Professional Documents
Culture Documents
Liebert Chilled Water Air Handler Data Sheet
Liebert Chilled Water Air Handler Data Sheet
Liebert Chilled Water Air Handler Data Sheet
1
LIEBERT® CHILLED WATER AIR HANDLER
Liebert® Chilled Water Air Handlers are ensure optimal air flow through the
Key Attributes best used with Liebert iCOM™ unit system while supply air sensors are used
controls, wired or wireless rack sensors, to control the unit cooling capacity.
yy Very efficient with
and a Liebert iCOM™-S system control to Dampers or exhaust fans are
elevated water loop
ensure that the entire data center system automatically adjusted by the Liebert
temperatures and waterside
or airside economizers. is optimized with the other components of iCOM unit control, which also harmonizes
the chilled water system. Liebert iCOM the operation of multiple air handling units
yy Indoor units are control algorithms continuously process to eliminate conflicts in temperature,
typically easy to service readings from the rack inlet sensors to airflow and humidity.
and commission.
Typical Deployments
yy Vertical units along
perimeter or in gallery Advanced Controls For Efficiency, Protection and Insight
discharging into raised floor.
Supply Air
Fan Power Meters Temperature
Sensors
VertivCo.com | Vertiv Headquarters, 1050 Dearborn Drive, Columbus, OH, 43085, USA
© 2016 Vertiv Co. All rights reserved. Vertiv, the Vertiv logo are trademarks or registered trademarks of Vertiv Co. All other names and logos referred to are trade names, trademarks or registered trademarks of their respective owners. While every precaution has been
taken to ensure accuracy and completeness herein, Vertiv Co. assumes no responsibility, and disclaims all liability, for damages resulting from use of this information or for any errors or omissions. Specifications are subject to change without notice.
SL-19712 (06/15) 2