Professional Documents
Culture Documents
015 ADV RT 2.9 Certification Scheme Detail
015 ADV RT 2.9 Certification Scheme Detail
Level 2.9
SCOPE OF CERTIFICATION
Course duration : 10 days (80 hrs)
3 day (24 hrs) Exam
Method Title : Radiographic Testing Level 2
Method Code : RT 2.9
Daily program : 8am to 4 pm daily
Scope of Certification:
Tea and coffee breaks in morning and
Industrial sector : Pre-and in service testing : afternoon.
Digital Radiography Lunch is included.
CERTIFICATION REQUIREMENTS
Specific Theory
Interpretation and usage of NDT codes and procedures
TRAINING - ATB
(Approved Training Body) Radiographic testing in accordance with codes and
procedures
Course pre-requisite Typical defects and their origins
RT 2.A certification is required i.e. training provided by an ATB Testing conditions, quality, functionality checks
for a period of 80 hours, a pass mark for an AQB qualification System calibration and verification
examination performed in accordance with ISO 9712, suitable Signal generation, display, characterisation and
practical experience of at least 9 months in RT 2.A interpretation
applications. Software knowledge, storage and measurement
Interpret, evaluate and report
Courses are presented in English. Candidates should indicate,
on the course application form, any special needs they might Practical Skills
have during the training program or subsequent examination. Selection of technique
Compilation of written instruction
Necessities for the first day Performance and quality checks
Students are required to bring a copy of their ID/Passport, Performance of tests
course booking confirmation, 4 x ID photo’s (Colour), protective Interpret and evaluate indications
clothing (for use during practical) , scientific calculator, blue / Report compilation
black pen and pencil as well as a ruler. -------
Course notes shall be provided on first day:
RT 2.9 Spec Notebook
RT Code Book
Questions & answer sheets
Homework
SAQCC – NDT Scheme Training, Examination and & Certification of NDT Personnel TRA EXAM CERT 1
Advanced Radiographic Testing (RT)
Level 2.9
TRAINING – ATB
(continued) 6. interpret and evaluate results according to applicable
standards, codes, specifications or procedures; (Accept
Course conduct / requirements or reject relevant indications)
Approved training programs, provided in accordance with the
7. carry out and supervise all tasks at or below Level 2;
SAQCC requirements, by approved training bodies, or through
distance education programmes, shall be acceptable towards
8. provide guidance for personnel at or below Level 2;
certification.
(Establish and maintain method report sheets)
(Refer to ATB approval audit checklist)
basis
ASNT NDT Handbook Vol 3 – RT; Bossi, R.H., F.A.
-------
Course outcomes Iddings and G.C. Wheeler, tech. ed., Moore P.O, ed
Materials and Processes for NDT Technology; ANST
After completion of this course the candidate shall be able to
perform NDT in accordance with a NDT procedure. Annual Book of ASTM Standards, Vol. 03.03, NDT
Furthermore, the candidate shall be capable of performing the ASNT Study Guide: Industrial Radiography Radiation
SAQCC – NDT Scheme Training, Examination and & Certification of NDT Personnel TRA EXAM CERT 2
Advanced Radiographic Testing (RT)
Level 2.9
ISO 19232 – 5 NDT – RT: Duplex wire image quality Results are valid for 2 years after successful completion and
indicators prior to certification.
ISO 3999 NDT – RT: Apparatus for gamma radiography Examination deliverables
ISO 4993 NDT – RT: Steel castings Examination result letter shall be issued, no later than
four weeks after completion of examination (should the
ISO 14096 – 1 NDT – Dig RT: Qualification of
correct e-mail address have been supplied on the
radiographic film digitisation systems - Part 1: Definitions,
examination application form).
quantitative measurements of image quality parameters,
standard reference film and qualitative control
VISION ACUITY
ISO 14096 – 2 NDT – Dig RT: Qualification of
radiographic film digitisation systems - Part 2: Minimum
The candidate shall provide documentary evidence of
requirements
satisfactory vision in accordance with the following
requirements:
ISO 16371 NDT – Dig RT: Industrial computed
radiography with storage phosphor imaging plates -- Part 1:
near vision acuity shall permit reading a minimum of
Classification of systems
Jaeger number 1 or Times Roman N 4.5 or equivalent
letters (having a height of 1,6 mm) at not less than 30 cm
ISO 17636 – 2 NDT – Dig RT: Part 2: X- and gamma-ray
with one or both eyes, either corrected or uncorrected;
techniques with digital detectors
SAQCC – NDT Scheme Training, Examination and & Certification of NDT Personnel TRA EXAM CERT 3
Advanced Radiographic Testing (RT)
Level 2.9
Certification (Initial)
if a significant interruption takes place in the method for
Complete the NDT logbook and submit a copy together with which the individual is certified;
application form and proof of payment to the Administration
if the individual fails recertification, until such time as the
Controller - Certification
individual meets the requirements for recertification or
All of the following criteria must be met before certification initial certification.
shall be awarded:
Restitution:
ID / Passport
Criteria for restitution of the certificate, shall depend on the
Proof of training record 80 hrs
reason for and the duration of the certificate being invalid,
Current Certificate SAQCC RT 2.A
and can range from having to write only a practical
Examination results ≥ 70% for each paper &sample
examination, to writing a completed qualification
Industrial experience log 9 months (1584 hrs)
examination as per initial candidate requirements.
Vision acuity Refer to Logbook
-------
SAQCC – NDT Scheme Training, Examination and & Certification of NDT Personnel TRA EXAM CERT 4
Advanced Radiographic Testing (RT)
Level 2.9
RENEWAL
(CERTIFICATION SURVEILLANCE)
Annual submission of NDT activity report, including
documentary evidence of a satisfactory visual acuity
The candidate shall apply for renewal at least three months examination taken within the preceding 12 months.
prior to the expiry date by completing the certification
application form and providing proof of payment. Copies of Verifiable documentary evidence of continued
the relevant sections of the NDT logbook should be submitted satisfactory work activity without significant interruption
as supportive evidence. in the method and sector for which certificate renewal is
sought.
Prior to the completion of the first 5 year period of validity and
every 10 years thereafter, certification may be renewed by the
certification body for a new period of five years on production
JOB / TASK DESCRIPTION
of:
Perform / Supervise Inspection, compliant with quality
The individual shall successfully complete a full practical documentation and compile report
examination which demonstrates continued competence
An individual certified to Level 2 has demonstrated
to carry out work within the scope defined on the
competence to perform NDT according to NDT procedures
certificate.
(created by Level 3 personnel and compliant with
Annual submission of NDT activity report, including international procedures and client requirements). Within the
documentary evidence of a satisfactory visual acuity scope of the competence defined on the certificate, Level 2
examination taken within the preceding 12 months. personnel may be authorized by the employer to:
Verifiable documentary evidence of continued satisfactory select the NDT technique for the testing method to be
work activity without significant interruption in the method used;
and sector for which certificate renewal is sought.
define the limitations of application of the testing method;
SAQCC – NDT Scheme Training, Examination and & Certification of NDT Personnel TRA EXAM CERT 5
Advanced Radiographic Testing (RT)
Level 2.9
Proof of training record relating to the sector or category to Certificate holders shall:
be added.
abide by a code of ethics published by the certification
Copy of current SAQCC-NDT certificate in the applicable body;
method and level.
undergo an annual test of visual acuity and submit the
Pass mark in a specific and practical (two samples) results of tests to the employer;
examination relating to the new sector or category.
notify the certification body and the employer in the event
Industrial experience within the new sector or category as that the conditions for validity of certification are not
per CB requirements. fulfilled, or has changed, viz. in the case of changes to
physical abilities.
Once all of these requirements have been met, a certificate
shall be issued indicated the newly added sectors /
categories. The expiry date of the original supplied
certificate shall however still be applicable.
SAQCC – NDT Scheme Training, Examination and & Certification of NDT Personnel TRA EXAM CERT 6