever the motor brakes
have been applied and are engaged (ON). This indicator lights any time the
brake is set, regardless of whether or not the button has been pressed. When
this button is pressed once, the brakes are set and the light comes on. When
pressed again, the light goes out to show the brakes have been released,
@Y watiowat. onweLt vaRCO worwnov.com