1) The document provides setup instructions for the Samsung ML-2150 laser printer, outlining 4 key steps: unpacking the printer and components, selecting a location, understanding the printer parts, and loading paper.
2) Step 1 involves removing all items from the packaging, including the printer, toner cartridge, power cord, CD-ROM, and setup guide. Step 2 recommends selecting a stable, well-ventilated location away from direct light and sources of heat, cold, or humidity.
3) Step 3 guides the user on installing the toner cartridge, opening the top cover, inserting the cartridge, and closing the cover. Step 4 instructs on loading paper into the 500-sheet tray,
Original Description:
Original Title
Samsung Printer 2150 User Guide _ ManualsOnline.comBack ButtonFilter Button
1) The document provides setup instructions for the Samsung ML-2150 laser printer, outlining 4 key steps: unpacking the printer and components, selecting a location, understanding the printer parts, and loading paper.
2) Step 1 involves removing all items from the packaging, including the printer, toner cartridge, power cord, CD-ROM, and setup guide. Step 2 recommends selecting a stable, well-ventilated location away from direct light and sources of heat, cold, or humidity.
3) Step 3 guides the user on installing the toner cartridge, opening the top cover, inserting the cartridge, and closing the cover. Step 4 instructs on loading paper into the 500-sheet tray,
1) The document provides setup instructions for the Samsung ML-2150 laser printer, outlining 4 key steps: unpacking the printer and components, selecting a location, understanding the printer parts, and loading paper.
2) Step 1 involves removing all items from the packaging, including the printer, toner cartridge, power cord, CD-ROM, and setup guide. Step 2 recommends selecting a stable, well-ventilated location away from direct light and sources of heat, cold, or humidity.
3) Step 3 guides the user on installing the toner cartridge, opening the top cover, inserting the cartridge, and closing the cover. Step 4 instructs on loading paper into the 500-sheet tray,
Setup Guide Step 1: Unpacking 1 Remove the Printer and all accessories from the packing carton. Make sure that the printer has been packed with the following items: N OTES : • If any items are missing or damaged, notify your dealer immediately. •Components may differ from one country to another. • The CD-ROM contains the printer driver, the User’s Guide, and the Adobe Acrobat Reader programme. 2 Carefully remove all of the packing tapes from the printer. Pull the paper tray out of the printer and remove the packing tapes from the tray. Toner Cartridge Power Cord CD-ROM Setup Guide Selecting a Location Select a level, stable place with adequate space for air circulation. Allow extra space for opening covers and trays. The area should be well-ventilated and away from direct sunlight or sources of heat, cold, and humidity. Do not set the printer close to the edge of your desk or table. Clearance Space Front : 482.6 mm (enough space so that trays can be removed) Back : 320 mm (enough space to allow opening of the rear cover) Right : 100 mm Left : 100 mm (enough space for ventilation) Step 2: Understanding Your Printer Front View Top output tray (Face down) Control Panel Tray 1 (500-sheet paper feeder) Toner cartridge Top Cover Paper level indicator Control board cover (needed to access the control board to install printer options) Multi-Purpose Tray Output Support Optional Tray 2 (500-sheet paper feeder) Step 3: Installing the Toner Cartridge 1 Open the top cover. Pull up on the handle to open the cover. 2 Remove the toner cartridge from its bag. Don’t use a knife or other sharp objects as they might scratch the drum of the cartridge. 3 Locate the sealing tape at the end of the toner cartridge. Carefully pull the tape completely out of the cartridge and discard it. N OTE : • The sealing tape should be longer than 550 mm when correctly removed. • Holding the toner cartridge, pull the sealing tape straight to remove it from the cartridge. Be careful not to cut the tape. If this happens, you cannot use the toner cartridge 4 Gently shake the cartridge from side to side to distribute the toner evenly inside the cartridge. C AUTIONS : • To prevent damage, do not expose the toner cartridge to light for more than a few minutes. Cover it with a piece of paper, if left exposed for more than a few minutes. • If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric. 5 Locate the cartridge slots inside the printer, one on each side. 6 Grasp the handle and insert the cartridge in the printer until it snaps into place. 7 Close the top cover. Make sure that the cover is securely closed. N OTE : When printing text at 5% coverage, you can expect a toner cartridge life of approximately 10,000 pages (5,000 pages for the toner cartridge that is shipped with the printer). Step 4: Loading Paper You can load approximately 500 sheets of paper in the tray. 1 Pull the tray out of the printer. 2 Push down on the pressure plate until it locks in position. 3 Prepare a stack of paper for loading by flexing or fanning them back and forth. Straighten the edges on a level surface. 4 Load paper with the print side facing down . Make sure that all four corners are flat in the tray. Pay attention to the paper limit mark on the left inside wall of the tray. Paper overloading may cause paper jams. N OTE : If you want to change the paper size in the tray, refer to the User’s Guide of your printer supplied in the CD-ROM. 5 Slide the tray back into the printer. Rear View Parallel port USB port Power switch Network port (ML-2150: Option ML-2151N, ML-2152W: Standard) Optional Tray2 cable connector Wireless network antenna port (ML-2150, ML-2151N:Option ML-2152W:Standard) Power receptacle Rear output tray (Face up) * The figure above shows a ML-2152W. Samm 1: Lahtipakkimine Võtke printer ja selle tarvikud kartongpakendist välja. Veenduge, et printeriga on kaasas järgnevad tarvikud: Laserprinteri kassett CD-ROM Toitejuhe Paigaldusjuhend Märkused: • Kui mõni tarvik puudub või on vigastatud, teavitage sellest kohe seadme müüjat. • Tarvikud võivad piirkonniti erineda. • CD-ROM sisaldab printeri draiverit, kasutusjuhendit ja pro- grammi Adobe Acrobat Reader. Eemaldage printerilt ettevaatlikult kõik pakkimiseks kasutatud teibid. Koha valik Valige printeri jaoks stabiilne tasane koht, kus ringleks piisavalt palju õhku. Varuge lisaruumi avatavate kaante ja sahtlite jaoks. Printeri piirkond peab olema hästi ventileeritud ja eemal otsesest päikese- valgusest või soojus-, külma- ja niiskusallikatest. Vaadake allpool olevat pilti, millel on kujutatud printeri jaoks mõeldud piirkond. Ärge paigutage printerit liiga laua serva lähedale! Printeri piirkond • Ees:482,6 mm (piisavalt ruumi sahtlite väljavõtmiseks) • Taga: 320 mm (piisavalt ruumi tagakaane avamiseks) • Paremal: 100 mm (piisavalt ruumi ventileerimiseks) • Vasakul: 100 mm (piisavalt ruumi ventileerimiseks) Vaade eest Samm 2: Printeri osad Ülemine väljastus- sahtel (trükitud pool alla) Paberitugi Juhtimispaneel Ülemine kaas Laserprinteri kassett Mitmefunktsiooniline kaas Sahtel 1 (500 lehega paberisöötja)A Valikuline sahtel 1 (500 lehega paberisöötja) Paberi taseme näitaja Juhtimispaneeli kaas (kasutatakse juurdepääsuks juhtimispaneelile printeri seadistamiseks) Vaade tagant Toitelüliti Juhtmeteta võrgu antenni port (ML-2150, ML-2151N:valikuline; ML-2152W: standart) Võrgu port (ML-2150: valikuline; ML-2151N, ML-2152W:standart) USB port Paralleelport Valikulise sahtli 2 kaabli ühenduskoht * Pildil ML-2552W Tagumine väljastussahtel (trükitud pool üles) Toitejuhtme pesa Samm 3: Laserprinteri kasseti paigaldamine Avage ülemine kaas. Selle avamiseks kasutage käepidet. Võtke kassett pakendist välja. Ärge kasutage teravaid esemeid, sest nad võivad kasseti trumlit kahjustada. Leidke kasseti lõpus olev kaitselint. Tõmmake see ettevaatlikult kassetist täielikult välja ja visake ära. MÄRKUS: • Lint peab korrektsel väljatõmbamisel olema pikem kui 550 mm. • Hoides kassetist kinni, tõmmake lint kassetist eemaldamiseks sirgelt välja. Olge ettevaatlik, ärge rebestage linti. Kui lint katki läheb, pole kassetti võimalik kasutada. Raputage kassetti õrnalt küljelt küljele, et kasseti sees olev värvaine jaguneks ühtlaselt. Otsige printeri seest kasseti paigaldamiseks mõeldud avaused üles. Kummalgi poolel on üks suunaja. Võtke käepidemest kinni ja paigutage kassett printerisse, kuni see lukustub oma kohale. Sulgege ülemine kaas. Veenduge, et kaas oleks kindlalt suletud. ETTEVAATUST: • Selleks, et vältida kahjustusi, ärge jätke värvikassetti valguse kätte kauemaks kui mõneks minutiks. Kui kassett on jäänud valguse kätte pikemaks ajaks, katke see paberiga kinni. •Kui värvaine satub Teie riietele, pühkige see kuiva riidega maha ja peske riideid külmas vees. Soe vesi hõlbustab värvaine kangasse imbumist. Märkus: Kui prindite paberit, mis on kaetud tekstiga 5%, saab ühe kassetiga printida välja umbes 8000 lehte teksti (4000 lehte printeriga kaasas oleva kassetiga). Samm 4: Paberi sissepanek Te võite paigutada sahtlisse umbes 500 lehte paberit. Tõmmake sahtel printerist välja. Vajutage sahtli põhjas olev plaat alla, kuni see lukustub oma kohale. Valmistage printerisse panekuks ette paber, koolutades seda kergelt ette- ja tahapoole. Tehke nurgad tasasel pinnal siledaks. Laadige paber trükitava poolega alla. Veenduge, et kõik neli nurka oleksid sahtlis ühel tasapinnal. Pöörake tähelepanu paberi maksimummärgile sahtli vasakul seinal. Liigne paber võib põhjustada paberiummistusi. Märkus: Kui soovite paberi kogust sahtlis muuta, lugege kasutusjuhendit printeriga kaasas oleval CD-ROM-il. Lükake sahtel tagasi printerisse. 12 567 4 SAMSUNG LASERPRINTER Paigaldusjuhend ML-2550 2550 uz A3lgaunu.qxd 28/1/04 11:35 Page 1