Professional Documents
Culture Documents
2022 2023 Wag Aero Catalog
2022 2023 Wag Aero Catalog
2022 2023 Wag Aero Catalog
E-476-200 E-481-000
Gas Caps
I-907-300 I-982-001
Description Cat. No. Price
G-781-000 Ram Air Pressure Caps Tube through cap allows forced air
into tank which forces fuel out. Used on our Sport Trainer &
2+2 wing tanks. Ideal for homebuilts. Code 8
E-481-000 $52.00
G-620-000
Used with many wing tank kits. Code 8
E-476-200 $46.85
n Fuel Testers, Filters All Code 7 Engine Mount Bushings, FAA/PMA’d More Gas Caps on Page 38
Cat. No. Price Replace your engine mount rubber bushings and restore that
GATS Jar Fuel Tester vibration-free flight. For conical mounts only. Code 4
Used to collect preflight Description Cat. No. Price
inspection fuel samples. It Continental Bushings For A-65, C-85 and C-90 Engines.
separates any co-mingled
fuel and water, by allowing Replaces P/N 22387 I-907-300 ea. $5.95
G-781-000 $17.85
only the fuel to be poured 8 OR MORE ea. $5.53 H-805-000
Whelen
Wh l L Landing
di & T
Taxi Light Replacements by Whelen
PAR36 - Plus Series LED® 40% BRIGHTER! FAA/PMA approved, these lights are a drop-in
replacement for outdated halogen or HID lamps. Lightweight, low-current and moisture
resistant, they provide stable light output for thousands of operating hours. Three year
warranty. Made in USA. 14V = 1.36 amps @ 14VDC. 28V = .68 amps @ 28VDC 4.38” round x
1.75” face to screw terminal. Code 4
Description Model No. P/N Cat. No. Price
B-251-000
14V Landing Light P36P1L 01-0771833-10 B-251-000 $270.00
14V Taxi Light P36P1T 01-0771833-15 B-253-000 $270.00
28V Landing Light P36P2L 01-0771833-20 B-251-028 $245.00
PAR46 - Plus Series LED® 40% BRIGHTER! Skull Cap Small Spinner Kit
Same as above, except replacement lamp for PAR-46 halogen or HID lamps. 14V = 2.6 amps @ Fits Sensenich 74CK-0, 74CK-2, 76AM6-2, 76CK, 72CK, 76AK-2,
14VDC. 28V = 1.3 amps @ 28 VDC. 5.65” round x 2.25” face to screw terminal. Code 4 74FDT, 74FK; McCauley CM74, CM73, CM71, CM70, LM72.
14V Landing Light P46P1L 01-0790750-10 B-252-000 $295.00 5” Dia. Code 4
28V Landing Light P46P2L 01-0790750-20 B-252-028 $295.00 Cat. No. Price
B-252-000 Lighting & Strobes on Pages 24-28 I-807-000 $62.00
Prices and Supplies are subject to change without notice | 1.800.558.6868 | onlinecatalog.wagaero.com | 3
FUEL GAUGES
22082
2-1/4” Fuel Pressure 0-9 PSI Gauge Electronic 12VDC. Uses high grade 1/8-27 NPT sender to
M-311-000
keep fuel out of the cockpit. Features a programmable high and low alert (LED) as well as back
lit for low light conditions. Peak high and low recall. Microprocessor controlled stepper motor Wing Tank Sight Gauge Float Assembly FAA/PMA’d For PA-12, -14,
precisely controls needle through the full 270 degrees of movement. Composite plastic case -20. Usable on other models with Form 337 Field Approval. Copy of
with black anodized aluminum bezel. 12 ft. sensor cable included. Made in the USA. M-311-000 $99.00
original unit. Ideal for homebuilts needing sight type gauge. Uses
8 A-271-000 $214.25 Cat. No. E-400-000 weldable fitting, 3/8” pipe thread. Code 4
Replacement Glass Tube For above sight gauge, but will not fit
M-311-100 $7.95
original unit. Code 4
Gas Sight Gauge For PA-18 Style aircraft. Constructed of 6061
A-242-000
aluminum, gold anodized. Used on Wag-Aero’s 11.5 gallon gas tank M-937-000 $83.10
(Cat. No E-424-100). Code 8
SUCTION GAUGES
A-198-000 A-034-000 A-209-000
A-004-000 A-034-200
INSTRUMENTS TACHOMETERS
3-1/8” Mechanical Tachometers by Mitchell FAA Approved. These tachs offer exceptional accuracy and reliability. Range 500-3500 RPM. Additional charge for custom range markings will apply
and must be done by the manufacturer according to two-year manufacturer’s warranty. All Code 4
P/N Rotation RT Avg. Cruise RPM Aircraft Application Cat. No. Price
Aeronca 15AC Sedan, Beech 35C-F, Bellanca Champions, Cessnas: 120, 140, 170, 180,182, 185 (w/IO-470 eng.),
D1-112-5023 Clockwise RT-7 2300 A-030-100 $250.00
188, 336, 337, Pipers: PA12, 16, 18, 20, 22, 23, 24, 25, 28, 30, 32, 39, Taylorcraft: 19, 15A, 20, 20AG, Zephyr.
Counter
D1-112-5030 RT-9 2300 Aeronca Champion, Early Model Chiefs, Piper PA15&18w/rem engine. A-030-300 $290.55
Clockwise
Counter
D1-112-5124 RT-10 2050 Aeronca Champion, Late Model Chiefs, Champion 7AC, 11AC, 7CCM A-030-910 $268.75
Clockwise
D1-112-5025 Clockwise RT-11 2500 Beech Musketeers & Debonairs, Cessnas: 150, 152, 172, 177, 185, 188 (w/IO-520 eng.), 206, 207, 210, 310, 320 A-030-200 $250.00
n Cub Face Tachometers by Mitchell FAA Approved
D1-112-5023 Clockwise RT-7 2300 These tachs offer exceptional accuracy and reliability. Range 500-3500 RPM. A removable bezel allows range A-030-101 $304.85
Counter markings to be placed directly on the face of the instrument. Units have a red needle instead of a black needle
D1-112-5030 RT-9 2300 like the original. Two year Manufacturer’s warranty. Code 4 A-030-301 $323.20
Clockwise
n Electric Tachometers by Westberg
2AT3-2 0-3500 For 4 cylinder engines. These 2-1/4” tachs connect to primary lead of magnetos. A-088-000 $163.75
2AT5-2 0-5000 No sender is required. Use with Slick or Bendix magnetos. Code 8 A-089-000 $163.75
Tachometer Fuse Adapter P/N 381. Required for installation of Westberg tachs. A-090-000 $15.50
Visit us at wagaero.com
Kit comes with the connector
8 A-025-000 $642.65
and cable clamp.
A-049-000 A-054-000
A-247-000
A-002-000 A-002-001 A-002-100
Description P/N Code Cat. No. Price Description P/N Code Cat. No. Price
Single-Probe EGT Kits Imported Unlighted Kits includes single gauge 700-1700˚, 48” long Dual EGT Imported
clamp-on exhaust probe. Ideal for most light aircraft. 2” EGT Gauge Only Non-TSO’d Imported
8 A-246-000 $52.75
2-1/4” Non-TSO’d EGT Gauge and Probe Kit 8 A-087-000 $113.00 700˚ - 1700˚F/700˚ - 1700˚F
2-1/4” Non-TSO’d EGT Gauge Only 8 A-087-100 $92.75 2-1/4” Square Dual EGT Gauge Only Imported
8 A-247-000 $59.50
700-1700°F/ 700-1700°F
3-1/8” Non-TSO’d EGT Gauge Only, 700˚ - 1700˚F 8 A-239-000 $44.95
2-1/4” Single Engine Type K EGT by Alcor. Quality deluxe gauge with heavy-duty lead and
Dual EGTs by Westberg. Monitors two engines simultaneously. Includes gauge, two each of 4’
probe. Homebuilders – easy to install with no electrical system required. Single engine model.
lead/probe, 7’ total patch cable, hardware and instructions.
Complete Unit 4 A-002-000 $389.00
2-1/4” Non-TSO’d EGT Gauge Kit 8 A-237-000 $272.00
Alcor Probe 86255 4 A-002-001 $99.50
2-1/4” Non-TSO’d EGT Gauge Only 8 A-237-100 $168.00
Alcor Lead, 90” 42525 4 A-002-100 $41.75
3-1/8” Non-TSO’d EGT Gauge Kit 8 A-105-000 $276.00
3-1/8” Non-TSO’d EGT Gauge Only 8 A-105-100 $192.00
REPLACEMENT PROBES
PATCH CABLES by Westberg 48” long clamp-on exhaust probe. Direct replacement for EGTs and
engine analyzers shown, except the Alcor units.
Description Code Cat. No. Price
For EGTs & CHTs with Cat. Nos. A-087-000, A-092-014,
A-092-018 & A-152-004, A-152-008. These Cat. No. A-112 Non-TSO’d 48” Lead Imported,
8 A-087-001 ea. $33.50
Series cables are for Non TSO’d gauges only. 1” probe
6’ Cable 206-SS-SS 8 A-112-106 $18.20
A-087-001
Non-TSO’d 48” Lead
A-112-106 A-087-003 712-2-DWK 8 A-087-003 ea. $58.00
by Westberg
7’ Cable 207-SS-SS 8 A-112-107 $19.95
12’ Cable 212-SS-SS 8 A-112-112 $19.20 REPLACEMENT LEADS AND
THERMOCOUPLES
A-112-107
A-112-112 A-136-000
A-092-118 A-092-114
A-092-318 A-092-314
A-220-000
Direct replacement for CHTs shown above, except the Alcor units. Length 48” Leads
Non-TSO’d Leads Imported
18mm lead 8 A-092-118 ea. $21.00
COMBINATION CHT, EGT 14mm lead 8 A-092-114 ea. $15.50
Save panel space while getting necessary information for that all Non-TSO’d Leads by Westberg
important fuel conservation. Cylinder head temperature gauges 18mm lead 712-5WK 8 A-092-318 ea. $38.25
range 100-700˚F and exhaust temperature gauges range 700-1700˚F. 14mm lead 712-4WK 8 A-092-314 ea. $38.25
Includes gauge, EGT probe and lead, CHT lead and thermocouple.
Bayonet Thermocouple by Westberg Thermocouple for both single and combination cylinder
Description Code Cat. No. Price
head temperature gauges where bayonet type end is desired. 48 inches in length.
2-1/4” Unlighted Gauges, Non-TSO’d Imported 712-7DK 8 A-220-000 $83.50
CHT/EGT 18mm Kit 8 A-152-008 $104.95 CHT Probe only w/13” lead by Universal Non-TSO’d 5 A-136-000 $59.40
A-152-004
A-152-008
A-152-100
CHT/EGT 14mm Kit 8 A-152-004 $104.95 Note: Most engines require 18mm thermocouple; Franklin and Volkswagen engines, however,
CHT/EGT Gauge only 8 A-152-100 $88.45 require 14mm.
Prices and Supplies are subject to change without notice | 1.800.558.6868 | onlinecatalog.wagaero.com | 9
A-046-000 / A-046-100
A-047-000 / A-047-100
A-050-000
A-044-000 A-041-000
A-098-100 A-098-200
MS33737-11C 487-15 .125 5 L-699-360 $1.65 Quality Repair of Newer Style Oil Temp/Oil PSI
Gauge This is the same as above, but for newer
MS33737-12C 487-16 .187 5 L-699-361 $1.56 style gauges.
MS33737-13C 487-17 .250 5 L-699-362 $1.66 8 A-020-100 $324.00
MS33737-14C 487-18 .313 5 L-699-363 $2.05 A-020-100
PITOT FLAGS
G-659-000
G-659-600
G-659-400
G-659-700
16” Vinyl Flag w/ring, universal applications. RBF Universal G-659-700 $8.00
18-3/4” Vinyl Flag w/ring, universal applications, Ideal for homebuilts. 1/4” G-659-902 $17.00
18-3/4” Vinyl Flag w/ring, universal applications. Ideal for homebuilts. 3/16” G-659-903 $16.50
G-659-100
Vinyl Flag with Hard Plastic Boot Fits most single engine
Pipers, some Rockwell and late Grummans with the blade type 4602 1-1/2” G-659-200 $11.00
pitot tubes.
Fabric Flag with Velcro Fits all Piper Singles, Piper Seminoles,
Senecas, Rockwell Commander Singles and late Grumman P-100 2” G-659-100 $7.50 G-659-901
Singles. “Fly off” stub pitot tube cover.
3-in-1 Pitot Cover 16” Vinyl Flag Multi-purpose openings.
3/8”, 1/4” & 1/8” G-659-901 $15.60
White plastic boots fit over the following sizes:
n Static Wick Protectors with Wing Marker All Code 7
16” Fabric Flag 5” red soft plastic boot, 3-pack.
7101-5 G-659-500 $15.00
Fits Dayton-Granger #16920 and similar types.
16” Fabric Flag 3” red soft plastic boot, 3-pack.
8808-7 G-659-900 $15.00
Fits Dayton-Granger #16305, #16310 and similar types. G-659-500 G-659-900
LUBRICANTS
B-247-000 B-247-001
ADDITIVES
K-246-000
K-245-000
Alcor TCP Fuel Treatment Is accepted by the FAA for use in non-exhaust driven turbo charged AVL Light Lubricant The Light lubricant and rust inhibitor that penetrates and displaces moisture
Lycoming, Continental, Franklin, Pratt & Whitney, and Wright reciprocating engines. Prevents fast, leaving a delicate coating for excellent lubrication and rust protection. A fine, light film that
lead fouling. Code 4 resists the accumulation of dust and dirt. Ideal for drying and protecting electrical connectors
Quart M-596-100 $57.00 and delicate machinery. Mil Spec: MIL-C-23411A. Code 5
Alcor TCP Fuel Treatment Dispenser Calibrated for proper dosage of the number of gallons 11 oz. aerosol K-413-000 $8.10
treated for 100LL grade of avgas. When proper dosage is in dispenser, remove from container AVL Medium Lubricant The Medium lubricant and corrosion preventer. It is specifically
and inject into aircraft fuel tank. Code 7 designed to penetrate and displace moisture fast. It leaves a medium weight oily coating for
M-596-300 $5.75 long-term lubrication and rust prevention. MIL-C-16173D Grade 3. Code 5
Decalin RunUp™ Fuel Additive Our customers have found this equivalent to TCP and it is 11 oz. aerosol K-413-001 $9.15
formulated to react with lead after combustion to prevent lead oxide build up on valves and AVL Thick Lubricant The Thick lubricant and corrosion preventer. Penetrates and displaces
still allow the lead to perform the anti-knock function prior to combustion. Prevents valve moisture. It stops corrosion on contact leaving a thick coating for long term lubrication and
seat erosion from valve seat micro welding. Does not contain volatile solvent so it is safe in corrosion prevention. MIL-C-81309D Type II. Code 5
the cockpit. Graduated measuring and dispensing reservoir built into the bottle. Tested and 11 oz. aerosol K-413-002 $8.10
stable down to 0˚ F and is not approved for use in the engines of certified aircraft. Use 1/2 oz.
per 10 gallons fuel. Code 8 AVL Electro Contact Cleaner II This premium aviation cleaner penetrates fast, cleans and
degreases, removes dust and build up without leaving oily residue, safe on most surfaces. For
16 oz. Bottle K-451-000 $27.25 use on avionics, instruments, radios, etc. Code 7
32 oz. Bottle K-451-100 $45.15 11 oz. aerosol K-414-000 $14.95
ASL CamGuard Is an additive formulated to supplement specific functions in a wide variety of motor EZ Turn Lubricant A specialty lubricant/sealant used for fuel and oil line
oils. Designed to dramatically improve the performance of all mineral based, semi-synthetic and fully valves & is resistant to high temps. Especially effective where high octane
synthetic motor oils in the areas of corrosion protection, wear reduction, and seal protection. It is FAA fuels and aromatics are present. Also extremely efficient as a gasket paste &
Approved and accepted on piston engines. Approval pending for turbocharged engines. Code 9 anti- seize agent and will not gum, crack or dry out. Excellent for tapered plug
Pint K-245-000 $24.95 valves, aircraft engine manufacturing, and marine applications. EZ Turn is the
Case of 4 K-245-100 $94.50 functional equivalent of fuel lube. Mil-Spec Mil-G-60320 AM 1 type 1. Code 5
AVBlend This is the only FAA approved pure lubricant specially formulated to penetrate the
K-454-000 5 oz. tube K-454-100 $22.50
internal surface of aircraft engines. Compatible with all conventional and synthetic oils. Does not 1 lb. can K-454-000 $29.50
contain Teflon (PTFE), MOLYS, TCP or any other solids or harmful chemical. It manages critical AIM-A-SQUIRT Allows spray lubricants, cleaners, dust-removers
engine temperatures, minimizes carbon build-up and premature wear and restores performances to precisely apply in confined or hard-to-reach areas while
to engines with accumulated hours. Code 9 allowing the can to remain upright. Includes two tubes of
12 oz. Can K-246-000 $14.75 different diameters and will interface with all can nozzles. Code 7
4 Pack K-246-100 $57.00 K-433-000 $4.95
14 | onlinecatalog.wagaero.com | 1.800.558.6868 | Prices and Supplies are subject to change without notice
MAINTENANCE CLEANERS
Description Cat. No. Price Description Cat. No. Price
Plexus Cleaner Clean and protect your aircraft with this plastic Extreme Simple Green Aircraft and Precision
cleaner. Convenient aerosol applicator, simply spray and wipe. No Cleaner The water-based formula cleans
buffing, mess, or waste. Code 7 engines, aircraft, vehicles, metals, plastics,
7 oz. Can K-400-100 $16.75 high tech alloys and parts. This non-
corrosive, low foaming cleaner degreaser
13 oz. Can K-400-000 $21.00 does not contain reagents that oxidize
Prist Acrylic, Plastic & Glass Cleaner Non-abrasive cleaner works finishes, cause rust or degrade elastic
on acrylic, stretched acrylic, polycarbonate, lexan, glass and materials such as rubber or vinyl. Protects the
coated glass windscreens. Dissolves grease and sticky residue, life of hoses, seals, gaskets, paint finishes and
while preventing static charge build-up. Code 7 hard surfaces. Meets Boeing Spec D6-17487P.
Code 7
13 oz. Aerosol Can K-272-000 $7.70
K-400-100 Spray Bottle,
K-449-000 $12.50
32 oz.
Container, 1
K-449-001 $19.50
gallon
Pail, 5 gallon K-449-002 $87.00 K-449-001 K-449-000
POLISHES
K-412-002
AIR FILTERS
n Brackett Air Filters Complies with A.D. 96-09-06
FAA Approved Excellent protection from foreign material entering system. Fire retardant
and repels water. All Code 4 Replacement for P/N 40599 filter, Cont. A-65 thru C-90. STC’d 2. 3. 4.
1.
for the following models.
Cessna Piper
120, 140, 140A, J-3, 4, 5; PA-11,11S, 12, 12S, Air-Maze Air Filter Assemblies
150, 150A-H, PA-16, 17, 18, 19, PA-20, 120, Description P/N Code Cat. No. Price
J-M, 152, A-152 135, PA-22 A11, PA-38 1. Taylorcraft L-2 Size 5” x 5-1/2” x 2” 13178 8 I-834-000 $73.50
Other Aircraft Types 2. Continental A-65 thru C-90, J-3, Luscombe 8A-8F, Cessna 140, 150,
Bellanca 7ACA, 7ECA w/Cont. O-200A, 7FC, Swift GC1A Size 5” x 5-1/2” x 1”
65CA; Luscombe 8, 8A thru 8F; Mooney, M-10;
13203 8 I-801-000 $88.50
Taylorcraft; Varga 215OA, Univair Aircoupe (Alon).
3. Fits Aeronca 7AC & 11AC Size 6” x 5-1/2” x 1-1/2”
Description P/N Cat. No. Price 2-849 4 I-802-000 $106.90
Complete Filter Assembly BA-4106 I-345-001 $65.95 4. Ercoupe C-75 & 85 Size 5”O.D. x 1” 40485-1 8 I-803-000 $77.50
Replacement Filter BA-4108 I-345-002 $9.50
n Brackett Air Filter Assemblies & Replacement Filters Code 4 * While Supply Lasts
Assy. Filter
Aircraft Complete Filter Application Assy. P/N Cat. No. Filter P/N Cat. No.
Price Price
Aero
A9, A9A, A9B BA-104 I-344-001 $33.50 BA-3 I-344-002 $16.45
Commander
7GC, 7GCA, 7GCB, 7HC, 7KC, 17-30A BA-104 I-344-001 $33.50 BA-3 I-344-002 $16.45
Bellanca
1974 & up Models: 7GCAA, 7GCBC, 7KCAB, 8KCAB, 8GCBC, 4-19-3A, 17-30 BA-8110 I-346-001 $87.97 BA-8103-1 I-346-002 $19.85
Champion
Pre - 1974 Models: 7GCAA and 7GCBC, 7KCAB, 8KCAB, 7ECA. BA-106 I-364-001 $35.00 BA-11 I-364-002 $16.10
23, A23, A23A, A23-19, A23-19A, A23-24, B23 BA-104 I-344-001 $33.50 BA-3 I-344-002 $16.45
Beech 33, A33, B33, C33, E33, F33, G33, B35, C35, D35, E35, F35, G35,H35, J35, K35, M35, N35, P35, V35 BA-7112 I-353-002 $16.55
E33A, E33C, F33A, F33C,G35, S35, V35, V35A, V35B, 36, A36. BA-7112 I-353-002 $16.55
170, A, B, 172, 172A thru M BA-5110 I-351-001 $70.65 BA-6108 I-349-002 $11.25
172N, P, F, 172N, P BA-5110A I-362-001 *$70.65 BA-6108 I-349-002 $11.25
175, 175A, B, C BA-8 I-366-002 $13.00
Cessna
180 for 1953 thru 1955 BA-8005 I-365-002 $14.50
180A & Up, 182 All Models,185 All Models. BA-8110 I-346-001 $87.97 BA-8103-1 I-346-002 $19.85
206 All, 207 All, 210D thru 210N (S/N 64135) BA-2205L I-354-002 $22.40
Ercoupe 415C, 415CD, 415D, 415E, 415G BA-8810 I-369-001 $51.80 BA-8805 I-369-002 $11.35
Grumman AA-1, AA-1A, AA-1B, AA-1C, AA-5 BA-4108 I-345-002 $9.50
M18C BA-5110 I-351-001 $70.65 BA-6108 I-349-002 $11.25
M20, M20A, B, C, D, G BA-6110 I-349-001 *$83.10 BA-6108 I-349-002 $11.25
Mooney
201, M20J BA-6205 I-357-002 $15.50
Super 21, M20E, F BA-6305 I-356-002 $23.25
PA-28R-180, PA-28R-200, PA28R-201, PA28RT-201, PA-30-160, PA34-200, PA-39 BA-10 I-359-002 $25.25
PA-18A, PA18-150, 18A-150, 185-150, 18A5-150, S/N 18-6964 & Up BA-112 I-358-001 *$62.70 BA-13 I-358-002 $28.30
Piper PA-23-235, 250, PA-24-180, 250, 260, PA-25-150, 235, 250, 260, PA-28-140, 150, 60, 180, 235, PA-28-181,
BA-104 I-344-001 $33.50 BA-3 I-344-002 $16.45
201T, PA28RT-201T, PA-32-260, PA32-300, PA32R-300, PA32RT-300, PA32R-301, PA34-200T, PA34-220T
PA36 w/Cont., PA36-300, PA36-375, PA-28-151, 161. No frame required BA-16 I-360-002 $10.80
CORROSION PROTECTION
Description Cat. No. Price Description Cat. No. Price
Fluid Film Rust & Corrosion Protection 11-3/4 oz. REJEX by Corrosion X Ultimate protection from this advanced polymer coating (no
K-434-000 $10.95
penetrant and lubricant. 12 total per case. Code 8 abrasives) which seals painted surfaces and protects against stains such as exhaust gases,
Corrosion X A special military and Mil. Spec. approved corrosion rust oil, grease, tar and bug acids. Use on leading edges of wings, the empennage, cowlings
treatment, Corrosion X’s powerful attraction to metal causes it to spread or even the entire airframe. Typically treats a single-engine airplane. As an added bonus,
and penetrate the tightest skin laps around rivets and screws. It becomes REJEX reduces drag. Usable on your car, boat, truck, RV or motorcycle. Code 5
the nearly perfect insulator, separating moisture from metal to stop 16 oz. Bottle K-391-000 $22.35
electrolysis and further oxidation. Prevents corrosion and freezing in ACF-50 is a state of the art, anti-corrosion/lubricant compound that has been
K-434-000 K-393-000 switches and mechanisms, and lubricates control cables very effectively. specifically designed for aviation. It actively penetrates all seams, around rivets
K-391-000
MIL-C-81309E. A state of the art, anti-corrosion lubricant. Code 5 and screws and prevents further oxidation. ACF-50 is consumed over a period of 24
16 oz. Aerosol Spray Can, Treats up to 4 struts K-393-000 $18.75 months, leaving no residue. Ideal for stabilizers, micro switches, avionics, electrical
16 oz. Non-Aerosol Spray Bottle, components and cables. ACF-50 stops corrosion and restores conductivity and circuitry.
K-393-200 $18.75 It cuts through corrosion buildup and loosens seized parts. Meets Mil-C-81309E. Type
Treats up to 4 struts
II and III. Code 7
Gallon will provide complete coverage for up to
K-393-100 $115.00 13 oz. aerosol K-337-001 $16.50
three 4-place general aviation aircraft.
*Strut equipped Piper aircraft must comply with Piper Bulletin 5280C lift 1 Quart w/spray bottle K-337-003 $29.95
K-393-100
strut assembly inspection for a strut treatment kit. *While Supply Lasts Gallon K-337-002 $80.00 K-337-001
16 | onlinecatalog.wagaero.com | 1.800.558.6868 | Prices and Supplies are subject to change without notice
M-249-000
M-249-000 $56.95
Hand Fluting Tool Produces neat, even crimps. M-251-000 $25.00
Hand Seamer For sheet work. Deep jaws. Produces neat, tight fold and seams. M-250-000 $26.65
M-241-100
Sheet Metal Practice Kit Includes 4130 flat steel stock in assorted sizes and thicknesses for practice with the tool
above, or for practice welding.
M-247-416 $11.95
Practice Welding Material Kit Includes miscellaneous tubing in assorted sizes and wall thicknesses for practice
Spark Plug Trays Steel tray holds up to 12 spark plugs for the convenience welding.
and ease of handling plugs. Tray is numbered to correspond with engine
cylinders. Protects plugs against contamination. Code 7 M-247-411 $15.75
Champion Red Tray, Size: 5-3/4”H X 8”L X 3-3/4”W M-241-000 $66.12
Forbes Blue Tray, Size: 5”H X 8”L X 3-1/2”W M-241-100 $32.30
Impulse Magneto Coupling Puller Code 7
T-106 M-943-000 $167.55
Timing Pin T-118-10 M-944-000 $10.35
E Gap Tool T-150-10 M-945-000 $24.55
Impulse Coupling Inspection Gauge Code 7
T-155 M-946-000 $100.60
M-946-000
Spark Plug Socket w/Magnetic Interior Easy installation
or removal. Works with all Champion and Autolite aviation
spark plugs. Made of chrome vanadium steel. Code 7
ATS950 M-936-000 $32.00 M-251-000
M-944-000
M-945-000
M-250-000
M-896-300
MISCELLANOUS TOOLS
M-896-100 n Cleco Tool, Fastener All Code 7
n Oil Filter Tools All Code 7
Cleco Pliers M-259-000 $5.95
Description P/N Cat. No. Price
Fasteners Cadmium, 3/32” M-259-100 ea. $.63
Oil Filter Cutter Kit Filter turns easily against the heat treated 4140 steel
cutting edge. Blade replacement needed after approximately 50 uses. Copper, 1/8” M-259-200 ea. $.63
Includes oil filter cutter adapter. M-896-300 $67.00 Black, 5/32” M-259-300 ea. $.63
Replacement Cutter Blades M-896-100 $9.65 Brass, 3/16” M-259-400 ea. $.63
Oil Filters on page 12 M-259-000
18 | onlinecatalog.wagaero.com | 1.800.558.6868 | Prices and Supplies are subject to change without notice
M-411-000
M-403-000
M-585-000 M-339-000
blades. Handles cable up through 3/16” wire rope and 1/16” 7 M-339-000 $59.45
dia. spring wire. Triangle jaws never leave a frayed end. M-440-000
SAF-T-BLOKS Synchronizer w/Tweeter Measure the change of inductance in the magneto coil when points
open or close. 100% solid-state, latest digital integrated, fail-safe circuitry. Accurate readings
from LED display and four phase audio signal make adjustments simple. Strong anodized
aluminum case, unit measures 3/4” x 3” x 5”.
TP-105 7 M-411-000 $65.35
Timing Light Easy to install, compact unit gives an extra margin of safety by creating perfect
timing of magnetos and synchronizing magnetos to engine. Fail-safe circuitry. 6-1/2”wide.
TP-102 7 M-403-000 $101.12
M-822-000 M-821-000 Timing Indicator Complete with top dead center locator and mounting bands. Accurate to
within one-half degree.
7 M-440-000 $80.90
Description Code Cat. No. Price
Piston Stop For above timing indicator. 7 M-440-100 $18.50
Standard Aero Bolt Accepts 8-32, 10-32, 1/4-20, 1/4-28, and
5/16-24 bolts. Just thread bolts into required depth, then drill 7 M-822-000 $31.75 Mag-Lock Tool Now make mag replacing simple. Use of the mag-lock tool permits magneto
hole in bolt. locking so that readjustment of point and subsequent installation on the engine is eliminated.
For most Bendix mags.
Nut Accepts nuts up to 3/4” diameter. Insert nut into V groove,
7 M-821-000 $34.25 7 I-330-000 $20.10
tighten down with bolt supplied and drill diagonal hole.
Made of ductile iron to insure a non porous finish which is very important in order to have that
highly polished finish, heat treated to 38-42 RC and can be re-polished many time without
changing hardness. Work surfaces are highly polished.
Description Code Cat. No. Price
TP692 7 M-254-001 $18.33 Military Style Tool Bag
M-940-000 Ideal for tools or light travel, this olive drab canvas tool
TP669 7 M-254-002 $17.40 bag has a roomy main compartment, two outer snap-shut
TP670 7 M-254-003 $24.00 accessory pockets, plus inside dividers. Hard fiber shape-
TP1111 7 M-254-004 $32.85 retaining bottom and brass zipper. 11” x 7” x 6”. Code 7
Cat. No. M-266-000 $11.90
TP1112 7 M-254-005 $49.87
Prices and Supplies are subject to change without notice | 1.800.558.6868 | onlinecatalog.wagaero.com | 19
M-336-000 M-275-000
M-406-100
brake rivets every time without damaging the liner. Code 7
M-406-100 $36.25
SHOCK CORD TOOLS
Description Cat. No. Price
PRESSURE TESTER Strut g
Shock Cord Tool Use with shock cords
already on aircraft. With little effort install
shock cords on most aircraft. Not for use
with hydrasorb shock struts. Code 7
M-008-000 $299.00
Shock Cord Tool Use before mounting strut
on aircraft. Fits J-3 shock struts only. An
easier way to install shock cords! Code 7
M-410-100
M-410-200 M-008-000
M-528-000
M-528-000 $172.75
M-410-300
M-410-000
M-932-000
AVIONICS HEADSETS
C-300-000 C-237-000
C-257-000
C-259-000
n by David Clark FAA Approved. Five Year Manufacturer’s Warranty All Code 4 n by Flightcom Standard Features for all Flightcom Headsets include, Noise Cancelling Electret
Description Cat. No. Price Mike, Volume Control, Chrome Plated Brass Plugs, Shielded Cables, Stereo/Mono Versatility, High
Fidelity Speakers and Mic Cover. Three Year Manufacturer’s Warranty. All Code 7
Lightweight Model 10-13.4 (Wt. 13.4 oz.) Guaranteed to be the most comfortable Noise-
Attenuating Headset. Quality without the hot spots, clamping and weight discomfort. The Description Cat. No. Price
universal flex boom, exclusive M-7A, the most advanced noise-cancelling, amplified electret 4DLX Classic (Wt. 16.8 oz.) Unit has an articulated boom system, new precision flex boom,
microphone available. Low-profile volume control knobs with detent settings, lightweight, liquid and foam ear seals, and an air pillow headband. Mic muff and cloth ear covers are
certified noise reduction rating - 23dB, drastically reduced head band force. New soft airflow included. 3 yr. warranty. Call for special pricing.
pillow head pad with Flo-Fit™ gel ear seals and a new molded cord assembly made to C-300-000 $149.00
exceptional pull and flex standards.
Call for Special Pricing 4DX Classic (Wt. 16 oz.) Offers excellent noise reduction with the comfort of liquid filled ear
seals and ventilated headband. Features an articulated boom system. Call for special pricing.
C-259-000 $336.42
C-237-000 $129.00
Model H10-20 (Wt. 1 lb. 2 oz.) The most advanced noise-cancelling amplified electret
microphone available with contouring pillow pad head band and liquid filled ear seals for
proper noise attenuation. Includes volume control knob and new advanced durable cord
assembly and dual plugs. n Aircraft Radio Faceplate Inserts by Aircraft Engravers
Call for Special Pricing These quality faceplate inserts are custom made from .032” thick matte black plastic with
white text. Instructions included. Install with double faced tape. Can be custom made for over
C-257-000 $370.14
64 different radio types, including ARC/ Cessna, Collins, King, Mitchell, Narco, Piper and TKM.
OEM Faceplate Application Code Cat. No. Price
ARC/Cessna R-546E 8 C-375-007 $20.25
ARC/Cessna RT-328T 8 C-375-008 $31.50
ARC/Cessna RT-359A 8 C-375-009 $25.50
ARC/Cessna RT-385A 8 C-375-010 $22.50
King KMA 20 8 C-375-011 $28.20
King KT 76 8 C-375-013 $10.50
King KT 76A 8 C-375-014 $10.50
King KX 170B 8 C-375-015 $31.50
King KX 175B TSO 8 C-375-017 $31.50
HEADSET ACCESSORIES
Description Code Cat. No. Price
Comfort Ear Seals for Flightcom 4DX, C-171-000
7 C-307-000 pr. $38.75
4DLX & 5DX C-170-000
You can mix and match components to build your own custom system.
For example, add C-367-200 plus C-367-007 plus C-367-009 to get a rail
mount system that can attach to the plastic holder for a Garmin 295
or 296, to place entire unit on a tube.
ENCODERS
C-260-100
Orion 600 LED Wingtip Position/Anti-Collision Light FAA/TSO’d. 2.04” H x 1.78” W x 5.65” L
12V Green w/Strobe, .5 lbs. 01-0771733-01 B-246-001 $561.75
12V Red w/Strobe, .5 lbs. 01-0771733-02 B-246-002 $561.75 ORION™ 600
5.65”
Orion 500 LED Tail PTA Light Visible 1.34” H x 1.71” W x 1.75” L
1.70” 1.75”
12V White, .29 lbs. 01-0771774V01 B-259-012 $455.00 (43mm) (44mm)
ORION 500
Sale 2x ø .125 THRU
(For Install with #4 Screws)
ø1.150”
1.75”
(44mm)
.875” (22mm)
B-227-002
B-259-012
Sale
PAR36
Landing Light
PAR 46
Landing Lights Sealed beam aircraft lamps for landing light, taxi light, recognition and search
Taxi Light light applications. 12V and 24V applications. Note: “H” stands for Halogen 50 watt, 100,000
candle power and equal light output. The “Q” is a Powerful 100 watt Halogen with 140,000
candle power and is 30% brighter. Both have 4 times longer life! Limited Supply!
n Landing & Taxi Light Replacements P/N Watt Volt GE Cat. No. Code Price Generic Cat. No. Code Price
PAR36 - Plus Series LED® 40% BRIGHTER! FAA/PMA approved, these lights are a drop-in 4509 100 13 B-159-100 4 $15.50 B-159-000 8 $7.95
replacement for outdated halogen or HID lamps. Lightweight, low-current and moisture
resistant, they provide stable light output for thousands of operating hours. Three year warranty. 4522 250 13 B-160-000 8 $16.85
Made in USA. 14V = 1.36 amps @ 14VDC. 28V = .68 amps @ 28VDC 4.38” round x 1.75” face to 4553 250 28 B-152-100 4 $23.50
screw terminal. Code 4
Q4509 100 13 B-212-000 8 $12.95
Description Model No. P/N Cat. No. Price
H7604 50 12 B-147-100 4 $27.50 B-147-000 8 $9.50
14V Landing Light P36P1L 01-0771833-10 B-251-000 $270.00
14V Taxi Light P36P1T 01-0771833-15 B-253-000 $270.00
28V Landing Light P36P2L 01-0771833-20 B-251-028 $245.00 BEACONS & STROBES Non-TSO’d
PAR46 - Plus Series LED® 40% BRIGHTER!
Same as above, except replacement lamp for PAR-46 halogen or HID lamps. 14V = 2.6 amps @ n Kuntzleman Red LED Beacon
14VDC. 28V = 1.3 amps @ 28 VDC. 5.65” round x 2.25” face to screw terminal. Code 4 Aviation red LED with a clear polycarbonate
14V Landing Light P46P1L 01-0790750-10 B-252-000 $295.00 Fresnel lens, this self-contained 14V beacon uses surface
mounted LED technology and meets FAA requirements
28V Landing Light P46P2L 01-0790750-20 B-252-028 $295.00 or anti-collision light systems in both airplane and
rotorcraft categories. This rugged little unit measures
1.7 inches in dia., 3.5 in. tall and weighs 8.4 oz. The
average current draw at 14V is 0.6 amps. It has a flash
LED BEACONS FAA/TSO’d rate of 60 per minute and will not produce EMI or RFI
interference. Projected life is up to 100K hours. Mounts with a #10-32 stainless steel stud that
n Whelen LED Beacons is in the bottom center of the base. Code 8
71080 Series Red LED Beacon with Clear Lens, FAA/ Description P/N Cat. No. Price
TSO’d Red LED 14 VDC RACB B-288-000 $224.95
For fixed wing aircraft. LEDs have direct DC voltage
hook up without any need for a power supply. Designed
to replace existing beacons utilizing a 2-1/2” diameter n PSA LED Anti-Collision Beacon
footprint. (Ref. Class I - 150 effective candlepower). LED self-contained based anti-collision beacon. Lighter, brighter
Internal mounting plate provided with choice of mounting and cooler. Draws 0.2 amps at 12 VDC. Weighs only 1.6 ounces. High
holes to retrofit most existing mounting patterns. Code 4 impact polycarbonate optical lens. Up to 50,000 hr. life. Measures
Description P/N Cat. No Price approximately 1.6” high and 1.4” in diameter. Includes flasher. All Code 8
14V LED Beacon, Red .65 lbs., 2.6” Mount Clear LED 927ACB-C-12V-45 B-214-005 $109.50
Replacement Bulb P927-45-12VW B-214-006 $55.50
01-0771080-51 B-260-001 $650.00
Red LED 927ACB-R-12V-45 B-214-007 $109.50
14V LED Beacon, Red w/3.75” Adapter, Flying Leads B-214-005
B-260-001 Replacement Bulb P927-45-12VR B-214-008 $55.50
B-260-002 01-0771080-55 B-260-002 $725.00
90520 Series LED Flashing Beacon, FAA/TSO’d n Kuntzleman LED Strobe
Self-contained LED anti-collision lights are designed to The SC-LED strobe is a self-contained white LED 12/14 VDC operated strobe
replace strobe light heads as small as the A470A with light. Designed specifically for use where an external 12 VDC power source
available models to replace HR self-contained beacons (battery) is available. Its size is the smallest of any self-contained LED strobe
(HRCFA) or legacy 70900 LED beacon. (Ref. Class III 100 light in its class. Measuring 2.5” diameter at the base by 4.75” tall and weighing
effective candlepower) Mounting plate included with only 7.8 ounces. It is fitted with a Fresnel lens. The flash is in a 5 MULTIPLE
assembly. Code 4 BURST PATTERN of 72 cycles per minute. Power consumption is 500 ma (1/2
14V LED Beacon, Red/White, .65 lbs. Amp) with an average draw of 0.3 Amps. The SC-LED strobe is mounted with
a 1/4 X 20 stud located in the center on the bottom of the unit. A stainless
01-0790520-51 B-261-001 $650.00
steel tang is supplied for mounting. Its rugged construction makes it a great
14VDC Beacon, Red/White w/3.75” Adapter, Flying Leads economical stand-alone unit. Code 8
B-261-001
B-261-002 01-0790520-55 B-261-002 $725.00 White LED 12/14 VDC SC-LED B-287-000 $159.95
26 | onlinecatalog.wagaero.com | 1.800.558.6868 | Prices and Supplies are subject to change without notice
B-137-004
B-101-002
n Whelen Wingtip Position Light A555A Tail Light Exposed height: 1.4” (36mm), mounting diameter: 1.06” (27mm), power
A600 PR Wingtip Position/Strobe Light Gasket Code 4 consumption: 1 amp @ 28 VDC, 28 volt only,0 weight: 0.1 lbs. (45gm).
Description Code P/N Cat. No. Price
Description P/N Cat. No. Price
Gasket Only for A650 or A600 Vertical Mounted
W1283 B-137-038 $19.50 4 A555A-V-28 B-101-002 $50.00
SALE! While Supply Lasts! Tail Light
Horizontal Mounted Tail Light 4 A555A-H-28 B-101-004 $50.00
Replacement Bulb 8 GE93 B-142-000 $.55
A650 Wingtip Strobe Add-On For updating lighting systems on
homebuilt and production aircraft. Two A650 Wingtip Lights may be
added to existing Whelen W1285 position lights. Also fits most
Grimes Type E lights. The wingtip strobe retainer supports the
position light tip as the original retainer did, and is interchangeable
with the A429. Needs additional power supply. Code 4
Strobe Add On A650 B-137-004 $232.50
easy ways
to order!
n www.wagaero.com n The Flight Strobe FS4400
by Universal FAA/PMA’d
Modern technology and circuitry has been applied to develop this strobe to a point of
n 24-Hour Order Line 1.800.558.6868 unmatched reliability, visibility and longevity. This compact unit mounts easily on top or bottom
fuselage and directly replaces rotating beacons. Features clear lens and 3-3/4” dia. mounting
base. One year MFR’s. warranty or 500 hours. STC’d for Cessna 180 series. Form 337 Field
n 24-Hour Fax 1.262.763.7595 Approval required for other applications.
Description Code P/N Cat. No. Price
B-214-001 B-214-101
B-214-002 B-214-102 B-168-000
B-214-003 B-214-103 B-169-000
B-114-000
B-105-000
B-109-001
B-136-002 B-143-000
(lens only) B-146-000
B-214-004
B-137-006
B-137-027
B-137-013
B-138-000 B-140-000
B-137-001 B-137-043
B-137-025
n Whelen Power Supplies
B-111-000
Description Code P/N Cat. No. Price
HDACF Power Supply 14/28 Volt. Provides four high-energy pulses with twice the visibility. 42
bursts per minute per light. Can flash simultaneously, alternate flashing or both. The wingtip
appears as a continuous streak of light. No increase in power required. Wing outputs can be
disabled when trigger function is activated. Operates one, two, or three strobe lights. 14 Volts,
current draw 7 amps/ 28 Volts, current draw 3.5 amps. 5.5" L X 2.37" H X 5" W.
Wt. 2.1 lbs. 4 AHDACF B-137-001 $810.00
A490TCCF Strobe Power Supply This model is designed for installation adjacent to the strobe
but has a mounting plate with additional holes that directly replaces factory installed systems
on single engine Cessnas, Aero Commanders, and Grumman Americans. 14 Volts, current draw
1.7 amps/ 28 Volts current draw .85 amps. 5” L X 2.38” H X 3.12” W.
Wt. 1.2 lbs. 4 A490TCCF B-137-043 $767.00
A490ATSC Strobe Power Supply 14/28 Volt. The HTS, CF produces an accumulated 34 joules
of energy. Equipped to flash simultaneously with up to 5 other HTS, CF power supplies by
connecting an 18 gauge wire between the synchronization mechanisms in each power supply.
Unit powers one strobe only. An 18 gauge low voltage wire supplies power to each HTS power
supply, 5” L X 3.06” H X 3.12” W.
Wt. 1.7 lbs. 4 A490ATSCF B-137-025 $746.25
B-109-200
GILL BATTERIES
I-896-000 I-972-000
I-889-000 I-963-000 I-895-000
Batteries are shipped dry charged with battery acid included separately, except to Hawaii, Alaska, Canada or any foreign country where, due to shipping regulations, acid cannot be included. Air
shipments not permitted. Batteries are shipped individually. All Code 4.
Power Performance 30-Min.
1-Hr. Approx. Wt.
Part No. 23°C -18°C -30*C Emergency Voltage Size Cat. No. Price
Capacity, C1 w/acid
(75°F) (0°F) (-22F) Rate, 2C
Gill 7000 Series Sealed, Non-Spillable (2-Year Mfr. warranty)
Ipp, A 875 635 600
7025-20 20Ah 32A 12 7.71” x 5.19” x 7.245” 23 lbs. I-889-000 $261.87
Ipr, A 700 430 440
Ipp, A 1,599 1,100 850
7035-28 28Ah 45A 12 9.78” x 5.16” x 7.3” 29 lbs. I-963-000 $276.71
Ipr, A 1,088 840 600
7243-14 14Ah 22A 24 8.6” x 7.313” x 6.73” 30 lbs I-983-000 $644.82
Ipp, A 1,100 640 495
7243-16 16Ah 25A 24 8.6” x 7.313” x 6.73” 30 lbs I-895-000 $786.00
Ipr, A 480 300 250
Gill 2-Year Mfr. Warranty (6 mo. full, prorated 18 mos.)
G-25, 225 Cold Cranking Amps 18Ah 30A 12 7.75” x 5.19” x 7.41” 21 lbs. I-896-000 $213.26
G-35, 250 Cold Cranking Amps 23Ah 40A 12 9.78” x 5.16” x 7.41” 27 lbs. I-897-000 $263.68
Gill 1-Year Mfr. Warranty (6 mo. full, prorated 6 mos.)
G-242, 150 Cold Cranking Amps 10Ah 17A 24 7.71” x 7.37” x 6.5” 27 lbs. I-968-000 $480.90
G-246, 250 Cold Cranking Amps 19Ah 32A 24 9.70” x 7.35” x 7.45” 41 lbs. I-972-000 $519.15
Standard equipment in many production aircraft and manufactured to provide optimum performance and battery
life. Batteries are furnished with electrolyte except when shipped overseas. Two-Year Manufacturer’s Warranty with 6
months full and 18 months prorated (M means manifold venting. No battery box is required) FAA/PMA’d Code 4
Power Performance
Battery Gill Amp
Part No. 23°C -18°C -30*C Size Cat. No. Price
Type Equivalent Hrs
(74°F) (0°F) (-22F)
Ipp, A 700 450 325 7.71”L X
RG 25 VRSLAB 5.18”W X 22 I-277-000 $278.00
Ipr, A 500 375 250 6.81”H M-895-000
M-895-001
Ipp, A 1,000 675 475 9.78”L X 3-Pin Jumper Cable Model 6141 four gauge booster cable (15 ft. long).
RG 35A VRSLAB 5.17”W X 29 I-278-000 $350.00 Standard three pin female plug on one end and 500 Amp alligator clamps on
Ipr, A 800 575 350 6.83”H the other end.
Ipp, A 1,200 800 625 9.78”L X 7 M-947-000 $208.60
RG 35AXC VRSLAB 5.17”W X 33 I-880-000 $382.00 Piper Jumper Cable Model 6142 four gauge booster cable (15 ft. long).
Ipr, A 900 700 550 6.83”H Special Piper single pin plug on one end and 500 Amp alligator clamps on
Ipp, A 625 350 250 8.65”L X the other end.
G-241 &
RG 24-11M VRSLAB 7.31”W X 11 I-280-000 $671.00 7 M-948-000 $247.15
G-243 Ipr, A 450 250 200 6.63”H
Piper Style Ground Plug Female single-pin plug with brass terminal for
Ipp, A 850 575 450 8.65”L X cable connection and ground return terminal. Mates with Piper ground plug
G-241 &
RG 24-15 VRSLAB 7.15”W X 13.6 I-886-000 $696.00 receptacle. No soldering required.
G-243 Ipr, A 600 375 350 5.95”H
7 M-895-000 $31.65
Ipp, A 850 575 450 8.65”L X
G-241 & Piper Style Ground Receptacle Brass male tip is insulated to avoid short
RG 24-15M VRSLAB 7.15”W X 13.6 I-887-000 $696.00
G-243 Ipr, A 600 375 350 circuits. 3/8” dia. fits size “O” cable. Fits female Piper ground plug Cat. No.
6.63”H
M-895-000 (above). Cover is spring loaded, closes flush to aircraft. Install on
Ipp, A 900 600 475 9.77”L X
any solid area of aircraft.
RG 24-20* VRSLAB 7.51”W X 19 I-884-000 $850.00
Ipr, A 600 475 375 6.63”H 8 M-895-001 $26.25
30 | onlinecatalog.wagaero.com | 1.800.558.6868 | Prices and Supplies are subject to change without notice
n Ignition Switches
Description Code P/N Cat. No. Price
Cessna Key Kit For Cessna 150 thru 210. Door locks not included. MEETS CESSNA SERVICE
GS00009
BULLETIN SEB92-29!
OFF-R-L-Both-Start 4 A510-2 A-031-000 $144.75
n Battery Tender Key Kit by ACS Without starter position. Includes ignition switch and two door locks (door and
Description P/N Cat. No. Price baggage) with matching keys.
The 12V Deltran Battery Tender Junior Perfect for all lead-acid, flooded or sealed free Off-R-L-Both 8 A-510-5K A-194-000 $194.00
batteries (AGM and gel cell). Complete 4-step charging program (Initialization, Bulk Charge, Key Kit by ACS With starter position. Same as Cat. No. A-194-000, but with start on ignition switch.
Absorption Mode, Float Mode). Automatically switches to float/maintenance voltage after fully
charging the battery. If the battery voltage drops too far, full charger output power resumes. Off-R-L-Both-Start 8 A-510-2K A-195-000 $209.75
Solid state two color LED indicates stage of charge, spark proof. Reverse polarity protected, Key Kit by Teledyne Continental formerly Bendix with starter position. Includes 2 keys.
12’ output cord, 5 year limited warranty. This trickle charger is lightweight, compact, and fully Off-R-L-Both & Start 4 10-357200-1 A-051-000 $539.00
automatic. Use in small spaces. It will keep your battery fully charged. Code 7
Key Kit by Teledyne Continental formerly Bendix without starter position. Includes 2 keys.
021-0123 GS00009 $36.95
Off-R-L-Both 4 10-357290-1 A-040-000 $459.00
WIRE CONNECTORS
I-299-000
n BNC Connectors All Code 5
Description P/N Cat. No. Price ea.
I-818-000 I-232-000 I-232-001 Solder Screw, Female Plug UG89U C-339-001 $11.30 C-339-002
n Boxes, Terminals, Boots Solder Screw, Male Jack UG88U C-339-002 $3.45 C-339-001
I-900-001
I-900-002
I-900-003
engines replaces old, heavy starters on Continental engines from C85-12 through TSIO-550
AND the continuous running sprag clutch assembly on smaller CMI engines. Light weight,
gear reduction for unmatched torque and low current draw. Simple, bolt-off and bolt-on I-242-000
installation. Two year factory warranty.
Sky-Tec Models Code Cat. No. Price
C12ST2 Key Start Starter O-200 key start & C85, C90, C145 & O-300A-C previously converted
to a key start (by installation of a needle bearing).
4 I-242-000 $1,046.67
KCST2 Conversion Kit Converts pull start to push button start. Includes C12ST/C starter, switch,
wiring harness, STC and instructions for conversion of 0-200, C85, C90, C145 & O300A-C.
4 I-282-000 $1,148.86
Starter Gasket For Continental C85 thru 0300.
Use with Cat. No. I-242-000 and Cat. No. I-282-000.
P/N 653673 4 I-290-000 $8.98
SlickSTART TM FAA/PMA’d. SlickStartTM magneto booster system is a starting booster that I-289-001
delivers up to 340% more spark energy than conventional mags. SlickSTART TM produces
and easier and more reliable start every time, even when dealing with fouled spark plugs,
poor priming, hot engine restarts, and extreme cold weather conditions. SlickSTART TM is not
I-987-000
approved for TCM/Bendix 20, 200, 1200, D-2000 or D-3000 series impulse coupler or retard
breaker magnetos. Can use with either impulse coupled or retard breaker magneto or 12V
or 24V electrical systems. Fits Slick impulse coupled or retard breaker 4200/6200 series and Crush Gaskets / Annular Copper Gaskets
4300/6300 series magneto. .
I.D. Code Cat. No. Price ea. 10+ Price ea.
P/N SS1001 4 I-987-000 $1,022.00
AN900-5 MS35769-5 5/16” 5 I-233-000 $2.20 $1.98
n Continental Starters by B & C Specialty Products
AN900-6 MS35769- 6 3/8” 5 I-233-001 $1.31 $1.18
These starters solve all the problems for other starter
AN900-7 MS35769-8 7/16” 5 I-233-002 $.76 $.68
design have had – worn-out clutches, broken pinions,
nagging oil leaks and catastrophic failure modes. Featuring AN900-8 MS35769-9 1/2” 5 I-233-003 $.65 $.58
the durability of all-steel gears and heavy-duty ball-bearings, AN900-9 MS35769-10 9/16” 5 I-233-004 $.60 $.54
and the efficiency of a high-torque series-wound motor, this AN900-10 MS35769-11 5/8” 5 I-233-005 $1.50 $1.35
starter is light weight. It provides greater starting torque, while
saving 4.3 to 5.2 lbs. over the old key-type and pull-cable type AN900-11 MS35769-13 11/16” 5 I-233-006 $1.35 $1.21
starters (respectively). This is the only starter design on the AN900-12 MS35769-15 3/4” 5 I-233-007 $2.18 $1.96
market that has provided reliable, long-term service for these AN900-14 MS35769-18 7/8” 5 I-233-009 $1.58 $1.42
engines. Includes Installation Kit. Prepayment Required. Shipped
FOB Factory. Shipping charges will be billed after shipment.
I-852-001 AN900-15 MS35769-20 15/16” 5 I-233-010 $2.30 $2.07
B & C Specialty Products Models Code Voltage Cat. No. Price AN900-16 MS35769-21 1” 5 I-233-011 $.70 $.63
12V Continental Starter for Existing Key-Type AN900-17 MS35769-24 1-1/16” 5 I-233-012 $1.58 $1.42
STC/PMA’d for Continental engines (C-75, C-85, C-90, O-200, IO-240 and O-300-A, -B and -C) AN900-18 MS35769-26 1-1/8” 5 I-233-013 $1.29 $1.16
P/N BC320-1 & P/N FK501-1 4 12V I-852-001 $706.35 AN900-19 MS35769-29 1-3/16” 5 I-233-014 $.70 $.63
12V Continental Starter Kit for Pull Cable-Type AN900-20 MS35769-31 1-1/4” 5 I-233-015 $.82 $.74
STC/PMA’d for Continental engines (C-75, C-85, C-90, O-200, IO-240 and O-300-A, -B and -C) AN900-28 MS35769- 48 1-3/4” 5 I-233-016 $.90 $.81
P/N BC320-1 & P/N FK501-3 4 12V I-852-002 $722.30
Prices and Supplies are subject to change without notice | 1.800.558.6868 | onlinecatalog.wagaero.com | 33
M-852-001
I-837-000 I-871-000
M-852-002 M-938-000
M-441-000 I-837-999
0-320 Style Box 8 I-871-000 $276.95 Model 700 Fits Cont. C-125, C-145;O-300; GO-300; IO-360, TIO-360, LTSIO-360; E-165,
E-185, E-225. Also fits Lyc. O-235; O-290; O-320 (except O-320-H), IO-320; AIO-320, LIO-320,
0-360 Style Box 8 I-871-100 $253.85 AEIO-320; O-360, HO-360, LO-360, HIO-360, AIO-360, LIO-360; GO-480, GSO-480, IGSO-
480. 4” Width x 4” Length.
4 M-852-001 $185.95
Model 720 Fits Cont. O-470, IO-470, LIO-470, FSO-470, TSIO-470, GIO-470; IO-520,
I-860-000 GTSIO-520, LTSIO-520; IO-550. Also fits Lyc. O-540, VO-540, TVO-540, IO-540, HIO-540,
AEIO-540, IGO-540, IVO-540, TIO-540, LTIO-540, TIVO-540; IO-720. 4” Width x 4” Length.
4 M-852-002 $185.95
Carb Heat Box Overhaul Repair Kits Extend the life of your present air box using this repair
Safe-HEET Temperature Controller Model 707 Provides temperature control for continuous pre-
kit, which consists of new bearing mounted actuated shaft and arm. 4 ozs.
heat without promoting internal corrosion. Use with any 700 series pre-heaters. Includes 25 ft. cord.
Continental C75, 85, 90, O-200 4 I-867-000 $89.10
7 M-853-000 $76.50
Continental C85, C90 and 0-200 8 I-860-000 $44.50
Tanis Engine Preheat System For ROTAX® 912/914 This preheat system applies heat to
Continental C145, 0300 Airbox Replacement Kit 8 I-860-100 $44.50 strategic locations on the engine including the cylinder heads, crankcase, and oil tank. The
Continental O-300 4 I-867-100 $94.75 kit comes complete with all heating elements, heavy duty wiring harness with 120 volt plug,
installation instructions and documentation.
Continental Air Box Arm Hole Replacement Kit 8 I-860-200 $14.00
8 M-938-000 $687.00
E-314-000 E-317-000
Dow Corning® 732
E-558-000 E-557-000
Multi-Purpose Sealant, 3 oz.
E-315-000 General-purpose bonding and sealing;
n Reusable Valve Cover Gaskets making formed-in-place gaskets. Use
A permanent cure for a chronic problem - the constant leakage of valve cover gaskets on reciprocating engines. Reliable and reusable for service for sealing flashing, vents and electrical
life of the engine. FAA Approved All Code 4 boxes; caulking joints in sheet metal
Description P/N Cat. No. Price stacks and ductwork; making formed-
Continental C-65, C-75, C-85, C-90, C-145, O-200, O-300. 6 holes. RG530162 E-314-000 $8.40 in-place gaskets for compressors,
gearboxes and pumps. Dries clear.
Continental IO-360, TIO-360, TSIO-360. 4 holes. RG632310 E-317-000 $4.25 Remains permenently flexible, resistant
Continental O-470 except A,K; IO-470, IO-520, TSIO-520. 8 holes. RG534857 E-315-000 $9.80 to weathering -76° to 360°F. Conforms to
Lycoming O-235, O-320, O-360, O-540, IO-540 and O-290. 6 holes. RG75906 E-558-000 $9.00 MIL-A-46106. Code 5
Cat. No. K-289-000 $7.70
Lycoming IO-360, GO-435, IO-540, IO-720, GO-480, VO-435, VO-540 and TIVO-540. 8 holes. RG67193 E-557-000 $7.95
36 | onlinecatalog.wagaero.com | 1.800.558.6868 | Prices and Supplies are subject to change without notice
I-301-000
I-301-100
I-899-000
I-899-100 I-245-001
n Lycoming 90 Degree Oil Filter Adapter Kit by B&C Specialty Products n Lycoming Oil Filter Adapter Kits by Casper Labs
Description Cat. No. Price Fits Lycoming engines from O-235 through IO-720 (except 76 series
FAA Approved Fits Lycoming 0-235 through IO-720 engines. Includes mounting hardware, O-320 with single magneto drive). No hoses, fittings or brackets to
gasket and Champion CH-48108-1 filter. Weights 2.25 lbs. with the filter. Prepayment required. contend with. 90˚ oil filter conversion kit includes gasket, two seals
Shipped FOB. Shipping charges billed later. Code 4 and detailed instructions.Average installation time is 1.5 hours. Uses
48108 oil filter listed above.
Oil Filter Adapter Kit P/N BC-700-1 I-899-000 $465.50
Experimental Adapter Only. P/N CL1000A-EXP Code 8 I-301-001 $325.55
Spacer Kit for Oil Filter Adapter Kit May be used with three sizes of spacers to move the
adapter aft - all machined from a solid bullet of aluminum - facilitate installation on a wide Experimental Adapter w/CH48108-1 Kit Code 8 I-301-000 $361.72
range of aircraft. Kit includes hardware and additional mounting gasket. FAA/PMA’d/STC’d Adapter Only.
I-301-002 $345.17
For BC700-1 and BC700-H only. P/N FK502-1.4 I-899-100 $55.00 P/N CL1000A-STC Code 4
FAA/PMA’d/STC’d Adapter with CH48108-1 Kit.
n Lycoming Spin-on Kit I-301-100 $369.75
May require more parts for O-235 engine. Code 4
FAA Approved Convert your engine to a spin-on filter. For Lyc. O-235, O-320 (except O-320-
H2AD), O-340 and IO-720 series. Includes the spin-on oil filter. Adapter P/N 77852, 8-1/2” total Oil Filters on page 12
length with filter. All Code 4
I-245-100 $680.00 n Approved Oil Coolers by Aero-Classics
Base Assembly Only I-245-001 $675.00 P/N FAA Approved Replacement For: Stack Size Code Cat. No. Price
Spin-on Adapter Gasket I-245-003 $6.50 Cessna: 150, 152, 170, 172, 175,
4.5”H x 4 I-820-000 $376.75
177. PA23, PA24, PA28, PA30.
8000075 3.6”W x
Niagara: 20002A, Harrison:
n Remote Mount Oil Filters by Airwolf 8526250, Piper: 18622-00
6.5”L
NO MORE MESSY OIL CHANGES
J-3 Wing Tanks Kit includes mounting brackets, installation instructions, and STC paperwork. E-333-100
Uses Cat. No. E-481-000 gas cap, requires a 2-way shut-off valve Cat. No. G-749-000 and
3/8” x 1/4” brass fuel strainer Cat. No. G-775-000 not included. All Code 4
E-481-000 E-476-200 M-133-000 M-133-100
8 Gallon Kit LH E-426-000 ¨ ea. $560.00 E-482-000
ACCESSORIES
n Gascolator Accessories
Complete Quick-Drain Kit Unit includes high quality bowl, screen,
gaskets, and Curtis drain valve at this one low price. Suitable for
G-604-400 original installation or replacement. Usable on engines up to
200 hp. 2-1/8” dia. 1/4” pipe thread inlet and outlet. Use Cat. No.
G-627-000 mounting bracket for installation. Code 8
G-604-100
I-313-000 Description Cat. No. Price
G-775-000
n 12V Electric Fuel Pump by Facet G-616-000 $97.50
Description Cat. No. Price Firewall Installation Bracket Code 2 G-627-000 $21.50
Inlet-outlet. Can be used as primary or auxiliary fuel transfer pump. Gascolator Firewall Fitting This special bulkhead fitting is designed
I-313-000 $96.95
Facet P/N 480-543. Pumps 6.5 to 7.5 PSI. Code 8 G-616-000 to provide a solid mount for the gascolator as well as a feed through
for the fuel entering. Simply rivet to the firewall and a reinforcing
n Fuel Primer by ACS
G-627-000 plate on the cabin side. Machined from zinc plated 1045 steel. Code 8
The 10920 Fuel Primer by ACS is machined from 6061 Aluminum
G-616-100 $23.50
Billet and anodized per MIL-A-8625. All internal valving
components and springs are made from stainless steel. O-rings G-604-400 $189.00 Gascolator Gaskets & Screen For the gascolator quick drain kits.
are made of Viton. The pump has a detent locking feature and Cork gaskets cannot be used with auto fuel. Screen grade is 120 X
positive fuel cut off when the knob is in the “in” position. Code 8 G-616-100 108 brass, 127 microns. All Code 8
G-626-200 2-1/8” Cork Gasket Only G-603-218 $4.40
n Fuel Primer Seal Kit by McFarlane
2” Cork Gasket Only G-603-200 $5.00
FAA/PMA’d Kit contains two MIL-SPEC fuel-proof
fluoroelastomer (Viton) o-rings required to service most G-604-100 $6.95 2-1/8” Neoprene Gasket
G-603-201 $6.25
standard fuel primers. P/N FPS-KT-1. Code 4 For use with auto fuel.
G-603-200 G-603-201 Replacement Screen G-626-200 $1.75
n Fuel Strainer
n Fuel Gauges by Fuelhawk
For fuel tank outlets. Brass fittings 3/8” male pipe thread which
fits AN867-3 welding flange, and 1/4” female pipe thread for G-775-000 $6.75 Easy to use, simply insert slowly until gauge touches bottom of tank. Place finger firmly over
valve or fuel line fitting. Screen is 16 mesh brass. Code 8 top opening to lock fuel in tube. Remove to see instant readout in gallons usable on calibrated
card. Eliminates the guess work. All Code 7
n Safe-T Syphon
11” Universal Gauge Any aircraft, used for both
Establishes flow, air pressure maintains it. Works on liquids including water, G-780-000 $12.50
main and auxiliary tanks.
gas, kerosene, thinners and paint. Made of copper tubing, a glass marble
and a stainless steel spring. The outlet end is 1/2” standard pipe and can be 16” Universal Gauge For any aircraft, used in
G-780-004 $16.35
attached to a garden hose. Code 7 deeper wing and on tip tanks.
G-852-000 $7.95 26” Universal Good for Piper Cubs,
G-780-007 $19.50
helicopters & aircraft with deep tip tank
n Aluminum Weldable Outlet Flanges
Cessna 152 Gauge Precalibrated for standard
Fits Piper J3C-50, -50S, -65 (Army L-4, -4B, -4H, -4J, 13 gallon tanks (usable on 12 gallons). Great for
Navy NE-1,-2) -65S, PA-11, PA-11S , J3F-50 ,-50S ,-60, G-780-003 $10.50
flight schools, student pilots for working
-60S, -65 (Army L-4D), -65S, J3L, -S, -65 (Army L-4C), weight, balance, and fuel range problems.
E-480-100
-65S. Ideal for LSA and homebuilt aircraft. Code 4 E-480-000
Cessna 172 Gauge Precalibrated for standard
1/8” AN2 to AN5 Outlet E-398-000 $7.50 G-780-002 $12.50
21 gallon tanks (usable on 19 gallon tanks).
1/4” AN6 Outlet E-398-000 E-399-000 $8.25 Cessna 182 Gauge Precalibrated for standard 42 gallon long range
G-780-001 $10.50
3/8” AN8 Outlet E-400-000 $8.45 tanks (usable on 39 gallon tanks). For bladder tanks only.
1/2” AN10 Outlet E-401-000 $8.75 Cessna 172 with 26.5 gallon per tank. G-780-005 $10.50
3/4” AN12 Outlet E-402-000 $11.50 Cessna 182 with 43.5 gallon per tank. G-780-006 $12.50
n Metal Fuel Tank Bushing & Adapter The Original Fuel Stop
Drill 9/16” hole. Use Adapter Cat. No. E-480-100 1/8” NPT male and 1/4” NPT female. Code 8 Fits all standard straw fuel gauges
G -780-100 $6.95
and prevents gauge from ever
Bushing (Pictured Above) E-480-000 $8.95 slipping into the tank. Code 7
Adapter (Pictured Above) E-480-100 $2.65
n Vinyl Tubing
Ideal for fuel sight gauges, oil lines. Soft, pliable. Code 8
1/4” I.D. x 1/16” Wall M-566-000 per ft $.35
1/2” I.D. x 1/16” Wall M-566-100 per ft $.65
3/8” I.D. x 1/16” Wall M-566-200 per ft $.68 G-620-000
G-761-000
G-781-000 G-785-000 K-250-001
K-250-000
n Fuel Testers, Filters All Code 7
GATS Jar Fuel Tester Used to collect preflight inspection fuel
samples. It separates any co-mingled fuel and water, by allowing
G-781-000 $17.85
only the fuel to be poured back into the tank through our special
E-422-000
E-421-000 built-in filter which traps the water behind.
G-759-000
Fuel Sampler Cup Stainless steel pin, new crystal clear plastic material. G-620-000 $6.00
n Filler Neck & Gaskets
8” Fuel Tester P/N ASA-AFT1 G-761-000 $8.95
Cessna Style Outer diameter 2-1/4”, Inner 1-3/8” and 1/8” thick.
E-422-000 $3.95 6” Fuel Tester P/N 39IS G-785-000 $6.40
Heavy duty white nitrile rubber. MIL-R-25988. Code 5
Piper Style Outer diameter 3-3/8”, Inner 2-1/8” and 1/2” thick. Mr. Funnel Fuel Filter Filters out free water and solids down to .005 inch while you refuel. You can
E-421-000 $3.50 visually inspect your fuel supply for dirt and water that can cause microbial growth, corrosive acids,
Black. Not compatible with auto fuel. Code 8
electrolysis and rust. Works with gasoline, diesel, kerosene and mixed 2 cycle fuels. 10 year warranty.
Fuel Strainer Gasket Kit For late single engine Cessna Styles using
aluminum fuel strainer, P/N 0756005-1. Uses 1/4” pipe thread valve. G-759-000 $10.50 Small-6” H x 3-1/2” W with a flow rate of 2.5 GPM P/N F1C K-250-001 $17.75
Code 5 Large-10” H x 8-1/2” W with a flow rate of 5.0 GPM P/N F8C K-250-000 $34.45
40 | onlinecatalog.wagaero.com | 1.800.558.6868 | Prices and Supplies are subject to change without notice
conversion kits that require replacement of fuel gauges and wiring. All components are
thoroughly tested to ensure reliable operation.
Application Chart for Fuel Quantity Transmitters, Gaskets and Screw/Seal Assemblies for
Cessna Series 150, 152, 172, 175, 180, 182, 185. These units use hex head stainless steel
screws which do not require down pressure to tighten or loosen. Gaskets and screw/seal G-677-004
assemblies sold separately. Special viton rubber stat-o-seals are built into a stainless steel Screw/Seal
G-677-002
washer. Seals will not swell in AVGAS or degrade with time like the old cork seals. All Code 4 Assembly
CONTROLS
I-858-000 I-971-000
I-959-138
I-875-000
I-877-060
I-877-148
I-865-006 I-986-072
n Vernier Controls
Description Cat. No. Price
I-814-000 Engineered for precise adjustment. Push release button in center and push or pull control for
fast adjustment. For fine slow adjustment, knob turns left and right. Ideal for throttle, mixture,
n Throttles propeller control. Code 8
Description Cat. No. Price 48” L 10-32 Threaded End Black w/Silver I-971-000 $87.15
Throttle Cable Fits J-3 and other Piper Models (except J-5) 60” L 10-32 Threaded End Black w/Silver I-875-000 $89.75
requiring 54” in length. Includes clevis on carburetor end and Universal Vernier Mixture Control, FAA/PMA’d This control is applicable to many aircraft,
I-858-000 $134.00
a 90° bend at throttle arm. Usable on any aircraft with tandem including Cessna, Piper, Mooney, Maule and Stinson. Extra long. Trim to exact length. Replaces
seating where front & rear throttle is desired. FAA/PMA’d Code 4 Alcor P/N 93882. Code 4
Push-Pull Friction Lock Straight-wire type. Can be cut to any 72” Length Wire End P/N MC600-72 I-986-072 $207.50
I-814-000 $75.75
desired length. 60” L. .076 wire. Black knob. Code 8
n Control Cables
Dual Panel Mount Throttle Control by McFarlane
For ROTAX 912/914 engines and Homebuilts. Allows clean throttle installation without a Cable Controls with Threaded Ends For use with quadrants. Push-pull throttle cable housing
splitter box. Features a smooth friction lock, all metal construction, teflon liner, heavy .062” for dual cockpit. While Supply Lasts! Was $7.95! Code 6
stainless cables. Available in 6 ft. and 12 ft. lengths. Measured from panel fitting to end of SALE! Length 138” Thread 10-32 I-959-138 $2.50
conduit, cable extends 6” beyond conduit. Easily trimmed to length. Code 8 Cable Controls For use with quadrants with 10-32 threaded ends. Uses Cat. No.I-942-000
6’ ft. I-865-006 $177.05 Control End Clevis. Code 8
12’ ft. I-865-012 $183.85 60” 9 oz. I-877-060 $49.95
148” 2 lbs. I-877-148 $68.75
Push/Pull Wire .072 SS Push/Pull Wire. Code 8 I-830-000 per ft. $1.00
n Push-Pull Controls Push/Pull Conduit Code 8 I-830-100 per ft. $3.45
Description Cat. No. Price n Control Knob, Lock
Aluminum knob push-pull, .050 wire controls are adaptable to all Throttle Knob Fits J-3 Style & homebuilt applications.
light and homebuilt aircraft. Non-friction lock. Available with inserts Black plastic. 1-1/2” dia. 3/8”-16 thread. Code 8
as listed. 58” length. Code 8
I-958-000 $6.95
Carburetor Heat I-824-000 ea. $22.85
Throttle Lock Insure aircraft security with this heavy gauge,
Cabin Heat I-825-000 ea. $22.85 cadmium plated steel lock for most Cessna type push-pull throttles.
Starter I-823-000 ea. $22.85 Accepts shafts up to 3/8” dia. Padlock not included. Code 8
Mixture I-826-000 ea. $22.85 I-811-000 $15.50
Black Sheet For custom application of cowl seals and engine n Door Seals
I-339-000
baffles. 36” x 36” 3lbs. Code 8 3/4”
1/2” Hollow Quarter Round 8 H-790-000 per ft. $1.10
I-339-000 $198.85 1/4”
Hollow Quarter Round Door Seal Replaces Piper Style
Black Rivets Large flange used for Silicone Black Engine 1/2”
H-790-000
1/2”
OEM P/N 187-569 or Cessna 206, 210 & 310 Style OEM P/N
Baffle Material. Code 8 R860005
1/2”
I-911-104 pkg. 100 $6.95 H-976-000 8 H-976-000 per ft. $2.75
Gray Felt 1/8” Thick x 1-1/2” Wide. Code 5 Door Baggage Seal Replaces Piper Style
I-338-000 1-1/8”
I-338-000 per ft. $.65 OEM P/N 187-523, 187-524, 187-527 and 196-302
1/4”
7/16”
8 H-970-000 per ft. $1.95
n Cowling Chafe Seal
7/16” Cessna 150, 172, 180 &182 Style Door Seal
Description Cat. No. Price H-970-000
Cowling Chafe Seal Used where cowl sections overlap. Can H-977-000 8 H-977-000 per ft. $1.95
I-908-000
be used around inspection doors. Phenolic cure Nigen cord is Piper, Mooney, Rockwell Style
not affected by heat, cold or chemicals. Mfd. to MIL-C-5649. 1/4”
Code 5 8 H-791-000 per ft. $.99
1” x 15’ roll I-908-000 $14.85 3/4” Beechcraft Style
H-791-000
Silicone Black Cowl Chafe Seal Includes adhesive, a two-part 12 ft. roll 8 H-792-000 12 ft. $24.95
I-908-100 silicone catalyst to apply to surfaces. Made from AMS 3303
Solid Quarter Round Most aircraft adaptions.
Rev. G and meets MIL-I-45 208A. Code 5 1”
1/2”
Meets military specs
1/8”
1/16” thick x 1” wide x 15’ roll I-908-100 $43.50 1/2”
H-792-000
8 H-816-000 per ft. $.69
Cowl Seal All neoprene construction. Provides seal around
I-940-000 air intakes behind propeller and carb air boxes. Adaptable to 3/4” Door Seal Replaces Piper Style. OEM P/N 187-519
many other seal needs. 1-3/8”wide. Code 8 H-816-000
10 ft. roll 8 H-972-000 per ft. $17.50
Shipped in 9-ft. lengths I-940-000 $49.00 Cabin Window Vent Seal For Piper Aztec style and Cessna
5/8”
n Lacing Cord style OEM P/N R860031
1/4”
Koroseal Lacing Cord Ideal for cockpit lacing, tying wire H-971-000 3/8” 8 H-971-000 per ft. $1.42
bundles, etc. All the characteristics of rawhide. 5/32”x3/32”. H-972-000
I-961-000 n Wing Root Seals
The cord is a flat, rectangular shape. Code 4
1/8” Piper Wing Root Seal, Non-PMA’d 12’ roll adequate for one
100 ft. roll I-961-000 $46.50
wing root.
n Leading Edge Tapes 3/8”
Black Seal 8 H-793-000 $29.50
Eliminate dented and chipped leading edges. Also improves
White Seal 8 H-794-000 $12.95
airfoil and reduces ice accumulation. All Code 8 H-793-000
3/4”
H-794-000 Piper Wing Root Channel, 12 ft. roll, FAA/PMA’d
Black Tapes 10 mil 2” x 100’ I-200-000 $13.95 H-987-000
Replacement for PA-28, PA-32, PA-38, & PA-44 Models
3” x 100’ I-201-000 $21.45 (Kit for one wing). Replaces OEM P/N 65773-00,
3/4”
I-200-100 4” x 100’ I-200-100 $27.75 65773-000, 187-526, 65773-02, & 65773-002.
Made from superior compound which is softer than
6” x 100’ I-202-000 $36.35 3/4” the OEM for easier installation. Black.
1-3/8”
Clear Tapes 6 mil 2” x 100’ I-208-000 $14.35 4 H-987-000 $44.10
3” x 100’ I-208-100 $19.45 Beech Wing Root Seal 11 foot roll adequate for one wing
4” x 100’ I-208-300 $23.40 H-798-000 root. Black and manufactured to MIL-R-6855.
I-208-000
6” x 100’ I-208-200 $34.40 1/8” 5 H-798-000 $48.20
Prices and Supplies are subject to change without notice | 1.800.558.6868 | onlinecatalog.wagaero.com | 43
SEALS LATCHES
n Cessna, Piper, Mooney Door Seals
It conforms to the sealing
surfaces, forming a perfect
sealing bond between the
M-242-000
door and the fuselage. The
seal is 3/8” thick by 7/16”
wide and fits in the channels Description Code Cat. No. Price
around the door openings. Flush Door Fits Beech Sierra Sundowner Style. Locking
Includes a special 60-pound type. Includes striker. Fits standard 1-1/2” width door or has
pressure sealing adhesive. H-909-000 bushings that can be cut to fit narrower doors. P/N 1040-B.
New molded seal for Beech 8 M-242-000 $99.50
aircraft doors and windows
using a special hybrid rubber Cabin Door Latch
compound. The seals provide For Aeronca Models 7A, 7BCM, 7CCM, 7DC, 15AC and 7EC.
air tight as well as water tight doors and windows and greatly reduces the cabin noise level. Improved internal component construction with yellow
Seals come in complete kits and are available at a fraction of the cost of OEM seals. chromate for corrosion protection. Ideal for experimental
FAA/PMA’d certified for use on Beech, Cessna, Piper and Mooney (un-pressurized with use. OEM P/N 1-2594.
reciprocating engines). Requires only a log book entry. Call for Special Pricing. Code 4 M-738-000 4 H-909-000 $75.00
Cowl Latch
Replacement for most Pipers. Also usable on many
homebuilts. 4 required.
4 M-738-000 ea. $174.30
Lock & Key Set
Includes lock and two matching keys. Ideal for doors,
H-857-000 baggage compartment, glove box, many other applications.
8 H-857-000 $5.50
n Door Handle
Trim Crank Handle
Same type as used on J-3, J-5 and others.
H-815-001 8 H-815-001 $19.95
VENTS
H-965-000
Front Door Seal (1200 series) P301-23 H-967-002 $112.60 Description Cat. No. Price
Mooney Nonretractable Snap Vent Adjustable for intake of fresh air or
H-703-000 pr. $19.25
All MK 20 Series Vent Window 500-1003 H-960-002 $8.95 exhaust of cabin air. Made of transparent plastic. 2” dia. Code 8
Retractable Snap Vent Retracts to a closed position nearly flush
H-703-100 pr. $22.35
with the slip stream. 3-1/4” dia. Code 8
GRIPS Original PA-18, -20 & -22 Air Vent Can be installed inside
window, door skin or side skin. Operates easily and gives a
H-919-000 $79.95
Description Code Cat. No. Price
positive closure. 2-3/4” square with 1-1/2” square opening. Ideal
for homebuilts. Code 4
Black Stick Grips
Window Ventilator Plexiglass cabin ventilator. Mounts firmly at
1” to 1-1/8” I.D. four points. Closes tight for winter flying. Uses 2-1/2” dia. hole. H-833-000 $23.25
x 4-1/2”L Round 7 H-710-000 $3.95 Code 8
Softex Grip Kool Scoop Plexiglass cockpit ventilator. Fits Piper, Beechcraft,
1” I.D. x 4-1/2” L Mooney & most other low wing airplanes with a side vent window H-940-000 $34.20
7 H-832-000 $2.95
H-710-000 H-832-000 Ribbed Grip (left hand). For ground use only. 7” x 6” x 2”. Code 8
44 | onlinecatalog.wagaero.com | 1.800.558.6868 | Prices and Supplies are subject to change without notice
WINDSHIELDS
LP Aero's
Description OEM P/N Cat. No. Price
FAA/PMA’d Factory fresh, free from distortion. Manufacturer P/N
guarantees their windshields to be optically perfect and free PA-20 & PA-22 Flat 462 13432-00 M-219-077 $302.99
from defects.
SAMPLE LISTING BELOW, CALL FOR OTHER MODELS! PA-22 “Bubble Type” 463 13432-02, -03 M-219-078 $302.99
Please specify year, model and serial number of your aircraft PA-22 1953 & up “Bubble Type” 463 13432-02, -03 M-219-079 $302.99
when ordering. Many out-of-date aircraft have been modified PA-22 108 Colt “Bubble Type” 463 13432-02, -03 M-219-080 $302.99
and measurements included with the order will help alleviate
PA-24-180, 250, 260, S/N 24-1
any problems if your aircraft is not standard. Check or charge card number must accompany
to 24-4299, PA-24-400, LH 480 20677-10, -14
order. Orders are noncancellable and nonreturnable. Available in green, grey, UV solar green M-219-081 ea. $210.85
S/N 26-2 & up, PA-24-260, S/N RH 481 20677-09, -13
or UV solar grey tints. The UV solar green and UV solar grey have the same visible light
24-4300 & up. LH/RH
transmittance as the standard Green or Solar Grey. There is an additional charge for tinted
and/or UV windshields. Windshields requiring an Exporter Certificate of Airworthiness have PA-25 “PAWNEE” S/N 25-1 thru
485 61312-00 M-219-083 $168.33
an additional $86.00 charge per order. Prepayment is required and shipped FOB factory freight 25-655
collect. Items marked with a † are shipped truck. Code 4. 63070-15, -16,
PA-28 Cherokee 140-150-160 LH 490
LP Aero's -29, -30, -41, -42, M-219-084 ea. $170.69
Description OEM P/N Cat. No. Price LH or RH RH 491
P/N -45, -46
Aeronca 63070-15, -16,
LH 490
Champion 7AC, 7EC, 7GC, PA-28 Cherokee 180 LH/RH -29, -30, -41, -42, M-219-085 ea. $170.69
202 7-468 M-219-003† $630.79 RH 491
without cutouts -45, -46
Chief 11AC, 11CC, 11BC, 11ACS 205 7-521 M-219-004 $282.32 Stinson
Champion Citabria 7ECA, Voyager (Univair) 108, 108-1, -2, LH 552 LH 108-3002208-6
192 7-1264 M-219-005† $307.72 M-219-092 ea. $187.82
7GCAA, 7GCBC, 7KCAB, 8GCBC -3, -5, LH or RH RH 553 RH 108-3002208-7
Sedan 15AC LH/RH 203/204 7-852-2, -3 M-219-007† ea. $234.48 LH 556
10 & 10A, LH or RH M-219-090 ea. $154.74
RH 557
“TANDEM” L3 058-B 206 M-219-008† $249.83
LH 558
Cessna HW75-105, LH or RH M-219-091 ea. $212.63
RH 559
120-140, S/N 8800-15075 300 0411172-5 M-219-024 $307.72 Taylorcraft
140A 303 0411172-49 M-219-025 $300.63 BC-12D 650 1551 M-219-095† $281.14
150 1959 thru 1977, 043339-10; DC65, DF65, DL65, DC065, L2
S/N 17001 to 15067198, 0413419-200; 560 M-219-096† $293.54
303 M-219-026 $300.63 Series
S/N 15069309 to 15073658, 0413419-201,
S/N A1500001 to A1500342 -202, 203 n Cessna Windshield Upgrades FAA/PMA’d
170A, S/N 18729-20676 306 0510000-15 M-219-033† $318.94 Now replace your aircraft’s two-piece windshield with these one-piece windshields! Code 4
170B, S/N 20267 & Up 312 0510001-5 M-219-034† $330.16 Description OEM/PN Cat. No. Price
172 S/N 28000 thru 47746 Cessna 170A, S/N 18729-20676, 1950-1951; 170B
312 0510001-6 M-219-035† $330.16 S/N 20267 thru 27169, 1952-1955;
(1956-1963) 312CON M-219-134† $472.50
172/F-172 S/N 17250573- 172 S/N 28000-47746, 1956-1963; P-172 S/N
17272884 & F172-0019 345 0513230-12, -14 M-219-036† $423.48 57120-7188; F172 S/N 0001-0018
-F17201909 Cessna 180 S/N 30000-50355; 182 S/N 33000-
315CON M-219-140† $541.01
172 S/N-17247747 - 17249544 311 0513300-16 M-219-037† $408.12 51556: without compass mount
180, 1955-1958, S/N 31261- n Homebuilt Bubble Windshield, Preformed Frame
315 0713000-24, -53 M-219-040† $459.51
50355 AcroSport, Pitts & others. Measures 13-1/2” H x 24” W x 36-1/2” front tip to tip on curved side.
182, S/N 51557-53598 Code 8
316 0713100-10, -11 M-219-043† $459.51
(1959-1961) Green tint 122 M-219-098 $135.00
Ercoupe Flat Type 415C Series 350 415-31042 M-219-047 $193.73
Mooney M20 & M20A, S/N
1002-1700; M20B, S/N
1701B-1939B; M20C, S/N LH 100 LH 310054-001
M-219-056 ea. $152.97
1940C-2806C, except 2742; RH 101 RH 310054-002
M20D, S/N 101D-257D; M20E,
S/N 101E-469E, except 400
Luscombe 8A & 8E, Flush Type 400 081105-2 M-219-059 $239.20
Piper
Landing Light Lens
J-3, Wag-Aero Sport Trainer 450 10009-00 M-219-064 $176.60
J-4, 1939 A or B, 1940-41 452 00079-20 M-219-065† $248.65
n Skylights
J-3 and PA-11 Styles Clear Only. Repl. OEM Code 8 51141-00 M-547-000 $52.88
J-5 470 M-219-067† $268.73
Cessna 120, 140, 150, 152 Code 4 Replaces 0411144 M-547-300 $58.47
PA-11, Wag-Aero Super Sport 454 10673 M-219-068 $212.63
Aeronca 7ACA, 7GCBC, 7ECA, 7GCAA, 7KCAB Clear, P/N 288. Code 4
PA-12, Early Round Top 455 10212 M-219-069† $251.02
7-1286 M-220-127 $140.57
PA-12, Late Square Top 456 10680-00 M-219-070† $251.02
Aeronca 8GCBC, 8KCAB Green. P/N 288GT.Code 4 7-1286-2 712862 $168.33
PA-14 Family Cruiser (also fits
451 12248-00 M-219-099† $214.99
Sportsman 2+2) n Landing Light Lenses FAA/PMA’d Code 4
PA-15 459 11631 M-219-072 $302.99 Cessna 140A, 150, 170A, 170B, 172 and 175 P/N
0523115-5 B-200-000 $66.20
PA-16 459 11631 M-219-073 $302.99 373CL
PA-17, Wag-A-Bond 459 11631 M-219-074 $302.99 Cessna 180, 182, 205, 206, 207 and 210 P/N 381 0722100-4 B-200-100 $66.20
PA-18 “SUPER CUB” 95 hp 461 12248-00 M-219-075 $248.06 Piper PA-15, 16, 17, 18, 20 and 22 P/N 041 12532-00 M-544-000 $54.34
PA-18 “SUPER CUB” 108-125- Piper PA-24-260, PA-30 and 39 P/N 064 LH 20348-00 M-544-200 $60.24
464 12430-00 M-219-076 $248.06
135-150 P/N 065 RH 20348-01 M-544-300 $60.24
46 | onlinecatalog.wagaero.com | 1.800.558.6868 | Prices and Supplies are subject to change without notice
NOSE COWLS
M-149-000 M-073-000
M-047-000
M-075-000
All components are exact reproductions of original cowls and are fabricated by a professional fiberglass company.
Description Code Cat. No. Price
72CK
These wood propellers were original equipment on Piper, Aeronca, Taylorcraft, Ercoupe, early Cessnas, and
other classic aircraft. Metal tipping and high quality lacquer finish. Bolts and mounting plates not included. All I-962-000
models from Sensenich are available and popular models are in stock. 18 lbs. $15.00 handling fee. All Code 4
Aircraft Models Engine Standard Cruise Climb Price
Aeronca 7AC, 11AC, 11ACS Cont. A65 72CK-42 72CK-44 $2,179.00
Cessna 120, 140 Cont. C85 72GK-48 $2,846.00
Luscombe 8A Cont. A65 76CK-42 76CK-44 $2,941.00
I-807-000
Piper J-3, J-4A, PA-11, PA-17 Cont. A65/C65 72CK-42 72CK-44 72CK-40 $2,179.00 I-808-100
Visit us at wagaero.com
Standard Spinner w/Two Backplates I-842-000 $169.00
Spinner Only I-842-100 $92.50
for complete product listings Front Backplate, 3-1/4 I.D., 9-1/4” O.D. I-842-101 $46.00
Rear Backplate, 3” I.D., 10-1/2 O.D. I-842-102 $46.00
Prices and Supplies are subject to change without notice | 1.800.558.6868 | onlinecatalog.wagaero.com | 51
D-204-000 D-204-201
M-922-000
n Shock Cords
n Landing Gear Strut Seal by Granville These shock cords are made to rigid government specifications. All Code 5
FAA/STC for most popular aircraft. Landing gear strut Aircraft Type Model Size Part No. Req. Cat. No. Price
packing seals normally shrink with age and temperature.
Engineered hydraulic chemical additive leaves a Acrosport I 3/4” x 8” 1280HD* 4 M-222-004 $31.00
protective coating on the strut shaft, softens and allows 3/4” x 8” 1280HDCW* 4 M-222-104 $72.95
the seal to expand to normal size. All Code 4
II 13/16” x 8” 1380 4 M-222-007 $40.00
Description Cat. No. Price
Aero Commander 500A, B; 560F 9/16” x 4-1/2” 9044 4 M-222-002 $36.75
1 pint Container P/N ALS361 M-590-100 $111.89
560A, 680 9/16” x 4-1/2” 9044 8 M-222-002 $36.75
Single Strut Kit – 4 oz. #5 Kit M-598-001 $39.00
680F 9/16” x 4-1/2” 9044 2 M-222-002 $36.75
3-Strut Kit for Single Engine - 8 oz. #1 Kit M-598-002 $65.20
Aeronca 15AC, from S/N 330 & up 3/4” x 8” 1280 4 or 6 M-222-013 $46.00
J-2, J-3 S/N to 8227, J-5B
Piper 11/16” x 7-1/2” 1174 4 M-222-005 $38.44
before 1942
J-5 11/16” x 7-1/2” 1174 6 M-222-005 $38.44
J-3, S/N 8277 and up;
3/4” x 8” 1280HD* 4 M-222-004 $31.00
PA-11, 12, 14, 17, 18
3/4” x 8” 1280HDCW* 4 M-222-104 $72.95
PA-16, 18, 18-95, PA-18A,
5/8” x 8” 1080HD* 4 M-222-006 $35.00
20, 22, 25 (235-260)
5/8” x 8” 1080HDCW* 4 M-222-106 $72.99
PA-20 (1950-’51 model) 13/16” X 8” 1380 2 M-222-007 $40.00
PA-22-108 5/8” x 8” 1080 4 M-222-012 $42.00
PA-24, PA30 1/2” x 9-7/8” 8097 2 M-222-014 $22.50
Pitts S-1, S-1C, S-1S 13/16” x 8” 1380 4 M-222-007 $40.00
S-2 3/4” x 8” 1280HD* 4 M-222-004 $31.00
3/4” x 8” 1280HDCW* 4 M-222-104 $72.95
Stolp Starduster SA-100 5/8” x 8” 1080 4 M-222-012 $42.00
Stolp Starduster II SA-300 3/4” x 8” 1280 4 M-222-013 $46.00
Taylorcraft L-2 11/16” x 10-1/2” 11104 4 M-222-011 $61.85
n Cleveland Conversion Kits STC’D/FAA approved BC12D, BC12085, BC19 9/16” x 10” 9010HD* 4 M-222-009 $39.00
Convert to Cleveland Wheel & Brake systems using the kit for your
9/16” x 10” 9010HDCW* 4 M-222-109 $62.25
aircraft and eliminate costly repair of your old system. Kits include two
magnesium wheels, two brakes, and installation instructions. Other All Model B Series prior
9/16” x 9” 9090 4 M-222-010 $34.00
kits available upon request. to 1946
Description Part No. Code Cat. No. Price F-19, F-21 9/16” x 10” 9010HDX* 4 M-222-015 $39.35
Aeronca 7AC, 7BCM, 7CCM, 7DC, 7EC, 7FC, 7GC, 7GCA, 7GCB, 7HC, 7JC, 7KC Wag-Aero Kitplanes Sport Trainer 3/4” x 8” 1280HD* 4 M-222-004 $31.00
Standard discs 199-211 4 SAR-8 **$4,021.67 3/4” x 8” 1280HDCW* 4 M-222-104 $72.95
Piper Conversion Kits J-3, J-4, J-5, J-5C, PA-11, -12, -14, -15, -16, Sportsman 2+2 3/4” x 8” 1280HD* 4 M-222-004 $31.00
-17, -18, -20, PA-18-150, and PA-18A-150 Kit uses Piper 1-1/4" axles.
No modification required. Unbolt present Goodrich wheel and brake 3/4” x 8” 1280HDCW* 4 M-222-104 $72.95
assembly and install with new magnesium wheel, double puck brake. Wag-A-Bond 3/4” x 8” 1280HD* 4 M-222-004 $31.00
Fits 6.00x6, 7.00x6 or 8.00x6
*HD or HDX = Heavy Duty, CW* = Cold Weather 3/4” x 8” 1280HDCW* 4 M-222-104 $72.95
Standard discs (non
STC'd). Requires 199-71 8 D-291-960 **$3,913.17
Form 337 n Shock Absorber Cord | Fittings
Piper J-3, PA11, PA12, PA 14, PA 16, PA 18 & PA 20 Not for J-5 Prices per foot of material. Available in 50 ft. lengths or less. Fastener
1-1/4" STC Only Cleveland Wheel Brake Conversion
Material Code 5 Fasteners Code 8 Locking Rings Code 8
4 D-292-000 $123.15
Tensile Strength Cat. No. Price Cat. No. Price Cat. No. Price
Cessna 120, 140, 170, 172, 175, 180, and 182
1/4” M-316-006 ea. $.29
Chrome discs 199-46C 4 D-291-101 **$3,835.41
3/8” - 300 lbs. M-316-005 per ft. $1.95 M-316-008 ea. $1.40 M-316-009 ea. $.63
**Non-stock conversion kits are noncancelable and nonreturnable.
** SALE prices While Supply Lasts! 1/2” - 400 lbs. M-316-001 per ft. $3.25 M-316-002 ea. $2.30 M-316-003 ea. $.70
Locking Ring
**Price to be confirmed at time of order. 5/8” - 500 lbs. M-316-010 per ft. $6.10
54 | onlinecatalog.wagaero.com | 1.800.558.6868 | Prices and Supplies are subject to change without notice
RA066-06200 Metal RA066-03300 Metal RA066-04400 Metal RA066-10500 Fiber RA066-10600 Fiber RA066-10800 Fiber RA066-30026 Fiber RA066-11100 Fiber
D-289-009 D-289-006 D-289-007 D-289-004 D-289-001 D-289-003 D-289-011 D-289-002
$12.95 $11.80 $11.30 $7.10 $7.10 $9.05 $9.15 $7.10
Code 4 Code 4 Code 4 Code 4 Code 4 Code 4 Code 4 Code 4
#Req'd #Req'd #Req'd
Aircraft Make/Model Code Cat. No. Aircraft Make/Model Code Cat. No. Aircraft Make/Model Code Cat. No.
Per Wheel Per Wheel Per Wheel
AEROTEK 206, U206A, D, E & Turbo Cherokee/Archer PA-28-160, S/N 281761 & up
4 4 D-289-004
models Cherokee/Pathfinder PA-28-181
Pitts S-1, S-2A 4 2 D-289-001
207, T207 4 4 D-289-004 4 2 D-289-001
AIR TRACTOR
P210 (1984) 4 4 D-289-009 PA-28-236 4 2 D-289-004
AT-300 4 4 D-289-003
210C 4 2 D-289-002 PA-28R-180, PA-28-200 4 2 D-289-001
AT-302A, AT-400A 4 6 D-289-003
210, P210, T210, 210N, PA-28R-180
AT-302A, AT-400A AT-400, 4 4 D-289-004 4 2 D-289-004
4 12 D-289-003 P210N S/N 28R-7130006 & up
AT-402, AT-501, AT502,
303, T303 8 4 D-289-007 PA-28-200 S/N
AT-401 4 8 D-289-003 4 2 D-289-004
305A, B, C, D, E, F 8 4 D-289-004 28R-7135110 & up
AYRES CORP
310, 335 8 6 D-289-006 PA-28R-201T, 201,
Thrush, Turbo Thrush 4 8 D-289-003 4 2 D-289-004
PA-28RT-201,201T
Skymaster 336 8 2 D-289-001
BEECH Early PA-28-235 4 2 D-289-001
337, B, C, D, E, T337, B, C, D, E 8 4 D-289-004
Musketeer 4 2 D-289-004 Early PA-28R-180, 200 4 2 D-289-001
GRUMMAN
Sierra Sport Sndwr. B-19, Twin Comanche PA-30 4 4 D-289-009
2 D-289-004
C-23, 24R AA-1, A, B, AA-5, AA-5A,
4 2 D-289-004 Navajo B, PA31-300, 310,
AA-5B, Tiger, TR-2 4 6 D-289-006
Debonair CD-1 thru Navajo Turbo
4 2 D-289-002
CD-387 AG-CAT 4 2 D-289-001
Chieftain, PA-31-350 4 6 D-289-006
Debonair B-33 4 2 D-289-001 G-154 4 2 D-289-001
Cherokee/Six-260
35, 35R, A35, B35, C35, D35, E35, F35, G35, H35, Cougar 4 2 D-289-009 4 4 D-289-004
PA-32-260
J35, K35, M35, N35, P35, S35, 45 (YT-34), A45 MAULE PA-32-280, 300, PA-32R-300, PA-32RT-300T,
(T-34A, B-45), D45 (T-34B), D55, D55A, E55,
Jetasen/Rocket, Lunar/ PA-32-301T, PA-34-200, 200T, 220T, PA-44-
E55A, 58, 58P, 58TC, 60, A60, B60, 95, 95-55, 4 2 D-289-004
Rocket 180T, PA-46-301P
95-A55, 95-B55, 95-B55A, 95-B55B, 95-C55A,
95-C55, 56TC, A56TC, B95, B95A, D95A, E95 MOONEY 4 4 D-289-009
4 4 D-289-007 Most M20, A, B, D, E 4 2 D-289-002 PA-32-300 S/N 32-40000
4 4 D-289-004
thru7200029
BELL ANCA PIPER
PA-32R-300, 32RT-300 4 4 D-289-004
Citabria, Champ 4 2 D-289-001 J-3 Cub Use Cat. No. D-289-001 linings with Cleveland brakes.
PA-32RT-300T, PA-34-200,
Scout 4 1 D-289-001 Colt PA22-108 4 2 D-289-001 4 4 D-289-004
200T
Decathlon, Scout 8GCBC 4 2 D-289-001 Apache PA-23-150, 160 4 2 D-289-001 PA-38-285, 300, 375 4 4 D-289-003
Viking, Aries 250 4 2 D-289-004 Apache/Aztec PA-23-235,
4 4 D-289-001 PA-39 4 1 D-289-009
CESSNA 250 Series
PA-39, PA-39-1 & up 4 1 D-289-001
150A, B, C, D, E 4 2 D-289-001 PA-23-250 4 2 D-289-009
PA-44-180 4 4 D-289-004
150F, G, H, J, K, 152, F-152, Comanche PA-24-180,
4 2 D-289-004 4 2 D-289-001 TAYLORCRAFT
FA-152 250, 260
Pawnee C PA-25 4 2 D-289-001 Sportsman 100 4 2 D-289-004
150-K , 152, F152, FA152
4 2 D-289-011
w/McCauley brakes Cherokee/Cruiser PA-28-
4 2 D-289-001 n SETS OF 12 Brake Linings with Rivets
Skyhawk 172, Cardinal 177 4 2 D-289-004 140
Description Code Cat. No. Price
172RG, 172,R172, 177, F177-RG, 182, 182RG, PA-28-140 S/N 28-20521
4 2 D-289-004 D-289-001 in Sets of 12 4 D-289-101 $76.50
TR182R,180,185E206seriesw/McCauleybrakes & up
Cherokee PA-28-150 4 2 D-289-001 D-289-004 in Sets of 12 4 D-289-104 $76.50
4 2 D-289-011
Skywagon 180 4 4 D-289-004 Cherokee PA-28-150 S/ n Rivets
4 2 D-289-004
N28-1761 & up P/N PT-44 Flat head, 9-64
Skylane 182 H, J, K, L, M, N 4 2 D-289-004 8 D-000-290 ea. $.20
Cherokee Warrior Shank Size. 1/4” L x 5/16”
185A, B 4 2 D-289-001 4 2 D-289-004
PA-28-151 P/N PT-45 Flat head, 9-64
185C, D, E 4 2 D-289-004 8 D-000-289 ea. $.20
Cherokee/Warrior II Shank Size. 5/16”L x 5/16”
4 2 D-289-004
185 with crosswind gear 4 2 D-289-001 PA-28-161
n Drum-Style Brake Linings FAA Approved
AGWagon 4 4 D-289-004 Cherokee/Archer For Cleveland Drum Style
PA-28-180, 4 2 D-289-001 Brakes. Replaces brake
Stationair-6 205, 205A 4 2 D-289-001
S/N 1 thru 28-1760 lining on mechanical or
Stationair-6 205, 205A
4 4 D-289-001 Cherokee/Archer PA-28- hydraulic type brake. Fits
(S/N 205-0481 & up) 4 2 D-289-004
180, S/N 28-1761 & up 6.00x6 brakes. P/N 66-5D. 4 D-309-000 ea. $68.15
Prices and Supplies are subject to change without notice | 1.800.558.6868 | onlinecatalog.wagaero.com | 55
19. Outside Hub TW-74B 4 D-201-248 $20.00 FAA approved units Direct replacements. All Code 4
20. Lock Ring TW-73B 4 D-201-229 $52.00 Piper J-3, PA-11
D-206-000 D-206-000 $177.33
1-1/4” width.
21. Screw TW-A2 4 D-201-230 $1.00
22. Steering Arm Assembly TW-66B 4 D-201-231 $118.15 Piper PA-18 and 18A
D-312-000 $198.72
D-312-000 S/N 1707 & up, 1-1/4” width.
23. Shield TW-77B 4 D-201-232 $16.00
Taylorcraft BC12D 1-1/2”
24. Cam Plate TW-75B 4 D-201-233 $12.00 D-207-000 $203.55
width.
D-207-000
25. SALE! Bearing WAS $39.95 TW-A5 4 D-201-234 *$29.50 Aeronca 7AC, 7EC (7ECA,
26. SALE! Bracket WAS $169.95 TW-71B 4 D-201-235 *$119.95 7GCAA, 7GCBC Pre 1974) D-208-000 $191.50
27. Small Felt Seal TW-78B-1 4 D-201-236 $6.00 1-1/2" width.
D-208-000
TAILWHEELS by Maule
J-105
Standard Aircraft Winch Just hook cable to the tail tie down ring and press the button.
Moves aircraft up to 3,000 lbs. rolling weight. Floor mount. Includes 75’ of cable and 100’
of control cord with an automatic safety shut off. Cable speed is 30 ft. per minute. Floor
H-805-000 mount requires Wag-Aero Mounting Kit shown below. (Cat. No. AW-001).
Description Cat. No. Price
n Wheel Chocks Code 7
Standard Aircraft Winch AW-100 ¨ $462.50
Description Cat. No. Price
Heavy Duty Aircraft Winch Includes metal wind up drum, 100’
Mini Wheel Chocks Made from high-strength
of cable and 125’ of control cord. Moves aircraft up to 6,000
rubber. Set of two permanently connected by AW-200 ¨ $510.00
lbs. Floor mount requires Wag-Aero Mounting Kit shown below
nylon cord.
(Cat. No. AW-001).
H-805-000 pr. $11.50
Aircraft Winch Mounting Kit Everything you need to secure
Wood Wheel Chocks Heavy-duty wood AW-001 $64.00
the winch to the floor. For Wag-Aero’s winches above.
construction. Finished in bright safety yellow.
Conneced with 18” of braided nylon rope, 10”L x n Aircraft Jacks Code 7
3-1/4”H x 4-1/2”W.. Our aircraft jacks are the strongest in the industry for comparable size and weight
WC-10 $32.00 capabilities. They are constructed from welded steel square tubing and our recent redesign
allows for easy assembly and disassembly to reduce shipping costs. The three leg design
clears close tolerance gear doors, such as Bonanzas and Barons. All have a machined jack
WCN-15 4 Ton
point centering cap with casters, jack handle and positive locking collars. The applications
GS00104 below are only suggested applications, please check your wing height before ordering.
WC-10
Homebuilts and Mooney Jack
J-100 ¨ $382.00
Height 23”-36”, Cylinder Capacity**8,000 lbs
Available with
your aircraft “N” number or company name! Piper and Beech Jack and Other Light Twins and Singles
J-105 ¨ $376.00
Maximum six numbers, characters or spaces. Height 26”-45”, Cylinder Capacity**6,000 lbs
n Stands Code 7
Travel Chocks Powder coated aluminum. Uses
bungee cord to hold chocks in place. Landing Gear Axle Stand A great safety device. Protects against your J-550
Small Chocks 1.5” x 1.5” x 6” aircraft slipping off its jack while wheels are removed. Just slip over the
axle and put the nut back on. Solid steel construction, Wide “H” pattern
Yellow WC-T6-Y $19.95 base. Maximum gross aircraft weight 3500 lbs.
Blue WC-T6-B $19.95 Description Cat. No. Price
Red WC-T6-R $19.95 AS-100 ¨ $88.25
AS-100
Medium Chocks 2” x 2” x 8” Tail Stand Height 19”-35”. J-550 ¨ $220.00
Yellow WC-T8-Y $23.25 Engine Overhaul Stand Steel construction for engine storage and
Blue WC-T8-B $23.25 overhaul, this sturdy 3-legged stand will rest level on uneven floors.
Stand is predrilled for Continental C-65 thru O-520 and Lycoming 65
Red WC-T8-R $23.25 thru O-720 engines. Three casters included.
Large Chocks 3.5” x 3.5” x 8 M-320-000 ¨ $242.00
ES-105
Yellow WC-T10Y $31.50 Engine Overhaul Stand Casters
ES-105 $51.00 M-320-000
Red WC-T10R $31.50 Set of three ¨ Oversize shipping charges apply.
Prices and Supplies are subject to change without notice | 1.800.558.6868 | onlinecatalog.wagaero.com | 59
Piper clearance
DELUXE
Deluxe Beechcraft, spring loaded design that fits 1/4” tow pins on most
Beechcraft 28” 47” M-340-025 $83.41
Beechcraft Travel Air, Baron, Duke, Bonanza, Mentor and Debonair
Bellanca Fits most Viking models 28.5” 46.5” M-340-024 $90.57
Deluxe Cessna. Most twin & single Cessna with 5/8” lugs on nose gear
Cessna 26” 46.5” M-340-011 $79.90
strut, most 210’s
1-1/8” Axle. Fits Cessna 310, 337, 414, 421, Piper Comanche, Twin
Cessna/
Comanche, Apache Aztec, Navajo, Cheyenne and Seneca with twin fork 33” 56” M-340-020 $81.77
Piper
nose gear T-100 T-105 T-110
Ercoupe Ercoupe with dual fork nose gear and 7/8” axle cups 28” 46.5” M-340-014 $78.47
Cheetah Tiger, two piece spring loaded design, Selected as original These Universal Tow Bars Are Standard FBO
Grumman equipment for the American General. Fits most AA1 , AA5 series 26” 43” M-340-019 $84.50 Equipment! Fits Piper, Cessna, Beech, Mooney, Aero
and AGAC Tiger; Cirrus 20 and 22 Commander, and many others. Adjustable fork allows
you to extend the fork assembly from 3” to 10”. Extra
Mooney Fits most Mooney models 27” 41” M-340-022 $68.60 Long 7’6”. Code 7
Deluxe Piper. Fits Colt, Tri-pacer, Warrior, Archer, Tomahawk, Description Cat. No. Price
Piper 24” 42” M-340-018 $79.54
most fixed gear Cherokees, Aero Commander model 100 & Lark
Tow Bar w/Ring Hitch T-100 ¨ $275.00
Rockwell Commander, for most Rockwell 112/114 series, and Commander 114B 28.5” 46.5” M-340-021 $80.13
Cessna Universal One-Piece Tow Bar Overall Length:
RV-A Series RV-6A, RV-7A, RV-8A, RV-9A 26” 43” M-340-026 $79.00 71” Fits most Cessna Singles & Twins with 5/8”
Tailwheel Most aircraft with Scott 3000 series tailwheels 26” 45.5” M-340-012 $79.50 diameter attach fittings on nose strut. Beech Singles
and Twins with 1/4” attach fittings and Mooney, Alon,
n Replacement Parts for Wag-Aero Towbars Lear Jet, Lake & Twin Aero Commander. For use with
Towbar Pull Pins M-340-202 $2.00 tug, tractor, or by hand. Wt. 13 lbs. Code 7
Spring Fits our Cat. No. M-340-011, M-340-012, M-340-014, M-340-019, Clevis Pin Style Hitch T-105 ¨ $200.00
M-340-203 $2.00
M-340-020, M-340-021 and M-340-024 2” Ball Style Hitch T-105-2 ¨ $230.00
Spring Fits our Cat. No. M-340-023, M-340-025 and M-340-026 M-340-204 $2.00 Piper Universal One-Piece Tow Bar Overall Length:
71” Fits Piper Malibu, Seminole, Arrow, Lance and
Beech Tow Pins These tow pins attach to the nose gear on your
M-340-200 $33.95 Seneca models with single fork nose gear. For use
Bonanza, Baron or Duke. Fits early model Beech Bonanzas (35 up to M35) Code 4 M-340-200
with tug, tractor, or by hand. Wt. 13 lbs. Code 7
For later models Beech Bonanzas (N35 up to B36TC) & all Barons & Dukes M-340-201 $28.60 Clevis Pin Style Hitch T-110 ¨ $191.50
2” Ball Style Hitch T-110-1 ¨ $192.50
¨ Oversize shipping charges apply.
60 | onlinecatalog.wagaero.com | 1.800.558.6868 | Prices and Supplies are subject to change without notice
M-231-000
4884
E-600-024
Aircraft Type/Model OEM P/N Code Cat. No. Price Aircraft Type/Model OEM P/N Code Cat. No. Price
Aeronca, FAA/PMA’d Piper, FAA/PMA’d
FAA/PMA’d 7AC, 7B, 7BCM, 7DC, 11A, PA-17 Use with Cont. A-65-8 or A-65-8F engines 4 M-231-000 ¨ $650.00
4-585 4 4585 ¨ $675.00
11B, Use with 65, 75 & 85 hp engines PA-18 Use with 105, 135 & 150 hp.
12351-15 4 M-235-000 ¨ $840.00
Champion, FAA/PMA’d engines
7EC, 7FC Use with 90-100 hp engines 4-884 4 4884 ¨ $745.00 Sport Trainer
Cessna, Non-TSO’d/PMA’d Use with Cont. engines. Has 7/16”
SALE! WAS $399.50 bolt hole and requires our Cat. No. 8 M-093-100 ¨ $615.00
Surplus – 185 Landplane only I-907-300 bushings
1963-73 S/N 185-0001 – 185-1149 0751003-30 6 E-600-024 ¨ $100.00
260 hp, S/N 185-0968 & up 300 hp,
1974-76 S/N 185-2311 & up
BUSHINGS
M-227-100
I-982-001
I-907-300
M-525-000
M-235-001
LORD MOUNTS
All Code 4
Aircraft Model Engine Application No. Req. P/N Cat. No. Price
Beechcraft
19 Lyc. O-320-E2C 4 J-7402-16 I-955-003 $139.50
B19, M19A Lyc. O-320-E2D 4 J-7402-16 I-955-003 $139.50
23 Lyc. O-360-A4G 4 J-7402-16 I-955-003 $139.50
C-23 Lyc. O-360-A4K 4 J-7402-16 I-955-003 $139.50
65, A65, 70 Lyc. IGSO-480-AIE6 4 J-6545-1 I-955-006 $150.45 I-955-010
76TC Lyc. TO-360-CIA6D 2 J-9613-49 I-955-005 $211.75
77 Lyc.O-235-L2C 4 J-7402-1 I-955-009 $139.50 I-955-006
Bellanca Mooney
7KCA Franklin 2A-120A, B 8 J-3608-1 I-955-010 $25.00 M20A (1958-1960) Lyc. O-360 4 J-7402-16 I-955-003 $139.50
Cessna M20B(S/N1701-1939) Lyc. O-360-A1D 4 J-7402-1 I-955-009 $139.50
120-140 Cont. C-85 8 J-3608-1 I-955-010 $25.00 M20C
Lyc. O-360-A1D 4 J-7402-1 I-955-009 $139.50
140A Cont. C-90 8 J-3608-1 I-955-010 $25.00 (S/N1940-20-1258)
150, 150A-L Cont. O-200-A 8 J-3608-1 I-955-010 $25.00 M20D (S/N101-260) Lyc.O-360-A2D 4 J-7402-1 I-955-009 $139.50
152, 152 Aerobatic Lyc. O-235-L2C 4 J-7402-1 I-955-009 $139.50 M20E (S/N101-470) Lyc. O-360-A1A 4 J-7402-16 I-955-003 $139.50
172 I-P Lyc. O-320-E2D 4 J-9613-49 I-955-005 $211.75 M20G (1968-70) Lyc. O-360-A1D 4 J-7402-1 I-955-009 $139.50
172 Lyc. O-320-D2J 4 J-9613-49 I-955-005 $211.75 Piper
172N Lyc. O-320-H2AD 4 J-9613-49 I-955-005 $211.75 PA-23-235 Lyc. IO-540-B1A5 8 J-3804-20 I-955-002 $204.75
175 Cont. GO-300-A 4 J-6545-1 I-955-006 $150.45 Lyc. O-540-A1B5,
PA-23-250 8 J-3804-20 I-955-002 $204.75
175A, B Cont. GO-300-C, D 4 J-6545-1 I-955-006 $150.45 A1D5
175C Cont. GO-300-E 4 J-6545-1 I-955-006 $150.45 Lyc. IO-540-C1B5,
PA-23-250 (6) 8 J-3804-20 I-955-002 $204.75
A1D5
177A Lyc. O-360-A2F 4 J-9613-49 I-955-005 $211.75
Lyc. O-540-C1B5,
177B Lyc. O-360-A1F6D 4 J-9613-49 I-955-005 $211.75 PA-24-250 4 J-3804-20 I-955-002 $204.75
A1A
180 Cont. O-470-K 4 J-6545-1 I-955-006 $150.45
Lyc. IO-540-E4A5,
180 A-H Cont. 0-470-K, R 4 J-6545-1 I-955-006 $150.45 PA-24-260 4 J-3804-20 I-955-002 $204.75
D4A5
180H, J Cont. O-470-R, U 4 J-6545-1 I-955-006 $150.45
Lyc. O-540-B2C5,
182, 182A-R Cont. O-470-R, U 4 J-6545-1 I-955-006 $150.45 PA-25-235 4 J-3804-20 I-955-002 $204.75
B2B5
185, 185A-E Cont. IO-470-F 4 J-6545-1 I-955-006 $150.45 PA-25-260 Lyc. O-540-E4 4 J-3804-20 I-955-002 $204.75
185, A185F Cont. IO-520-D 4 J-6545-1 I-955-006 $150.45 PA-28-140 Lyc. O-320-E2A 4 J-7402-16 I-955-003 $139.50
188 Cont. O-470-R 4 J-6545-1 I-955-006 $150.45
PA-28-150 Lyc. O-320-A2B 4 J-7402-16 I-955-003 $139.50
188 Cont. IO-520-D 4 J-6545-1 I-955-006 $150.45
PA-28-150 Lyc. O-320-E2A 4 J-7402-16 I-955-003 $139.50
205, 205A Cont. O-360-B4A 4 J-6545-1 I-955-006 $150.45
Lyc. O-320-A2B,
210, 210A-C Cont. IO-470-E, S 4 J-6545-1 I-955-006 $150.45 PA-28-150 4 J-7402-24 I-955-011 $161.37
E2A
310B Cont. O-470-M 8 J-6545-1 I-955-006 $150.45 PA-28-160 Lyc. O-320-B2B 4 J-7402-16 I-955-003 $139.50
Grumman American
Lyc. O-320-B2B,
AA-1C (Tomcat) Lyc. O-235-L2C 4 J-7402-24 I-955-011 $161.37 PA-28-160 4 J-7402-24 I-955-011 $161.37
D4A
AA-1C (Lynx) Lyc. O-235-L2C 4 J-7402-24 I-955-011 $161.37 PA-28-235 Lyc. O-540-B2B5 4 J-3804-20 I-955-002 $204.75
AA-5 Lyc. O-320-32G 4 J-7402-24 I-955-011 $161.37 Lyc. O-360-A2A,
AA-5A Lyc. O-320-32G 4 J-7402-24 I-955-011 $161.37 PA-28-180 4 J-7402-24 I-955-011 $161.37
A3A, A4A
AA-5B (S/N 1-399) Lyc. O-360-A4K 4 J-9613-49 I-955-005 $211.75 PA-38-112 Lyc. O-235L2C 4 J-7402-16 I-955-003 $139.50
Prices and Supplies are subject to change without notice | 1.800.558.6868 | onlinecatalog.wagaero.com | 63
FAA Approved
Repair Station
#A14R244N
A-980-076
Cessna
182
A-980-093
A-980-069
A-980-059
Piper
PA-28-151,-161
A-980-069
Cessna
A-980-046 C-172
Luscombe
*Note that there is important information regarding the A.D. on this engine mount. Please call in advance to be sure that we can repair your mount.
66 | onlinecatalog.wagaero.com | 1.800.558.6868 | Prices and Supplies are subject to change without notice
Before shipping, please disassemble all components where applicable (i.e. shrouds, stacks, risers, clamps removed from mufflers).
Ship your defective units to Aero Fabricators, 1216 North Rd., Burlington, WI 53105 for immediate repair. Quick turnaround, call 1-800-558-
6868. When shipping, include full name and address, telephone number and complete instructions for repair and return.
Aircraft Models OEM P/N Cat. No. Price Aircraft Models OEM P/N Cat. No. Price
A1A Husky A1A 35650-2 A-728-000 $499.50 Cessna 170, pancake style 055290 A-401-001 $450.00
Aero 112, 112A A-705-000 $414.00 170, pancake style 055290-1 A-401-002 $450.00
Commander Lark, Elano style A-710-000 $414.00 170, cylinder style, all other part numbers A-401-003 $450.00
Lark, Hanlon-Wilson style A-711-000 $414.00 170/172 0550157-9, -32 A-404-000 $350.00
Dart A-712-000 $414.00 172RG, all serial numbers 0750130-44 A-413-000 $350.00
Aeronca 7AC, 11AC, Hanlon-Wilson style, 172/175 w/pins 0550176-43, -52 A-405-001 $375.00
A-707-000 $382.00
Citabria w/2 inlets, 1 outlet 180 S/N30000-32150
0750290-3 A-410-000 $299.00
Champion 7GC, 7KC (complies w/A.D.) (This system has two muffler units)
A-714-000 $382.00
Citabria w/1 inlet, 1 outlet 180 S/N32151-182
0750130-12 A-412-000 $350.00
Citabria 7ECA A-718-000 $350.00 S/N 55058
Avcon A-727-000 $350.00 182 floatplane S/N55059 & up, 185 0750161-28 A-414-000 $350.00
Beech Musketeer 169-950012-45 A-500-000 $350.00 188 AGwagon 1650005-4 A-420-000 $350.00
Musketeer 169-950014-21 A-501-000 $350.00 R310 0852597-1 A-423-000 $450.00
Musketeer 169-95001-3 A-502-000 $350.00 337 Muffler rear 1555001-1 A-416-002 $795.00
23 Sundowner 099001-117 A-512-000 $350.00 Ercoupe A-704-000 $299.00
Beech 77 099001-064 A-516-000 $350.00 Grumman Yankee, Trainer, Cheetah, Tiger, Traveler,
A-716-000 $446.00
099001-126, American etc. all series
Beech B19, C23, C-24R A-517-000 $350.00 Mooney M20E, M20F studded A-600-000 $525.00
127, 131
33/35, A-G, 8003-9, 16 A-505-000 $299.00 M20G ribbed 630060-001 A-602-000 $525.00
33/35, A-G, 186 LH A-506-001 $299.00 M20C, 1965-66 studded A-604-000 $525.00
33/35, A-G, 189 RH A-506-002 $299.00 M20E studded A-605-000 $525.00
701-3, 4, 19, M20F ribbed 630045-503 A-606-000 $525.00
V-35 smooth A-507-001 $299.00
20, 21 Ribbed expanded conn. 630060-501 A-607-000 $525.00
701-3, 4, 19, M201 A-609-000 $495.00
V-35 w/pins A-507-002 $299.00
20, 21
Navion A-708-000 $350.00
35 H-P LH 492-7 A-508-001 $299.00
Piper PA-12, 14, 16, 20, 22, 25 10308-03 A-304-000 $299.00
35 H-P RH 492-27 A-508-002 $299.00
PA-28 -150, 151, 160, 161, 180, 181 66894-00 A-310-000 $299.00
Bellanca Viking, Cruisair A-706-000 $350.00
Scout 8GCBC A-719-000 $408.00 PA-28-140, 180 99482-00 A-308-000 $299.00
17-31A, LH 191485-30 A-723-001 $345.00 PA-28R-180, R200, RT201, 236,
67517-00 A-318-000 $299.00
PA32-300, R-360
17-31A, RH 191485-10 A-723-002 $345.00
PA-38-112 77669-02 A-331-000 $299.00
17-31ATC, RH 191672-0 A-725-000 $350.00
PA-44-180 86299-07 A-326-000 $299.00
Cessna 150 0450400-3 A-402-001 $299.00
J-3 71053-01 A-301-000 $318.00
150 0450400-4 A-402-002 $299.00
150 0450338-63 A-403-001 $299.00 PA-11 muffler/stack assy 10757-00 A-302-000 $407.50
150 0450338-62 A-403-002 $299.00 PA-15, 17 & 18, C-90 powered muffler/stack assy A-303-000 $442.00
172, 177 w/Lyc. engine 1754001-8 A-408-000 $299.00 PA-18-105, 125, 135 & 150
12433-14 A-306-000 $337.50
(includes new bale assy. as per A.D.)
172 w/Lyc. engine 1754001-15 A-408-001 $299.00
PA-24-180 24506-00 A-312-100 $350.00
172 w/Lyc. eng. w/o liner 1754001-22, 23 A-408-002 $299.00
R172w/Cont. engine 1455009-3 A-409-000 $299.00 PA-24-250 23159-00 A-312-000 $350.00
172 w/Cont. engine 0550176-59 A-406-000 $299.00 PA-24-260A 26873-00 A-315-000 $350.00
172, 175 w/Cont. engine smooth PA-24-260B LH 26345-05 A-316-001 $350.00
0550176-44 A-405-002 $299.00
shell PA-24-260B RH 26345-06 A-316-002 $350.00
206, 207 1250250-5 A-415-001 $299.00 PA-24-250 LH 26345-06 A-320-001 $350.00
206, RG182 1250251-16 A-415-002 $299.00 PA-24-250 RH 26345-05 A-320-002 $350.00
206 1250251-13 A-415-102 $299.00
PA-25-235 & 260 753-755 A-314-000 $450.00
210 Early Model LH 1250200-3 A-417-001 $299.00
PA-28-235 65419-00 A-313-000 $383.00
210 Early Model RH 1250201-5 A-417-002 $299.00
PA-32-260 68718-00 A-322-000 $366.95
337 Front 1250250-5 A-416-001 $299.00
PA-32-300 68796-00 A-323-000 $366.95
120 & 140, pancake style 0550290 A-400-001 $399.75
120 & 140, pancake style 0550290-1 A-400-002 $399.75 PA-34-200 78463-10, 18 A-324-000 $366.95
152 EL099001-176 A-421-000 $450.00 Swift Hanlon-Wilson style A-709-000 $350.00
152 1-1000-34 A-422-000 $450.00 Varga A-720-000 $263.00
Prices and Supplies are subject to change without notice | 1.800.558.6868 | onlinecatalog.wagaero.com | 67
E-302-001
7485SS
E-334-000
E-302-002
E-310-000
7486SS
E-394-000
E-303-002
E-328-000
E-331-002
E-303-001
E-505-001
Cessna 170, 170B, 172 & 172A Systems All models using Cont. C-145 and O-300. E-420-000 E-428-000
Muffler Only LH & RH on 170 & 170B,
0550157-9 E-505-001 $573.00
S/N 20267 thru 25372 n Cessna Tailpipe Extensions All Code 4
RH and 170 &170B, S/N 25373 and up 0550157-32 E-505-002 $573.00 Description OEM P/Ns Cat. No. Price
Stack, Front - LH/RH 0550157-8 E-505-005 $175.00 Cessna 150, 170 and Early Model 172 Extends 2” 0450338-66
Set of 2
Stack, Center/Rear - LH/RH 0550157-7 E-505-006 $86.65 past original tailpipe. 2”O.D. stainless steel. Bolt- 0550157-3 E-420-000
$209.45
on. End cowling smudges. Reduce cabin noise. 055015733
Stack Clamp Collar 0550157-51 E-505-007 $53.00
Cessna 177, 180, 182 Diameter 3”, length 6”.
Cessna 172B, C, D, E, F, G & H Muffler Hardware and instructions. Also fits one-muffler E-428-000 ea. $99.00
LH/RH Muffler 0550176-59 E-506-001 $522.00 system Cessna 185s. Stainless steel. Bolt-on.
¨ Oversize shipping charges apply.
70 | onlinecatalog.wagaero.com | 1.800.558.6868 | Prices and Supplies are subject to change without notice
E-365-001
E-499-001
E-366-001
E-362-000
E-486-000
E-347-000
E-499-002
E-499-000
E-347-001
Replaces Replaces
Description #Req’d Code Cat. No. Price Description #Req’d Code Cat. No. Price
OEM P/N OEM P/N
Full System J-3, A-65 Includes all component parts listed below plus the PMA’d header stacks. PA-18 Super Cub SALE Prices! While Supply Lasts!
Fits all J-3, Wag-Aero Sport Trainer, and homebuilts using A-65, A75, C85-8 and C90-8 engines 12433-014,
without accessories. Uses treated aluminized Mild steel stacks, including clamps. Muffler 4 E-362-000 $650.00
015
4 E-486-000 $1,685.00 Stacks - 125, 135 & 150 hp
12457-13 4 E-366-000 $947.39
J-3 Style Exhaust System O-200 8 E-486-200 $1,650.00 Rear
J-3 Style Exhaust System C-85, Muffler Shroud 150 hp 12436-10 4 E-368-000 ea. $492.13
8 E-486-085 $1,650.00
C-90-12 Tailpipe Clamp 72691-00 1 4 E-347-000 ea. $35.50
J-3 Exhaust Stacks Replica of original without accessories and made with 321 stainless steel. Muffler Clamp, with pin 70591-02 2 4 E-346-000 ea. $36.50
65 hp only.
PA-18 Stacks For Lycoming O290 and O320 Engines made of stainless steel.
Both Stacks 4 E-463-000 pr. $1,016.50
Front 12457-12 4 E-365-001 $564.70
LH 71082-00 4 E-463-001 $535.00
Rear 12457-13 4 E-366-001 $635.29
RH 70671-00 4 E-463-002 $535.00
PA-22 Tri-Pacer & Colt - PA-22 system also suitable for use on Lycoming powered homebuilts
J-3 Individual Components 108 hp thru 150 hp.
J-3 Muffler only (no shroud) 71053-02 4 E-311-000 $545.00 Muffler 10308-00 4 E-352-000 $650.00
Stacks made of Mild Steel and Aluminized. Tailpipe 11417-02 4 E-360-000 $220.00
LH 71082-00 4 E-456-001 $289.50 Rear Stack 12043-22 4 E-360-001 $582.35
RH 70671-00 4 E-456-002 $289.50 Front Stack 12043-23 4 E-360-002 $582.35
Tailpipe Rear Stack w/shroud 13238-05 4 E-360-003 $817.65
74501-00 4 E-312-000 $239.75
(This tailpipe will not fit J-4s)
Tailpipe Clamp 72691-00 1 4 E-347-000 ea. $35.50
Tailpipe Shroud 70912-00 4 E-313-000 $159.00
Muffler Clamp with pin 70591-02 2 4 E-346-000 ea. $36.50
Muffler Shroud 70963-00 4 E-330-000 $330.00
PA-24-250 Comanche
Muffler Clamp with pin,
70591-02 2 4 E-346-000 ea. $36.50 Replacement Tailpipe 21580-00 4 E-560-000 $135.00
2-1/8” diameter
Tailpipe Clamp 72691-00 4 E-347-000 ea. $35.50 Muffler Clamp 2-3/4" diameter 14235-08 2 4 E-561-000 ea. $49.50
J-3 Exhaust Support Bracket 70581-00 4 E-347-001 $39.50
J-3 Style Tailpipe Shroud Clamp (not included in Cat.
8 E-347-002 $33.50
No. E-486-000 system)
J-3 A-65 Header Stacks Exhaust stacks built to exact dimensions of J-3 header pipes of mild E-456-002
steel with long-life hot aluminized finish. Ideal for homebuilts! E-360-000
Both Stacks 4 E-456-000 pr. $525.00
E-456-001
LH 71082-00 4 E-456-001 $289.50
RH 70671-00 4 E-456-002 $289.50
J-3 Style O-200 Only Header Stacks
Both Stacks 8 E-499-000 pr. $475.00 E-352-000
RH 8 E-499-002 $247.00
J-3 Style C85/C90-12 Exhaust Stacks Are for engines without a generator
Both Stacks 8 E-499-100 pr. $462.60
LH 8 E-499-101 $257.00
E-561-000
RH 8 E-499-102 $257.00
E-360-002
PA-12, 14, 16, 20, 22, PA-22-135 & PA-22-150
Muffler 10308-00 4 E-352-000 $650.00
E-360-001
Muffler Shroud PA-12 & 14 10431-00 4 E-356-000 $524.91
Muffler Shroud Clip 10430-00 4 E-356-100 $66.50 E-560-000
FLEXIBLE DUCTING
n Aeroduct Cat Black n Aeroduct Scat Red n Aeroduct SCEET Red n Stainless Steel
For cabin, carburetor heat, and For cabin, carburetor heat & Approved for temperature For extreme high temperature
fresh air pipes Approved up to fresh airpipes. Withstands range-80° to +600°F. Code 5 application or for long term use. Code 8
E-479-000
350°F. Odorless. Code 5 temperatures 65°to 450°. Code 5
I.D. Cat. No. Per Ft. I.D. Cat. No. Per Ft. I.D. Cat. No. Per Ft. I.D. Cat. No. Per Ft.
1” E-336-000 $10.00 1” E-575-000 $7.65 1” E-348-000 $10.00 1-5/8” E-479-000 $.50
1-1/2” E-337-000 $12.00 1-1/2” E-576-000 $8.50 1-1/2” E-349-000 $10.25
2-1/4” E-307-000 $15.00 2” E-577-000 $9.75 2” E-350-000 $13.50 E-341-000
➞
Black H-617-001 H-617-101
Typical Installation
Navy H-617-002 H-617-102 for Cessna Aircraft
Brown H-617-003 H-617-103 Spar ➞
➞
Spar
Royal Blue H-617-004 H-617-104 AN4-6ABolt
➞
Red H-617-006 H-617-106 MS20365 Nut AN960-416 Washer
series “Y” type shoulder harness with metal to metal hardware. n Adjustable Crotch Strap
Hardware not included. Retain your own aircraft fittings. Code 4
Black H-858-001 set $155.00
Color Code Cat. No. Price
Seat Belt, Harness
Black 8 H-825-000 $47.75
Navy
Brown
H-858-002 set $155.00
H-858-003 set $155.00 Olive 8 H-825-100 $47.75 Refurbishing
Silver 8 H-825-300 $47.75 Certified Repair Station #A14R244N
Royal Blue H-858-004 set $155.00
Red 8 H-825-400 $47.75
All Repairs FAA Approved Code 4
Red H-858-006 set $155.00
Tan H-858-007 set $155.00 Royal Blue 8 H-825-500 $47.75
Olive H-858-008 set $155.00 Brown 8 H-825-700 $47.75 We Make Safety Affordable Call 1-800-558-6868
Silver H-858-009 set $155.00 Navy 8 H-825-800 $47.75 Send your defective belts (include TSO tags)
and all hardware to: AERO FABRICATORS,
Tan 8 H-825-900 $47.75
1216 North Road, Burlington, WI 53105
n Pads If your civilian or military aircraft is equipped with a
3” Lap Restraint Pads unique belt or harness, Aero Fabricators can replace
H-830-000 H-823-000 H-831-000 H-706-000 8 H-827-000 pr. $19.95 the webbing at a fraction of the cost of purchasing
(Black)
n End Fittings All Code 8 new. We encase your TSO tags in a plasticized cover
2” Shoulder
for protection, and recertify your unit. We are fully FAA
3-Bar Slide H-830-000 $9.90 G-Restraint Pads 8 H-826-000 pr. $27.75 approved and carry a complete selection of colors in 2”
Quick Disconnect Fitting H-823-000 $27.50 (Black)
and 3” widths. An $86.00 Certificate of Airworthiness
Triangular End Fitting H-831-000 $12.00 n Seat Belt Webbing (C of A) charge on seat belt repairs if required.
2” Chrome Seat Belt Tip Ends H-706-000 $3.75 Minimum order 5 yards. Code 5
Color 2” Webbing 3” Webbing Please Note: We cannot repair belts exceeding 1,500 lbs.
n 2” Seat Belt Extensions The FAA Requires readable TSO tags on all seat belts!
Mates with Wag-Aero’s seat belts only. 24” long. Code 8 $10.50 per yd. $12.50 per yd.
Repairs For: Estimated Repair Cost
Black H-705-001 ea. $47.25 Black RM00100 RM00020
2” Seat Belt (complete lap assembly) $59.00
Navy H-705-002 ea. $47.25 Navy RM00110 RM00080
3” Seat Belt (complete lap assembly) $105.00
Brown H-705-003 ea. $47.25 Brown RM00120 RM00070
Single Shoulder Harness $59.00
Royal Blue H-705-004 ea. $47.25 Royal Blue RM00130 RM00060
“Y” Shoulder Harness $73.50
Red H-705-006 ea. $47.25 Red RM00150 RM00050
“H” Series Shoulder Harness $73.50
Tan H-705-007 ea. $47.25 Tan RM00160 RM00090
“Y” Shoulder Harness Set w/ 3” Lap Belt $164.00
Olive H-705-008 ea. $47.25 Olive RM00170 RM00030
Military 3” Lap Belt $111.00
Silver H-705-009 ea. $47.25 Silver RM00180 RM00040
74 | onlinecatalog.wagaero.com |1.800.558.6868 Prices and Supplies are subject to change without notice
wagaero.com
Silicone Heat Sink Compound
K-455-000 Use for a more accurate transfer 7 K-455-000 $15.80
during iron calibration.
Prices and Supplies are subject to change without notice | 1.800.558.6868 | onlinecatalog.wagaero.com | 79
LOCTITE
Small Screw Threadlocker, 222 Violet Low-strength
adhesive for locking fasteners 1/4” and smaller. Hand tool easy
ways to
removable. Set time 20 mins.
10ml (.34 oz) 7 K-421-000 $20.45
Removable Threadlocker, 242 Blue General-purpose,
medium-strength adhesive for use with fasteners 1/4”
and larger. Set time 10 minutes.
order!
10ml (.34 oz) 7 K-422-000 $22.00
K-422-000 K-421-000 High-Strength Threadlocker, 271 Red High-strength n www.wagaero.com
adhesive for locking all fasteners up to 1” in diameter. n 24-Hour Order Line 1.800.558.6868
Used when permanent adhesion is desired. n 24-Hour Fax 1.262.763.7595
10 ml (.34 oz) 7 K-423-000 $19.65 n Customer service 1.262.763.9586
Cylinder Bonding Threadlocker, 648 Green High n E-Mail: wagaero-sales@wagaero.com
temperature resistance. Ideal for retention of parts with a n onlinecatalog.wagaero.com
clearance or interference fit.
K-423-000 K-435-000
10 ml (.34 oz) 7 K-435-000 $24.00
80 | onlinecatalog.wagaero.com | 1.800.558.6868 | Prices and Supplies are subject to change without notice
SPORT TRAINER
Fits Light-Sport Aircraft Category n Flight Control Kit Code 8
** Call for pricing and availability Description Cat. No. Price
n Fuel System Kit Options Code 8 Rudder pedals, stick/socket assembly, control stick connector, control stick grips, torque tube,
Description Cat. No. Price push-pull tube, elevator bellcrank, cables, pulleys, turnbuckles, thimbles. Includes materials to
FUSEL AG E FU EL S YS TEM FA BRIC ATED KIT 13 gal. fuselage tank, gas tank float, fuel connect ailerons, elevators, stabilizers and rudder for the Sport Trainer, Super Sport Model or
shut off valve, filler neck gasket, gas tank straps, drain fittings, materials for the basic Sport Acro Trainer Model.
Trainer fuel system. Does not include fuel lines and fittings. Controls Kit Q-011-000 $1,871.89
Q-013-000 ¨ ** n Landing Gear Kit Options Code 8
WING TANK FUEL SYSTEM FABRIC ATED KIT Left wing tank, right wing tank, header tank, M ATERIA L KIT FOR 1-1/2” A XLES
fuel shut off valve, filler neck gaskets, drain fittings, provision for sight gauge, but not included. 26 1-1/2” axles, 1-1/2” axle nuts, slotted 3/4” tubing, drilled 5/8” solid rod, 4130 tubing, sheet
gal. wing tank fuel system for the Sport Trainer. Does not include fuel lines and fittings. steel, shock cords. Includes everything you need to construct the landing gear, shock strut,
Metal Spar Kit Q-013-100 ¨ $2,360.40 and cabane vee.
Wood Spar Kit Q-013-200 ¨ $2,361.10 Landing Gear Kit Q-006-000 ¨ $555.06
n Cowling, Fairing Kits Code 8 M ATERIA L KIT FOR 1-1/4” A XLES
Includes all materials listed in kit Cat. No. Q-006-000 shown above but includes 1-1/4” axles
OPEN COW LING/FAIRING FA BRIC ATED KIT Top cowl, bottom cowl, boot cowl, and axle nuts. Includes everything you need to construct the landing gear, shock strut and
windshield strip, pulley covers, wing root fairings, top fairings, bottom fairings. Includes cabane vee.
components required for cowlings and fairings.
Landing Gear Kit Q-006-100 ¨ $512.40
Fabricated Kit Q-009-000† $1,693.53
FA BRIC ATED KIT FOR 1-1/2” A XLES
Fabricated Kit without holes Q-009-200† $1,644.23 Includes completed landing gear legs, shock struts, cabane vee, shock cord, with 1-1/2” axles.
n Covering Kit Code 8 Ready to go!
POLY- FIBER KIT Kit includes all the materials required to cover your aircraft interior and Fabricated Kit Q-006-999 ¨ **
exterior. Coverings available in regular flat material. Kit includes paint through silver. L A N DING G E A R, DIE SPRING, C A BA N E V EE FA BRIC ATED KIT FOR 1-1/2” A XLES
Complete Kit Q-016-000 $3,642.55 Includes landing gear left & right hand, cabane vee, 1-1/2” axle nuts and die spring shock strut.
n Basic Instrument Kit Code 8 Fabricated Kit Q-006-888 ¨ $1,746.83
The basic instruments you need to equip your aircraft: 2-1/4” panel mount compass, FA BRIC ATED KIT FOR 1-1/4” A XLES
tachometer KT-9, tachometer cable, 30”, 0-120 airspeed, 0-20,000’ altimeter, oil pressure Includes all parts listed in kit Cat. No. Q-006-999 above but includes 1-1/4” axles.
gauge, oil temperature gauge. Fabricated Kit Q-006-199 ¨ $1,874.24
Lycoming Q-017-100 $1,001.65
Continental Q-017-000 $1,048.60
n Door, Windshield, Window Kit Options Code 8
FA BRIC ATED KIT Window set, windshield, upper/lower door (uncovered).
All parts completely fabricated and ready for installation.
Sport Trainer Kit Q-010-000 $978.00 SPORT TR AINER DIE SPRING, FA BRIC ATED
Replace the bungee system with coil spring reliability and performance. Kit includes 2 springs,
Super Sport Kit Q-010-200 $827.29 collar assemblies, 4130 tubing and AN hardware.
n Cockpit, Interior Kit Code 8 M-222-101 pr. $678.42
Blank Instrument panel, baggage compartment, seatbelts/shoulder harnesses, seat slings, n Engine Compartment Kits Code 8
seat cushions, brake pedals, floor boards, ignition switch, throttle controls, throttle inner
connect, throttle cable, cabin heat control, carb. heat control, carb. heat fairing. Includes parts LYCOMING ENGIN E KIT Lycoming engine mount exhaust stacks LH/RH, muffler, muffler
to complete the interior of the Super Sport or the Sport Trainer models. Contains materials to shroud, gascolator & bracket, cabin air box, carb air box. Designed for Lycoming engines up to
complete the seat assemblies. 150 hp. All components are ready for installation.
Cockpit & Interior Kit Q-007-000 ** Q-015-100 $3,395.85
KITS WAG-A-BOND
The Wag-A-Bond is truly a one of a kind recreational LSA (Light Sport Aircraft). Yes, this aircraft has all the capability for providing snappy maneuvers, fast cross country transportation, plus the
unique provision for being easily converted into a camping aircraft. As the Builder, you can choose a classic configuration, which is the true replica of the famous Piper Vagabond, or if you desire a
practical, recreational oriented, camping style Traveler aircraft, our drawings provide you this option as well.
n Drawings
Specifications | Performance Data Description Cat. No. Price
Classic Traveler The Wag-A-Bond Traveler is a two-place side-by-side, quick response, cross-country
Engine from 65 hp to 100 hp Engine from 108 hp to 115 hp airplane with exclusive fold-down seat which provides comfortable sleeping for two
Top Speed 105 MPH 136 MPH occupants. This is an excellent first time builder project as the construction drawings are
complete and explanatory. Each of the 23 pages is a full 34” x 22” size. Included with each
Cruising Speed 95 MPH 120 MPH set of drawings are Builder’s tips covering construction of the fuselage and wings; how-to-do
Stalling Speed 45 MPH 45 MPH sheet metal; finishing; rigging; weight and balance. These drawings make the building process
Rate of Climb 625 FPM 850 RPM understandable and are very easy to follow. Code 7
Gross Weight 1250 lbs. 1450 lbs. R-001-000 $135.00
Empty Weight 700 lbs. 800 lbs. n WAG-A-BOND Kits
Wing Span 29.3 sq. ft. 29.3 sq. ft. Versatility Supreme A respectable 110 MPH cruise at 65% power. Adequate panel space for
Wing Area 147.5 sq. ft. 147.5 sq. ft. communication and nav. Map and convenience pockets in each door. Adjustable seat. High
visibility with overhead skylight & rear D windows. Shoulder harnesses. Large baggage area.
Length Overall 18.7 ft. 18.7 ft. All Code 8.
Height Overall 6.0 ft. 6.0 ft. Strut Materials Kit R-504-000† **
Baggage Capacity 40 lbs. 60 lbs. Landing Gear Fabricated w/die Spring, 1-1/2” Axles R-506-400 ¨ **
Fuel Capacity 12 gal. 26 gal. Landing Gear Materials w/die Spring, 1-1/2” Axles R-506-200 ¨ **
Specifications and standard equipment subject to change. Performance at gross load WAG-A-BOND BLANK INSTRUMENT PANEL
under standard sea level conditions.
Made of 3003-H14 Aluminum M-157-000 $78.00
WAG-A-BOND LANDING GEAR Landing Gear A frame. Limited supply on SALE items.
1-1/4” Landing Gear A Frame, LH M-462-100 $645.00
1-1/4” Landing Gear A Frame, RH M-462-200 $645.00
1-1/2” Landing Gear A Frame, LH M-462-101 $645.00
1-1/2” Landing Gear A Frame, RH M-462-201 $645.00
Wag-A-Bond Shock Strut Adapter Kit M-465-000 $220.00
Wag-A-Bond Engine Mount, Lycoming M-488-000 $600.00
Wag-A Bond Rib Kit M-884-700 **
¨ Oversize shipping charges apply. † Shipped truck, prepayment required. **Call for pricing and availability.
SPORTSMAN 2 + 2
A Unique Four-Place Aircraft . . . n Sportsman 2+2 Kits
A Reproduction of the Famous PA-14 Family Cruiser THE RECREATIONAL PILOT Utmost Adaptability!
The Sportsman 2+2 is a great family cruiser with its roominess, extra baggage area and increased fuel capacity. 2 place or 4 place cavernous cargo area extended wings - add’l 12-1/2 sq. ft.,
The Sportsman 2+2 maintains the docile maneuverability and short field capabilities of our Sport Trainer. The cabin activated spoilers, balanced elevators, no door obstruction, 39 gallons
versatility of this airplane makes it ideal as a trainer because of its wide stance landing gear and slow speed usable fuel, accepts engines 125 to 200 hp, convenient material kits, a true
characteristics. This aircraft also offers superior float plane performance and is easily accessible with its unique utility aircraft. All Code 8
doors and optional turtle deck entry. The Sportsman 2+2 utilizes large tires for off-airport operation and has an
Description Cat. No. Price
instrument panel layout to accommodate full
IFR equipment. There is no question that the Fuselage Materials Kit W-002-000† **
Sportsman 2+2 is an excellent choice for the Fuel System Kit W-014-000 ¨ **
sport recreational pilot! Wing Span 35 ft. 9 in.
Dacron Cover Kit W-011-000 **
Length 23 ft. 4.4 in.
Finishing Kit W-012-000 **
Height 6 ft. 7.5 in.
Wheel and Brake Kit W-013-000 ¨ **
Wing Area 174.12 sq. ft.
Jury/Lift Strut Kit W-006-000† **
Wing Chord 5 ft. 3 in.
Wingtips M-602-000 ¨ **
Empty Weight 1080 lbs.
Balanced Tailgroup Material Kit Q-025-100† **
Useful Load 1120 lbs. ¨ Oversize shipping charges apply. † Shipped truck, prepayment required.
Gross Weight 2200 lbs. ** Call for current pricing and availability.
2+2
84 | onlinecatalog.wagaero.com | 1.800.558.6868 | Prices and Supplies are subject to change without notice
Instrument Repairs 10
n Elevators, Stabilizers, Rudder, Vertical Fin
Balanced Stabilizer, Elevator Original design for later model PA-18s. Code 4
The Wag-Aero Group is not connected with Piper Aircraft Corporation. Description OEM P/N Cat. No. Price
See page 119 for a full disclaimer.
Stabilizer M-569-000 ¨ ea. $640.00
M-205-000 Elevator M-570-000† ea. $520.00
J-3 Style and PA-11, 15 & 17 Style Components
Reconditioned surplus. Manufactured by Piper. Covering required. Code 8
Elevator M-213-000† $419.00
Horizontal Stabilizer Newly manufactured. Uncovered. For J-3s. Code 4
M-206-000 40643-00 M-212-000† $640.00
J-3 Rudder Assembly Uncovered. Rudder arm not included. Code 4
n J-3, PA-11 Doors 41313-00 M-214-000† $545.00
Description Cat. No. Price J-3 Oilite Bearings Code 8
Upper Door Assembly, FAA Approved. Stabilizer | Vertical Fin, 3/8” X 3/8” x 1/4” bronze M-956-000 $1.10
M-206-000 ¨ $475.00
Does not include glass. Replaces OEM P/N 51853-00. Code 4 Elevator | Rudder, 3/4” X 3/8” x 1/4” bronze M-956-001 $2.10
J-3 Upper Door Lower Channel Code 8 M-361-033 $40.50 Clevis Pin For J-3, PA-11, PA-
Lower Door, FAA Approved. 12, PA-14, PA-16,PA-18, PA-20 MS20392-3C55 L-699-492 $.75
Uncovered, with pin. Includes handle and plunger. Replaces OEM P/N 50173-00. Code 4 & PA-22 Code 5
M-205-000 ¨ $560.00 Vertical Fin Fits J-3. Code 4 40592-00 M-040-000 ¨ $370.00
¨ Oversize shipping charges apply. † Shipped truck, prepayment required.
M-038-000 n Engine Parts
Description OEM P/N Code Cat. No. Price
Recessed Carb Heat Fairings
8 M-038-000 $.50
Fairing made of polystyrene. Replicas of originals.
M-217-100
Fairing made of aluminum. 8 M-038-100 $38.00
Fuel-On Fairings
8 M-217-000 $.50
Fairing made of polystyrene. Replicas of originals.
Fairing made of aluminum. 8 M-217-100 $38.00
M-317-000
Nose Cowl Ram Air Box J-3, FAA/PMA’d. Provides a source of ram air
72522-00 4 M-317-000 $170.00
for both cabin and carb heat shrouds. 2” diameter
M-361-020
Flexible Heat Tube Adapter, FAA/PMA’d. 2” diameter 72911-00 4 M-361-020 $65.50
M-088-000
J-3 Firewall Cabin Air Box, FAA/PMA’d. 70422-00 4 M-088-000 $110.00
n Flexible Fuel & Brake Lines n Inspection Plate, Skylight
Description Cat. No. Price
Brake Line, FAA Approved. Fits J-3, PA-11, PA-12, 14, 18, P/N
71061-004. Code 4
M-041-000 D-299-000 $171.48
Fuel Strainer Hose, FAA Approved. J-3 and PA-11 carburetor
M-547-000
to fuel strainer hose. Male connections on both ends. M-268-000
REPLACEMENT PARTS
n Piper Style Aircraft Components
Usable on Amateur Built and other aircraft. Please Note: Only those items identified with a Code 4 are represented as FAA/PMA’d. Modeled after the J-3, L-4 and PA-11 aircraft types.
10 11 22
20
7 26
15
14
9 26
27 6
6 31
21 7
5 30
19
1 4 16
26
6 18 19
19 19
2 3
25 19
8 19
23 19 19
24
24A 12
17
13 29
24B
PIPER J-3, PA-11, 15, 16, 17, 18 & 22 STYLE WING, AILERON PARTS
n J-3 Ribs with Wood Spar Wings FAA /STC’d All Code 4 n J-3 Spars
Description OEM P/N Cat. No. Price Description OEM P/N Cat. No. Price
Full Butt Rib (position 1) 13052-03 M-954-001 ea. $98.70 Front Spar, Douglas Fir (varnished) Code 4 11233 M-951-1DF† $865.00
Full Rib (position 2, 3 & 4) 13052-02 M-954-002 ea. $83.89 Rear Spar, Douglas Fir (varnished) Code 4 11223 M-951-2DF† $865.00
Left Inboard Aileron (position 5) 13042-00 M-954-003 ea. $105.03 n J-3 Ribs with Metal Spar Wings FAA /STC’d All Code 4
Right Inboard Aileron (position 5) 13042-01 M-954-004 ea. $105.03 Butt Rib (position 1) 13052-04 M-955-001 ea. $88.58
Aileron Rib (position 6) 13022-02 M-954-005 ea. $74.43 Full Rib (position 2, 3 & 4) 13052-02 M-955-002 ea. $88.58
Aileron Rib (position 7) 13022-02 M-954-005 ea. $74.43 Left Inboard Aileron (position 5) 13042-00 M-955-003 ea. $105.03
Aileron Rib (strut attach position 8) 13022-03 M-954-006 ea. $74.43 Right Inboard Aileron (position 5) 13042-01 M-955-004 ea. $94.90
Aileron Rib (position 9) 13022-02 M-954-005 ea. $74.43 Aileron Rib (position 6) 13022-05 M-955-005 ea. $74.43
Aileron Rib (position 10) 13022-04 M-954-007 ea. $74.43 Aileron Rib (position 7 & 8) 13022-02 M-955-006 ea. $74.43
Left Outboard Aileron Rib (position 11) 12902-00 M-954-008 ea. $94.90 Aileron Rib (position 9) 13022-02 M-955-016 ea. $74.43
Right Outboard Aileron Rib (position 11) 12902-01 M-954-009 ea. $94.90 Aileron Rib (position 10) 13022-06 M-955-007 ea. $74.43
Tip Rib (position 12) 12912-00,-01 M-954-010 ea. $69.60 Aileron Rib (position 11) 13022-02 M-955-008 ea. $74.43
Tip Nose Rib (1 per wing between ribs 12 & 13) 12652-00,-01 M-954-011 ea. $24.30 Left Outboard Aileron Rib (position 12) 12902-00 M-955-009 ea. $94.90
Nose Rib (9 per wing) 12662-02 M-954-012 ea. $29.70 Right Outboard Aileron Rib (position 12) 12902-01 M-955-010 ea. $94.90
Nose Ribs (between ribs 8 & 9) 12662-03 M-954-013 ea. $29.70 Tip Rib (position 13) 10742-02,-03 M-955-011 ea. $69.60
Tip Nose Rib (between ribs 12 & 13) 16192-00,-01 M-955-012 ea. $24.29
Nose Rib (11 per wing) 12662-02 M-955-013 ea. $24.29
M-151-001
M-361-019 M-526-000
M-326-002
M-326-001
M-142-000
M-143-000 M-145-000
M-140-000
M-141-000
5
n Original PA-18, -20 & -22 Air Vent
1
Can be installed in side window, door skin or side skin.
2 3 6 Operates easily and gives a positive closure. 2-3/4” square
4
with 1-1/2” square opening. Ideal for homebuilts.
4 H-919-000 $85.95
Replicas of Piper styles. Adaptable to other designs. Used on cloth wings.
Description Code Cat. No. Price n J-3 Style Trim Cranks
1. Elevator Grommet 8 M-423-001 ea. $1.50 Trim Crank Handle 3/8” square shaft.
2. Front Trim Yoke Inspection Frame, 6” x 7”. 8 M-423-002 ea. $1.50 8 H-946-000 $19.95
3. Naugahyde Cable Seal Kit. Consists of two slotted H-946-000 8 H-815-001 $19.95
8 M-423-003 $10.00
fuselage and two punched aileron cable seals. Set of 4 Trim Crank Handle Escutcheon
4. Underwing Inspection Ring Grommet, 7” x 4-1/4”. 8 M-423-004 ea. $2.95 H-815-001 8 H-946-001 $13.30
5. Front and Rear Strut Opening Reinforcements 8 M-423-005 ea. $1.65 Trim Crank Handle Escutcheon Spring
6. Tear Drop Reinforcement 8 M-423-006 ea. $2.25 8 H-946-002 $8.45
Trim Tab Control Cover Plate Nose Up/Down markings need
n Pulley Covers to be applied to plate. Replaces OEM P/N 41131-00.
Standard Pulley Cover 4 M-269-000 $34.00
Made of high impact polystyrene.
8 M-147-000 ea. $3.35 H-946-001 Piper Style Trim Tab Control Cover Plate
1-1/4” deep, 3” wide x 5-3/4”
Made of aluminum with embossed Nose Up/Down markings.
long x .040 thick. Thermo-formed. H-946-002 Styled after the original Piper trim tab control cover plate.
Small Pulley Cover 4-1/2” W X 5-1/4” H. Non PMA’d
Made of high impact polystyrene. 1/2” deep, 1-3/4” wide x 8 M-148-000 ea. $2.20 8 M-269-100 $39.95
4-1/2” long x .040 thick. Thermo-formed.
M-269-100 Continuous Trim Cable 8 I-221-000 $221.45
n Control Sticks, Accessories
Description OEM P/N Code Cat. No. Price
H-947-000
Elevator Push-Pull Tube
40901-02 4 M-414-000 $339.00
M-414-100 Fits J-3 & PA-11 aircraft. Uses control cable Cat. No. I-221-000.
M-414-000 Elevator Bell Crank only. 8 M-414-100 $60.00
J-3 Piper Style Throttle Handle Set w/Interconnect. 8 H-947-000 $99.50
Stabilizer Yoke Inspection Cover Set of two. 60571-00, -01 4 M-422-000 $44.50
J-3 Control Stick Torque Tube Assemblies
40223-00 4 M-090-000 $569.00
Replace your worn J-3 unit with a newly manufactured unit.
M-090-000 M-422-000
Control Stick Connector Fits J-3 & PA-11 aircraft. 40261-00 4 M-413-000 $145.00
J-3 & PA-11 Style Stick Assembly
M-413-000 42812-00 4 M-412-000 $269.00
Fits J-3 & PA-11 aircraft. Includes socket and removable stick.
Throttle Cover Plate Exact reproduction of J-3 throttle plate with
41501-00 4 M-594-000 $41.50
M-412-000 M-594-000 imprinted wording. High quality, unpainted. Ideal for most light aircraft.
Prices and Supplies are subject to change without notice | 1.800.558.6868 | onlinecatalog.wagaero.com | 89
4 7
4
A-036-000 A-061-100
3
2
6 2 5
1
A-037-000 A-030-301 A-030-101
Reproductions!
Supplied in original cream face with red pointer hands. Cub emblem on center of face. Make
n Cockpit Parts
Description
1. Rear Seat Cross Tube Replaces OEM P/N 50381-02
M-361-022
Code
4
Cat No.
M-361-022
Price
$86.65
your aircraft completely authentic. FAA/TSO’d. All Code 4 2. J-3 and PA-11 Styles Seat Sling Complete presewn
8 M-375-000 $101.00
Description Cat No. Price canvas seat sling. Includes front and rear.
3-1/8” 0-150 Cub Face Airspeed A-036-000 $756.00 3. Baggage Compartment Fits J-3 and Early PA-11 styles,
8 M-397-000 $40.00
3-1/8” Cub Face Rate of Climb 0-2000 feet. A-037-000 $548.00 presewn.
3-1/8” 0-20,000 Cub Face Altimeter High quality unit features 7 4. Complete J-3 and PA-11 Style Cushion Set Includes all
A-061-100 $1,114.80 8 M-034-000 ¨ $220.85
o’clock setting knob with matte white dial. four pieces. Made of heavy-duty leatherette. Black
Cub Face Tachometers These tachs offer exceptional accuracy and reliability. A removable 5. J-3 Floorboards Set Includes one each front and rear
8 M-037-000 ¨ $89.00
bezel allows range markings to be placed directly on the face of the instrument. Range floorboards
500-3500 RPM. Units have a red needle instead of a black needle like the original. Two year 6. SALE! J-3 Style Seat Back Frame Tube
8 H-948-000 $29.75
manufacturer’s warranty. Replaces OEM P/N 51013-02
3-1/8” Tachometer, Clockwise Rotation 7. J-3 Replacement Front Seat Frame Assembly 4 H-948-001¨ $540.00
A-030-101 $304.85
Average Cruise RPM RT-7 - 2300, P/N D1-112-5023
3-1/8” Tachometer, Counterclockwise Rotation
A-030-301 $323.20
Average Cruise RPM RT-9 - 2300, P/N D1-112-5030
More instruments on pages 3-11.
M-117-000 M-118-000
n North-Aire Float Drawing
Designed for aircraft up to 1,500 lbs. gross n Instrument Panels
weight. Precise detailed drawings of a proven Replaces
Description Code Cat. No. Price
design, drafted with the amateur builder in OEM P/N
mind. Requires only standard shop tools for Panel with Cutouts
fabrication and assembly. Code 7 00024-94 4 M-117-000 $75.00
Five holes each of 3-1/8” dia.
M-503-000 $55.00
Blank Panel 54703-00 4 M-118-000 $69.00
LANDING GEAR
n Landing Gear Parts FAA/PMA’d
M-092-001 J-3 and PA-11 Landing Gear Completely fabricated. Ready to install landing gear with 1-1/4” axle.
M-092-002
Description OEM P/N Code Cat. No. Price
M-929-000
LH 10033-00 4 M-092-001¨ $680.00
RH 10033-01 4 M-092-002¨ $680.00
M-099-000
M-099-001
PA-28 Nose Gear Bumper Block Heavy-duty 13114-000 8 M-929-000 $27.75
M-100-000
M-101-000 J-3 Cabane Vee Assembly up to S/N 8278, uses 1/4” bolt. 21-09 4 M-099-000 ¨ $282.50
J-3 Cabane Vee Assembly S/N 8278 & up, uses 5/16” bolt. 30602-00 4 M-099-001¨ $275.00
M-102-000 J-3 Short Shock Strut Fits both J-3S/N 8278 and up, and L4 series. 15” length. 31392 4 M-100-000 $270.00
J-3 Long Shock Strut Fits both J-3S/N 8278 and up, and L4 series. 25” length. 31382 4 M-101-000 $300.00
1280HD,
J-3 Shock Strut Assy. Includes 1 ea. long and short strut and 2 shock cords. 4 M-102-000 $552.00
31392, 31382
M-098-000 J-3 Boot Covers Black vinyl 31073-00 4 M-098-000 pr. $42.85
n Bushing Assembly For PA-28s
Includes bushing and retaining ring. 69790-00 4 M-893-000 $25.50
M-843-000
M-893-000 n Weldable Float Attach Bracket
¨ Oversize shipping charges apply. Fits Piper series aircraft, J-3 thru PA-18. Includes 6 pieces and installation drawing. 8 M-843-000 $245.00
90 | onlinecatalog.wagaero.com | 1.800.558.6868 | Prices and Supplies are subject to change without notice
CABIN COMPONENTS
n Replica PA-28, 32, 34, 44 Cabin Components All Code 4
Description Cat. No. Price Description Cat. No. Price
Trim Wheel/Flap Handle Covers. PA28 Fixed gear without overhead pitch trim. PA-28, 32, 34, 44 all Models Piper Wing Bolt
Replaces OEM P/N 67785-16, -17; 99243-03 thru -05. Covers 1/8” Thick under the wingbolt covers.
Black M-623-100 $100.00 Thermal vacuum-formed in white paintable plastic
M-623-100
and is trimmed for easy installation. Includes one
Floor Rib Covers PA-28, 32. Replaces OEM P/N 63131-00, -03, -07, -08 -10; 65674-05 left and right. OEM P/N 63942-00, -01.
thru -07, -09, -11, -13, -15; 66615-14.
CALL FOR SPECIAL PRICING! M-860-938 pr. $78.85*
RH/LH, Black M-626-000 $49.00
Piper Seat Rail For PA-28-140 thru PA-44-180T,
M-626-000 PA-28 Floor Trim Fits Cherokee series PA28-150, 160, 180S/N 28-1761 thru 28-3977 all serial numbers. P/N MC62557-04 replaces OEM M-928-000 $270.00
& PA28-235 S/N 28-10003 thru 28-10719. This plastic part is installed on the floor P/N 62557-004.
of the aircraft to cover an aluminum joint line inside the cabin.
Replaces OEM P/N 663131-00
M-860-925 $28.55*
CALL FOR SPECIAL PRICING!
M-860-925 PA-28, -32 Vent Cup Fits all Cherokee models using flanges
OEM P/N 65735-02, -03, -04, -12, -18. THROTTLE QUADRANT
Black M-862-003 $24.00
PA-28, -32 Vent Flanges COVERS
M-862-003
Fits all Cherokee models. OEM P/N 65735-05 FAA/PMA’d. These style covers were used in all PA28 aircraft made since 1969.
thru -07, -13, -19. Available in black. All Code 4
Black M-862-004 $18.00 Description Cat. No. Price
M-862-004 Set of 4 Vent Cups and Flanges. Black M-862-100 $147.00 2-Slotted Housing & Overlay for Fixed Pitch PA-28-140 S/N 28-
Fresh Air Vent Cup Fits the early PA-28’s. 25000 & up; -150, -160, -180S/N 28-4378 & up. OEM P/N 67232-12,
Does not require flanges 2-5/8” O.D. OEM P/N -13, -15, -21, -22, -25, -40, -41, -46; 65846-00
M-629-000 21154-03, -04; 63994-00, -02 thru -08. M-639-000 $100.00
Black M-629-000 $20.00 2-Slotted Housing Only For all aircraft listed above. OEM P/N 67232-12, -13,
Replacement Louvered Vents 4-3/4” L x 1-1/4” W. -15, -21, -22, -25, -40, -41, -46.
M-634-100
Replaces Original Piper P/N 473-187 and 461-386. P M-639-002 $82.00
A-28/44 requires 4 vents, and PA-32/34 requires 6 vents.
Overlay only for above OEM P/N 65846-00. M-639-003 $21.00
SALE! Black plastic w/chrome-trim
M-634-100 ea. $27.00 3-Slotted Housing & Overlay for Constant Speed PA-28-235S/N 2 8-11040
OEM P/N 473-195; 461-391
M-892-000 & up; PA-28-180S/N 30005 & up; PA-28R 200S/N 28R-30482 & 35001 & up;
Side-Mounted Sunvisor Uses existing hardware. PA-28-201, -236 w/o mixture lean/cutoff button. OEM P/N 67232-40, -41, -46;
Fits PA-28/44 OEM P/N 65866-00, -804 M-892-000 ea. $94.00 67239-00; 65846-00.
Fits PA-32/34 OEM P/N 65866-02, -803 M-892-001 ea. $93.00 M-639-001 $100.00
Forward Baggage Area Light Cover Overlay only without housing.
M-891-000 $26.00 M-639-004 $21.00
M-891-000 4” diameter OEM P/N 472-330 (12715-00) OEM P/N 67239-00.
M-860-914
¨ Oversize shipping charges apply.
92 | onlinecatalog.wagaero.com | 1.800.558.6868 | Prices and Supplies are subject to change without notice
n Sealed Taylorcraft Lift Strut Assemblies *Approved replacement for OEM Part Numbers.
Aero Fabricators, the manufacturing division of The Wag-Aero Group now has FAA approval to manufacture NEW sealed 4130 Steamline
tubing lift strut assemblies as well as approval to REPAIR and seal existing lift strut assemblies (as long as there is no corrosion) for
Taylorcraft Models A, BC, BC S, BC-65, BC S -65, BC12-65, BC S12-65, BC12- D, BC S12- D, BC12- D1, BC S12- D1, BC12D -85, BC S12D -85,
BC12D -85, BC S12D -4-85, BF, BFS, BF -60, BFS -60, BF -65, BF12-65, BL, BL S, BL-65, BL S -65, BL12-65, BL S12-65, FA - III, 19, F19, F21,
F21A, F21B, F22, F22A, F22B, F22A. These sealed lift struts satisfy the requirements of AD 2007-16-14. All Code 4
Description Major Minor Wall Thickness OEM P/N Cat. No. Price Each
Rear Lift Strut w/clamp 1.78 1.06 .049 A-A854* AA854SK† $680.00
Rear Jury Strut clamp only 1-296-1* 1296-1 $14.00
Front Lift Strut w/clamp 2.67 1.44 .049 A-A815* AA815SK† $760.00
Front Jury Strut clamp only fits Aero Fabricators strut A8922 $18.50
Front Jury Strut clamp only fits original strut A-892 A892 $16.75
Remanufactured Front Sealed Lift Strut without clamp. AMOC replacement for Airworthiness A-989-000 $250.00
Front Clamp Rear Clamp Remanufactured Rear Sealed Lift Strut without clamp. AMOC replacement for Airworthiness A-989-100 $300.00
† Shipped truck, prepayment required.
D4026
Description OEM P/N Cat. No. Price Description OEM P/N Cat. No. Price
Baggage Compartment Custom designed to n Tail Flying Wires, Drag Wires, Accessories
provide an area for storing baggage, books, M-930-000 $36.00
Set of Four Stainless Steel Taylorcraft Fying Wires. Includes 2 each A461, D-40
charts, etc. Made of heavy duty canvas. Code 8 B410
wires, 8 each nipples A-986, end insert A4002 and 8/36” hex nut; two each
Seat Sling Made of heavy duty canvas. fuselage straps A4001, fin straps A4008; four each stabilizer straps. Code 4
M-931-000 $124.69
Easy to install. One piece design. Code 8
Set of 4 A4009 L-846-000 $399.95
Bungee Tool Code 7 M-942-000 $215.00 Tail Flying Wires
n Wings, Rudders, Fins 38-1/2” A-460 A460 $24.50
Front & Rear Spars, FAA Approved 40-5/8” A461 A461 $33.65
Direct replacements for Front and Rear Spars. Complete with Phenolic 36-1/2” A-4029 A4029 $35.35
Bushings (installed) and two coats of Spar Varnish. Code 4
44-1/8” D-40 D-40 $32.00
Front Spar B-A87 BA87DF $915.00
Drag Wires Made from 304 Stainless Steel, .125
Rear Spar B-A88 BA88DF $785.00 M-931-000 Inboard, 42-1/4” A-8003 A8003 $16.45
Elevator Trim Tab Frame for L2A, B Outboard, 64” A-8020 A8020 $18.10
D-4026 D4026 $68.00
and M models. Made of wood. Code 4
Lift Strut Fitting, 33-1/32” A-844 A844 $15.80
Rudder Trim Tab for L2, L2A and TG6.
B-410 B410 $18.00 Drag Wire Nipple A-8089 A8089 $8.75
Code 4
Tie Rods, Accessories
Stabilizer FAA Approved For BC12D.
D-A419 DA419 $469.00 Tie Rod Fuselage Strap A-4001 A4001 $22.50
Code 4
Tie Rod End Insert A-4002 A4002 $18.00
Tie Rod Fin Strap A-4008 A4008 $29.25
Tie Rod Stabilizer Strap A-4009 A4009 $26.50
Nipple for #8-36 tie rods A-986 A-986 $9.60
Hex Nuts for drag wire.
A4002 A-986 L-699-301 8/36” Code 8 L-699-301 $.10
L-699-506 M-942-000
8/36”, MS35650-384 Code 5 L-699-506 $2.00
Prices and Supplies are subject to change without notice | 1.800.558.6868 | onlinecatalog.wagaero.com | 93
5146L
12286
21979
n Jury Struts & Components Code 4
Description Models OEM P/N Cat. No. Price
7AC, 7EC,
Front Jury Strut 7FC, 7ECA, 1-2314 12314 $126.00 5175L 5175R
7GCAA,
7GCBC, n Trailing Edges Code 4
Rear Jury Strut 7KCAB, 1-2315 12315 $122.00
Description Models OEM P/N Cat. No. Price
8KCAB
8KCAB 2-1977 21977 $21.84
Jury Strut Spreader All 7 Series 1-2286 12286 $67.50
7ACA, 7ECA, 7GCAA, 7KCAB,
Jury Strut Spreader 8GCBC 1-10359 110359 $32.60 2-1915 21915 $39.50
7GCBC, 8KCAB
Jury Strut Spreader 8KCAB 1-10106 110106 $43.37 7GC, 7HC, 7GCA, 7ECA 3-515 3515 $59.50
Wing Trailing Edge
Jury Strut Spreader 11A, 11AC 1-2461 12461 $37.50 7A, 7B, 7ACA, 7GC, 7BCM,
Jam Nut (Code 5) AN316-8R L-316-08R $.63 7CCM, 7DC, 7EC, 11A, 3-515-1 35151 $59.50
11B, 11C
n Compression Struts, Tubes FAA/PMA’d Code 4
Description Models Cat. No. Price 8GCBC 2-2085 22085 $12.50
Wing Drag Compression Strut Most Models 2694 $97.50 Aileron Trailing Edge All Models 3-542 3542 $47.00
Compression Strut Point Tube 8GCBC 110352 $78.75 Channel Aileron Bay Trailing Edge 8KCAB 2-1979 21979 $17.75
Compression Tube Assembly 8KCAB 110080 $69.00 5-175R (right) 5175R¨ $99.00
Aileron Bay Trailing Edge All Models Except 8KCAB
7ECA, 7GCAA, 5-175L (left) 5175L¨ $99.00
Drag Truss Compression Tube 12302 $90.94
7KCAB, 7GCBC 1" Trailing Edge Material (Only length available is 85”) 1870 1870 $31.00
Note on Model Eligibility: Wag-Aero has made every effort possible to detail installation eligibility for Aeronca parts based upon the best information we have available. If you are uncertain as to whether a specific OEM
part number may be installed on your aircraft, you must consult either your aircraft owner or service manuals, or check with your mechanic. Wag-Aero does not warrant that models listed in the catalog are accurate in all
instances. Please call us if you have questions about specific part numbers and model eligibility and we can research your question prior to your order. ¨ Oversize shipping charges apply. † Shipped truck, prepayment required.
Prices and Supplies are subject to change without notice | 1.800.558.6868 | onlinecatalog.wagaero.com | 95
WING COMPONENTS
41369L
41369R
21887
34741R 34741L
7487
21880
41624K Pedals
410000
12499
315371
12256
12613R
3-1537-1 (front)
3-1537-2L 315371 $82.95
Rudder Pedals, 7ECA, 7GCAA, 7GCBC, 7KCAB,
(left rear) 315372L $89.50
Toe Brake 7ACA, 8KCAB
3-1537-2R 315372R $89.50
(right rear) 4701L 4701R
Brake Cable
11A, 11B, 11C 2-7762 27762 $99.50
Assembly, LH H-795-000
Cable Brake
Assembly, RH
11A, 11B, 11C 2-7763 27763 $99.50 n Controls
Description Cat. No. Price
n Brake Line Assemblies Code 4 Throttle Connecting Rod - Aeronca 7AC Citabria Style replacement
units. Can be adapted to other cockpit uses. Adjust length by cutting M-572-000 $1.75
Description Models OEM P/N Cat. No. Price
and recrimping ends. 33” length. Not PMA’d. Code 6
7EC, 7FC, 7GC, 7GCA, 7HC, Stick Assembly - Aerobatic replacement stick similar to Champion
Hydraulic Brake 7GCB, 7GCBA, 7ECA, 7GCBC, 1-8966 18966 $38.00 Citabria and most other models. Improved leverage for faster rolls
Line Assembly 7GCA A, 7KCAB, 7KC H-795-000 set $69.00
and snappier maneuvers. Set of two. Does not include stick grip. 25”
7CCM, 7EC 1-2940 12940 $13.49 H x 1” O.D. x .049 wall. Not PMA’d. Code 8
Note on Model Eligibility: Wag-Aero has made every effort possible to detail installation eligibility for Aeronca parts based upon the best information we have available. If you are uncertain as to whether a specific OEM
part number may be installed on your aircraft, you must consult either your aircraft owner or service manuals, or check with your mechanic. Wag-Aero does not warrant that models listed in the catalog are accurate in all
instances. Please call us if you have questions about specific part numbers and model eligibility and we can research your question prior to your order. ¨ Oversize shipping charges apply.
Prices and Supplies are subject to change without notice | 1.800.558.6868 | onlinecatalog.wagaero.com | 99
LANDING GEAR
STRINGER SHAPES
SHAPED ENDS
Mushroom
123761
12366 123761
Bull Nose
19992 123762
123671
123672
n Stringers Code 4
M-050-000
Number per Aircraft Style Length OEM P/N Cat. No. Price
Requirements for the 7AC Models
Stringer 1 Mushroom 84-11/16" 1-2376-1 123761¨ $51.00
Stringer 1 Mushroom 92-3/16" 1-2376-2 123762¨ $51.00
Stringer 3 Bull Nose 80" 1-2367-1 123671¨ $38.50
Stringer 2 Bull Nose 101" 1-2367-2 123672¨ $42.86
71301R Stringer 2 Mushroom 103-1/8" 1-2366 12366¨ $51.57
Stringer 2 Mushroom 144-1/2" 1-2679-1 126791† $36.25
n Fiberglass Wheel Fenders, Brackets Code 4
Requirements for the 7EC - 7FC Models
Description OEM P/N Cat. No. Price
Stringer 1 Mushroom 84-11/16" 1-2376-1 123761¨ $51.00
Fender 7AC, 11AC, 11B, 11C 7-607 M-050-000 ¨ ea. $232.15
Stringer 1 Mushroom 92-3/16" 1-2376-2 123762¨ $51.00
7-1301LH 71301L¨
Fender, LH/RH 7GCBC, 7ECA, 7GCAA, 7KCAB, 8KCAB ea. $170.00 Stringer 3 Bull Nose 80" 1-2367-1 123671¨ $38.50
7-1301RH 71301R¨ Stringer 2 Mushroom 101" 1-2367-2 123672¨ $42.86
Wheel Pant Support Bracket 7EC, 7ECA, 7FC, 7GCA, 7GCB, Stringer 2 Mushroom 103-1/8" 1-2366 12366¨ $51.57
2-100081 2100081 $39.50
7GCBA, 7GCBC, 7GCAA, 7HC, 7KCAB
Stringer 2 Mushroom 125" 1-2679-6 126796† $29.50
Wheel Pant Support Bracket 7AC, 7BCM, 7CCM, 7DC, 11AC,
2-868 2868 $68.00 Requirements for the 7GC, 7GC A, 7GCB, 7HC Models
11BC, 11CC
Stringer 1 Mushroom 84-11/16" 1-2376-1 123761¨ $51.00
Wheel Pant Support Tube 7EC, 7ECA, 7FC, 7GC, 7GCA,
1-8790 18790 $83.40 Stringer 1 Mushroom 92-3/16" 1-2376-2 123762¨ $51.00
7GCAA, 7GCB, 7GCBA, 7GCBC, 7KCAB
Stringer 3 Bull Nose 80" 1-2367-1 123671¨ $38.50
n Landing Gear, Fitting, Parts Code 4
Description OEM P/N Cat. No. Price
Stringer 2 Mushroom 103-1/8" 1-2366 12366¨ $51.57
Stringer 2 Mushroom 125" 1-2679-6 126796† $29.50
Spring Gear Axle7EC A, 7GC A A, 7GCBC, 7KC A B, 8KC A B 3-1600 31600 $224.91
Requirements for the 7EC A, 7GCBC, 7GC A A, 7KC A B Models
Landing Gear Yoke Plate Most 7 Series 1-2326 12326 $30.50
Stringer 3 Bull Nose 80" 1-2367-1 123671¨ $38.50
Landing Gear Wheel Retaining Nut 7AC, 7DC, 11AC, 11BC,
1-706 1706 $39.00 Stringer 2 Bull Nose 101" 1-2367-2 123672¨ $42.86
11CC, 7BCM, 7CCM
Landing Gear Axle Spring 7ECA, 7GCAA, 7GCBC, 7KCAB, Stringer 1 Mushroom 84-11/16" 1-2376-1 123761¨ $51.00
2-1917 21917 $181.65
8KCAB Stringer 1 Mushroom 92-3/16" 1-2376-2 123762¨ $51.00
Wheel Pant Axle Nut 7ECA, 7GCAA, 7GCBC, 7KCAB, 8KCAB 2-2145 22145 $62.50 Stringer 2 Mushroom 144-1/2" 1-2679-1 126791† $36.25
Tail Wheel Spring 7ACA, 7EC, 7GC, 7GCA, 7GCB, 7GCBA, Stringer 2 Mushroom 103-1/8" 1-2366 12366¨ $51.57
2-1525 21525 $27.00
7GCBC, 7ECA, 7GCAA, 7KC, 7KCAB, 8KCAB, 8GCBC Requirements for the 8GCBC Model
Tailwheel Shim Measures 3/8” x 1-1/2” x 1-1/2” Stringer 2 Mushroom 103-1/8" 1-2366 12366¨ $51.57
1-9993 19993 $22.90
7EC, 7ECA, 7GC, 7GCB, 7GCA, 7GCBA, 7KC, 7KCAB Stringer 2 Bull Nose 80" 1-2367-1 123671¨ $38.50
Tailspring U Bolt 7GCBC, 7ECA, 7GCAA, 7KCAB, 8GCBC 1-10325 110325 $52.50 Stringer 2 Bull Nose 101" 1-2367-2 123672¨ $42.86
Fitting Assembly 7ACA, 7EC, 7FC, 7GCA, 7GCB, 7GCBA, Stringer 2 Mushroom 144-1/2" 1-2679-1 126791† $36.25
1-8854 18854 $85.00
7GCBC, 7GC, 7HC, 7KC, 7ECA, 7GCAA, 7KCAB, 8KCAB
Add if greenhouse is used
Stud Tail Leaf Spring 7ACA, 7EC, 7FC, 7GC, 7GCA, 7GCA, 7HC,
1-8854-1 188541 $6.50 2 Mushroom 114" 1-9992 19992¨ $44.50
7GCB, 7GBA, 7GCBC, 7ECA, 7GCAA, 7KC, 7KCAB, 8KCAB
Requirements for the 8KCAB Model
Fitting Most Models 1-555 1555 $59.00
Stringer 2 Mushroom 114" 1-9992 19992¨ $44.50
Fairing Clip (narrow) Most 7, 8 & 11 Series 1-2273 12273 $7.50
Stringer 2 Mushroom 103-1/8" 1-2366 12366¨ $51.57
Oleo Packing 1-2119 12119 $22.50
Stringer 3 Bull Nose 80" 1-2367-1 123671¨ $38.50
Landing Gear Wheel Retaining Nut 7ECA, 7GCBC, 7GCAA,
1-10538 110538 $28.61 Stringer 2 Bull Nose 101" 1-2367-2 123672¨ $42.86
7KCAB, 8KCAB, 8GCBC
Landing Gear Oleo Strut Piston 7AC, 7BCM, 7CCM, 7DC, Stringer 1 Mushroom 84-11/16" 1-2376-1 123761¨ $51.00
1-318 1318 $22.50 Stringer 1 Mushroom 92-3/16" 1-2376-2 123762¨ $51.00
11AC, 11BC
Spring Retainer 1-316 1316 $36.50 Requirements for the 11AC Model
Some parts on this page are primed or varnished in accordance to FAA Approved Drawings. Stringer 3 Bull Nose 129" 1-2367-8 123678† $29.00
Stringer 2 Mushroom 120" 1-2679-2 126792† $36.25
Note on Model Eligibility: Wag-Aero has made every effort possible to detail installation eligibility for Aeronca parts Stringer 1 Bull Nose 132" 1-2367-6 123676† $26.50
based upon the best information we have available. If you are uncertain as to whether a specific OEM part number may
be installed on your aircraft, you must consult either your aircraft owner or service manuals, or check with your mechanic. Stringer 4 Bull Nose 117-1/2" 1-2367-3 123673† $45.71
Wag-Aero does not warrant that models listed in the catalog are accurate in all instances. Please call us if you have Stringer 2 Bull Nose 103" 2-771 2771¨ $27.50
questions about specific part numbers and model eligibility and we can research your question prior to your order. ¨
Oversize shipping charges apply. † Shipped truck, prepayment required. Stringer 2 Mushroom 113-1/2" 2-772 2772† $37.00
100 | onlinecatalog.wagaero.com | 1.800.558.6868 | Prices and Supplies are subject to change without notice
7512
4555
7510 510000
7455
22046
AIRFRAME PARTS
714691
710001L
710001R
7772L
12458 712821
7772R
Fuel Tank Strap Only for Tank 7-772 2-942-5 29425 $12.00 Windshield Retainer Most 7 Series 7-487 7487 pr. $116.47
Fiberglass Lower Cowling
77.88" 2-761-1 27611 $23.75
Fuel Tank Strap for Tank 7-511 7ECA, 7GCAA, 7GCBC, 7KCAB, 1965 to Early 7-1282-2 712822¨ $472.50
39.50" 2-761-2 27612 $23.25
11AC 1973 (Lycoming Only)
11.00" 2-761-3 27613 $23.25
Fiberglass Upper Cowling w/o Doors
Fuel Tank Strap for Tank 7-460 7AC, 7ECA, 7GCAA, 7GCBC, 7KCAB, 1965 to 7-1282-1 712821¨ $250.00
67.50" 2-761-5 27615 $35.00
7CCM, 7DC, 7E Early 1973 (Lycoming Only) No Hardware.
Fuel Tank Strap for Tank 7-460 7AC 45.50" 2-761-6 27616 $32.50 Angle Support Cowl Upper
2-1890-1 218901 $6.75
Fuel Tank Strap 7EC A, 7GCA A, 7EC A, 7GC A A, 7GCBC, 7KC A B, 8KC A B
29.63" 2-761-8 27618 $22.50
7GCBC, 7KC AB Fiberglass Cowling 7-1455-1 (upper) 714551¨ $226.50
Fuel Tank Channel Support 8KC A B 4-1496 41496 $34.50 7ECA, 7GCAA, 7GCBC, 7KCAB 1973, 8KCAB
7-1455-2 (lower) 714552¨ $377.50
w/150 hp
Wing Tank Channel Support
4-1498 41498 $56.65 Fiberglass Cowling
7EC A, 7GC A A, 7GCBC, 7KC A B, 8GCBC 7-1455-3 (lower) 714553¨ $508.00
8KCAB w/180 hp, 1973
Fuel Manifold, front 7EC, 7GC A, 7GC A A, 7GCB,
1-8880-1 188801 $43.70 Fiberglass Cowling 7ECA, 7GCAA, 7GCBC, 7KCAB, 1974 to 1980, 8KCAB w/150 hp only
7GCBA, 7GCBC, 7HC, 7KC
Non-Vented Fuel Cap Most 7 & 11 Series 1-2593-2 125932 $17.50 7-1469-1 (upper) 714691¨ $266.50
7-1469-2 (lower) 714692¨ $399.50
Vented Fuel Cap, Code 8 Most 7 & 11 Series Code 8 1-2593-1 E-482-000 $7.35
Fiberglass Cowling 7-1482-1 (upper) 714821 $285.00
Ram Air Fuel Cap Code 8 Most 7 & 11 Series Code 8 E-476-200 $46.85
8KCAB w/180 hp, 1973 7-1482-2 (lower) 714822¨ $499.95
Fuel Tank Vent Fitting 8GCBC 1-10522 110522 $19.95
Nose Bowl Fiberglass 7AC, 7BCM, 7CCM,
Fuel Shut Off Universal Joint Most 7 Series 1-2458 12458 $29.25 4-576 4576¨ $312.50
7DC, 7EC, 7FC, 11AC
Spacer 7ECA, 7GC, 7GCA, 7GCB, 7GCBA, 7HC 1-8871-8 188718 $7.00 Nose Bowl Fiberglass 7EC, 7FC 7-1081 71081¨ $330.00
Note on Model Eligibility: Wag-Aero has made every effort possible to detail installation eligibility for Aeronca parts based upon the best information we have available. If you are uncertain as to whether a specific OEM
part number may be installed on your aircraft, you must consult either your aircraft owner or service manuals, or check with your mechanic. Wag-Aero does not warrant that models listed in the catalog are accurate in all
instances. Please call us if you have questions about specific part numbers and model eligibility and we can research your question prior to your order. ¨ Oversize shipping charges apply.
102 | onlinecatalog.wagaero.com | 1.800.558.6868 | Prices and Supplies are subject to change without notice
AERONCA
X / BELLANCA / CHAMPION AIRFRAME PARTS
12540
4864
4865
41669
4863
2680
AIRFRAME PARTS
123982
31563L
31563R
128922
41408
4866
45621
41654 12568
4673
Note on Model Eligibility: Wag-Aero has made every effort possible to detail installation eligibility for Aeronca parts based upon the best information we have available. If you are uncertain as to whether a specific OEM
part number may be installed on your aircraft, you must consult either your aircraft owner or service manuals, or check with your mechanic. Wag-Aero does not warrant that models listed in the catalog are accurate in all
instances. Please call us if you have questions about specific part numbers and model eligibility and we can research your question prior to your order. ¨ Oversize shipping charges apply.
104 | onlinecatalog.wagaero.com | 1.800.558.6868 | Prices and Supplies are subject to change without notice
12550
12395 12599
n Hardware Code 4
Description Models OEM P/N Cat. No. Price
Aileron Control 7GCBC, 7ECA, 7GCAA,
1-10369 110369 $57.50
Sector Bushing 7KCAB, 8GCBC
Socket-Control
Most 7 & 8 Series 1-2550 12550 $16.75
Stick Bushing
Oleo Shock Strut
Most 7 & 11 Series 1-2565 12565 $57.00
Bushing
Fairlead Pulley
Most Models. Except 8GCBC 1-2636 12636 $12.50
48602
Bushing
41640
Most 7 & 11 Series. Except
Oleo Strut Bushing 1-2788 12788 $14.50
7AC, 11AC
Hinge Bushing Most 7EC and up Series, 8GCBC & 8KC AB
n Firewalls Code 4 .25 ream) 1-3737 13737 $8.00
Description Models OEM P/N Cat. No. Price (.187 ream) 1-3737-1 137371 $5.09
7AC, 7BC, 7CC, 7EC, 7FC, 7GC, Landing Gear 7ACA, 7ECA, 7GCBA, 7GCBC,
1-9837 19837 $23.00
Firewall 7GCB, 7HC, 7JC, 7KC, 7GCA, Bushing 7KCAB, 8GCBC, 8KCAB
4-860-2 48602¨ $210.00
(no large holes) 7GCBA, 7GCAA, 7GCBC, 7KCAB, Air Duct Flange Most 7EC-7KCAB, 8 Series 1-3670 E-465-002 $22.50
7ECA, 8KCAB, 11AC, 11BC, 11CC
Rectangular
Firewall (2 large 7ECA, 7GCAA, 7GCBC, 7KCAB, Most 7 & 8 Series 1-10019 110019 $4.75
Gasket
holes, w/bottom 8GCBC, 8KCAB 4-1640 41640 ¨ $77.50
cut out, Scout) w/cutout Large Light 7EC, 7FC, 7GC, 7GCA, 7HC,
1-8745 18745 $29.50
Bracket Retainer 7GCB, 7GCBA, 7KC
Service Kit - Frame 7AC, 7BCM
SK164 $119.50 Cleveland O-Ring (Code 5) 101-50353 I-621-000 $12.92
Reinforcement Kit (Required for 85 hp Conversion)
Adel Cushioned Clamps - Loop-type, Cushioned, line support clamps, made of aluminum alloy.
See Aeronca Exhaust Systems & Components on Page 68
Cushion is non-fuel resistant. Code 5
n Cables Code 4 5/8” Clamp MS21919-DG10 L-699-500 $.95
Description Models OEM P/N Cat. No. Price 1/8” Clamp MS21919-DG2 L-699-501 $.93
Flap Down 7GCB, 7GCBA, 7GCBC 2-1595 21595 $143.85 1/16” Clamp MS21919-DG3 L-699-502 $.41
Cable Assembly, 1/4” Clamp AN742-4 MS21919-WDG4 I-307-000 $.84
Bottom 7GCB, 7GCBA, 7GCBC, 8GCBC 2-1903 21903 $76.00
1/4” Clamp MS21919-DG4 L-699-503 $.75
7AC, 7BCM, 7CCM, 7DC, 7EC, 1/16” Clamp MS21919-DG7 L-699-504 $.67
Cable - Front
7GC, 7GCBC, 77CCA, 7GCBA,
to Rear Rudder 1-2280 12280 $79.50 Clamp 1-1/2” Diameter Tube
7ECA, 7GCAA, 7GCBC, 7KCAB,
pedal Models: 7CCM, 7EC, 7FC, 7HC, 7GCBC, 7EC A,
8KCAB, 8GCBC. 1-2939 12939 $11.00
7GC A A, 7KC AB, 7KC
Stabilizer Cable
Wire Brace Most 7, 8, & 11 Series 1-2340 12340 $48.30 Clamp Assembly 1-1/2” Diameter Tube
46" long Models: 7CCM, 7EC, 7FC, 7GC, 7GC A, 7HC,
1-2941 12941 $34.50
Rudder Cable Most 7 & 8 Models 1-2364 12364 $109.75 7GCB, 7EC A, 7GC A A, 7KC AB, 7KC
Aeronca Push Pull Cables on Page 41 7CCM, 7EC, 7FC, 7GC, 7GCA,
Clamp 1/4”
7HC, 7GCB, 7ECA, 7GCAA, 1-2941-1 129411 $10.00
Diameter Tube
7KCAB, 7KC
Pulley - Aileron 7ACA, 7ECA, 7GCAA, 7GCBC,
1-10309 110309 $54.60
Control 7KCAB
n Bowden Cable Casings Pulley - Fairlead Most 7, 8
1-2395 12395 $20.00
(aluminum) & 11 Series
(solid wire ends). Spiral wound galvanized wire casing. Used for push-pull controls of any
length. I.D. .078 and O.D. 7/32” dia. Pulley Guard
Most 7, 8 & 11 Series 1-2398-1 123981 $11.50
(rudder cable)
Description Models OEM P/N Cat. No. Price
Anti Friction Bearing Pulley (Non-Metallic) Code 5 MS24566-3B M-062-000 $21.85
Bowden Cable Casing,
7ECA 1-2578-11 1257811 $15.00 Pulley - Aileron 7GCBC, 7ECA, 7GCAA, 7KCAB,
38-1/8" long 1-10365 110365 $66.00
Control Cable 8GCBC
Bowden Cable Casing,
7ECA 1-2578-12 1257812 $18.50 Cylinder Head
56" long Most 7AC-7FC, & 11 Series 1-1776 11776 $19.25
Baffle Spring
Bowden Cable Casing, 7AC, 7CCM, 7DC, 7EC,
1-2578-3 125783 $38.00 Torque Tube Bearing Block (phenolic)
56" long 7FC, 7GC, 7GCB, 7JC
Models: Most 7 Series and 8KCAB 1-2599 12599 $63.50
Bowden Cable Casing,
7EC, 7BCM, 11AC, 11B 1-2578-4 125784 $32.50 Torque Tube Bearing Block (aluminum)
24-3/4" long
Bowden Cable Casing, Models: 7ECA, 7GCAA, 7GCBC,
11AC, 11B 1-2578-5 125785 $32.50 1-10370 110370 $52.50
16" long 7KCAB, 8GCBC, 8KCAB
Bowden Cable Casing, Fabric Hold Down
11AC, 11B 1-2578-7 125787 $32.50 Most 7 & 11 Series 1-2331 12331 $.15
23" long Washer
Bellanca, Citabria Screw Kit L-836-001 $27.15
Note on Model Eligibility: Wag-Aero has made every effort possible to detail installation eligibility for Aeronca parts based upon the best information we have available. If you are uncertain as to whether a specific OEM
part number may be installed on your aircraft, you must consult either your aircraft owner or service manuals, or check with your mechanic. Wag-Aero does not warrant that models listed in the catalog are accurate in all
instances. Please call us if you have questions about specific part numbers and model eligibility and we can research your question prior to your order. ¨ Oversize shipping charges apply.
Prices and Supplies are subject to change without notice | 1.800.558.6868 | onlinecatalog.wagaero.com | 105
n Stabilizer, Elevator Tips FAA approved. Code 4 Call for special pricing. M-860-902
M-860-000
n Dorsal Fin Code 4
150 (all S/N's 1971-1977) & 152 (all S/N's 15072004-
26-10 0431024-1 M-860-918 $29.50
1978-1985) 15072628 & up
172 (1972 & Later) 59904 & up 28-16 0531020-1 M-860-921 $29.45
172 Dorsal Fin Fairing (1969 & newer) or
57162 & up 28-17 0531012-01 M-860-917 $85.00
M-860-917 Skyhawks
M-867-002
M-860-941
G-610-000
G-762-100
G-762-001
n Seat Rails Other models available upon request. Code 4 Sale Items While Supply Lasts! G-762-002 G-762-003 G-762-002
Model S/N Location OEM P/N Cat. No. Price
G-762-000
150A, B, C, D, Inboard 0411545-2 M-861-004 $124.25
15059019 thru 15063059
E, & F Outboard 0411545-1 M-861-003 $124.25 G-762-102
Available with shank drilled for cotter pin or undrilled for stop nut application.
HARDWARE AN BOLTS The length of the AN aircraft bolts is measured from under the head to the end
of the shank. The grip is the unthreaded area of the shank. All Code 5
Length Grip Cat. No. Price A/N Cat. No. Price Length Grip Cat. No. Price A/N Cat. No. Price
AN3 Bolts, Undrilled 3/16”, 10-32 AN3 Bolts, Drilled 3/16”, 10-32 AN5-23A 2-15/32 1-15/16 L-405-23A $.60 AN5-23 L-405-023 $1.11
AN3-3A 3/8 1/16 L-403-03A $.21 AN3-3 L-403-003 $.60 AN5 Bolts, Undrilled 5/16” - 24 AN5 Bolts, Drilled 5/16” - 24
AN3-4A 1/2 1/8 L-403-04A $.18 AN3-4 L-403-004 $.61 AN5-24A 2-19/32 2-1/16 L-405-24A $.76 AN5-24 L-405-024 $1.10
AN3-5A 5/8 1/4 L-403-05A $.20 AN3-5 L-403-005 $.59 AN5-25A 2-23/32 2-4/16 L-405-25A $.58 AN5-25 L-405-025 $1.32
AN3-6A 3/4 3/8 L-403-06A $.12 AN3-6 L-403-006 $.77 AN5-26A 2-27/32 2-5/16 L-405-26A $.75 AN5-26 L-405-026 $.86
AN3-7A 7/8 1/2 L-403-07A $.16 AN3-7 L-403-007 $.65 AN5-27A 2-31/32 2-7/16 L-405-27A $.71 AN5-27 L-405-027 $.96
AN3-10A 1 5/8 L-403-10A $.15 AN3-10 L-403-010 $.92 AN5-30A 3-3/32 2-9/16 L-405-30A $1.20 AN5-30 L-405-030 $1.20
AN3-11A 1-1/8 3/4 L-403-11A $.15 AN3-11 L-403-011 $.42 AN6 Bolts, Undrilled 3/8” - 24 AN6 Bolts, Drilled 3/8” - 24
AN3-12A 1-1/4 7/8 L-403-12A $.25 AN3-12 L-403-012 $.39 AN6-5A 45/64 1/16 L-699-118 $.95
AN3-13A 1-3/8 1 L-403-13A $.20 AN3-13 L-403-013 $.62 AN6-6A 3/4 3/16 L-406-06A $.52 AN6-6 L-406-006 $.89
AN3-14A 1-1/2 1-1/8 L-403-14A $.80 AN3-14 L-403-014 $.69 AN6-7A 7/8 5/16 L-406-07A $.55 AN6-7 L-406-007 $1.45
AN3-15A 1-5/8 1-1/4 L-403-15A $.22 AN3-15 L-403-015 $.66 AN6-10A 1 7/16 L-406-10A $.56 AN6-10 L-406-010 $.84
AN3-16A 1-3/4 1-3/8 L-403-16A $.23 AN3-16 L-403-016 $.72 AN6-11A 1-1/8 9/16 L-406-11A $.80 AN6-11 L-406-011 $.99
AN3-17A 1-7/8 1-1/2 L-403-17A $.28 AN3-17 L-403-017 $.50 AN6-12A 1-1/4 11/16 L-406-12A $.79 AN6-12 L-406-012 $1.00
AN3-20A 2 1-5/8 L-403-20A $.50 AN3-20 L-403-020 $.62 AN6-13A 1-3/8 13/16 L-406-13A $.80 AN6-13 L-406-013 $1.00
AN3-21A 2-1/8 1-3/4 L-403-21A $.35 AN3-21 L-403-021 $.49 AN6-14A 1-1/2 15/16 L-406-14A $.79 AN6-14 L-406-014 $.91
AN3-22A 2-1/4 1-7/8 L-403-22A $.37 AN3-22 L-403-022 $.52 AN6-15A 1-5/8 1-1/16 L-406-15A $.96 AN6-15 L-406-015 $1.59
AN3-23A 2-3/8 2 L-403-23A $.46 AN6-16A 1-3/4 1-3/16 L-406-16A $.90 AN6-16 L-406-016 $.77
AN4 Bolts, Undrilled 1/4” - 28 AN4 Bolts, Drilled 1/4” - 28 AN6-17A 1-7/8 1-5/16 L-406-17A $.74 AN6-17 L-406-017 $1.16
AN4-3A 15/16 1/16 L-699-078 $.30 - - - AN6-20A 2 1-7/16 L-406-20A $.77 AN6-20 L-406-020 $.87
AN4-4A 1/2 1/16 L-404-04A $.55 AN4-4 L-404-004 $.35 AN6-21A 2-1/8 1-9/16 L-406-21A $.80 AN6-21 L-406-021 $1.45
AN4-5A 5/8 3/16 L-404-05A $.20 AN4-5 L-404-005 $.56 AN6-22A 2-1/4 1-11/16 L-406-22A $.91 AN6-22 L-406-022 $1.57
AN4-6A 3/4 5/16 L-404-06A $.34 AN4-6 L-404-006 $.64 AN6-23A 2-3/8 1-13/16 L-406-23A $.91 AN6-23 L-406-023 $.91
AN4-7A 7/8 7/16 L-404-07A $.30 AN4-7 L-404-007 $.68 AN6-24A 2-1/2 1-15/16 L-406-24A $.98 AN6-24 L-406-024 $1.69
AN4-10A 1 9/16 L-404-10A $.40 AN4-10 L-404-010 $1.46 AN6-25A 2-5/8 2-1/16 L-406-25A $1.08 AN6-25 L-406-025 $1.37
AN4-11A 1-1/8 11/16 L-404-11A $.33 AN4-11 L-404-011 $.70 AN6-26A 2-3/4 2-3/16 L-406-26A $1.15 AN6-26 L-406-026 $1.25
AN4-12A 1-1/4 13/16 L-404-12A $.31 AN4-12 L-404-012 $.70 AN6-27A 2-7/8 2-5/16 L-406-27A $1.09 AN6-27 L-406-027 $1.25
AN4-13A 1-3/8 15/16 L-404-13A $.55 AN4-13 L-404-013 $.80 AN6-30A 3 2-7/16 L-406-30A $1.12 AN6-30 L-406-030 $1.08
AN4-14A 1-1/2 1-1/16 L-404-14A $.30 AN4-14 L-404-014 $.60 AN6-32A 3-1/4 2-11/16 L-406-32A $1.55 AN6-32 L-406-032 $1.85
AN4-15A 1-5/8 1-3/16 L-404-15A $.88 AN4-15 L-404-015 $.51 AN6-33A 2-15/16 2-13/16 --- --- AN6-33 L-406-033 $1.90
AN4-16A 1-3/4 1-5/16 L-404-16A $.48 AN4-16 L-404-016 $.64 AN6-34A 3-1/2 2-15/16 L-406-34A $1.36 AN6-34 L-406-034 $2.00
AN4-17A 1-7/8 1-7/16 L-404-17A $.44 AN4-17 L-404-017 $.60 AN6-36A 3-5/16 3-3/16 L-406-36A $1.88 AN6-36 L-406-036 $2.08
AN4-20A 2 1-9/16 L-404-20A $.46 AN4-20 L-404-020 $.62 AN6-41A 4-7/32 3-9/16 L-406-41A $2.25 AN6-41 --- ---
AN4-21A 2-1/8 1-11/16 L-404-21A $.45 AN4-21 L-404-021 $.47 AN6-43A 4-3/8 3-13/16 L-406-43A $2.25 AN6-43 L-406-043 $3.65
AN4-22A 2-1/4 1-13/16 L-404-22A $.75 AN4-22 L-404-022 $.75 AN7 Bolts, Undrilled 7/16” - 20 AN7 Bolts, Drilled 7/16” - 20
AN4-23A 2-3/8 1-15/16 L-404-23A $.55 AN4-23 L-404-023 $.62 AN7-14A 15/16 13/16 L-407-14A $1.50 AN7-14 --- ---
AN4-24A 2-1/2 2-1/16 L-404-24A $1.00 AN4-24 L-404-024 $.86 AN7-16A 1-3/16 1-1/16 --- --- AN7-16 L-407-016 $2.45
AN4-25A 2-5/8 2-3/16 L-404-25A $.65 AN4-25 L-404-025 $.67 AN7-17A 1-5/16 1-3/16 L-699-134 $2.34 AN7-17 --- ---
AN4-26A 2-3/4 2-5/16 L-404-26A $.69 AN4-26 L-404-026 $.70 AN7-20A 1-7/16 1-5/16 L-699-135 $2.41 AN7-20 --- ---
AN4-27A 2-7/8 2-7/16 L-404-27A $.70 AN4-27 L-404-027 $.99 AN7-21A 1-9/16 1-7/16 --- --- AN7-21 L-407-021 $2.50
AN4-30A 3 2-9/16 L-404-30A $.72 AN4-30 L-404-030 $.98 AN7-22A 2-11/32 1-11/16 --- --- AN7-22 L-407-022 $2.90
AN4-32A 2-7/8 2-13/16 --- --- AN4-32 L-404-032 $.85 AN7-25A 2-23/32 2-1/16 --- --- AN7-25 L-407-025 $2.85
AN4-35A 3-1/4 3-3/16 --- --- AN4-35 L-404-035 $.90 AN7-26A 2-27/32 2-3/16 --- --- AN7-26 L-407-026 $2.75
AN4-36A 3-3/8 3-5/16 L-404-36A $.98 AN7-27A 2-31/32 2-5/16 --- --- AN7-27 L-407-027 $2.55
AN5 Bolts, Undrilled 5/16” - 24 AN5 Bolts, Drilled 5/16” - 24 AN7-30A 3-3/32 2-7/16 --- --- AN7-30 L-407-030 $3.21
AN5-4A 1/2 1/16 L-405-04A $.45 AN5-4 L-405-004 $.58 AN7-31A 3-7/32 2-9/16 --- --- AN7-31 --- ---
AN5-5A 5/8 3/16 L-405-05A $.35 AN5-5 L-405-005 $.60 AN7-32A 3-11/32 2-11/16 L-407-32A $2.29 AN7-32 L-407-032 $2.55
AN5-6A 27/32 5/16 L-405-06A $.40 AN5-6 L-405-006 $.90 AN7-36A 3-27/32 3-3/16 --- --- AN7-36 L-407-036 $4.50
AN5-7A 7/8 7/16 L-405-07A $.40 AN5-7 L-405-007 $.83 AN7-40A 4-3/32 3-7/16 --- --- AN7-40 L-407-040 $4.25
AN5-10A 1 9/16 L-405-10A $.40 AN5-10 L-405-010 $.69 AN7-41A 4-7/32 3-9/16 --- --- AN7-41 L-407-041 $3.75
AN5-11A 1-1/8 11/16 L-405-11A $.58 AN5-11 L-405-011 $.70 AN8 Bolts, Undrilled 1/2” - 20 AN8 Bolts, Drilled 1/2” - 20
AN5-12A 1-1/4 13/16 L-405-12A $.37 AN5-12 L-405-012 $.62 AN8-13A 1-15/32 11/16 L-408-13A $1.70 --- --- ---
AN5-13A 1-3/8 15/16 L-405-13A $.56 AN5-13 L-405-013 $.90 AN8-15A 1-23/32 15/16 --- --- AN8-15 L-408-015 $2.20
AN5-14A 1-1/2 1-1/16 L-405-14A $.59 AN5-14 L-405-014 $.77 AN8-16A 1-27/32 1-1/16 --- --- AN8-16 L-408-016 $2.15
AN5-15A 1-5/8 1-3/16 L-405-15A $.54 AN5-15 L-405-015 $1.35 AN8-17A 1-31/32 1-3/16 --- --- --- --- ---
AN5-16A 1-3/4 1-5/16 L-405-16A $.42 AN5-16 L-405-016 $.93 AN8-20A 2-3/32 1-5/16 L-408-20A $3.40 AN8-20 L-408-020 $2.25
AN5-17A 1-7/8 1-7/16 L-405-17A $.74 AN5-17 L-405-017 $.85 AN8-24A 1-15/32 11/16 --- --- AN8-24 L-408-024 $3.45
AN5-20A 2 1-9/16 L-405-20A $.44 AN5-20 L-405-020 $.93 AN8-30A 3-3/32 2-5/16 --- --- AN8-30 L-408-030 $4.55
AN5-21A 2-1/8 1-11/16 L-405-21A $.59 AN5-21 L-405-021 $1.00 AN8-42A 4-11/32 3-9/16 L-408-42A $4.50 AN8-42 L-408-042 $3.35
AN5-22A 2-1/4 1-13/16 L-405-22A $.75 AN5-22 L-405-022 $.83 AN8-44A 4-19/32 3-13/16 --- --- AN8-44 L-408-044 $5.75
Prices and Supplies are subject to change without notice | 1.800.558.6868 | onlinecatalog.wagaero.com | 111
BOLTS AN NUTS
All Code 5 AN/AS # MS# Cat. No. Price
AN6H Bolts AN6H-15A - 1-5/8” (length) L-699-459 $1.80
AN6H-20A - 2” (length) L-699-460 $2.78 Top Bottom
Top Bottom Top Bottom
AN6H-66A L-699-462 $33.90 Metal Stop Nut Elastic Lock Stop Nuts
Shear Nut
AN74A Bolts AN74A-3 L-699-464 $2.73
Full Hex Nut Castle Nut
AN74A-4 L-699-465 $1.75
AN75A-13 L-699-466 $1.45 Description A/N Thread Size Cat. No. Price
MS20007 Series Landing Gear Bolt MS20007-28 L-699-450 $12.50 AN310 Castle Nuts AN310-3 10-32 L-699-150 $.88
AN6H-37A Wood-Prop Bolt, Drilled Head I-325-000 $9.45 Fabricated from steel and cadmium plated AN310-4 1/4-28 L-699-143 $.98
per QQ-P-416A, Type II, Class 3. AN310
AN6H-43 Wood-Prop Bolt, Drilled Head I-327-000 $9.40 castle nuts are used with drilled-shank AN310-5 5/16-24 L-699-144 $1.15
bolts, clevis bolts, eye bolts and studs. The AN310-6 3/8-24 L-699-145 $1.30
L-699-450 I-325-000 I-327-000 slots in the nut accommodate a cotter pin AN310-7 7/16-20 L-699-146 $2.35
for safety purposes. Code 5
AN310-8 1/2-20 L-699-164 $1.70
AN315 Full Hex Nuts AN315-3L 10-32 L-699-160 $.44
Plain hex nut is of rugged construction AN315-3R 10-32 L-699-161 $.18
and can carry the same tension load as the
AN310 castle nut. It requires an auxiliary AN315-4R 1/4-28 L-315-004 $.35
locking device such as a lock washer. AN315-6 3/8-24 L-315-006 $.17
Fabricated from steel and cadmium plated AN315-6L 3/8-24 L-315-06L $.59
per QQ-P-416A, Type II, Class 3. Code 5
AN315-8R 1/2-20 L-315-08R $1.25
AN316 Thin Check Hex Nuts Fabricated AN316-4R 1/4-28 L-316-04R $.48
AN CLEVIS BOLTS from steel and cadmium plated per QQ-
P-416A, Type II, Class 3. AN316 check hex
AN316-7R 7/16-20 L-699-357 $.48
With a slotted brazer type head. For use where nuts can carry half the tension load of the AN316-8R 1/2-20 L-316-08R $.63
1/4” Dia. Cat. No. Price
a large shearing stress occurs. Fabricated from AN315 nut. Used as a locking device for
cadmium and plated in the same manner as AN 24 AN 24-11 L-699-452 $1.40
plain nuts, set screws, rod ends etc. Code 5
AN3 - AN8 aircraft bolts. Code 5 AN 24-12 L-699-453 $1.65
AN320 Shear Nuts AN320-3 10-32 L-699-152 $.90
3/16” Dia. Cat. No. Price AN 24-14 L-699-454 $3.09 The thinner AN320 castellated shear nut, AN320-4 1/4-28 L-699-153 $.65
AN23-8 L-423-008 $1.05 AN 24-16 L-699-455 $2.17 with half the tensile rating of the AN310
nut, is used with clevis bolts and threaded AN320-5 5/16-24 L-699-154 $.90
AN23-9 L-423-009 $1.40 AN 24-17 AN24
L-699-456 $3.09 taper pins which are subject to shearing AN320-6 3/8-24 L-699-173 $1.58
AN23-10 L-423-010 $1.40 AN 24-18 L-699-457 $1.89 stress only. Code 5 AN320-7 7/16-20 L-699-155 $2.30
AN23-11 L-423-011 $1.35
AN320-8 1/2-20 L-699-156 $1.10
AN23-15 AN23 L-423-015 $1.45
AN340, AN345 Hex Nuts These are plain hex machine screw nuts. Code 5
AN23-19 L-423-019 $1.31 AN42B
Eyebolt (coarse thread) AN340-8 8-32 L-699-706 $.78
AN23-22A
L-423-22A $.85 (fine thread) AN345-416 L-699-707 $.20
(undrilled) AN42B-17A
L-699-458 $13.95
AN23-40 L-423-040 $2.49 (undrilled) AN363 All Metal Stop Nuts AN363-1032 10-32 L-699-157 $.80
Designed for use in high temperature AN363-428 1/4-28 L-699-158 $.89
STAINLESS STEEL SCREW KITS installations. Fabricated from carbon steel
and cadmium plated per specification AN363-524 5/16-24 L-699-159 $.62
QQ-P-416C. Code 5 AN363C-624 3/8-24 L-699-802 $3.43
Kits come in poly bags and include necessary stainless steel exterior screws and washers only. AN364 | 365 Elastic Lock Stop Nuts Code 5
No structural screws or washers are included. Eliminate maintenance and increase the resale
value of your aircraft. Code 5. Sale prices while supplies last! Thin Locking Nuts AN364-832 8-32 L-364-832 $.15
The nylon insert gives a friction grip on the AN364-1032 10-32 L-364-032 $.17
threads of the bolt and holds securely. The AN364-428 1/4-28 L-364-428 $.90
Aircraft Cat. No. Price AN364 thin stop nut is for use in structural
AN364-524 5/16-24 L-364-524 $.30
Cessna 120/140/170 L-831-001 $28.75 applications where the bolt is loaded
primarily in shear or in any application AN364-624 3/8-24 L-364-624 $.99
Cessna 150/152 L-831-003 $34.75 where the tensile strength of the regular AN364-632 6-32 L-364-632 $.32
Cessna 172/172RG L-831-004 $36.00 height AN365 is not required. AN364-720 7/16-20 L-364-720 $1.70
Cessna Skylane 180, 185 L-831-005 $38.75 Elastic Locking Nuts AN365-832 8-32 L-365-832 $.25
Cessna 182/182RG L-831-105 $41.50 AN365-1032 10-32 L-365-032 $.18
J-3 L-832-003 $38.50 AN365-428 1/4-28 L-365-428 $.23
PA-18 L-832-004 $18.50 AN365-524 5/16-24 L-365-524 $.30
PA-22 Colt/TriPacer L-832-002 $31.10 AN365-624 3/8-24 L-365-624 $.38
PA-28 Cherokee L-832-007 $45.45 AN365-720 7/16-20 L-365-720 $.70
PA-28 Warrior/Dakota/Archer L-832-009 $33.80 AN365-820 1/2-20 L-365-820 $.62
Bellanca Citabria L-836-001 $27.15 AN924-4D Nuts Flared tube, bulkhead universal fitting. Tube O.D. 1/4. Aluminum alloy. Code 5
Ercoupe L-835-003 $29.10 AN924-4D G-716-000 $1.10
L-506-001
L-506-002 L-699-335
AN818 Coupling Nuts All aluminum alloy. RE3H5 Plain shank to rivet into 1/2” x .035 tubing. Code 5
E-476-017
AN818-4D L-699-703 $2.50 Female 3/16” 1-3/4” M-390-000 $61.50
M-390-000
AN818-6D E-476-017 $1.30 Bell Crank Bearings BC4W10 and BC5W11. Manufactured new as per
M-027-000 AN218-4 or MS20218-1 or 2.12 mounting holes in outer flange. Code 8
L-699-703 AN818-8D L-699-704 $3.34 M-389-000
P/N BC4W10 1/4” I.D. 1- 5/8 O.D. M-027-000 $24.25
AN819 AN819-4D MS520819-4D AN8194D $1.10
AN8194D
Sleeves M-030-000 P/N BC5W11 5/16” I.D. 1- 3/4 O.D. M-030-000 $25.75
AN819-6D MS520819-6D E-476-005 $1.87
KP-3 for No.10 Bolt by Fafnir. Code 5 M-389-000 $4.95
AN819-8D MS520819-8D AN8198D $1.25
GROMMETS
AN822-4D MS20822-4D G-700-000 $15.00
AN822 90˚
AN822-6D MS20822-6D E-476-011 $16.35
Elbow
G-625-000 AN822-8D MS20822-8D G-625-000 $14.95 AN931 Elastic Grommets Flexible, hot oil and coolant resistant. Protects tubing, wiring and control
cables. Black synthetic rubber. Groove width 1/16”. Code 5
AN823 45˚ AN823-4D MS20823-4D G-622-000 $13.50
Elbow Length AN# MS# Cat. No. Price
AN823-8D MS20823-8D G-623-000 $12.30
1-1/8” AN931-10-14 MS35489-17 L-699-606 $.98
AN826 Tee
Flared tube with pipe thread on run. Used in sheet metal from 28 to 6 1-1/16” AN931-8-13 MS35489-14 L-699-607 $.50
G-622-000 gauge. Tube O.D. 3/8”, pipe thread 1/4”. 7/8” AN931-6-10 MS35489-11 G-756-000 $.58
AN826-6D MS20826-6D L-805-000 $17.31 3/4” AN931-3-9 MS35489-134 L-699-600 $.65
L-699-604
AN833-4D 90˚ Elbow 1-5/16” AN931-11-16 MS35489-19 L-699-601 $.58
G-756-000
Flared tube, bulkhead & universal aluminum alloy tube O.D. 1/4”.
1-1/4” AN931-12-17 MS35489-20 L-699-602 $.80
L-806-000
AN833-4D L-699-229 $11.65
7/16” AN931-3-5 MS35489-4 L-699-603 $.28
AN840 Hose Nipple
Pipe thread 1/4”, hose I.D. 3/8”, aluminum alloy. 1-1/4” AN931-4-16 MS35489-8 L-699-604 $.85
AN840-6D L-806-000 $8.20 13/16” AN931-5-9 MS35489-9 L-699-605 $.26
AN910 Coupling
G-718-000
Aluminum alloy, pipe size 1/4”.
AN910-2D G-718-000 $8.90
PIANO HINGES
Anodized aluminum.Shipped in 72” lengths.
n Lug Nut Plate With dry film lube. Code 5 Width Thickness P/N Code Cat. No. Price
MS# MS21051L06 MS21078-3 1-1/16” .040 MS20257-P-2-72 5 M-200-100 $13.90
Thread Size 6-32 10-32 1-1/4” .040 MS20257-P-3-72 5 M-201-100 $31.00
A .935 .984 1-1/2” .040 MS20257-P-4-72 5 M-202-100 $21.25
A J A J B .297 .406 2” .040 MS20257-P-5-72 5 M-203-100 $29.10
C .344 .344 Aluminum (not anodized)
C
C
J .312 .688 1-1/16” .040 A04001772 8 M-300-100 $3.70
Height .171 .234 1-1/4” .040 A04002072 8 M-301-100 $6.17
Cat. No. L-699-700 L-699-701 1-1/2” .040 A04002472 8 M-302-100 $6.82
B B
L-699-701 L-699-700
Price $.90 $4.45 2” .040 A04003272 8 M-303-100 $8.12
Prices and Supplies are subject to change without notice | 1.800.558.6868 | onlinecatalog.wagaero.com | 115
No Lift H-733-000 ea. $1.75 Aeronca 7AC Maximum Airspeed Plate. Made of
NO LIFT No Push H-734-000 ea. $1.75 aluminum.
Passenger Warning Placard 4”L X 1-1/2”W. Code 7 H-980-000 $16.50
NO PUSH Passenger Red H-962-003 ea. $1.65 Communications Guide Contains VHF frequencies,
phonetic alphabet code, flight plan, sequence & light gun
H-732-000, H-733-000, H-734-000
Warning Black H-962-002 ea. $1.65 H-711-000 signals.
Placard Aluminum H-962-001 ea. $2.85 3” H x 6” W H-711-000 $3.75
J-3 Boot Cowl Nameplate FAA Approved Exact Check List Guide Fixed Gear, Fixed Prop Designed for
reproduction of the original. Raised metal lettering, most single engine aircraft. Contains items for starting
requires painting. 6-1/8” x 1-1/2”. Replaces Piper engine, before takeoff, before and after landing. Made of
H-962-001, H-962-002, H-962-003 P/N 480921 Code 4 aluminum.
H-817-000 pr. $29.50 H-712-000 Approx. 2-1/2” x 5” H-712-000 $4.00
Light Sport Decal Code 7 Door Warning Plate An essential item for charter,
P/N B4221-1 Black/Clear H-955-001 ea. $2.10 business and all passenger carrying aircraft. Red
H-817-000
aluminum.
P/N B4221-2 White/Clear H-955-002 ea. $2.10
1-7/8” H x 4-1/4” W H-716-000 $3.50
Experimental Decal Easy to apply! Just remove H-716-000
H-955-001 protective backing and apply to clean surface. Decal has Warning Placard, Drain Fuel Fuel warning drain placard
2” black letters on Mylar base. Length of letters: 16-1/2 complies with current A.D.
inches. Code 8 2-1/8” W x 1-1/8” H H-921-000 $1.75
H-955-002 Black H-737-001 ea. $2.35
n Data Placards Code 8
White H-737-002 ea. $2.35
Amateur Built Kit Set of stainless steel plates for
H-921-000
experimental aircraft. Contains one 3-1/2” W x 2-5/8” H
H-737-001
plate with blank spaces for stamping required aircraft and
builder information. Also includes one 1-1/2” H x 3-1/2” W
passenger warning plate.
H-717-000 $8.35
H-812-100
H-985-003 H-985-002
H-985-001
Cessna Yoke Emblems; pointed, measures 13/16” x 2-1/4”. H-985-001 pr. $31.00
Cessna Yoke Emblems; round, measures 7/8” in diameter. H-985-002 pr. $34.00
Cessna Yoke Emblems; Skyhawk, measures 5/8” x 3”. H-985-003 pr. $24.00
n Hometown Prints Code 7
H-774-000 H-782-000
Our series of prints depicts aviation as it developed. These limited edition prints measure
H-778-000
16” x 20”.
Late Cessna 170,172,175 While Supplies Last! H-774-000 $2.00 Hometown International 04-4010X ea. $1.95
Early Cessna 170, 172, 175 H-778-000 $8.50 Hometown Airport 1930s 04-4008X ea. $1.95
Cessna 180, 182, 185 H-782-000 $8.50 Hometown Landing Field 1920s 04-4007X ea. $1.95
118 | onlinecatalog.wagaero.com | 1.800.558.6868 | Prices and Supplies are subject to change without notice
M-909-001 n Sunvisors
Code 4
Models Cat. No. Price
“How To Fly a Piper Cub” A step-by-step pictorial of how to fly this special airplane. J-3 and
Sport Trainer builders. Code 7 Cessna Tinted Sunvisors by ARFC FAA/PMA
Approved. Eliminate 95% of ultraviolet rays as
F-496-000 $7.85
you travel the skies. Easy to install, only requires a
EAA SportAir Workshop’s Aircraft Phillips screwdriver.
Fabric Covering DVD A two-hour,
easy-to-understand video that 150, 150A-H; 172, 172A-I, K-N; P172, D; R172E-H,
presents all you need to know to cover J & K; 175, 175A-C; 180,180A-H, J & K; 182,
your own airplane using Poly-Fiber 182A-H, J-N,P & Q; R182; 185, 185A-F, A185E,
aircraft coatings. Code 7 F; 206, U206A-F, P206, P206A-E, TP206A-E,
TU206A-G ; 210, 210A-F;210-5, 5A; T210F (S/N
F-610-000 $39.95 51823 to 72884).
P/N 70200 M-909-001 pr. $253.00
M-892-000
Piper Side-Mounted Sunvisor
Uses existing hardware.
Fits PA-28/44
OEM P/N 65866-00, M-892-000 ea. $94.00
-804
M-892-001 Fits PA-32/34
OEM P/N 65866-02, M-892-001 ea. $93.00
-803
n Sunguard Code 7
Place Sunguard panels on the inside of your
windshield to protect your eyes from the glare.
They adhere by static electricity. Made of olive
green see-through Transeal.
6” x 9” Sunguard M-851-000 ea. $2.95
9” x 12” Sunguard M-851-100 ea. $4.75
F-604-100
n Restop 1 Code 7
n The Claw C100 Aircraft Anchoring System Code 7 Disposable urinal pouches with funnel design
Developed by avid pilots, the C100 Aircraft Anchoring System provides superior protection prevents accidental spills. Easily used by men and
for aircraft from damaging winds. The C100 System exclusively utilizes the Claw®, a patented women. Turns liquid into an odorless gel. Restop is
lightweight, high-strength earth anchoring system. The C100 Kit includes one carry bag that sanitary, non-toxic, spill-proof, odorless, safe and
stores three Claw® anchors, nine spikes, one hammer and 30-ft of rope. It total weight is just convenient, trash container safe, and small enough
8 lbs. Each one of the three Claw® anchors can withstand 1,200 lbs. of force, yet, it requires to fit in your pocket.
little effort to install or remove, making it far superior to any other aircraft anchor system. Pack of 3 F-604-100 $5.50
In addition, its simple, low profile design, helps reduce tripping hazards and will not puncture
tires. And unlike other anchor systems, the Claw does not damage your turf. The Claw is ideal
n Cargo/Tie Down Ratchet Strap
Code 7
to provide temporary or long-term security for your aircraft. Total Weight: 8 lbs.
• Easy installation and removal - no more struggling with screw-in anchors H-709-000 Tough red polyester strap measures 1” x 65”,
ratchet clamp with S-Hooks. While Supply Lasts!
Includes Carry Bag, 3 Anchors, 9 Spikes, Hammer, 30-ft. Rope H-988-000 $99.95
SALE! WAS $14.95
H-709-000 $6.95
Pair
n License Holders Code 4
Description Cat. No. Price
Clear plastic 5” x 7” case. F-411-000 $5.50
Black leatherette with clear plastic window.. 8 1/4”W x 7 3/8”H F-411-000 F-424-000 F-424-000 $3.50
Prices and Supplies are subject to change without notice | 1.800.558.6868 | onlinecatalog.wagaero.com | 119
WAG-AERO INDEX
A B Fuel Selector D Filters: Clamps 109
Adel Clamps 109 Baffle Kits 62 Plates, Placards 116, 117 Data Placards 116 Air 15 Cowl Fasteners 109
Adhesives 79 Baffle Kit Hardware 109 Fuel Senders 40 David Clark Headsets 20 Oil 12 Cushioned Adel Clamps 109
Aerobatic: Baffle Material 42 Fuel Strainers 108 Decalin Runup 13 Gyro Filter Assembly 34 Nicopress Sleeves 113
Exhaust Stacks 68 Bale Assembly 71 Manuals 16 Decals 115-117 Magneto Filter 21 Nuts 111
Seat Belt, Harness 72, 73 Batteries and Accessories 29, 30 Nose Strut Repair Kit 107 Die Spring Shock Strut, Covers 53 Fire Extinguishers 122 Piano Hinges 114
Stick 98 Battery Tender 30 Oil Coolers 36 Differential Cylinder Fire Sleeve 34 Pulleys 113
Header Fuel Tank 38 Beacons 25, 26 Plastic Parts 105, 106 Pressure Gauge 19 Firewall Pad 79 Rivets 109
Aeroduct: Bearings 114 Saf-T-Stop 107 Digital Air Temp. Gauge 7 Firewall Shields 41 Rod End Bearings 114
Rings 71 Bearing Packer 18 Seat Belt, Harness 72 Dipstick, Oil 36 Fittings 114 Screw Kit’s 111
Ducting,Tubing 71 Beech: Seat Rails 108 Directional Gyros 9 Flags 115 Thimbles 113
Aeronca Parts: Brake Lining 54 Seat Rollers 107 Document Holders 118 Flap Handle Covers 91 Turnbuckles 112
Ailerons, Parts 93-95 Cowl Plug Kit 47 Seat Stops 107 Door Accessories: Flap Roller Kit 107 Headsets 20
Brake Parts 97, 98 Engine Mounts 61-65 Steering Rods, Boots 106 Handles 43 Flexible Tubing 71 Accessories 20, 21
Bulkheads 100 Exhaust 68 Sun Visors 118 Latches 43 Flight Strobe 27 Jack Plug 21
Cabin Components 100 Seat Belt, Harness 72 Tail Skids, Springs 56 Seals 42, 43 Flightcom Headsets 20 Push-to-Talk 21
Carb Air Scoop 102 Tow Pin 59 Vernier Mixture Cable Assy. 41 Dorsals 91 Intercom 21 Heaters 35
Controls 98 Blo-Proof Gaskets 71 Windows 44 Dow Corning DC4 16 Float: Hobbs Meter 7
Cowling Parts 101 BNC Connectors 30 Windshields 45 Dow Corning® 732 Attach Brackets 89 Homebuilt Parts:
Decals, Placards 115-116 Bolts 110, 111 Yoke Decals 117 Multi-Purpose Sealant 35, 79 Drawings 89 Cabin Heat Box 67
Door,Window Books 16, 118 CHT Gauges 8, 9 Drag Wires 86, 92, 95 Floor Rib Covers 91 Drawings 80, 82, 83
Components 96, 97 Bowden Cable 104 Bayonet Thermocouple Lead 8 Drain Valves: Floorboards 89, 100 Fuel Tank Parts 38, 39
Elevators,Accessories 102 Brackett Air Filters 15 Patch Cables 8 Curtis 37 Fluting Tool 17 Nose Cowls 47
Engine Baffle Kit 62 Brake,Accessories: Champion: Saf-Air 37 Fly Tie Kit 118 Tail Springs 56
Engine Mounts 61-64 Axles, Nuts,Adapters 52 Decals 115 Dual Gauges 9, 10 Foil Tape 79 Sunguards 118
Exhaust System 68 Brake Linings 54 Harnesses 33 Ducting 71 For Sale Banner 50 Hoses:
Fenders 46 Conversion Kit 53 Oil Filters 12 Dynafocal Mounts 61 Fuel: Brake 84, 98
Firewalls 104 Discs 52 Shielded Ignition Dzus Fasteners 109 Additives 13 Fittings 34
Floorboards 100 Fluid Reservoir 52 Harness Sets 33 Caps 38 Fuel Line 34, 84
Flush Valves 37 Hose 84 Spark Plugs 16 E Drain O-Ring Kits 37 Hour Meter 7
Fuel Systems 101 Hydraulic Fluid 13 Spark Plug Anti-Seize 16 Ear Cushions 21 Drain Valves 37 How to Fly Manual 118
Hardware 104 Line Bleeder Assy. 52 Spark Plug Tray 17 EGT Gauges 8 Flush Valves 37 Hub Caps 51
Heater Box Assy. 102 Linings, Rivets 54 Spin-On Oil Conversion Kits 36 Replacement Leads, Probes 8 Gauges 5 Hydraulic Fluid 13
Instrument Panels 96 Master Cylinder 52 Channeling, Rubber 42 ELT, ELT Batteries 23 Hawk 5, 39
Clamps 109 Line Assy. 84 I
Instruments 3-10 Pedals 51, 90, 98 Electric Turn, Bank 6
Jury Struts 94 Pressure Cylinder 52 Cleaning Products 14 Electrical Parts 30 Mr. Funnel 39 ICOM Handhelds 22
Landing Gear Replacement Brake Parts 52, 54 Cleco Tool, Fasteners 17 Elevators, Stabilizers 92, 102 Placards 116, 117 Ignition:
Components 98, 99 Rivets 54 Cleveland Brake Disc 52 Elev. Horn Insp. Plate 84 Pumps 39 Slick Ignition Upgrade Kits 33
Landing Gear, Fairings 98, 99 Rivet Tools 19 Clevis Pins 84, 109 Encoders 23 Primer & Seals 39 Slick Harnesses 33
Leading, Wheel Chocks 2 Clipped Wing Engine: Sampler Cup 39 Switches 30
Trailing Edges 75, 94, 95 Bucking Bars 18 Claw Anchoring System 118 Additives, Oil 13 Senders 5, 40 Inclinometers 7
Lift Struts 94 Bug Nut 41 Clocks,Aircraft 9 Baffle Gasket Material 42 Stop 39 Inspection:
Manuals 16 Bulbs 24-28 Coax Cable 30 Baffle Material Fasteners 109 Strainers 39 Frames 88
Nose Cowls 47 Bushings 50, 61, 89, 92, Cockpit Lights 28 Baffle Kit 62 Tanks 38, 92, 101 Mirror 51
Oleo Struts, Parts 98 98, 103 Code System 4 Conversions 90 Tester 39 Plates, Rings 79
Ribs 93 Collectors Exhaust 67 Hour Meter 7 Valves 37 Tools 18, 19
Rudder Frame, Components 103 C Compasses 3 Manuals 16 Fuel, Hyd. Brake Hose 84 Instrument Hole Punch 17
Seat Belts, Harnesses 72 Cabin: Deviation Card 116 Mount Exchange Program 63 Instrument Hole Drill
Repair Kits, Parts 3 G Template 17
Spars 94 Alum. Foil Tape 79 Mounts 61-64
Stabilizer Frame,Accessories 102 Black Sound Proofing 79 Concorde Batteries 29 Mount Reman 64-65 Gap Tools 17 Instruments,Gauges Accessories:
Stick Assembly 98 Duct Kits 90 Contact Cleaner 13 Mount Bushings 61, 62 Gas Tank: Airspeed 4, 89
Stringers 99 Firewall Pad 79 Contactors 31 Overhaul Stand 58 Gas Caps 38 Altimeter 6, 89
Tail Feather Parts 103 Heat Boxes 67 Continental Manuals 16 Primer 39 Filler Neck Assy. 38, 39 Ammeter,Volt Gauges 5
Throttle Connecting Rod 98 CO Indicator 122 Controls: Preheaters 35 Float 38 Carb Air Temp Gauges 9
Toe Brake Kits 97 Cables: Cables 41 Engine Stand 58 Outlet Flanges 39 CHTs 8, 9
Windows,Windshields Bowden 104 Locks 41 Ercoupe: Placards 116 Bayonet Probe Adapter 8
Parts 44, 45, 96, 97 Control 41 Push-Pull 41 Drain Valves 37 Gascolator, Gasket 39 Leads, Cables 8
Wing Components 95 Cutter 19 Quadrants 41 Exhaust 68 Gaskets, Reusable 35 CHT, EGT 8, 9
Wing Tank Kit 38 Fairleads 113 Stick 88 Flush Valves 37 Gauge, Differential Clock 9
Wing Tips 93 Galvanized 113 Stick Grips 43 Manuals 16 Cylinder Pressure 19 Compasses 3
Aeroquip Hoses 34 Hardware 113 Conversion Kits,Wheel 53 Windshield 45 GATS Jar 39 Compass Repair Kit 3
AeroShell Oil 12 Stainless Steel 113 Corrosion Protection Eurosock 122 Gear Mirror 51 Directional Gyro 9
Aim-A-Squirt 78 Tools 18, 19 ACF, Corrosion X 15 Exhaust Systems: Gill Batteries 29 EGTs 8
Aircraft Jacks 58 CamGuard 13 Cotter Pins 109 Clamps 68-71 Grease 13 Leads, Probes 8
Air: Carburetor: Covering Manual/DVD 118 Experimental 68 Grips 43 Fuel Gauges 5
Box 35 Air Box 35 Covering Materials 76-78 Flanges, Gaskets 71 Grommets 114 Fuel Pressure Gauge 5
Filters 15 Air Temperature Gauge 7 Cowl Bumps 16, 88 Mufflers 68-71 Grove Wheels & Brakes 52 Gyros 9
Scoops,Vents 43 Heat Box 35 Cowling: Nuts 71 Grumman: Horizon 9
Temperature Gauge 7 Heat Box Overhaul 35 Attach Brackets 85 Repairs 66, 67 Flush Valves 37 Filter Assembly 34
Airspeeds 4, 89 Carbon Monoxide Detector 122 Chafe Seal 42 Risers 69 Gyros 9 Hole Cover Plates 11
Alaskan Bush Tailwheel 55 Ceconite Fabric Tapes 77 Fasteners 109 Stacks 68-71 Filter Assy. 34 Hour Meters 7
Alcor TCP 13 Cessna: Latches 43 Tubing 74, 75 Oil Pressure Switch 7
Cowls, Nose 47 H Inclinometers 7
Alternator: 31 Air Box 35 Exterior Decals, Placards 115, 116
Belts 31 Brass Nose Gear Shims 107 Cowl Plug Kit 47 Eyebrow Kits 88 Halon Fire Extinguishers 122 Lights 28
Filter 31 Cowl Bumps 88 Cowl Seals 42 Eyebrow Lights 28 Handhelds,Accessories: Manifold Gauges 7
Altimeters 6, 89 Cowl Plug Kit 47 Crush Gaskets 32 EZ Lubricant 13 Electronic Noise Filter 21 Mounting Nuts, Nut Rings 10, 11
Altitude Encoders 23 Drain Valves 37 Cub Instruments 4, 6, 89 Mounts, RAM 22 Oil Pressure Gauges 10
Aluminum Polish 14 Engine Aileron Hinge 108 Curtis Drain Valves 37 F Radios 22, 23 Oil Press.,Temp. Repair 10
Aluminum Sheeting 74 Engine Mounts 61-65 Cylinder Base Nut Wrench 18 Fabric,Accessories: Hand Tools 17-19 Oil Temp. Gauge 10
Ammeter 5 Exhaust 66-69 Cylinder Head Temp. Gauges 8, 9 Pinked Edge Tape 76, 77 Handles 43, 88 Oil Temp., PSI Gauge 10
AN Hardware 109-114 Fairings 105, 106 Pinking Shears 78 Hardware 104, 109-114 Outside Air Temp Gauges 7
Antennas 21, 23 Fiberglass Parts 46, 47 Poly-Fiber 76 AN Cotter Pins 109 Panels 89, 96
Anti-Collision Flap Roller Kits 107 Reinforcing Tape 76 AN Nuts, Bolts 110, 111 Panel Adapters 11
Beacon System 24, 25 Flap Trailing Edge Spray Gun 78 AN Washers 113 Range Marking Kits 4, 115
Axles Adapters, Nuts 52 Reinforcements 107 Tester 78 Baffle Fastener Kit 109 Rate of Climbs 4, 89
AV Blend 13 Flush Valves 37 Tools 78 Bearings 114 Restrictor Fitting 10
AVL Lube, Rust Prevention 13 Fuel Gauges 5, 39 Fairleads 113 Bolts 110, 111 Shock Mounts 11
Fuel Screen Standpipe Only 108 Cable, Shackles 113 Static Bugs 6
Suction Gauges 5
Prices and Supplies are subject to change without notice | 1.800.558.6868 | onlinecatalog.wagaero.com | 121
INDEX
Tachometers 6, 89 M Main Tank 38 Saf-T-Stops 107 Mounting Ring, Flasher 26, 27 Tow Buddy 60
Cables 6 Mag-Lok Tool 18 Manuals 16 Saf-T Syphon 39 Whelen Strobe Lights 24-27 Tow Pins 60
Turn & Bank 6 Magnetos 33 Nose Cowls 47 Safety Walk 79 Struts 87, 92, 94 Trailing Edge Kits 75, 86
Turn Coordinator 6 Filters 21 Overhead Consoles 90 Safety Wire,Tool 19 Attach Kit 87 Transceivers 23
Vertical Speed 4 Tools 17 PA-28 & 32 Parts 51-54, Screws 112 Fairings 105 Handhelds 22
Insulation 79 Manifold Pressure Gauges 7 62, 71, 72, 90, 91 Stainless Steel Kits 111 Rebuild Kit 90 Trim Tab Cover Plate 88
Intercoms 21 Manuals 16 Piper Parts 4, 6, 71, 84-91 Seals 42, 43 Seal 53 Tubing 74, 75
Interior Placards 116 Master Cylinders 52 Ribs 86 Seat Belts, Harnesses 72, 73 Suction Gauges 5 Aeroduct 71
Interior Marking Kits 117 Matco Master Cylinder Seat Belts, Harnesses 72 Seat Rails 108 Sunshields 118 Aluminum 74
Rebuild Kits 52 Shock Struts 89 Seat Rollers 107 Sunvisors 118 Chromoly 74, 75
J, K Stabilator Tips 91 Service Manuals 16 Super Seam 77 4130 74, 75
Matco Tailwheels 55
J-3 Parts 38, 39, 41-45, 47, 49-51, Maule Tailwheels 56, 57 Tail Springs 56 Sewing Needles 78 Switches 30 Stainless Steel 74
53, 61, 66, 70, 72, 84-90 Micro Mesh 14 Windows 44 Shackles 113 Synchronizer 18 Steel 74, 75
Jacks 58 Microphone Accessories 21 Windshields 45 Shears 78 Streamline 74
Pads, Sets 58 Wing Tanks 38 Sheet Metal: T Vinyl 39
Mirror, Gear 51
Jack Screw Assy 88 Inspection Tools 18 Pitot Flags,Tubes, Protectors 11 Tools 17 T-88 Adhesive 79 Tug 60
Joy Bar Parts 60 Molded Grips 43 Placards 115-117 Steel 74 Tachometers 6 Turn Coordinator 6
Jumper Cables 29 Mooney: Phenolic Plastic Sheet 10 Shielded Ignition Cable 6 Turn & Bank 6
Jury Struts, Clamps 87 Drain Valves 37 Plywood 75 Harness Sets 33 Tail Brace Wires 88 Turnbuckle Components 112
Kit Planes, Drawings 80, 82, 83 Flush Valves 37 Polishes 14 Shipping Info 119 Tailcones 91
Knobs,Throttle 41 Poly-Fiber Products 76, 78 Shock Cord: Taillights 24, 26, 27 U, V
Windshields 45
Control 41 Mufflers Repairs 66, 67 Preheaters 35 Boots 53 Tail Skid, Rudder Parts 56 Vacuum:
Kool Scoop 43 Primers 76, 78 Cords 53 Tailspring 56 Filters 34
Koroseal Lacing Cord 42 N Prints 117 Cover 53 Spring Conn. Kit 56 Pumps 34
Kuntzleman Lighting 24, 25 “N” Numbers/Stencils 115 Probes, Replacement 8 Fittings 53 Tension Kit 56 Regulators 34
Nicopress Tools 19 Propellers: Material 53 Tail Stand 58 System 34
L Accessories 50 Tools 19, 92 Tail Wheels 55, 56, 57 Valves:
Non-Destructive Testing 63
Landing Gear Access: Nose Cowls 47 Bolts 50 Shoulder Harness 73 Parts 55, 56, 57 Covers, Gaskets 35
Adjust. Jack Pad 58 Nuts 111 Bushings 50 Skid-Slip Indicators 7 Tana Ball Markers 58 Drain 37
Axle Stand 58 Exhaust 71 Crush Plate 50 Skylights 45, 84, 96 Tanis Preheaters 35 Fuel 37
Fairings 98, 105 Decals 115 Slick: Tapes: Shut-Off 37
Gear Mirror 51 O Decorative Prop 50 Harnesses 33 Aluminum Foil 79 Varnish 76
Strut Seal 53 Oil,Accessories: Epoxy Coating 76 Ignition Upgrade Kits 33 Fabric 76, 77 Vents:
Landing Light: Aero Shell 12 For Sale Banner 50 Magnetos 33 Leading Edge 42 Cups 91
Bulbs 25 Analysis Kit 12 Sensenich 48-50 Magneto Tools 18 Taylorcraft: Louvered 91
Dimmer Control 28 Cam Guard 13 Pulleys 86, 95, 113 Slick Start 32 Baggage Compart 92 Window 43
Lenses 45 Dipsticks 36 Pulley Cover 88 Snap Vents 43 Bungee Tool 92 Verniers 41
Landing Taxi: Drain Valves 37 Pulley Oil Kit 13 Solenoids 31 Decals 115 Vertical Card Compass 3
Recognition 26 Filter Bibs 12 Push-Pull Controls 41 Sound Proofing 79 Drag Wires 92 Vinyl:
Latches 43 Filters 12 Push-to-Talk Switch 21 Spar Nails 94 Drain Valves 37 Insulated Terminals 30
Leading Edge, Polish 14 Cutter Kit 17 Spars 86, 92, 94 Elevator Trim Tab 92 “N” Numbers 115
Tape 42 Q, R Spar Inspection, Hole Covers 79 Exhaust 68 Tubing 39
Phillips 66 Oil 12
Leading, Pressure Gauges 10 Quadrants 41 Spark Plugs 16 Flush Valves 37 Visors 91, 118
Trailing Edges 75, 86, 95 Pressure Switch 7 Quick Fuel Drains 37 Gaskets 16 Flying Wires 92 Voltage Regulator 31
LED Lighting 24, 25, 27 PSI/Temp. Gauge 10 Radios 22, 23 Gap Tool 17 Fuel Tanks 38, 92 Volt Meters 5
License Holders 118 Quick Drain Valves 37 Radio Antennas 21, 23 Trays 17 Lift Struts 92 Vortex Generator 87
Lift Struts 87, 92, 94 Remote Mount Oil Filters 36 Radio Face Plate Inserts 20 Tools 17 Nose Bowl 47
Light Detectors 28 RAM Mounts 22 Speaker 21 Shock Cord Tool 92 W
Spin-On Oil Filter
Lights: Conversion Kits 36 Randolph Materials 77 Spin-On Oil Conversion Kit 36 Seat Sling 92 Wag-A-Bond Drawings 82
Aircraft 24-27 Tank Covers 36 Rate of Climb 4 Spin-On Oil Filters 12 Spars 92 Washers 113
Airport 28 Tank Gaskets 36 Regulator 31 Spinners 50 Stabilizer 92 Webbing 73
Instrument 28 Temp. Gauges 10 Repairs: Sport Trainer Drawings 80 Step 92 Welding Mat’l Kit 17
LED 24, 25, 27 Temp. Sensor 10 Engine Mount 63-65 Sportsman 2+2 Drawings 83 Tail Flying Wire Accessories 92 Wheel:
Locks 41, 43 Oleo Parts 98 Exhaust 66, 67 Spray Guns 78 Tail Spring 56 Brakes 52, 53
Loctite 79 Order Information 119 Seat Belts 73 Spray Paint 78 Windshields 45 Conversion Kits 53
Log Books 16 O-Rings 32, 113 Resource Manuals/DVDs 16, 78, 118 Stacks 68-71 TCP Fuel Treatment 13 Chocks 2, 58
Lord Mounts 62 Outside Air Temp. Gauge 7 Restop 1 118 Stabilizers 84, 92, 102 Temp. Gauges 10 Fenders 46, 92, 99
LPS 13 Rib Lacing Cord 78 Stabilizer Tips 91, 105 T-Handle Controls 41 Whelen Lighting 24-28
Lubricants 13 P Ribs,Aeronca 93 Stainless Steel Thermocouples 8 Winch 58
Lug Nut Plate 114 Paint 76, 77, 78, 79 Ribs, Piper 86 Screw Kits 111, 112 Thimbles 113 Window:
Luscombe: Patch Cables 8 Rib Repair Kit 87 Tubing 74, 75 Throttle: Sets 44
Baffle Kit 62 Pedals 90 Ring Tongues 30 Stands 58 Connecting Rod 88 Vents 43
Exhaust 68 Phillips 66 Oil 12 Rivets 109 Star Decal 115 Control Quadrant 41 Windshields 45
Fuel Tanks 38 Piano Hinge 114 Brake 54 Starters 32 Cover Plate 88 Windsocks, Frames 122
Manuals 16 Pillow Blocks 41 Tools 19 Static Bug 6 Knob 41 Wing:
Tail Spring 56 Pilot Supplies 12, 16, Rivnuts 109 STCs 53, 90 Locks 41 Aileron Parts 87
Windshields 45 115-118, 122 Rocker Box, Gaskets 35 Steel Tubing 74, 75 Quadrant Covers 91 Root Fairings 87
Lycoming: Pinking Shears 78 Rod End Bearings 114 Steering Rod Boots 106 Tie-Downs 118 Rotators 60
Oil Coolers 36 Piper: Rubber Channeling 42 Stencils 115 Tie-Down Rings 87 Strut Barrel 87
Overhaul Manual 16 Air Box 35, 84 Rudder 84 Stick Assy. 88 Timing Light 18 Strut Forks 87
Brakes Lines 84 Arm 56 Stick Grips 43 Tinnermans 114 Strut Material 74
Cockpit Parts 89 Pedals 90, 98 Stinson: Tires,Tubes 51 Walk 79
Cowl Plug Kit 47 Springs 90 Drain Valves 37 Adapter Spacer 52 Wingtips 47
Decals, Placards 115-117 Runway: Flush Valves 37 Kits 51 Components 26-28
Doors 84 Lights 28 Nose Cowl 47 Tailwheels 55-57 Lights 24, 26, 27
Engine Mounts 61, 63, 65 Light Kits 28 Seat Belts, Harnesses 73 Tundra 51 Wire 30
Exhaust 66, 67, 70, 71 Replacement Lamps 28 Tail Spring 56 Tools 17-19, 52 Connectors 30
Flush Valves 37 Tana Ball Wire Markers 58 Windshields 45 Bag 18 Tools 19
Fuel Placards 116, 117 Strobe Lights 24-27 Winch 58 Wrenches 18
S Strobe Kits 24, 26 Torque Tubes 88
Ground Plug 29 X, Y, Z
Ground Receptacle 29 Saf-Air Drain Valves 37 Beacons 25 Towbars 59, 60
Landing Gear Vee 89 Saf-T-Bloks 18
SAFETY
Description Cat. No. Price H-944-005
13” Windsock & Frame Windsock made of bright red orange Nylon with a
white powder coated frame. Code 7
M-083-100 $64.00
Standard Windsocks by Wag-Aero
These windsocks are fabricated with doubly sewn seams and brass grommets
for attachment. Bright red/orange nylon provides good long distance visibility.
Code 7
8” x 30”L M-082-000 $23.75
13”x 55”L M-083-000 $35.00 H-944-003
A-243-000 A-121-000
A-087-100 A-152-100
A-038-000 A-064-000
Fuel Gauges
Oil Temperature Pressure Gauge 2-1/4” Single Fuel Gauge Gauge only without low level
3-1/8” Gauge Conserves panel space. Reads 0-100 PSI and 40-280˚F. Range markings for warning light. Code 8
Lycoming engines. 56” capillary, with 2” copper end. Code 8 Description Cat. No. Price
Code 8 A-038-000 $289.95 A-243-000 $42.75
2-1/4” Dual Fuel Gauge Gauge only without low level warning
Altimeter A-246-000 light. Code 8
3-1/8” Sensitive Altimeter 0-20,000 feet. Unit features 7 o’clock setting knob. Reads in A-121-000 $69.50
inches w/matte white lettering. Non-TSO’d. Code 8
12” Bendable
A-064-000 $425.00 A-244-000 $82.50
Sender
EGTs 24” Bendable
A-242-000 $82.50
Sender
Description Cat. No. Price
2-1/4” Unlighted Single-Probe EGT Kit Kits includes single
gauge 700-1700˚, 48” long clamp-on exhaust probe. Ideal for A-247-000
A-009-100
Gyros
Description Cat. No. Price
Airspeeds
3-1/8” Directional Gyro TSO’d. Vacuum operated. 5-1/2”
3-1/8” 0-120 Airspeed Non-TSO’d. Code 8 deep. Code 4
A-066-000 $179.50 A-046-000 $1,083.35
3-1/8” 0-150 Airspeed With 5 mph increments. Non-TSO’d. Code 8 3-1/8” Gyro Horizon Latest dial configuration. Experimental.
A-065-000 $174.50 Vacuum operated. 6-1/2” deep. Code 8
More Instruments on Pages 3-10 A-047-100 $571.00
A-065-000 More Gyros on Pages 9
PRST STD
U.S. POSTAGE
PAID
P.O. BOX 181, 1216 NORTH ROAD, LYONS, WI 53148
WALSWORTH
SHOP WITH US AT
Customer Number WAGAERO.COM Priority Code Number
AW-100 AW-200
Fuel Tank
J-3 Main Tanks Exact replacement, aluminum. Ideal for most
homebuilts. 17-1/2”L x 13”W x 14-1/2”H. 12 gal. tank.
Uses Cat. No. G-658-000 drain valve, not included. Code 4
Cat. No. Price D-205-000 D-205-100
E-316-000 $630.00
Vacuum Pumps by Rapco More Fuel Tanks on Pages 38 & 92
Spring Connector Kits
These new cooling fins provide 90% more housing surface Cat. No. Price
for cooler operation and the unirotational pump design Tension Type Kit Attaches
and canted vances provide 50% more usable vane length. tail spring to tailwheel.
All insure longer service life. A field tested inlet screen and Includes 2 springs, 2 D-205-000 $34.50
beveled rotor protect the pump from contamination. Includes connector clips and 2
a two year or 1000-hour manufacturer’s warranty. Call for linkage chains. Code 4
your specific aircraft engine application. Code 4 Window Vent
Window Ventilator Plexiglass cabin Compression Type Kit
Cat. No. Price
ventilator. Mounts firmly at four points. Keeps rudder neutral -
RAP215CC I-217-001 $365.00 Closes tight for winter flying. Code 8 no tension on the post.
D-205-100 $37.00
RAP215CC-9 I-217-003 $365.00 Complete with 2 springs,
Cat. No. Price 4 connector clips and 2
RAP216CW I-217-002 $365.00 Uses 2-1/2” dia. hole H-833-000 $23.25 linkage chains. Code 4
More Vacuum Pumps on Page 34 More Window Vents on Page 43 More Tail Spring Connector Kits on Page 56