Professional Documents
Culture Documents
10 01 24 Btsfinal-1
10 01 24 Btsfinal-1
10 01 24 Btsfinal-1
GST 18%
II. OTHER PROVISIONS
Add for Contingencies and Unforseen Items, etc. @
4.00 % on Sub Total of Civil Works
Total amount
(Rs)
#NAME?
#NAME?
#NAME?
#NAME?
#NAME?
#NAME?
#NAME?
#NAME?
#NAME?
#NAME?
NAME OF WORK:-PROPOSED CONSTRUCTION OF BALASAHEB THACKREY SABHAGRAHA
FOR NAGPUR MUNICIPAL CORPORATION, NAGP
RATE ANALYSIS
Item No.
Item No. Item of work SSR Item NOS. Basic Rate
CIVIL WORK
1 1 Excavation for foundation in earth, soil of all types, 215.00
sand, gravel and soft murum, including removing the 21.02
excavated material up to a distance of 50 m. beyond
the building area and stacking and spreading as
directed, dewatering, preparing the bed for the
foundation and necessary back filling, ramming,
watering including shoring and strutting etc.
complete. (Lift upto 1.5 m.)
49 52 Providing and fixing mild steel grill work for windows, 2182.00
ventilators etc. 20 kg/sqm as per drawing including 40.01
fixtures, necessary welding and painting with one
coats of anticorrosive paint and two coats of oil
56 58 Providing and Fixing mat finish stainless steel (of 302 3690.00
grade ) railing with top pipe of 50 mm dia. and 40.08
vertical pipe of 38 mm dia at 0.60 m c/c or as
required and horizontal pipes of 25 mm dia in three
20
33
33 Supply & Laying of 2 core 2.5 sq mm PVC insulated 138.60
Cu conductor loudspeaker cable
34
34 Supply & Laying of 2 core PVC insulated Cu 126.00
conduction sheilded microphone cable
35
35 Supply & Laying of CAT5 cable 50.40
STAGE DRAPERY
1
Providing and fixing 75 mm dia stabiliser pipe/
P.V.C. soil vent/waste pipe and with necessary
fixtures and fitting such as bends, tees, single 631.00
junctions, slotted vent, clamps etc. complete As
directed by Engineer in charge
Providing and fixing 100 mm dia stabiliser pipe/
1.2 P.V.C. soil vent/waste pipe and with necessary
fixtures and fitting such as bends, tees, single 820.00
junctions, slotted vent, clamps etc. complete As
Providing and fixing on walls/ ceiling/ floor 15 mm dia.
2.1 directed
CPVC pipe Engineer
by in charge
with necessary fittings, remaking good the
demolished portion etc. complete. Including removing
276.00
existing pipe line if necessary and conveying and
stacking the
Providing andsame
fixinginon
PWD chowky or as 20
walls/ceiling/floor directed etc.
mm dia.
2.2 complete.
CPVC pipe with necessary fittings, remaking good the
demolished portion etc. complete. Including removing
322.00
existing pipe line if necessary and conveying and
stacking the
Providing andsame
fixinginonPWD chowky
walls/ ceiling/orfloor
as directed
25 mm etc.
dia.
2.3 complete.
CPVC pipe with necessary fittings, remaking good the
demolished portion etc. complete. Including removing
390.00
existing pipe line if necessary and conveying and
stacking the
Providing andsame
fixinginonPWD chowky
walls/ ceiling/orfloor
as directed
32 mm etc.
dia.
2.4 complete.
CPVC pipe with necessary fittings, remaking good the
demolished portion etc. complete. Including removing
448.00
existing pipe line if necessary and conveying and
stacking the
Providing andsame
fixinginonPWD
wallschowky
/ceiling/orfloor
as directed
40 mm etc.
dia.
2.5 complete.
CPVC pipe with necessary fittings, remaking good the
demolished portion etc. complete. Including removing
561.00
existing pipe line if necessary and conveying and
stacking the same in PWD chowky or as directed etc.
2.6 complete.
Providing and fixing on walls/ ceiling/ floor 50 mm dia.
CPVC pipe with necessary fittings, remaking good the 771.00
demolished portion etc. complete.
3 Providing and fixing 450mm x 550mm size superior type
Belgium mirror with 16mm dia. nickel plated towel rod 896.00
etc complete. (Prior approval of sample and brand by
Ex.Engineer is necessary before use.)
Providing and fixing Glass self 125 mm wide and 600
4 mm long with necessary chromium plated brackets
providing T.W.gutties etc complete. (Prior approval of 440.00
sample and brand by Ex.Engineer is necessary
before
Providinguse.)
and fixing European type white glazed
5 earthenware coupled closet symphonic trap with
symphonic low level white glazed 10 litres cistern with 11,658.00
black backlite seat with all necessary pipe connection
etc. complete.
6 Providing and fixing C.P.pillar cock long neck with
aerator of approed make including necessary sockets 1,691.00
/Providing
union nutand
etc.fixing
complete.
White glazed with bottle trap
earthenware Wash Hand Basin of 63x45 cm size
7 including cold water piller taps, brackets, rubber plugs and
brass chain, stop tap, chromium plate bottle trap and 7,404.00
necessary pipe connections including UPAC waste pipe
and trap upto the outside face of the wall, making
8 Providing
good the and fixing C.P.Angular
damaged stop clock
surface, testing with wall flange
etc. complete.
of approved make continental including necessary 2,797.00
sockets/union nut etc. complete.
9 Providing and fixing C.P.wall mixer with provision for
overhead shower with 115mm long bend pipe and wall 4,932.00
flange of approved make including necessary
sockets/union nut etc.complete.
10 Providing and fixing 100 mm dia. chromium plated brass
showers rose to 15mm dia. supply pipe including 549.00
necessary bend and socket complete.
Providing and fixing White Glazed Earthenware full stall
11 type Urinal with P.V.C. flushing cistern of 5 liters capacity
with fitting, inlet pipes and stop tap, brackets for fixing the 10,174.00
cistern, 32 mm dia. P.V.C flush pipe with fittings and
flushing arrangement including lead soil pipe, lead trap,
12 soil pipe connectionup to the outside face of the wall
Providing and fixing C.P.Two way BIB cock of
approved make continental including necessary 1,518.00
sockets/union nut etc. complete.
13
Providing and fixing 10 cm PVC nahani trap with grating 561.00
etc. complete.
Providing and fixing 15cm rigid PVC Nahani trap including
14 PVC grating,bend,connecting piece of UPVC pipe upto the
outside face of wall,making the good damaged surface and 594.00
testing etc.complete. (Prior approval of sample and brand
Providing,laying and fixing
byEx.Engr.is necessary P.V.C.pipe
before use) of 20mm dia.with
15 fittings such as bends,tees,reducers,clamps,etc.including
necessary excavation,trench filling etc.complete.Including 131.00
removing existing pipeline if necessary and conveying and
stacking the same
Providing,laying andinfixing
PWDP.V.C.pipe
chowky orofas25mmdirected etc.
dia.with
16 complete.
fittings such as bends,tees,reducers,clamps,etc.including
necessary excavation,trench filling etc.complete.Including 163.00
removing existing pipeline if necessary and conveying and
Providing,laying
stacking the same andinfixing
PWDP.V.C.pipe
chowky orofas32mm dia.with
directed etc.
17 fittings
complete.such as bends,tees,reducers,clamps,etc.including
necessary excavation,trench filling etc.complete.Including 235.00
removing existing pipeline if necessary and conveying and
Providing,laying
stacking the same andinfixing
PWDP.V.C.pipe
chowky orofas40mm dia.with
directed etc.
18 fittings
complete.such as bends,tees,reducers,clamps,etc.including
necessary excavation,trench filling etc.complete.Including 313.00
removing existing pipeline if necessary and conveying and
stacking the same
Providing,laying andinfixing
PWDP.V.C.pipe
chowky orofas50mmdirected etc.
dia.with
19 complete.
fittings such as bends,tees,reducers,clamps,etc.including
necessary excavation,trench filling etc.complete.Including 439.00
removing existing pipeline if necessary and conveying and
stacking the same in PWD chowky or as directed etc.
Providing and fixing 15 cm x 10 cm salt glazed stoneware
20 complete.
gully trap in cement concrete 1:4:8 outside the building
including cast iron grating in the sink, connecting glazed 1,665.00
stoneware pipe, brick masonry chamber with cast iron lid
Providing and constructing Brick Masonry Inspection
21 and cast iron grating for the gully trap.
Chamber 60 cm x 45 cm With R.C.C.raft in B.C. soil area
including cost of reinforcement,1:2:4 cement concrete 10,360.00
channels half round G.S.W. pipes, Brick Masonry,
plastering from inside and airtight with 75 mm thick R.C.C.
22 cover medium
Providing duty 140
and laying Kilogrametc.
concrete complete.
pipes of I.S.NP.class of 150
mm dia meter in proper line,level and slope including 566.00
necessary collars, excavation, laying, fixing with collars in
cement mortar 1:1 and refilling the trench complete
23 Providing and laying concrete pipes of I.S.NP.class of 225
mm dia meter in proper line,level and slope including 604.00
necessary collars, excavation, laying, fixing with collars in
cement mortar 1:1 and refilling the trench complete.
Providing and fixing P.V.C. Rain water pipes of 110 mm
24 Providing
outer and laying
diameter concrete
and having wallpipes of I.S.NP.class
thickness of 2.2 to 2.7of 300
mm
mm dia meter
confirming in proper line,level
toI.S.13592-1992 including and sloperain
proper including
water 801.00
necessary collars,
receiving recess excavation,
with P.V.C. plug, laying,
bend,fixing with collars
necessary in
fittings,
cement mortar 1:1 and refilling the trench complete.
such as, offsets, shoes, inluding fixing the pipe on wall
25 using approved wooden cleats projecting 25 mm to 40 mm
from face of wall afixing with clips of approved quality and 592.00
number, filing the joint using rubber gasket with solvent
cement and properly resting the shoe of pipes on C.C. or
masonry blocks, ELECTRICAL WORK scaffolding and
including necessary
maintenance for 3yrs for any leakages or dislocations of
pipes.
SupplyingAll& the P.V.C.fittings
HMS PVC and additional 2 piece socket
1 clips shall be
erecting
got approved
conduit 25mm dia. with necessary 1.1.9 127.00
accessories in wall/floor with from engineer
chiselling in charge
appropriately as etc.
per
specification
complete. no. WG-MA/CC.
2 Supplying & laying HMS PVC conduit 25mm dia with necessary 1.1.10 117.00
accessories in RCC work/false ceiling/false flooring as per specification
no. WG-MA/CC.
3 Supplying & erecting HMS PVC conduit 32mm dia. with necessary 1.1.11 180.00
accessories in wall/floor with chiselling appropriately as per
specification no. WG-MA/CC.
4 Supplying & laying HMS PVC conduit 32mm dia. with necessary 1.1.12 157.00
accessories in RCC work/false ceiling/false flooring as per specification
no. WG-MA/CC.
5 Supplying and erecting PVC trunking (PVC casing-n-capping) of size 1.2.7 44.00
25mm with accessories on wall/ceiling as per specification no. WG-
MA/CON.
6 Supplying and erecting PVC trunking (PVC casing-n-capping) of size 1.2.9 81.00
40mm with accessories on wall/ceiling as per specification no. WG-
MA/CON.
10 Supplying & erecting mains with 2x2.5 sq.mm FRLSH copper PVC 1.3.2 62.00
insulated wire laid in provided conduit/trunking/inside pole/bus bars or
any other places. as per specification no. WG-MA/BW
11 Supplying & erecting mains with 1x2.5 sq.mm FRLSH copper PVC 1.3.2.+N 31.00
insulated wire Green in colour as Earth wire laid in provided
conduit/trunking/inside pole/bus bars or any other places as per
specification no. WG-MA/BW
12 Supplying & erecting mains with 2x4 sq.mm FRLSH copper PVC 1.3.3 89.00
insulated wire laid in provided conduit/trunking/inside pole/bus bars or
any other places. as per specification no. WG-MA/BW
13 Supplying and erecting modular type switch 6A/10A on provided plate 1.6.1 72.00
and box with wiring connections complete.
14 Supplying and erecting modular type switch 16A on provided plate 1.6.2 106.00
and box with wiring connections complete.
15 Supplying and erecting modular type bell-push 6A/10A on provided 1.6.3 106.00
plate and box with wiring connections complete.
16 Supplying and erecting modular type 3 pin 6A multi socket with safety 1.6.10 112.00
shutter on provided plate and box with wiring connections complete.
17 Supplying and erecting modular type 3 pin 6/16A multi socket with 1.6.11 160.00
safety shutter on provided plate and box with wiring connections
complete.
18 Supplying and erecting modular type (two module) electronic dimmer 1.6.21 318.00
600/650W on provided plate and box with wiring connections
complete. (For LED Lights of Ceiling in Auditorium)
19 Supplying and erecting modular type (two module) electronic step 1.6.23 382.00
regulator for fan, on provided plate and box with wiring connections
complete.
20 Supplying and erecting modular type blanking plate one module, on 1.6.24 21.00
provided plate & box.
21 Supplying and erecting PVC Surface modular switch box with double 1.6.27 128.00
mounting plate for 2 module complete.
22 Supplying and erecting PVC Surface modular switch box with double 1.6.30 222.00
mounting plate for 6 module complete.
23 Supplying and erecting PVC Surface modular switch box with double 1.6.32 343.00
mounting plate for 12 module complete.
24 Supplying and erecting unbreakable concealed type modular switch 1.6.34 220.00
box with double mounting plate for 1 module duly flushed to wall with
required chiselling and finishing with cement mortar / POP as per
required to match the background.
25 Supplying and erecting unbreakable concealed type modular switch 1.6.35 221.00
box with double mounting plate for 2 module duly flushed to wall with
required chiselling and finishing with cement mortar / POP as per
required to match the background.
26 Supplying and erecting unbreakable concealed type modular switch 1.6.36 250.00
box with double mounting plate for 3 module duly flushed to wall with
required chiselling and finishing with cement mortar / POP as per
required to match the background.
27 Supplying and erecting unbreakable concealed type modular switch 1.6.38 335.00
box with double mounting plate for 6 module duly flushed to wall with
required chiselling and finishing with cement mortar / POP as per
required to match the background.
28 Supplying and erecting unbreakable concealed type modular switch 1.6.40 523.00
box with double mounting plate for 12 module duly flushed to wall
with required chiselling and finishing with cement mortar / POP as per
required to match the background.
29 Supplying and erecting unbreakable concealed type modular switch 1.6.41 579.00
box with double mounting plate for 16/18 module duly flushed to wall
with required chiselling and finishing with cement mortar / POP as per
required to match the background.
30 Point wiring for light/bell hybrid type (surface type under false ceiling 1.7.15 550.00
and concealed type for drops & switch boards on walls) in min 20 mm
HMS PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH
grade copper wires, modular type switch, earthing and required
accessories as per specification no. WG-HW (Primary Points)
31 Point wiring for ceiling fan hybrid type (surface type under false ceiling 1.7.16 638.00
and concealed type for drops & switch boards on walls) in min 20 mm
HMS PVC conduit / casing n caping with 1.5 sq.mm. (2+1E) FRLSH
grade copper wires, modular type switch, earthing and required
accessories as per specification no. WG-HW
32 Point wiring for light/bell/exhaust fan in PVC trunking (casing-capping) 1.7.19 552.00
with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch,
earthing and required accessories as per specification no. WG-PW/SW
33 Point wiring for ceiling fan in PVC trunking (casing-capping) with 1.5 1.7.20 610.00
sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing
and required accessories as per specification no. WG-PW/SW
34 2 Way Point wiring for light in Stair Case in PVC trunking (casing- 1.7.19+N 828.00
capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular
type switch, earthing and required accessories as per specification no.
WG-PW/SW
35 Secondary point wiring for additional light/bell point in min 20mm 1.7.22 204.00
PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire with
required accessories as per specification no. WG-PW/SW
36 Wiring for plug on board with switch socket surface/concealed type, 1.7.26 386.00
copper wiring and earthing and with modular accessories as per
specification no. WG-PW/CW
37 Supplying and ercting 3 NOS 20-24 W LED TRACK LIGHTS WITH 1M NCSR 3479.00
LONG TRACK (70W) similar to PHILIPS MAKE, ST030T LED20/830 23W
220-240V I NB WH complete at position with minimum 2 years
warranty. NCSR (RA Attached)
38 Supplying and erecting decorative pre-wired box type fitting / batten 2.1.1 281.00
suitable for 4 feet, T8 LED tube light (excluding tube light).
39 Supplying and erecting LED square / circular Max. 12 W down lighter / 2.1.4 1213.00
Panel Light having pressure die-cast aluminium housing, polystyrene
diffuser having system lumens output of Min. 1500 Lumens, min.
efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120
deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-
40 Supplying and erecting LED square / circular Max. 20 W down lighter / 2.1.6 1951.00
Panel Light having pressure die-cast aluminium housing, polystyrene
diffuser having system lumens output of Min. 2750 Lumens, min.
efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120
deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-
41 Supplying and erecting LED Panel Light (600mm X 600mm) Max. 30 W 2.1.7 2524.00
having CRCA powder coated housing, polystyrene diffuser having
system lumens output of Min. 3600 Lumens, min. efficacy of 120
lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max.
ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge
42 Supplying & erecting inverter LED Panel Light 10-12-15W , heat sink, NCSR 1367.00
integrated HF electronic driver, Min. 2600 mA Lithium ion Battery with
charging time of 8-10 Hours and backup time of Min. 3 Hrs with
minimum 25% of initial Watts having luminous efficacy of 100
lumen/watt, CRI>80, CCT of 6500K and THD<=20 % having useful life of
43 Supplying, erecting, testing and commissioning of CHANDELIER (12 x NCSR 271125.00
5W) similar to MODEL:CELESTE, JAQUAR MAKE, 630MM DIA X 930MM
HEIGHT with asfour almaaza crystal, chrome finished with necessary
arrangement for erection, etc. NCSR (RA Attached)
44 Making suitable size recess in any type of false ceiling for erection of 2.1.13 78.00
flush type down lighter and finishing the background to match the
original surface upto 20W as per specification No. FG-IDF/LED.
45 Making suitable size of recess in any type of false ceiling for erection of 2.1.14 134.00
flush type LED panel light 600mm x 600mm / 1200x300mm and
finishing the background to match the original ceiling surface as per
specification No. FG-IDF/LED.
46 Supplying and erecting Bulk Head LED fitting Max. 10W with high 2.1.15 1416.00
transitivity diffuser with system lumens output of Min. 1100 lumens,
min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of
120 deg., THD<10%, p.f. >0.95, operating range of 140-260V, in built
surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50, IP66, IK09
47 Supplying and erecting anodized aluminium mirror light LED fitting (2 2.1.16 433.00
feet) Max. 12W with high transitivity diffuser with min. system lumens
output of 1200 lumens, min. efficacy of 100 lumen/W, CRI>80, CCT
upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<20%, p.f. >0.95,
operating range of 200-270V, surge protection of 2 kV, Life class of
48 Supplying and erecting Dimmable LED square / circular Max. 20-23-24 NCSR 4193.00
W down lighter / Panel Light having pressure die-cast aluminium
housing, polystyrene diffuser having system lumens output of Min.
2750 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K,
Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95,
49 Supplying & erecting inverter LED batten 20W tube light fitting with 2.1.22 1114.00
polycarbonate housing, heat sink, integrated HF electronic driver, Min.
2600 mA Lithium ion Battery with charging time of 8-10 Hours and
backup time of Min. 3 Hrs with minimum 25% of initial Watts having
luminous efficacy of 100 lumen/watt, CRI>80, CCT of 6500K and
50 Supplying and erecting ding dong / electronic musical type call bell 2.3.13 140.00
with heavy duty coil suitable to operate on 230V A.C. supply erected on
polished double wooden block / sunmica block of suitable size.
51 Supplying and erecting Concealed type foot/step light Max. 5W 2.4.23 3836.00
having IP67, IK10 rated Pressure die cast housing having system lumens
output of Min. 500 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT
upto 5000K, Beam Angle of 110 deg., THD<10%, SDCM<5, p.f. >0.95,
operating range of 230-270V, surge protection of 2.5 kV, Life class of
52 Supplying & erecting ready to use Retrofit T8 LED, 18 / 20 watt tube 2.8.14 627.00
light with polycarbonate body, heat sink, integrated HF electronic
driver complete & compatible to T8 / T12 LED luminaire by
disconnecting starter & ballast if necessary as per specification No. FG-
LP/RET.
53 Supplying & erecting aviation obstruction light minimum up to 48 watt 2.9.1 4825.00
consisting of yellow painted die-cast aluminium alloy housing with
integral LED aviation light comprising of aluminium housing with
polycarbonate enclosure complete as per specification No. FG-AV.
54 Supplying and erecting regular/ standard model ceiling fan of 900 2.10.2 2092.00
/1050 mm. sweep complete erected in position as per specification no.
FG-FN/CF.
55 Supplying and erecting regular/ standard model ceiling fan of 1400mm. 2.10.3 2275.00
sweep complete erected in position as per specification no. FG-FN/CF.
56 Providing and erecting bracket fan 400 mm. sweep A. C. 230 volts 50 2.10.4 2440.00
cycles 1350 R.P.M. Oscillating type, plastic or metal blades chrome
plated guard with regulator and moisture proof treatment to winding
and with ‘E’ class insulation.
57 Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 2.10.14 1464.00
225 mm. 1400 RPM with condenser complete erected in position with
necessary materials. Fan motor with moisture proof treatment and ‘E’
class insulation.
58 Supplying and erecting exhaust fan heavy duty 230 V A.C. 50 cycles 2.10.17 3976.00
375/380 mm. 1400 RPM complete erected in position as per
specification no. FG-FN/EXF
59 Supplying and erecting Energy Saving Ceiling fan of 3 star rating as per 2.10.21 2397.00
BEE 230 V A.C. 50 cycles 1200 mm complete erected in position as per
specification no. FG-FN/CF
60 Supplying & fixing anchor type fastener fan hook, with 2 nos. of 10 mm 2.11.2 103.00
dia x 75 mm long with necessary materials for ceiling fan. (FOR C FANS-
170 + CABLE TRAY SUPPORTS-26 = 196 NOS)
61 Supplying and erecting ‘B’ grade G.I. pipe / M.S. pipe down rod duly 2.11.6 229.00
painted for fan complete erected with PVC three core flexible cable 1
sq. mm copper PVC wire. (800 mm long per Fan)
62 Providing recess in brick wall suitable for erection of exhaust fan up to 2.11.11 381.00
450mm. sweep complete with grouting of nut, bolts, plastering and
colour washing to match the colour of the wall for the wall thickness of
225 mm.
63 Supplying & erecting 22 SWG G.I sheet metal cawl sector shaped with 2.11.15 1194.00
25 x 25 x 3 (mm) angle iron frame, metal mesh to avoid birds entry with
necessary material, suitable for exhaust fan of 400 mm as per
specification no FG-FAS/MSC.
64 Supplying and erecting storage type water heater 50 litres capacity 3.1.4 15881.00
having standing loss < 0.614 kWh/24hour/45°C, high impact resistance
engineering plastic body with anti corrosive high grade steel inner
tank heating element having hard water & corrosion protection, with
minimum 3 safety protections (i.e. thermostat &thermal function
65 Providing fibre reinforced pvc flexible pipe upto 1m length with brass 3.1.11 189.00
locking nuts and washers and clips at both ends suitable for hot water
and cold water both (1 set of 2 nos) complete.
66 Supplying, erecting, testing and commissioning self contained water 3.3.8 34549.00
cooler 230/250V 50 cycles nominal cooling capacity of 40 litres per
hour and storage capacity 80 litres with partially stainless steel body As
per specification No. APWCR/ WC
67 Supplying, erecting, testing and commissioning self contained water 3.3.10 53284.00
cooler 230/250 Volts 50 cycles nominal cooling capacity of 150 litres
per hour and storage capacity 150 litres with partially stainless steel
body as per specification No. AP-WCR/WC
68 Supplying and erecting ultra violet storage type water purifier 3.5.1 15891.00
( RO+UV+UF) with softener for safe drinking water consisting of UV
germicidal tube of 8W capacity choke made of copper wire and two
indicator lamps with output of purified water minimum 0.33 litre/min
with activated carbon filter and softener operating on 230 V single
69 Supplying, erecting & marking SP MCB 6A to 32A, C-series with rated 5.3.2 174.00
short - circuit breaking capacity (Icn) 10kA in provided distribution
board as per specification no. SW-MCB
70 Supplying, erecting & marking SP MCB 6A to 32A, B-series with rated 5.3.3 173.00
short - circuit breaking capacity (Icn) 10kA in provided distribution
board as per specification no. SW-MCB
71 Supplying, erecting & marking DP MCB 6A to 32A, C-series with rated 5.3.6 535.00
short - circuit breaking capacity (Icn) 10kA in provided distribution
board as per specification no. SW-MCB
72 Supplying, erecting & marking DP MCB 6A to 32A, B-series with rated 5.3.7 510.00
short - circuit breaking capacity (Icn) 10kA in provided distribution
board as per specification no. SW-MCB
73 Supplying, erecting & marking TP MCB 6A to 32A, with rated short - 5.3.10 751.00
circuit breaking capacity (Icn) 10kA in provided distribution board as
per specification no. SW-MCB
74 Supplying, erecting & marking TP MCB 40A to 63A, with rated short - 5.3.11 992.00
circuit breaking capacity (Icn) 10kA in provided distribution board as
per specification no. SW-MCB
75 Supplying, erecting & marking FP MCB 6A to 32A, with rated short - 5.3.12 1059.00
circuit breaking capacity (Icn) 10kA in provided distribution board as
per specification no. SW-MCB
76 Supplying, erecting & marking FP MCB 40A to 63A, with rated short - 5.3.13 1329.00
circuit breaking capacity (Icn) 10kA in provided distribution board as
per specification no. SW-MCB
77 Supplying & erecting triple pole and neutral distribution board 5.4.1 2356.00
(TPNDB), SPMCB of 4 ways/phase (12 poles), with door, 1.2mm
thickness, surface/flush mounted, IP 43 protection on provided iron/GI
frame (horizontal busbar type) as per specification no. SW-MCBDB.
78 Supplying & erecting triple pole and neutral distribution board 5.4.4 4650.00
(TPNDB), SP/TP MCBs total 4 ways/12 Poles, with door, 1.2mm
thickness surface/flush mounted, IP 43 Protection on provided iron/GI
frame (vertical busbar type) as per specification no. SW-MCBDB.
79 Supplying & erecting triple pole and neutral distribution board 5.4.5 5696.00
(TPNDB), SP/TP MCBs total 8 ways/24 poles, with door, 1.2mm
thickness surface/flush mounted, IP 43 Protection on provided iron/GI
frame (vertical busbar type) as per specification no. SW-MCBDB.
80 Supplying and erecting single pole and neutral distribution board 5.4.8 1244.00
(SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing
SP MCBs, with door, 1.2mm thickness surface/flush mounted, IP 43
Protection on provided iron/GI frame as per specification no. SW-
MCBDB
81 Supplying and erecting single pole and neutral distribution board 5.4.9 1495.00
(SPNDB), with 2 ways for incoming and 8 ways (8 poles) for outgoing
SP MCBs, with door, 1.2mm thickness surface/flush mounted, IP 43
Protection on provided iron/GI frame as per specification no. SW-
MCBDB
82 Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm 5.4.13 400.00
thickness suitable for DP MCB/TP MCB/FP MCB/RCCB/RCBO complete
erected on provided angle iron/GI frame.
83 Supplying & erecting triple pole and neutral distribution board 5.4.15 6568.00
(TPNDB), 3 pole MCCB as incomer & outgoing SP MCB (12 poles) or TP
MCB of 4 ways (12 poles), with door, 1.2mm thickness, surface/flush
mounted, on provided iron/GI frame (vertical busbar type) as per
specification no. SW-SWR/MCBDB1
84 Supplying & erecting triple pole and neutral distribution board 5.4.16 7791.00
(TPNDB), 3 pole MCCB as incomer & outgoing SP MCB (24 poles) or TP
MCB of 8 ways (24 poles), with door, 1.2mm thickness, surface/flush
mounted, on provided iron/GI frame (vertical busbar type) as per
specification no. SW-SWR/MCBDB1
85 Supplying & erecting triple pole and neutral distribution board 5.4.17 10240.00
(TPNDB), 3 pole MCCB as incomer & outgoing SP MCB (36 poles) or TP
MCB of 12 ways (36 poles), with door, 1.2mm thickness, surface/flush
mounted, on provided iron/GI frame (vertical busbar type) as per
specification no. SW-SWR/MCBDB1
86 Providing & erecting 4 Pole MCCB, 415V, up to 32/40/63/100 A, rated 5.5.1+N 6370.80
short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable
thermal (overload) setting and fixed magnetic setting with provided
leads, provision for installation of shunt/UV/trip alarm contact. MCCB
with phase barriers on both sides, insulation withstand capacity 800V,
87 Providing & erecting 4 Pole MCCB, 415V, 160/200 A, rated short-circuit 5.5.2+N 12724.80
breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal
(overload) setting and adjustable magnetic setting with provided leads,
provision for installation of shunt/UV/trip alarm contact. MCCB with
phase barriers on both sides, insulation withstand capacity 800V, no
88 Providing & erecting 4 Pole MCCB 415V, 250A, rated short-circuit 5.5.4+N 16990.80
breaking capacity 36 kA (Ics=100% of Icu) adjustable thermal (overload)
setting and adjustable magnetic setting with provided leads, provision
for installation of shunt/UV/trip alarm contact. MCCB should have
phase barriers both sides, with insulation withstand capacity 800V, no
89 Supplying, fixing and commissioning 2 pole RCBO up to 25A, with 5.6.9 2986.00
overcurrent, rated short-circuit breaking capacity (10 kA) and earth
leakage protection, with 30/100/300 mA sensitivity and short circuit
and earth leakage trip indication as per specification no SW-RCBO.
90 Supplying, fixing and commissioning 4 pole RCBO up to 25A, with 5.6.12 3978.00
overcurrent, rated short-circuit breaking capacity (10 kA) and earth
leakage protection, with 30/100/300 mA sensitivity and short circuit
and earth leakage trip indications per specification no SW-RCBO.
91 Supplying, fixing and commissioning 4 pole RCBO 32/40A, with 5.6.13 4047.00
overcurrent, rated short-circuit breaking capacity (10 kA) and earth
leakage protection, with 30/100/300 mA sensitivity and short circuit
and earth leakage trip indication as per specification no SW-RCBO.
92 Providing, erecting & commissioning 4 pole RCCB 40A, with added 5.6.15 5566.00
immunity to avoid DC pulse tripping with 30/100/300 mA sensitivity
complete as per specification no. SW-RCCB.
93 Providing & erecting floor/wall mounting, MCCB panel board, with 5.7.3 45392.00
door, suitable for 4 pole incoming 250A, 6 ways 4 pole outgoing, up to
100A MCCBs on iron frame, as per specification no SW-MCCBPB.
(Excluding MCCBs)
94 Providing & erecting floor/wall mounting, MCCB panel board, with 5.7.4 50214.00
door, suitable for 4 pole incoming 250A, 8 ways 4 pole outgoing, up to
100A MCCBs on iron frame, as per specification no SW-MCCBPB.
(Excluding MCCBs)
95 Providing & erecting incoming and outgoing cable alleys suitable for 5.7.13 16647.00
MCCB panel board with door, 250A incoming and 6 way outgoing or
400A incoming and 4 way outgoing made from CRCA sheet 1.6 mm
thick duly powder coated and having vertical insulated partition for
shielding between the shared face of cableway and DB complete.
96 Providing & erecting incoming and outgoing cable alleys suitable for 5.7.14 18316.00
MCCB panel board with door, 250A incoming and 8 way outgoing or
400A incoming and 6 way outgoing made from CRCA sheet 1.6 mm
thick duly powder coated and having vertical insulated partition for
shielding between the shared face of cableway and DB complete.
97 Providing & erecting prewired meter module suitable for MCCB panel 5.7.17 13868.00
board with CTs and emfs VIF meter.
98 Supplying and erecting terminal spreaders suitable for 3 pole, upto 5.11.1 199.00
250A MCCB (set of 6)
99 Supplying and erecting terminal spreaders suitable for 3 pole, upto 5.11.2 940.00
400A MCCB (set of 6)
100 Supplying and erecting terminal spreaders suitable for 4 pole, upto 320 325.00
100A MCCB (Set of 8)
101 Supplying and erecting terminal spreaders suitable for 4 pole, upto 1164 1169.00
250A MCCB (Set of 8)
102 Supplying and erecting iron work, sheet metal work consisting of MS 6.1.19 186.00
sheets, various sections of iron, plates, chequered plates, rods,
bars, MS pipes, etc. for panel board or any other purpose with
bending, cutting, drilling and welding complete erected at the
position with necessary materials duly painted with one coat of red
103 Supplying and erecting 150 kVAr, 3 phase, 50 Hz., Power contactors 6.7.15 548813.00
Derated for microprocessor APFC controller with MPP / APP type
capacitor with 525 V and having minimum overcurrent capacity of 1.8
In, peak inrush current capacity 300 In and minimum life 150000 hours
with , consisting of suitable steps of MPP/APP type capacitor units with
104 Supplying, erecting & terminating FRLS XLPE insulated, galvanised 7.1.32+N 429.45
steel formed wire armoured (strip) cable, 1100 V 4 core 50 sq. mm.
aluminium conductor complete erected with glands & lugs on wall/
trusses/pole or laid in provided trench/ pipe as per specification no.
CB-LT/AL
105 Supplying, erecting & terminating FRLS XLPE insulated, galvanised 7.1.33+N 563.85
steel formed wire armoured (strip) cable, 1100 V 4 core 70 sq. mm.
aluminium conductor complete erected with glands & lugs on wall/
trusses/pole or laid in provided trench/ pipe as per specification no.
CB-LT/AL
106 Supplying, erecting & terminating FRLS XLPE insulated, galvanised 7.1.34+N 697.20
steel formed wire armoured (strip) cable, 1100 V 4 core 95 sq. mm.
aluminium conductor complete erected with glands & lugs on wall/
trusses/pole or laid in provided trench/ pipe as per specification no.
CB-LT/AL
107 Supplying, erecting & terminating FRLS XLPE insulated, galvanised 7.1.35+N 852.60
steel formed wire armoured (strip) cable, 1100 V 4 core 120 sq. mm.
aluminium conductor complete erected with glands & lugs on wall/
trusses/pole or laid in provided trench/ pipe as per specification no.
CB-LT/AL
108 Supplying, erecting & terminating FRLS XLPE insulated, galvanised 7.1.38+N 1613.85
steel formed wire armoured (strip) cable, 1100 V 4 core 240 sq. mm.
aluminium conductor complete erected with glands & lugs on wall/
trusses/pole or laid in provided trench/ pipe as per specification no.
CB-LT/AL
109 Supplying, erecting & terminating FRLS XLPE insulated, galvanised 7.2.8+N 146.88
steel wire armoured (round) cable 1100 V, 2 core 2.5 sq. mm. copper
conductor complete erected with glands & lugs, on wall/ trusses/ pole
or laid in provided trench/ pipe as per specification no. CB-LT/CU
110 Supplying, erecting & terminating FRLS XLPE insulated, galvanised 7.2.9+N 198.90
steel wire armoured (round) cable 1100 V, 2 core 4 sq mm copper
conductor complete erected with glands & lugs, on wall/ trusses/pole
or laid in provided trench/ pipe as per specification no. CB-LT/CU
111 Supplying, erecting & terminating FRLS XLPE insulated, galvanised 7.2.10+N 250.92
steel wire armoured (round) cable 1100 V, 2 core 6 sq mm copper
conductor complete erected with glands & lugs, on wall/ trusses/pole
or laid in provided trench/ pipe as per specification no. CB-LT/CU
112 Supplying, erecting & terminating FRLS XLPE insulated, galvanised 7.2.31+N 302.94
steel wire armoured (round) cable 1100 V, 4 core 4 sq. mm. copper
conductor complete erected with glands & lugs, on wall/ trusses/ pole
or laid in provided trench/ pipe as per specification no. CB-LT/CU
113 Supplying, erecting & terminating FRLS XLPE insulated, galvanised 7.2.32+N 403.92
steel wire armoured (round) cable 1100 V, 4 core 6 sq. mm. copper
conductor complete erected with glands & lugs, on wall/ trusses/ pole
or laid in provided trench/ pipe as per specification no. CB-LT/CU
114 Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel 7.2.33+N 615.06
formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copper
conductor complete erected with glands & lugs, on wall/ trusses/ pole
or laid in provided trench/ pipe as per specification no. CB-LT/CU
115 Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel 7.2.34+N 880.26
formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. copper
conductor complete erected with glands & lugs, on wall/ trusses/ pole
or laid in provided trench/ pipe as per specification no. CB-LT/CU
116 Supplying and laying (including excavation of suitable width & depth 7.6.9 210.00
up to 90 cm) 50 mm outside dia. double wall corrugated pipes
(DWC) of HDPE for enclosing cable below ground/road surface,
complete.(For Cales to laid on Terrace)
117 Providing & erecting hot dipped galvanised ladder type cable tray 7.11.3 854.00
manufactured from 16 SWG GI sheet of 300 mm width & 100 mm
height with required standard accessories.
118 Providing & erecting hot dipped galvanised perforated type cable tray NCSR AS PER CSR 23-24 676.00
manufactured from 16 SWG GI sheet of 200 mm width & 75 mm 7.11.7
height complete with necessary coupler plates & hardware.
119 Providing & erecting hot dipped galvanised perforated type cable tray NCSR AS PER CSR 23-24 846.00
manufactured from 16 SWG GI sheet of 300 mm width & 75 mm 7.11.8
height complete with necessary coupler plates & hardware.
120 Providing & erecting hot dipped galvanised cover suitable for 7.11.12 455.00
ladder/perforated type Cable tray manufactured from 18 SWG (1.2
mm thick) GI sheet of 200 mm width & 20 mm height complete with
necessary hardware.
121 Providing & erecting hot dipped galvanised cover suitable for 7.11.13 626.00
ladder/perforated type Cable tray manufactured from 18 SWG GI
sheet of 300 mm width & 20 mm height complete with necessary
hardware.
122 Supplying, installing and testing earthing with galvanized iron earth 9.1.3 6055.00
plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering
and brick masonry block C.I. cover complete with all accessories of G.I.
materials & recording the results as per specification no. EA-EP
123 Supplying and erecting GI strip of required size used for earthing on wall 9.2.3 236.00
and/or any other purpose with necessary GI clamps fixed on wall
painted with bituminous paint in an approved manner with joints
required as per specification no EA-EP. G.I.Strip for Earthing - (Size:
25x3 mm ... 24 m x 0.59 kg/m = 14.16 kgs SAY 14 KGS
125 MAIN PANEL BOARD: NCSR 450000.00
Design,fabrication,assembling,supply,installation,testing and
commissioning of cubicle type LT panels suitable for 415 V 3 phase , 4
wire 50 Hz AC supply system fabricated in compartmentised design
from CRCA sheet steel of 2 mm thick for frame work IP 52 and covers, 3
126 MAIN EMERGENCY PANEL BOARD NCSR 250000.00
Design,fabrication,assembling,supply,installation,testing and
commissioning of cubicle type LT panels suitable for 415 V 3 phase , 4
wire 50 Hz AC supply system fabricated in compartmentised design
from CRCA sheet steel of 2 mm thick for frame work IP 52 and covers, 3
LIFT WORK
5 For Lift having 1000 mm wide x 2000 mm high clearance in Add On I No A 4 PF 274 146107.00
1.5 mm thick SS 304 grade landing door entrance in
1.5mm thick SS 304 grade landing door [Two panel], this
includes all necessary accessories like LOP's with UP/DN
buttons-arrows-indicators, extension of guide rails, shaft
wiring with trunking, traveling cables, main hoisting
ropes/belts, & OSG rope landing doors with all accessories
etc. necessary for the normal safe functioning of lift
installation complete. (As per Add On A 4, item no 4 Pg
274 for 20 Passenger Lifts) (2 Lift x 2 floors = 4 Floors)
6 For Lift having 1700 mm wide x 2000 mm high clearance in Add On I No A 10 CSR 213700.00
1.5 mm thick SS 304 grade landing door entrance in 2021-22 Pg 284
1.5mm thick SS 304 grade landing door [Two panel], this
includes all necessary accessories like LOP's with UP/DN
buttons-arrows-indicators, extension of guide rails, shaft
wiring with trunking, traveling cables, main hoisting
ropes/belts, & OSG rope landing doors with all accessories
etc. necessary for the normal safe functioning of lift
installation complete. (As per Add On A 10, item no 4 Pg
271 Passenger Lifts) (1 Lift x 3 floors = 4 Floors)
7 Add For Lift Car Door having clear entrance 1700 mm wide Add On I No G A3, CSR 126415.00
x 2000 mm high . (As per Add On G-A 3, item no 4 Pg 2021-22 Pg 277
277 Passenger Lifts) (1 Lift Car Door)
8 Add For Lift Landing Door having clear entrance 1700 mm Add On I No G B3, CSR 28654.00
wide x 2000 mm high . (As per Add On G-B 3, Pg 277 2021-22 Pg 277
Passenger Lifts) (3 Lift Landing Doors)
LIGHTENING ARRESOTRS
2 Supplying and erecting copper strip of required size used 9.2.7 1164.00
for earthing on wall and/or any other purpose with
necessary copper clamps fixed on wall painted with
insulating and non-corrosive bond with required joints as
per specification no. EA-EP.
Copper Strip 25x5 mm..1.15 kg/m Total Length - (334 m x
1.15 kg/m = 940.70 kg, Say 941 kgs)
1 Supplying, erecting, testing & commisioning GI sheet 1.6 mm (16 SWG) 6.1.15 135.00
caution board of size 200 x 150 mm duly painted with red oxide and
enamel paint in marathi and hindi erected at position for medium
voltage (415 Volt) erecting with compliance to IS 2551-1982 as per
specification no. CP/SH/CR (6-1-15)
2 Supplying, erecting, testing & commisioning GI sheet 1.6mm (16 SWG) 6.1.16 192.00
caution board of size 250 x 200 mm duly painted with red oxide and
enamel paint in marathi and hindi erected at position for HV/EHV
(11000 Volts) erecting with compliance to IS 2551-1982. as per
specification no. CP/SH/CR (6-1-16)
4 Supplying, erecting, testing & commisioning 150 kVAr, 3 phase, 50 Hz., 6.7.15 548813.00
APFC Panel with derated power contactor of suitable rating for
capacitor switching Application for each step controlled by
microprocessor based APFC relay consisting of
2,3,5,5,10,10,15,20,30,50 with MPP /APP type capacitor with 525 V and
having minimum overcurrent capacity of 1.8 In, peak inrush current
capacity 300 In and minimum life 150000 hours with detuned
aluminium wound reactor of 7/ 14% for each step, APFC Panel shall
suitable rating MCCB as incomer and each branch/step shall have
separate isolation with MCCB/MCB of Suitable rating for protection,
compliance to IEC 61439 and power quality IEC 61921 standard as per
specification no. CP-ED/APFC. (6-7-15)
5 Supplying, erecting & terminating FRLS XLPE insulated, galvanised 7.1.38+N 1613.85
steel formed wire armoured (strip) cable, 1100 V 4 core 240 sq. mm.
aluminium conductor complete erected with glands & lugs on wall/
trusses/pole or laid in provided trench/ pipe as per specification no.
CB-LT/AL (7-1-38+N)
6 Supplying, erecting & terminating FRLS XLPE insulated, galvanised 7.1.40+N 2388.75
steel formed wire armoured (strip) cable, 1100 V 4 core 400 sq. mm.
aluminium conductor complete erected with glands & lugs on wall/
trusses/pole or laid in provided trench/ pipe as per specification no.
CB-LT/AL (7-1-40+N)
7 Supplying , erecting & terminating XLPE insulated, galvanised steel 7.3.3+N 1966.08
formed wire armoured (ROUND) cable 11 kV(E), 3 x 120 sq. mm.
aluminium conductor laid in provided trench / pipe as per specification
no. CB-HT (7-3-3+N)
8 Providing and erecting Heat shrinkable indoor termination kit for 11 7.5.2 10474.00
KV (E) XLPE HT cable 3x120 to 185 sq. mm. with necessary material as
per specification no. CB-JT/HT (7-5-2)
9 Providing and erecting Heat shrinkable outdoor termination kit for 11 7.5.6 13124.00
KV (E) XLPE HT cable 3x120 to 185 sq. mm. with necessary material as
per specification no. CB-JT/HT (7-5-6)
10 Supplying & erecting G.I. pipe ‘A’ class 75 mm dia. for enclosing XLPE 7.6.4 672.00
armoured cable on wall/pole as per specification no. CB-CE (7-6-4)
11 Supplying & laying (including excavation) reinforced cement concrete 7.6.5 569.00
pipe of NP-2 class of 150 mm diameter in proper line, level and slope
including providing and fixing collars in cement mortar 1:2 and curing
etc. complete.(7-6-5)
12 Supplying & laying (including excavation) half round reinforced cement 7.6.6 508.00
concrete pipe of NP-2 class of 150 mm diameter in proper line, level
and slope including providing and fixing collars in cement mortar 1:2
and curing etc. complete.(7-6-6)
13 Supplying and laying (including excavation of suitable width & depth up 7.6.12 392.00
to 90 cm) 120 mm outside dia. double wall corrugated pipes (DWC) of
HDPE for enclosing cable below ground/road surface, complete. (7-6-
12)
14 Supplying, installing and testing earthing with galvanized iron earth 9.1.3 6055.00
plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering
and brick masonry block C.I. cover complete with all accessories of G.I.
materials & recording the results as per specification no. EA-EP (9-1-3)
QTY AS PER EARTHING DETAILS
15 Supplying, installing and testing earthing with copper earth plate size 9.1.6 15734.00
60 x 60 x 0.315 cm with funnel with a wire mesh for watering and brick
masonry block C.l. cover with minimum 25 kg Carbon based
environment friendly back fill ground ehancing compound complete
with all accesories of copper materials & recording the results as per
specification no EA-EP/EF (9-1-6) QTY AS PER EARTHING DETAILS
16 Supplying and erecting copper strip of required size used for earthing 9.2.2 883.00
on wall and/or any other purpose with necessary copper clamps fixed
on wall painted with bituminous paint in an approved manner with
joints required. As per specification no. EA-EP. (SIze: 25x5 mm... 66 m x
1.15 kg/m = 75.90 kgs SAY 76 KGS)(9-2-2)
17 Supplying and erecting GI strip of required size used for earthing on 9.2.3 222.00
wall and/or any other purpose with necessary GI clamps fixed on wall
painted with bituminous paint in an approved manner with joints
required. As per specification no EA-EP. (Size: 25x3 mm ... 66 m x 0.59
kg/m = 38.94 kgs SAY 39 KGS (9-2-3)
18 Supplying, installing, testing & commissioning compact substation with 10.4.2 2185158.00
3 phase, 11/0.433 kV, 50 Hz., 500 kVA, Mineral Oil immersed Copper
wound, without gas cushioning, hermetically Sealed transformer
having indoor type transformer bushings, with HT side (incoming side)
Circuit Breaker of appropriate rating & capacity and LT side (outgoing
side) MCCBs (4 pole) of appropriate capacity, with inbuilt metering
cubical having 3 epoxy coated CT's with CT Ratio ......./5 A, 10 or 15VA
Burden, 0.5S Accuracy Class, & 3 epoxy coated PT's with PT Ratio
11/0.110KV, 10 or 15 VA Burden, 0.5S Accuracy Class properly arranged
in standard MSEDCL approved enclosure, using type A winding
insulation (kraft paper),standard accessories complete with test
certificate with losses below 1510 Watts at 50% load, 4300 Watts at
100% load for transformer, as per IS:1180 (part 1) : 2014 , with
necessary permissions of Electrical Inspectors, as per specification no
SS-TR-CS (10-4-2)
19 Supplying and erecting fencing of section having size 2450 mm in height 10.6.18 6857.00
from ground level and 1200 mm width with angle iron frame work
erected in CC foundation and painted complete as per specification no
SS-AS/FSG (Fencing details mentioned in Drawing)(10-6-18)
20 Supplying and erecting fencing of section having size 2450 mm in height 10.6.18+N 6457.00
from ground level and 1000 mm width with angle iron frame work
erected in CC foundation and painted complete as per specification no
SS-AS/FSG (Rate reduced as per Note.. 6857.00 - 400.00 = 6573.00)
(Fencing details mentioned in Drawing)(10-6-18)
21 Supplying and erecting fencing of section having size 2450 mm in height 10.6.18+N 6057.00
from ground level and 800 mm width with angle iron frame work
erected in CC foundation and painted complete as per specification no
SS-AS/FSG (Rate reduced as per Note.. 6857.00 - 800.00 = 6173.00)
(Fencing details mentioned in Drawing)(10-6-18)
22 Supplying and erecting fencing of section having size 2450 mm in height 10.6.18+N 5857.00
from ground level and 700 mm width with angle iron frame work
erected in CC foundation and painted complete as per specification no
SS-AS/FSG (Rate reduced as per Note.. 6857.00 - 1000.00 = 5973.00)
(Fencing details mentioned in Drawing)(10-6-18)
24 Supplying and erecting double leaf hinged door each 1500 mm in width 10.6.20 19632.00
x 1850 mm in height using B class, GI pipe with angle iron supports,
chain link wire mesh (jali) complete supported on channel iron, erected
in foundation, and painted complete as per specification no
SS-AS/DLD(10-6-20)
25 Providing printed instruction chart for treating persons suffering from 10.6.22 151.00
electric shock, printed in English & Marathi and duly laminated
complete.(10-6-22)
26 Providing pair of duly tested rubber hand gloves as per IS :47705 10.6.23 681.00
suitable for working upto 22 kV supply complete.(10-6-23)
27 Supplying standard first aid box with necessary antiseptic cream, 10.6.24 888.00
medicine for use on wounds due burn, crepe bandage, gauge bandage,
medicated ready to use bandage (Band-Aid) adhesive tape for
medicinal use, scissors, anti-septic solution, etc. (All above contents
shall be of standard makes)(10-6-24)
28 Supplying and fixing PVC synthetic elastomer electrically insulating 10.6.25 5131.00
mat with class A insulation conforming to IS: 15652 – 2006 having 2
mm thickness upto 3.3 kV (10-6-25) (2 SQM x 2 NOS)
29 Supplying and fixing PVC synthetic elastomer electrically insulating 10.6.26 5874.00
mat with class B insulation conforming to IS: 15652 – 2006 having 2.5
mm thickness upto 11 kV (10-6-26)
30 Providing Round bottom fire bucket of 9 Litres capacity as per IS : 2546 10.3.24 OF CSR 2021-22 481.95
made out of 24 gauge G.I. sheet with extra handle at bottom duly
painted white inside and red outside with FIRE Mark on provided
stand/ wall hook complete. (Transformer- 4 Nos & DG Set- 4 Nos)(10-6-
24) (Rate adopted as per CSR 2021-22)
31 Providing Floor mounting stand for keeping 4 Nos. of FIRE buckets 10.6.24 OF CSR 2021-22 3698.10
1500mm in length 900mm in height frame made out of 30x30x4 mm
angle iron with cross supports for legs welded with 4 hooks and duly
painted with one coat of red lead and two coats of silver paint
complete.(10-6-25)(Rate adopted as per CSR 2021-22)
32 Supplying, erecting, testing and commissioning of diesel generating set 11.1.19 2469023.00
with alternator of 320 kVA output continuous rating, 3 phase, 415 V,
50 Hz, 0.8 p.f., A.C. supply, a totally enclosed air cooled / liquid cooled
multi-cylinder diesel engine developing suitable BHP at 1500 rpm with
10% overload for 1 hour in 12 hours, along with standard accessories,
self-excited, self-regulated, screen protected alternator with static
excitation system running at 1500 RPM as per IS 4722-2001 with
voltage regulation +/- 5 %, with performance class G2/G3 and
maximum fuel consumption 54.89 ltr/hr @75% loading. Both the
engine and alternator direct coupled on a common fabricated steel
base frame and mounted on anti-vibrating pads, with standard control
panel comprising meters, switchgears, indicators connected with
suitable wires/cables, the complete set enclosed in composite acoustic
enclosure as fully assembled integral unit made of 16 SWG CRCA sheet,
sound absorbing material to restrict sound level up to 75 dB at 1.0 m,
provided with first filling of oil, diesel not less than 480 ltr etc., on
provided M20 grade CC foundation and obtaining necessary approval
from Electrical Inspector as per specification no. GEN-DG (11-1-19)
33 Supplying, erecting, testing and commissioning of microprocessor 11.2.16+N 282626.10
based AMF panel suitable for Diesel generating set of above 250 kVA
upto 320 kVA capacity 3 phase, 415 V, 50 Hz, A.C. supply with all
standard features, safeties etc as per specification no. GEN-AMF. (11-2-
16+N)
34 Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. 13.15.1 9902.00
capacity cartridge type conform to IS 2878 /15683 complete erected
with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts
routed in wall complete. (13-15-1)
35 Excavating Hard murum/Stone metal road by chiselling for preparing 16.1.7 232.00
pit for poles stay or earth plates or for laying cables, pipes & clearing
the site by removing debris & making the site as required complete.
(16-1-7)
CSS : 4.0x2.5x1.0 M = 10 CUM
DG SET : 6.0x2.5x1.0 M = 15 CUM
36 Supplying and spreading stone metal 25mm size for 100mm depth 16.2.3 102.00
above the ground level complete. (16-2-3)
37 Making Cement concrete foundation in 1:2:4 cement concrete with 16.3.5 5011.00
foundation bolts and nuts complete. (cost of wooden box is included)
(for pumps). (16-3-5)
CSS : 3.8x2.3x0.7 M = 6.118 SAY 6.20 CUM
DG SET : 5.5x2.3x0.7 M = 8.855 SAY 9.0 CUM
38 Provision for service connection charges towards Extention of Load NCSR 746000.00
(Additional Load) to MSEDCL and Road/Foot Path Cutting Charges to be
paid to Local Municipality.(Charges considered as per Circular Dt:
7/4/2020 isssued by MSEDCL... Load Sanction Charges (Rs 2,20,000.00)
+ Underground HT Cable Service connection Charges (Rs 2,23,000.00) +
Processing Charges for HT (Rs 3000.00) + Rs 3,00,000.00 for Road
Cutting. Total Charges =Rs 746000.00)
CCTV
1 Supplying & erecting HMS PVC conduit 32mm dia. with necessary 1.1.11 180.00
accessories in wall/floor with chiselling appropriately as per
specification no. WG-MA/CC. (FOR LAYING CAT-6 CABLES THRU WALL)
2 Supplying & laying HMS PVC conduit 32mm dia. with necessary 1.1.12 157.00
accessories in RCC work/false ceiling/false flooring as per specification
no. WG-MA/CC. (FOR LAYING CAT-6 CABLES THRU FALSE CEILING)
3 Supplying and erecting PVC trunking (PVC casing-n-capping) of size 1.2.7 44.00
25 mm with accessories on wall/ceiling as per specification No: WG-
MA/CON.
4 Supplying and erecting PVC slotted box trunking of size 75x75 mm. 1.2.18 249.00
with accessories on wall/ceiling as per specification No:
WG-MA/SLBOX.
5 Supplying and erecting mains with 1x2.5 sq.mm FRLSH copper PVC 1.3.2+N 31.00
insulated wire laid as Earth WIre Green in Colour in provided
conduit/trunking/inside pole/Bus bars or any other places. as per
specification No: WG-MA/BW
6 Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC 1.3.3 89.00
insulated wire laid in provided conduit/trunking/inside pole/Bus bars or
any other places. as per specification No: WG-MA/BW
7 Supplying and erecting 5m HDMI cord low voltage grade minimum 4k 1.8.22 2259.00
compliant to be laid in provided conduits with male/female 19 pin
HDMI connectors complete.
8 Supplying and installing Cat-6 LSZH cable suitable for networking as per 1.10.2 66.00
specification no. WG-COC/NC
9 Supplying and fixing 1 m UTP patch cord of Cat 6 type in position as per 1.10.16 233.00
specification No. WG-COC/PC
10 Supplying and fixing 3 m UTP patch cord of Cat 6 type in position as per 1.10.19 335.00
specification No. WG-COC/PC
11 Supplying, installing and testing UTP connector (RJ-45) as per 1.12.1 79.00
specification No. WG-NAS/UTPC.
12 Supplying and fixing 24 port patch panel with tool-less keystone jacks 1.12.4 10616.00
in provided U Rack complete as per specification no. WG-NAS/PP
17 Supplying, erecting, testing & commissioning of 3 kVA capacity on line 3.7.3 49181.00
pure sine wave,PWM,IGBT based UPS with 0.8 to unity output pf ,single
phase input & 1 phase output complete with all protections as per
specification no. AP-UPS (Without batteries)
18 Supplying and erecting 12 V/65Ah SMF battery with battery terminal 3.8.11 7377.00
wire, duly charged complete with 24 months warranty complete
19 Events : Privacy Masking, Motion detection, Scene change detection, NCSR (RATES AS PER I. 10746.00
Face capture, Video tampering, audio exception detection, Region NO. 19.6.2 OF CSR 23-24)
entrance detection, Region exiting detection.
Operating temperature ( -30 to 60° C ) .
Security - User account and password protection, HTTPS, IP filter, IEEE
802.1X, digest authentication, user access log, TLS1.2, AES - 256,
SSH/Telnet closed, FTP disabled.
Protocol - DHCP, UDP, HTTP, HTTPS, NTP, DNS, RTP, RTSP, SMTP,
SSL/TLS, TCP/IP, Secure Real-Time Transport Protocol (SRTP), Bonjour,
SNMP and Secure shell (SSH) supported protocol.
RoHS, WEEE, ISO-14001 and REACH compliant, UL/EN OR equivalent
BIS/TECH/STQC or any indian standards as applicable, CE, FCC certified.
duly erected in position on wall/ceiling/false ceiling/provided pole
(mounting height not more than 5 meter) etc with all accessories etc
complete as per specification no. CCTV-CAM
Events : Privacy Masking, Motion detection, Scene change detection,
Face capture, Video tampering, audio exception detection, Region
entrance detection, Region exiting detection.
Operating temperature ( -30 to 60° C ) .
Security - User account and password protection, HTTPS, IP filter, IEEE
802.1X, digest authentication, user access log, TLS1.2, AES - 256,
SSH/Telnet closed, FTP disabled.
Protocol - DHCP, UDP, HTTP, HTTPS, NTP, DNS, RTP, RTSP, SMTP,
SSL/TLS, TCP/IP, Secure Real-Time Transport Protocol (SRTP), Bonjour,
SNMP and Secure shell (SSH) supported protocol.
RoHS, WEEE, ISO-14001 and REACH compliant, UL/EN OR equivalent
BIS/TECH/STQC or any indian standards as applicable, CE, FCC certified.
duly erected in position on wall/ceiling/false ceiling/provided pole
(mounting height not more than 5 meter) etc with all accessories etc
complete as per specification no. CCTV-CAM
20 Events : Privacy Masking, Motion detection, Scene change detection, NCSR (RATES AS PER I. 10610.00
Face capture, Video tampering, audio exception detection, Region NO. 19.6.4 OF CSR 23-24)
entrance detection, Region exiting detection.
Operating temperature ( -30 to 60° C ) .
Security - User account and password protection, HTTPS, IP filter, IEEE
802.1X, digest authentication, user access log, TLS1.2, AES - 256,
SSH/Telnet closed, FTP disabled.
Protocol - DHCP, UDP, HTTP, HTTPS, NTP, DNS, RTP, RTSP, SMTP,
SSL/TLS, TCP/IP, Secure Real-Time Transport Protocol (SRTP), Bonjour,
SNMP and Secure shell (SSH) supported protocol.
RoHS, WEEE, ISO-14001 and REACH compliant, UL/EN OR equivalent
BIS/TECH/STQC or any indian standards as applicable, CE, FCC certified.
duly erected in position on wall/ceiling/false ceiling/provided pole
(mounting height not more than 5 meter) etc with all accessories etc
complete as per specification no. CCTV-CAM.
Events : Privacy Masking, Motion detection, Scene change detection,
Face capture, Video tampering, audio exception detection, Region
entrance detection, Region exiting detection.
Operating temperature ( -30 to 60° C ) .
Security - User account and password protection, HTTPS, IP filter, IEEE
802.1X, digest authentication, user access log, TLS1.2, AES - 256,
SSH/Telnet closed, FTP disabled.
Protocol - DHCP, UDP, HTTP, HTTPS, NTP, DNS, RTP, RTSP, SMTP,
SSL/TLS, TCP/IP, Secure Real-Time Transport Protocol (SRTP), Bonjour,
SNMP and Secure shell (SSH) supported protocol.
RoHS, WEEE, ISO-14001 and REACH compliant, UL/EN OR equivalent
BIS/TECH/STQC or any indian standards as applicable, CE, FCC certified.
duly erected in position on wall/ceiling/false ceiling/provided pole
(mounting height not more than 5 meter) etc with all accessories etc
complete as per specification no. CCTV-CAM.
21 Supplying, fixing, and configuring 8-ports managed gigabit, Layer-2 1.11.2 25482.00
switch, 10/100/1000 base-T, POE smart switch plus 2 SFP erected in
provided rack complete.
22 Supplying, fixing, and configuring 24 ports with 4 (SFP+) port, ethernet 1.11.4 40653.00
managed switch with web view/CLI, 6KV surge protection on ethernet
port and console port for management in provided rack as per
specification no. WG-NWC/GBS
23 Supplying, installing, testing & commissioning of 32/40 Ch. Network NCSR (RATES AS PER I. 45460.00
Video Recorder (NVR), suitable connect Min. 32 IP Cameras, up to 5 NO. 19.6.15 OF CSR 23-
Megapixel Resolution, with HDMI/VGA outputs, provided HDMI output 24)
of 4K resolution or VGA output with output up to 1920 × 1080.
Support H.265 or higher, H.264, MJPEG,
Incoming Bandwidth 250Mbps with minimum 4 SATA Hard Disks, ANR
Technology,
4 SATA interfaces for 4 HDDs and capacity of each HDD up to 8TB,
minimum 02 USB port, Alarm I/O 16/4, RJ-45 10/100/ 1000 Mbps self-
adaptive Ethernet interface,
ONVIF conformance,
Multiple network monitoring: Web viewer .
support protocol TCP/IP, DHCP, DNS, DDNS, NTP, SADP, SMTP, NFS,
iSCSI, UPnP™, HTTPS.
RoHS, UL, CE, FCC certified.
duly erected in provided U Rack with wiring connections, tagging and
programming etc. complete as per specification no. CCTV-NVR
24 Supplying & erecting 8 TB internal Surveillance HDD suitable for SATA NCSR (RATES AS PER I. 23722.00
Port of NVR, interface transfer rate 6 GB/S, maximum sustained NO. 19.6.21 OF CSR 23-
transfer rate 210 MB/Sec to 213 MB/S. Drive bay supported 08+, 24)
Cameras supported up to 64, Cache (MB) 256, Load/Unload Cycle -
3000000, Work Load Rating per Year 180TB, MTBF 1000000 Hrs.
HTTPS. RoHS, UL, CE certified, duly erected in position in provided NVR
as per specification no. CCTV-HDD
25 Supplying & erecting 55" professional LED display with 1920 *1080 NCSR (RATES AS PER I. 66746.00
( Full HD) Display, suitable for 32/64 channel NVR and following NO. 19.6.25 OF CSR 23-
features 24)
Brightness: minimum 500 Cd/m2
Contrast Ratio: minimum 1000:1
Viewing angle: 178/178 deg.
Response time: maximum 8 ms
Inputs: HDMI, VGA, BNC,USB, Audio In,
Built-in speakers maximum 10 W,
Suitable to operate on 100-240 V 50 Hz AC supply and 24/7 Duty Cycle
duly erected on wall or table top with standard accessories like wall
mount stand and wiring connections etc. complete as per specifications
no. CCTV-MON
2 Supplying and installation of Solar PV Module cleaning unit consisting 4.8.8+N 34541.00
of nozzles spray, necessary pipes, valves, post, electronic panel board
concealed with weather proof cabinet, spreading water periodically for
removal of dust, related motor pump, controller, timer and nozzles set
suitable for covering 50 KW Solar PV Module. (Approx. 140 Sq. Mtr. PV
Module area).
3 Providing & erecting 4 Pole MCCB, 415 V, 100A, rated short-circuit 5.5.1+N 6370.80
breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal
(overload) setting and fixed magnetic setting with provided leads,
provision for installation of shunt/UV/trip alarm contact. MCCB with
phase barriers on both sides, insulation withstand capacity 800V, no
line-load bias in provided enclosure/panel as per specification no. SW-
SWR/MCCB
4 Supplying & erecting porcelain/epoxy bus bar support complete 5.10.26 69.00
erected in provided M.S. box for 100A
5 Supplying and erecting SS enclosure for MCCB suitable for up to 100A 5.11.17 984.00
MCCB.
6 Supplying and erecting iron work, sheet metal work consisting of 6.1.19 159.00
CRCA sheets, various sections of iron, plates, chequered plates,
rods, bars, MS pipes, etc. for panel board or any other purpose with
bending, cutting, drilling and welding complete erected at the
position with necessary materials duly painted with one coat of red
oxide and two coats of enamel paint to match the switchgears or as per
directions by the authority. (40X40X3 MM EQ. ANGLE - Approx. 18 kg
per PV Cell x 60 Nos = 1080 kgs)
7 Supplying and erecting static energy Trivector meter 440 V 50 Hz. 6.3.4 8241.00
20-100A ISI mark meter AC 3 phase 4 wires LCD/LED display
(Measuring and display Trivector, V, I, kW, PF, Hz, Last month history
of kWh & MD in kW) with special features like TOD, Tamper logging,
Optical Communication Port & Display in absence of Power complete
erected on polished teak wood board duly wired with required size of
weather proof PVC wires duly tested for class 1.0 accuracy by electric
supply company.
8 Supplying and erecting AC three phase HT CT multifunction net meter 6.3.15 24248.00
DLMS compliance of accuracy class 0.5, 3 x 240V, 50Hz, with backlit
LCD display, optical port & RS 232 port (measures import kWh, kVAh,
export kWh, kVAh, Net kWh, kVAh, V, I, kW, 6 months history of energy,
load survey, TOD, tamper detection & logging, power ON/OFF events,
instantaneous parameters of rating 1/5A with display in absence of
power) with wiring connections and mounting hardware on provided
panels complete with calibration certificate from manufacturer.
9 Supplying and erecting LT current transformer with bar primary 50/5 6.5.2 1027.00
to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly
secured with insulating materials connected to the meter with test
certificates.
10 Supplying, erecting & terminating FR XLPE insulated, galvanised steel 7.1.4 113.00
formed wire armoured (strip) cable 1100 V 2 core 4 sq. mm.
aluminium conductor complete erected with glands & lugs, on wall/
trusses/pole or laid in provided trench/ pipe as per specification no.
CB-LT/AL
11 Supplying, erecting & terminating FRLS XLPE insulated, galvanised 7.1.32 429.45
steel formed wire armoured (strip) cable 1100 V, 4 core 50 sq. mm.
aluminium conductor complete erected with glands & lugs, on wall/
trusses/pole or laid in provided trench/ pipe as per specification no.
CB-LT/AL
12 Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 9.1.3 6055.00
cm with funnel with a wire mesh for watering and brick masonry block
C.l. cover complete with all materials, testing & recording the results as
per specification no. EA-EP (PV System-1, LA-1 & Invertor-1)
13 Supplying and erecting GI strip of high purity required size used for 9.2.3 222.00
earthing on wall and/or any other purpose with necessary GI clamps
fixed on wall painted with bituminous paint with joints required. As per
specification no EA-EP. (25x3 mm, 0.59 kg/m x 75 m = 44.25 Say 44 kg)
14 Supplying & erecting conventional spike type air termination suitable 9.3.1 6079.00
to carry lightning stroke made up of heavy gauge 40 mm dia copper
pipe of standard length with 5 Nos. copper spikes fixed on copper ball
as air terminals duly threaded in copper pipe erected on provided
foundation complete.
15 Providing and back filling ground enhancing compound 25 kg bag 9.3.2 1242.00
complete.
16 Making cement concrete foundation in 1:2:4 cement concrete with 16.3.5 5011.00
foundation bolts and nuts complete. (cost of wooden box is included) cc
foundation per structure (0.3*0.3*0.3*4 Nos =0.108 cum x 60 PV Cells
= 6.48 Say 7 cum) for supports
STREET LIGHT
1 Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm 1.3.14 61.00
(30 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial
cable for voltage grade up to 1.1 kV
2 Supplying and erecting integrated LED street light fitting 60W IP65 & 2.4.5 4970.00
IK08 class having single piece pressure die-cast aluminium housing,
having system lumens output of Min. 6600 Lumens, min. efficacy of
110 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating
range of 140-270V, inbuilt surge protection of 10 kV, Life class of
50,000 Hrs. at L70B50, including driver complete with 3 Years warranty
as per specification No FG-ODF/FLS2.
3 Supplying and erecting two pole power contactor 230 V, 32 A for time 4.8.3 2366.00
switch complete erected on provided wooden block/ box, with
necessary materials.
5 Supplying, erecting & marking SPMCB 0.5A to 5A, C-series with rated 5.3.1 250.00
short - circuit breaking capacity (Icn) 10kA in provided distribution
board as per specification no. SW-SWR/MCB
6 Supplying, erecting & marking DPMCB 6A to 32A, C-series with rated 5.3.6 535.00
short - circuit breaking capacity (Icn) 10kA in provided distribution
board as per specification no. SW-SWR/MCB
7 Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm 5.4.13 400.00
thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete
erected on angle iron/GI frame.
8 Supplying, erecting & terminating FR XLPE insulated, galvanised steel 7.1.4 113.00
formed wire armoured (strip) cable 1100 V 2 core 4 sq. mm.
aluminium conductor complete erected with glands & lugs, on wall/
trusses/pole or laid in provided trench/ pipe as per specification no.
CB-LT/AL
9 Supplying, erecting & terminating FR XLPE insulated, galvanised steel 7.1.5 127.00
formed wire armoured (strip) cable 1100 V, 2 core 6 sq. mm.
aluminium conductor complete erected with glands & lugs, on wall/
trusses/pole or laid in provided trench/ pipe as per specification no.
CB-LT/AL
10 Supplying and laying (including excavation of suitable width & depth 7.6.9 210.00
up to 90 cm) 50 mm outside dia. double wall corrugated pipes
(DWC) of HDPE for enclosing cable below ground/road surface, to
required depth complete.
11 Providing & erecting 7 m high (clear height) galvanised octagonal pole 8.2.14 23692.00
with foundation bolts having bottom of 200 mm A/F, top 100 mm A/F
on provided foundation as per specification no. OH-PL/OPL
12 Providing and erecting galvanised 1000mm single arm sword type 8.2.21 2718.00
bracket with FRP dome and ball as per specification no. OH-PL/PBKT
13 Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. 9.1.4 1500.00
G.I. Rod complete with all materials testing and recording the results as
per specification no. EA-EP
14 Supplying and erecting GI strip of high purity required size used for 9.2.3 222.00
earthing on wall and/or any other purpose with necessary GI clamps
fixed on wall painted with bituminous paint with joints required. As per
specification no EA-EP. (30 m x 0.59 kg/m = 17.70 kgs, Say 18 kgs)
15 Making trench in Hard murum/Tar road having 0.75 m depth and 16.1.2 199.00
minimum 0.3mtr width as per IS for laying provided cables up to
voltage level 1.1Kv cable complete as per specification No. CW-EXN-
CTR
16 Making M- 20 grade reinforced cement concrete foundation by 16.3.9 3684.00
considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m
depth including supply of steel, concrete, excavation and fixing
provided nut bolts with the help of template, duly plastered as per
design complete (for 6m to 8m high octagonal /conical GI pole).
1 Carrying out core cutting of size 3" to 5" dia x 15" length in
7519.00
the C.C./rock/stone wall with the help of specialized core
cutting machine in proper manner and finishing the site as
original..
(CSR No.3-11-77)
2 207756.00
12
Supplying and erecting 150 mm dia. cast iron double
flange butterfly valve of size complete with PN16
6,327.00
pressure rating, as per specification no. FF-VL/BFV
(CSR No.13-7-21)
28
Supplying and erecting M.S./CRCA cabinet for housing
Fire Brigade / SIEMESE connections (size 1250 x 400 x
300 mm.) made from 16 SWG sheet and angle iron 25
mm. x 25 mm. x 4 mm. having front doors with viewing
8,249.00
glass (8" x 6") and locking arrangement with necessary
fixing material such as rubber bidding etc. duly painted in
post box red colour( Code 538 of IS 5)
(CSR No.13-8-19)
29
Supplying and erecting M.S./CRCA cabinet for housing
Floor Hydrant valve, hose pipe, hose reel and branch
pipe (size 1000 x 736 x 736 mm.) made from 16 SWG
sheet and angle iron 25 x 25 x 4 mm. having front doors
with viewing glass (8"x6") and locking arrangement with 15,886.00
necessary fixing material such as rubber bidding etc. duly
painted in post box red colour( Code 538 of IS 5). [Landing
Hydrants - 10 Nos & Court Yard Haydrants - 5 Nos]
(CSR No.13-8-20)
30
Providing coating of bitumen paint & pipeline corrosion
resistant Pypkote tape conforming to IS 10221 Appendix B
specification having 4mm thick wrapping for underground
150 mm ring main of fire fighting system.(Pypkote tape 345.00
comprises of a Tar based Polymeric mix supported on a
fabric of high tensile strength Fibreglass).
(CSR No.13-6-10)
31
Supplying & erecting Carbon Dioxide (CO2) fire
extinguisher of 4.5 kg. capacity cartridge type conform to
IS 2878 /15683 complete erected with necessary clamp
made from 50 x 6 mm. M. S. flat with nut & bolts routed in 9,902.00
wall complete. (5 Floors x 2 + 1 (Elec. Room at GF) + 2 in
Lift M/c Rooms at Terrace = Total 13 Nos)X 2 Set
(CSR No.13-15-1)
32
Supplying, erecting, testing and commissioning of Upright/
Pendent quartzoid bulb sprinkler, 15 mm (½") dia.
NBCM Body chrome finished, 68º C fixed temperature
427.00
rating with deflector disc of conventional construction
complete as per specification no. FF-SPR./UP
(CSR No.13-12-1)
33
Supplying erecting, testing and commissioning of sprinkler
flexible pipe of stainless steel complete with 15 NPT on
reducer thread with maximum working pressure of 175 PSI
test pressure of 875 PSI (Burst) with branch line (Inlet)
25mm NPT male thread to sprinkler head (Outlet) 15mm
666.00
NPT female thread with reducer, nipple, 2 side brackets,
center bracket, stockbar of 1000 mm size (UL Listed)
complete as required as per specification no.
FF-SPR/FHP
(NON CSR)
34 Supplying, erecting, testing and commissioning vane type
water flow detector 100 mm dia. with 1) Visual switch
activation 2) Rugged switch assembly 3) Heavy duty
aluminium pipe saddles 4)Durable metal enclosure 5) Steel
8,408.00
U bolts for secure mounting 6) Two SPDT ( Single pole
double track ) synchronised switches 7) serviceable
without draining pipes.
(CSR No.13-11-5)
35 Supplying and erecting G.I. pipe ‘C’ class ERW 25 mm
dia with necessary fittings complete as per specification
348.00
no. FF-PP
(CSR No.13-6-2)
36 Supplying and erecting G.I. pipe ‘C’ class ERW 32 mm
dia with necessary fittings complete as per specification
426.00
no. FF-PP
(NON CSR)
37 Supplying and erecting G.I. pipe ‘C’ class ERW 40 mm
dia with necessary fittings complete as per specification
473.00
no. FF-PP
(NON CSR)
38 Supplying and erecting G.I. pipe ‘C’ class ERW 50 mm
dia with necessary fittings complete as per specification
705.00
no. FF-PP
(CSR No.13-6-3)
39 Supplying and erecting G.I. pipe ‘C’ class ERW 65 mm
dia with necessary fittings complete as per specification
893.00
no. FF-PP
(CSR No.13-6-4)
40 Supplying and erecting G.I. pipe ‘C’ class ERW 75/80
mm dia with necessary fittings complete as per
1,116.00
specification no. FF-PP
(CSR No.13-6-5)
41 Supplying and erecting G.I. pipe ‘C’ class ERW 100 mm
dia with necessary fittings complete as per specification
1,588.00
no. FF-PP
(CSR No.13-6-6)
42 Supplying and erecting G.I. pipe ‘C’ class ERW 150 mm
dia with necessary fittings complete as per specification
2,409.00
no. FF-PP
(CSR No.13-6-7)
43 Supplying and erecting 50 mm dia. cast iron double
flange butterfly valve of size complete with PN16
2,393.00
pressure rating, as per specification no. FF-VL/BFV
(CSR No.13-7-17)
44 Supplying and erecting 25 mm dia gun metal gate valve
complete with PN16 pressure rating, as per specification
1,202.00
no. FF-VL/GV
(CSR No.13-7-32)
45
Supplying and erecting fire resistant mortar (20 kg) with
fire resistance class S90 as per National Electrical Code
(NEC) SP30-2011 suitable to seal the openings of all kinds
of cables, pipes and cable support system in steel,
10,044.30
aluminium and plastic profiles ( except hollow core
conductors). The residual openings shall be closed with
filler, as per specification no FF-FRM.
(NON CSR )
46 for satisfactory operation of main fire pump and jockey
(pressurisation) pumps (1working+1standby) with
necessary accessories, wiring & cabling along with allied
accessories with following incoming and outgoings,
suitable for automatic & manual operation on 415V, 3
phase, 50Hz ac supply as per specifications
the capacity of electric motor driven pump are as follows
a. Main fire pump(MFP) having capacity of 30 kW 1 no (1
working)
b. Jockey pump(JP) capacity of suitable capacity 1 nos (1
working+1standby, alternate run per start in auto mode),
comprises of the following features & switchgears:
1. Main incomer FP SFU having rotary handle with HRC
fuses of suitable rating.
2. Electrolytic grade copper strips for busbar of suitable
sizes for main incomer and branches to motor SFU's,
starters & outgoing terminals with necessary accessories
like stainless steel nut bolts with spring washers for
connections, mounted on required no of epoxy or porcelain 294,912.00
support insulators of suitable ratings etc.
3. Individual pump TPN SFU having rotary handle with
HRC fuses of suitable rating.
4. Digital voltmeter & ammeter & RYB indicating lamps &
push buttons & SPP, O/L & phase reversal protection with
emergency stop switch.
5. TPN SPD 100kA Type 1 +2 tested.
6. Required pressure transducer with pressure indication
on panel with cabling required for monitoring & automatic
operation of fire pumps.
7. System controller to control operation of main electric
fire pump, jockey (pressurization) pumps in sequence with
interlocking for operation of pumps as per specification
with automatic/manual operation with selector switch &
alternate run of standby Pumps consisting of relays,
timers. sensors, annunciation window for fault indication,
complete as per specification.
8.Suitable capacity electric motor starters for all individual
47
Providing, fixing and testing of 150mm dia alarm check
valve (FxF) with ACV trim set to water motor alarm/gong,
retard chamber, UL Listed/FM approved, complete with
drain cock arrangement and with all accessories, welded
37,817.00
or screwed as required including cutting holes and chased
in brick or RCC walls and making good complete as per
approved make & model.
(Non CSR)
50
Excavating hard murum / stone metal road by chiselling
for preparing pit for poles stay or earth plates or for laying
cables, pipes & clearing the site by removing debris &
making the site as required complete. (For wrapping of 150 300.00
mm GI Pipe to be laid underground... 380 m (L) x 1.0 m
(W) x 1.0 m (D) = 380 cum)
(CSR No.16-1-7)
51
Supplying, erecting & terminating FRLS XLPE insulated,
galvanised steel formed wire armoured (strip) cable
1100 V, 3 core 4 sq. mm. copper conductor complete
246.84
erected with glands & lugs, on wall/ trusses/ pole or laid in
provided trench/ pipe as per specification no. CB-LT/CU
(CSR No.7-2-15)
52
Supplying, erecting & terminating FRLS XLPE insulated,
galvanised steel formed wire armoured (strip) cable
1100 V, 4 core 10 sq. mm. copper conductor complete
erected with glands & lugs, on wall/ trusses/ pole or laid in
615.06
provided trench/ pipe as per specification no. CB-LT/CU
[Emergency Panel to TPNDB (V) at GF Floor DB Room.
Booster Pump Panel]
(CSR No.7-2-33)
56
Supplying & erecting D.O.L Starter suitable for 415 V, 3
phase 50 cycles with no volt coil and overload element
with necessary materials and connected to supply up to 1,865.00
7.5 H.P. (For Booster Pumps @ GF Floor DB Room)
(CSR No.12-4-2)
57 Providing Round bottom fire bucket of 9 Litres capacity
as per IS : 2546 made out of 24 gauge G.I. sheet with
extra handle at bottom duly painted white inside and red
outside with FIRE Mark, on provided stand/ wall hook
481.95
complete. (2 Nos each for Elec Rm, 2 each in 3 Lift M/c
Rooms)
(Rate adopted from Old CSR of 2021-2022. Item No. 10-2-
24)
58 Supplying and erecting wall hook 225mm projection for
keeping fire buckets made out of 15 mm dia. M.S. Rod
grouted in wall to a depth of minimum 15cms complete. 87.15
(Rate adopted from Old CSR of 2021-2022. Item No. 10-2-
26)
59 FAS SYSTEM
60
Supplying, installing, testing and commissioning of micro
processor based intelligent addressable main fire alarm
panel, central processing unit with the 2 loop capacity
and capable of supporting not less than 250 devices and
detectors per loop, with on-board LCD alphanumeric
backlit display suitable for minimum 80 characters,
operating at 230 V 50 Hz - AC with inbuilt Battery Backup
of a minimum 24 hours in normal condition and 30 minutes
in alarm condition, The panel shall have suitable provision
171,990.00
for network connectivity & compatible for
third party integration(Open Protocol to communicate) via a
MODBUS/BACNET interface etc. conforming to IS
15908:2021, IS 2189: 2008,
NFPA-72, EN 54 / VdS/FM & UL 864(10th edition) with 3
years replacement warranty and inclusive of lifetime
software license validity , as per specification noFF-
AFAS/CP.
(CSR No.13-10-2)
61
Supplying, installing, testing and commissioning of
intelligent addressable thermal/heat detector with rate of
rise cum fixed temperature thermistor complete with base
as required, suitable for temperature variations from -20°C
to 38°C for fixed-heat and rate-of-rise type detectors and
0°C to 66°C for high heat type detectors, in built isolation 2,705.00
mode, suitable for offices/ceiling cable trenches/less
ventilation area's etc. with 3 years equipment replacement
warranty IS : 2175 - 1988 reaffirmed 2000, IS 15908:2021
standards FF-AFAS/SD.
(CSR No.13-10-7 NEW)
62
Supplying, installing, testing and commissioning of
addressable manual call points ( break glass type/pull
station type), made of addressable break glass plastic
square in shape surface/flush mounted with "Break Glass"
massage embedded on the glass, complete erected with
3,575.00
mounting base and required accessories, Module shall
conform to EN 54/VdS / UL & FM approved with 3 years
equipment replacement warranty, as per specification no
FF-AFAS/MCP.
(CSR No.13-10-9)
63
Supplying, erecting, testing and commissioning hooters
having high (100dB @ 1m) and low (94dB @ 1m) volume
setting, group addressing facility allowing multiple
629.00
sounders to be activated with CRCA enclosure complete
as per specification no. FF-FAAS/HTR
(CSR No.13-9-8)
64
Supplying, installing, testing and commissioning of
addressable fire control/relay module for AHU, Access
Control, Lifts, Staircase Pressurization,Fire Suppression &
other Third Party Outputs etc., Module shall conforming to
3,775.00
IS 5051 Part 2 (Sec 1 to 3) : 1982 reed relays / EN 54/VdS
/ UL & FM approved with 3 years equipment replacement
warranty, as per specification no FF-AFAS/CRM-FCM
(CSR No.13-10-10)
65
Supplying, installing, testing and commissioning of
addressable fire monitor module for flow switches, Panic
Bars & other Third Party Inputs. The monitor module shall
monitor potential free contacts. The device shall have an
LED which shall blink in normal state & get steady on
activation to monitor the health status of the device 3,720.00
complete as required. Module shall conforming to IS 5051
Part 2 (Sec 1 to 3) : 1982 Reed relays, EN 54/VdS / UL &
FM approved with 3 years equipment replacement
warranty, as per specification no FF-AFAS/MM
(CSR No.13-10-11)
66
Supplying, installing, testing and commissioning of
addressable fire isolator module for isolating short /
dewired / loose circuits with automatic resetting
arrangement. Isolator Base can also be proposed,
however in that case needs to be considered with each
detector & module. The device shall have an LED which
shall blink in normal state & get steady on activation to 3,051.00
monitor the health status of the device. module complete
as required. Module shall conforming to IS 5051 Part 2
(Sec 1 to 3) : 1982, , EN 54/VdS / UL & FM approved with
3 years
equipment replacement warranty, FF-AFAS/ISM
(CSR No.13-10-12)
67
Supplying, installing, testing and commissioning of
repeater panel with suitable battery backup of a minimum
of 24 hours in normal condition and 30 min in alarm
condition, minimum 10" LCD or LED display with resistive
touch screen or function keys and automatic back-light
dimming and the status of any Fire/Fault of Integrated Fire
Alarm Panels or on-board LCD alphanumeric backlit
display suitable up to 640 characters with inbuilt buzzer to
74,501.00
indicate fault/fire alarm, manual control keys for
silence/mute and to reset the FACP from the repeater
station. Panel shall conforming to IS 15908:2021, IS
2189:2008, NFPA-72, EN 54 / VdS/FM & UL with 3 years
replacement warranty FFAFAS/RP.(Compatible with
modular FAS panel from 4 loop upto 10 Loop Fire Alarm
Control Panel), as per specification no FF-AFAS/RP
(CSR No.13-10-5)
FURNITURE
33 13000
f. Supplying and installing Storage- file cabinet(2
DRAWER FILING CABINET- make godrej or equivalent)
AHEB THACKREY SABHAGRAHA, NMC NAGPUR STATE- MAHARASHTRA.
NICIPAL CORPORATION, NAGPUR
RATE ANALYSIS
5.00
10.75 225.75 -- -- -- 0.00 225.75 225.80
0.00
56.30 1182.30 Sand 0.02 97.95 1.96 1184.26 1184.30
0.00
56.30 1182.30 Sand 0.02 0.00 0.00 1182.30 1182.30
12.00 312.00 Sand 0.02 97.95 1.96 313.96 314.00
2 21.04 Excavation for foundation in earth, soil of all types, sand, 531.645 281.40 Cu.M 149604.903
gravel and soft murum, including removing the excavated
material up to a distance of 50 m. beyond the building area
and stacking and spreading as directed, dewatering,
preparing the bed for the foundation and necessary back
filling, ramming, watering including shoring and strutting etc.
complete. (Lift from 1.5 m. to 3.0m)
3 Filling in plinth and floors with contractors material/brought 445.945 1304.10 Cu.M 581556.8745
21.37 from outside and approved by Engineer incharge in layers of
15 cm to 20 cm including watering and compaction etc.
complete.
4 Providing soling using 80 mm size trap metal in 15 cm. layer 280.1895 3089.60 Cu.M 865673.4792
21.4 including filling voids with Crushed sand/grit, ramming,
watering etc. complete.
5 Providing and laying Cast in situ/Ready Mix cement concrete 92.35 7343.60 Cu.M 678207.1626
24.01 in M-10 of trap/ granite/ quartzite/ gneiss metal for
foundation and bedding including bailing out water,
formwork, laying/pumping, compacting, roughening them if
special finish is to be provided, finishing if required and
curing complete, with fully automatic micro processor based
PLC with SCADA enabled reversible Drum Type
mixer/concrete Batch mix plant (Pan mixer) etc. complete.
With natural sand/V.S.I. quality Artificial Sand
6 Providing second class Flyash Brick masonry with 293.9175 8287.30 Cu.M 2435782.49775
27.12 conventional/ I.S. type bricks in cement mortar 1:6 in
foundations and plinth of inner walls/ in plinth external walls
including bailing out water manually , striking joints on
unexposed faces, raking out joints on exposed faces and
watering etc. Complete.
Page 179
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
8 Providing and laying Cast in situ/Ready Mix cement concrete 177.282 9056.20 Cu.M 1605501.2484
25.15 M- 30 of trap / granite /quartzite/ gneiss metal for R.C.C.
work in foundations like raft, strip foundations, grillage and
footings of R.C.C. columns and steel stanchions etc. columns
as per detailed designs and drawing or as directed including
centering, formwork, cover blocks laying/pumping,
compaction finishing the formed surfaces with cement
mortar 1:3 of sufficient minimum thickness to give a smooth
and even surface or roughening if special finish is to be
provided and curing etc. complete. (Excluding reinforcement
and structural steel). with fully automatic micro processor
based PLC with SCADA enabled reversible Drum Type mixer/
concrete Batch mix plant (Pan mixer) etc. complete. With
natural sand/V.S.I. quality Artificial Sand
Page 180
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
First Floor 234.63 17180.384 4031085.039072
Second Floor 133.65 17345.58 2318236.767
Third Floor 133.65 17510.776 2340315.2124
Terrace Floor 6.88 17695.79552 121809.00846192
Page 181
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
14 BDF11 Providing and laying in situ M-20 Cement concrete or trap / Cu.M
26.17 granite / quartzite / gneiss metal for RCC work of walls
including scaffolding, compaction, finishing, plywood/steel
formwork, steel centering. The C.M. 1:3 plaster is considered
for rendering uneven and honey combed surface only.
(Excluding reinforcement, including cover
block) Newly laid concrete shall be covered by
gunny bag, plastic, tarpaulin etc. (Wooden
centering / formwork will not be allowed).
Page 182
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
15 Providing and laying Cast in situ/Ready Mix cement concrete Cu.M
26.26 in M-25 of trap / quartzite /granite /gneiss metal for R.C.C.
Waist slab, and steps of staircases as per detailed design and
drawings or as directed including steel centering,
plywood/steel formwork, steel props, laying/pumping,
compaction, finishing uneven and honeycombed surface
with C.M. 1:3 of sufficient minimum thickness to give a
smooth and even surface or roughening the surface if special
finish is to be provided and curing etc. complete. (Excluding
einforcement, including cover block).(Newly laid concrete
shall be covered by gunny bag, plastic, tarpaulin etc.) with
fully automatic micro processor based PLC with SCADA
enabled reversible Drum Type mixer/ concrete Batch mix
plant (Pan mixer) etc. complete. With natural sand/V.S.I.
quality Artificial Sand
18 Providing fly ash brick masonry with conventional/ I.S. type Cu.M
27.13 bricks in cement mortar 1:6 in superstructure including
striking joints, raking out joints, watering and scaffolding etc.
Complete
Page 183
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
First Floor 0.00 1219.829 0
Second Floor 0.00 1231.672 0
Terrace Floor 53.73 1243.515 66808.0174671
Page 184
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
Second Floor 37.67 72.512 2731.16448
Third Floor 31.59 73.216 2312.89344
Terrace Floor 2.03 73.92 149.688
30 Providing and fixing Indian teak wood joists and girders in Cum
37.03 timber floors of single, double or framed type including
scaffolding if necessary, and one coat of primer etc.
complete.
Page 185
Ite
SSR Item
m Providing and laying Item of workblack / Amba White
telephone Quantity Basic Rate Unit
Sq.M Amount
Nos.
No. /Cadburybrown / Ruby red / Ocean Brown granite stone of
18 to 20 mm thick for door frame/ dado/ window boxing etc.
On C.M. 1:6 including filling joints with polymer base filler
nosing the sharp edges wherever necessary, curing, etc.
complete.
43 Providing and applying Two coats of wall care Putty of 2mm Sq.M
32.34 thickness for plastered surface and 5-6mm thickness
finished concrete surface to Ceiling and Walls to prepare
surface even and smooth of Brands BIRLA WHITE, BERGER,
BISION, J.K., make, etc complete. a) For plastered
walls/ceiling 2mm
47 Providing and fixing single leaf panelled door shutter without Sq.M
39.06 fanlight and shutter 35 mm thick as per drawing consisting of
T.W. top rail size 100mm x 35 mm and bottom and lock rail
200mm x 35mm insert panel 12 mm thick commercial ply
faced T.W. particle board with phenol formaldehyde
synthetic resin (Generally confirming to ISI 3097) excluding
frame, including
stainless steel fixtures fastening and T.W. beading at
junction of panels inserts and as instructed by the Engineer
in charge including 3 coats of oil painting etc. complete.
48 Providing and fixing Country cut teak wood double or single Sq.M
39.04 leaf second class fully panelled door shutter with 35mm
thick style and rail with 25 mm thick panels with openable
fan light as per detailed drawings. Excluding the door frame
60mm x 100mm stainless steel fixtures and fastening and
finishing the
wood work with oil painting 3 coats. (Excluding the door
frame)
49 Providing and fixing Country cut teak wood double or single Sq.M
39.04 leaf second class fully panelled door shutter with 35mm
thick style and rail with 25 mm thick panels with openable
fan light as per detailed drawings. Excluding the door frame
60mm x 100mm stainless steel fixtures and fastening and
finishing the
wood work with oil painting 3 coats. (Excluding the door
frame)
Page 188
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
Second Floor 8.64 10778.229 93123.89856
Terrace Floor 0.00 10987.515 0
51 Providing and fixing steel ventilator fully glazed partly fixed Sq.M
39.3 as per detailed drawing with hot dip zinc coating including
fabricating glazing with plain / obscured glass pans 5 mm
thick and approved type quality and iron oxidized fixtures
and fastening with guard square bars 12 mm 10 cm c/c and
oil painting 2 coats etc. complete.
52 Providing and fixing mild steel grill work for windows, Sq.M
40.01 ventilators etc. 20 kg/sqm as per drawing including fixtures,
necessary welding and painting with one coats of
anticorrosive paint and two coats of oil painting complete.
53 Providing and fixing in position TMT - FE - 500 bar 594.24 98044.80 M.T 58262290.0344539
26.33 reinforcement of various diameters for R.C.C. pile caps,
footings, foundations, slabs, beams columns, canopies,
staircase, newels, chajjas, lintels pardis, copings, fins, arches
etc. as per detailed designs, drawings and schedules.
including cutting, bending, hooking the bars, binding with
wires or tack welding and supporting as required complete.
55 Providing and fixing M40 grade thick vibrated pull cast or Rmt
similar type concrete frame with chamfer conforming to I.S.
65241983 having 6 mm dia bars 3 Nos. And strips @250 mm
c/c and fixing in wall with 6 Nos. of hold fast of 12 mm dia
bars 500 mm long including primer and oil painting etc,Page 189
complete) frame size 60 mm x 125 mm
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
Providing and fixing M40 grade thick vibrated pull cast or Rmt
39.57 similar type concrete frame with chamfer conforming to I.S.
65241983 having 6 mm dia bars 3 Nos. And strips @250 mm
c/c and fixing in wall with 6 Nos. of hold fast of 12 mm dia
bars 500 mm long including primer and oil painting etc,
complete) frame size 60 mm x 125 mm
Page 190
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
56 Providing cement based water proofing treatment to Sq.M
31.04 terraces (Indian water proofing or alike) with brick bats laid
in required slope to drain the water for any span after
cleaning the base surface. Applying a coat of cement slurry
admixed with approved water proofing compound and
laying the brick bats on bottom layer in C.M.1:5 admixed
with approved water proofing compound filling up to half
depth of brick bats, curing this layer for 3 days, applying
cement slurry over this layer joints of brick bats with C.M.1:3
admixed with approved water proofing compound and
finally top finishing with average 20
mm. thick layers of same mortar added with jute fiber at 1
Kg
per bag including finishing the surface smooth with cement
slurry admixed with approved water proofing compound.
Marking finished surface with false squares of 300mm x 300
mm. making the junctions at the parapet rounded and
tapered top for required height, with drip mould at the
junction of plaster and parapet and curing and covering 10
years Guarantee against leakproofness on Court fee stamp
paper of Rs. 500/- including ponding test etc. complete.
58 Providing and Fixing mat finish stainless steel (of 302 grade ) Rmt
40.08 railing with top pipe of 50 mm dia. and vertical pipe of 38
mm dia at 0.60 m c/c or as required and horizontal pipes of
25 mm dia in three rows, all pipes of 2 mm thick including
buffing,fabricating fixtures and fastening including pipe base
of appropriate diameter and ball base of 75 mm dia above
newel post of 75 mm diameter etc. complete (Prior approval
of sample and brand by Ex.Engineer is necessary before use)
Page 191
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
59 Providing and fixing false ceiling with eco-friendly light- Sq.M
38.4 weight calcium silicate tiles of spintone surface texture
aerolite make or equivalent of size 595mm x 595mm having
15mm thick densified micro look edge and 100% humidity
resistance incombustible as per BS 46part IV and thermal
conductivity 0.043 w/m 0 KC and NRC 0.50 placed in true
horizontal level suspended grid of size 600x600mm made
from hot dipped G.I. steel sections ion silhouette profile,
rotary stitched double webbed white with 6mm reveal
profile (white/black), wherein, main T runner of size
42mmx14mm between main tee 600mm center-tocenter
and secondary cross T of size 33x14x0.43mm
thick of length 600mm long spaced inter-locked at middle of
the first crossed T in each panel to form grid of
1200mmx600mm resting on periphery wall Profile wall
section 19mm (7+7) x 9mmx0.40thicknesses and laying false
ceiling for services like diffusers grills including cutting,
making opening for light fittings, fixtures, , smoke detectors
etc., wherever required. Main T runners suspended from
ceiling with using G.I. soffit cleats of size 25x35x1.6 mm of
required length fixed to the ceiling with 6mm dia and 50mm
long dash fastener, 4mm dia G.I.
adjustable rods with powder-coated/good quality G.I. level
adjustment clips of 35x35x0.8mm spaced @1200, center-
tocenter along main T all complete at all heights as per the
Page 192
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
TOTAL #NAME?
B. HVAC WORK
Page 193
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
Page 194
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
Page 195
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
Page 196
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
Page 197
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
Page 198
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
Page 199
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
Page 200
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
C. AUDIO WORK
Supply, Installation, testing & commissioning of
Subwoofer with Frequency Response (+/- 3dB) : 40Hz to
120Hz or better; Nominal Dispersion : Omnidirectional;
Long Term Power Handling : 1000W or better;
Impedence : 4 /8 Ohms; Sensitivity (SPL / W @ 1 Mtr) :
97 db SPL or better; Max SPL @ 1 Mtr (Cont.) : 127 Db SPL
1 or better; Transducers : 1 x 15" or better complete with 1 Set ### 2,290,347.20
all standard accessories as per the tender specification.
Page 201
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
Supply, Installation, testing & commissioning of Right line
array loudspeaker with Frequency Response (+/-3dB) :
70 Hz to 16kHz or better; Horizontal Nominal Dispersion :
100 degree Horizontal or better; Vertical Nominal
Dispersion : Total of 80 degree vertical dispersion is
required for uniform coverage. All OEMs shall quote
appropriate number of boxes as per vertical dispersion of
each box being proposed; Long Term Power Handling : LF
: 400 Watt or better, HF : 100 Watt or better; Impedence :
LF: 4 /8/16 Ohm, HF: 8Ohm; Sensitivity(SPL / W @ 1 Mtr)
: LF: 93 dB SPL or better, HF: 106 dB SPL or better; Max
2 SPL @ 1 Mtr (Cont.) : LF: 120 dB SPL or better, HF: 128 dB 1 Set ### 2,290,347.20
SPL or better; Transducers : HF: 1 X 1.5" or 2 X 1" or
better, LF: Min. 2 X 6.5" or better complete with all
standard accessories as per the tender specification.
Page 202
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
Supply, Installation, testing & commissioning of Green
Room Speaker with Frequency Range (+/- 10dB) : 120Hz
to 19kHz or better; Nominal Dispersion : 110 H x 60 V or
better; Power Handling@ 70/100v : 15 W or better;
Sensitivity (SPL / W @ 1 Mtr) : 84 Db SPL or better; Max
10 SPL @ 1 Mtr (Cont.) : 96 Db SPL or better; Transducers : 6 Nos. 21,247.40 127,484.40
2" or better complete with all standard accessories as per
the tender specification.
20 Supply of Network Switch as per the tender specification. 1 Nos. 3,307.50 3,307.50
Page 203
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
Supply, Installation, testing & commissioning of Wireless
handheld microphone with Polar Pattern : Cardioid /
Hypercardioid / Supercardioid; RF Freq Range : 548 MHz
to 865 MHz or better; Audio Bandwidth : 80 Hz to 16kHz
or better; RF Power : 10mW or better; THD : <0.5% or
21 better; S/N Ratio : >103 dB or better complete with all 2 Nos. 33,075.00 66,150.00
standard accessories as per the tender specification.
12,795,544.10
Page 204
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
D. ACOUSTIC WORK
Sr. ITEM Qty Unit Rate Amount
Fabric Panels -Providing & Fixing in position, Acoustical
ABSO 50mm Fabric panels on side wall and back wall, size as
per suggestion of Arch/ Consultant .Made from 6mm plywood
backing and 25mm reinfocred in MDF edges, Fabric panels
pervaded with Acoustic Synth polyfiber wadding, vertical core,
wadding of 50 thickness and density of 1000 GSM weight 1.00
kg/m2 NRC upto 0.8 sec, Thermal (w/mk ) 0.04, green VOC -
low, RC % 25, covered with first layer of non woven fabric and
second layer of acoustically transparent colored fabric as per
the the suggestions of the architect or consultant. fabric
polyster 100%, , weight 350 gm per linera meter, width 54 ",
Abrasion resistance 80000 cycles, color fastness wet 4, dry 5,
flammability BS EN 1021; 1 ( cigarette ) ( Base rate of fabric
Rs 300/- per Mt), The fabric panels shall be mounted on GI
FRAME - G.I frame of 600mm x 600mm fabricated with
1 80x26x0.5 ceiling sections 20x27x30x0.5 perimeter channel as 388.4 Sqm 5,376.00 2,088,038.40
required, 15x45x0.5 intermediate channel , 25x10x0.55 ceiling
angle at securely fixed to wall. frame channels as per
manufacturers specifications. Including all cut outs , etc as per
architectural and acoustical design and complete in all
respects. (Side walls, Back walls above Dado) Make: ABSO FP
46
Page 205
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
Stage Floor-Providing & fixing in position Stage flooring using
37mm thick ( after finishing 25mm) (4''w x 5' L ) Teal wood
planks on 18 mm water proof ply fixed to Teak wood frame of
50 x 50 mm wooden sections at 600mm c to c on stage surface
including grinding to smooth finish, filling gaps and hand
5 polish, as per Architectural & Acoustical Design & Instructions 112.5 Sqm 18,107.30 2,037,071.25
& Complete in all aspects.
8,518,795.80
E. STAGE LIGHT
SITC of 200W LED Fresnel Light havingCOB LED source from Citizen/
Philips/ Osram/ Cree or reputed make (LM80 to be provided)3200K
colour temperatureHigh quality uniquely designed Fresnel
LensCRI,TLCI and R9 value above 96LED COB Based Source
4 No Multiple Shadows – Single Source illuminationTotal Power 4 75,506.60 302,026.40
Consumption of 210WLinear dimming 0 ~ 100% Adjustment Flicker
Free for High FPS, Power AC90-260V, 50/60HZ Working
Temperature - +40° ~ -30°Active Cooling with Low Noise Fan
Page 206
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
DmX & RDM Control options with latest technology
Fixture provided with Yoke of Manual Adjustment
Manual and DMX control Option mode through 5pin/3pin xlr
Black powder coated fabricated housing with normal yoke. RDM
Control options with latest technology (RDM ID to be specified) LM79
Certificates from NABL Accredited laboratory Certification having BIS 0.00
compliant to IS 10322 (Part 5/ Sec 1):2012
CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014
Brand embossed impact on the light body for genuine product
SITC of 54 x 3W LED Par Light RGBW, Beam Angle 25° complete with
LED source from Lumi led / Seoul / Nichia or reputed make (LM80 to
be provided) RGBW 3W Lamp source x 54 Pcs DmX 512 dimming
with 8 Channel High Bright Red, Green, Blue, White LED’s Source
Unlimited Colour Mixing through DmX 0 ~ 100% Linear dimming
In built presets for different coloursStrobe Mode 20 times/Sec
Data DmX through 5 Pin XLR’s65dB ~ 130dB Sound sensing capacity
Power In and Out ConnectionsHigh precision colours, IP20 protection
5 Powder coated Black finish housingHaving Sound Control & Master 16 10,144.10 162,305.60
Slave Auto Run Mode Illuminate the Indoor stage with unlimited
colour effectsRigidly built pressure die-casted Aluminium body.RDM
Control options with latest technology (RDM ID to be specified)LM79
Certificates from NABL Accredited laboratory
Material for the light bar shall be of Mild Steel Pipe.Dual Barrel
Arrangement Powder coated with Matt black Texture Fixing Through
Suspenders as per site conditions Dual Construction and an
additional End Caps on the Pipe end shall be thereLight bar Length
shall be of customized type as per site condition.Upper pipe of dual 0.00
construction is used to anchor the bar lower pipe is effectively used
to hang the light fixtures
Page 207
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
total load of 400KG each fastener.Made out of 48mm Outer Dai, 40
Nominal BoreMaterial for the light bar shall be of Mild Steel Pipe.Dual
Barrel Arrangement Powder coated with Matt black TextureFixing
Through Suspenders as per site conditionsDual Construction and an
additional End Caps on the Pipe end shall be there Light bar Length 0.00
shall be of customized type as per site condition.Upper pipe of dual
construction is used to anchor the bar lower pipe is effectively used
to hang the light fixtures
SITC of DmX Loop Junction Box having 1 No. of DmX 5 Pin XLR
Female Socket & 1 No. DmX XLR Male Socket fitted on to a sheet
metal fabricated compact Junction box powder coated with matt
black texture finish paint.High temperature resistant insulator
18 materialAll metal housing offers best overall RF protection 1 2,144.10 2,144.10
&electromagneticshielding. Clamp arrangement for fixing or Raul
plug arrangement for wall /floor fixing
Page 208
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
SITC of Opto isolated RDM enabled DmX splitter unit provided with, 8
Isolated outputs Slow blow safety fuse 5 Pin XLR for output interface
25 Dual mode to select 2 universe operationDmX Input through 5 Pin 2 26,876.90 53,753.80
XLR Connector
27 SITC of 5 Core DmX Cable with Sheathed housing on the cable, well 300 198.50 59,550.00
designed insulation, low noise suitable to transmit DmX signal.
Grand Total of Stage Lighting 2,152,913.80
F. STAGE DRAPERY
Page 209
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
Providing and supplying folding platform of sizes as mentioned below
in Deodar frame of 100mm x 35mm size, covered on all sides with
6mm plywood and top to be covered by 25mm thick Deodar wood
planks Including all necessary arrangement , labour, taxes, Transport
14 etc complete. as per detailed design drawing & speci. as directed by 6 Nos 7,980.00 47,880.00
Engineer in Charge. Including Labour Cess, & Insurance.
A) Size 1.83 x 1.20 x 0.45 m (6' x 4' x 1' 6")
B) Size 1.83 x 1.20 x 0.230 m ( 6' x 4' x 9") 3 Nos 5,880.00 17,640.00
C) Size 1.83 x 0.90 x 0.45 m ( 6' x 3' x 1'-6" ) 2 Nos 7,350.00 14,700.00
D) Size 1.83 x 0.90 x 0.230 m ( 6' x 3' x 9") 2 Nos 5,260.50 10,521.00
E) Size 1.20 x 1.20 x 0.600 m ( 4' x 4' x 2') 2 Nos 4,200.00 8,400.00
Providing making and supplying Rostrum speech table of required
size made in 19mm ply wood with laminated finish and height of 1.07
15 m (3' - 6" ) complete Including all material, necessary arrangement , 1 Nos 21,840.00 21,840.00
labour, taxes, etc. complete.as per details & directed by Engineer
-incharge. Including Labour Cess, & Insurance.
₹ 2,010,771.00
F. PLUMBING WORK
SR.
DESCRIPTION OF ITEM UNIT Qty Rate Total
NO.
a BS Rmt. 0 662.60 -
b GF Rmt. 80 669.23 53,538.08
c FF Rmt. 80 675.85 54,068.16
d SF Rmt. 80 682.48 54,598.24
e TF Rmt. 80 689.10 55,128.32
Providing and fixing 100 mm dia stabiliser pipe/
P.V.C. soil vent/waste pipe and with necessary fixtures
1.2 and fitting such as bends, tees, single junctions, slotted
vent, clamps etc. complete As directed by Engineer in
charge
a BS Rmt. 110 861.00 94,710.00
b GF Rmt. 90 869.61 78,264.90
c FF Rmt. 50 878.22 43,911.00
d SF Rmt. 50 886.83 44,341.50
e TF Rmt. 50 895.44 44,772.00
2 CPVC PIPING
Page 210
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
b GF Rmt. 30 475.10 14,253.12
c FF Rmt. 50 479.81 23,990.40
d SF Rmt. 50 484.51 24,225.60
e TF Rmt. 80 489.22 39,137.28
Providing and fixing Glass self 125 mm wide and 600 mm long
with necessary chromium plated brackets providing T.W.gutties
4
etc complete. (Prior approval of sample and brand by
Ex.Engineer is necessary before use.)
a BS Each 0 462.00 -
b GF Each 6 466.62 2,799.72
c FF Each 4 471.24 1,884.96
d SF Each 6 475.86 2,855.16
e TF Each 6 480.48 2,882.88
Providing and fixing European type white glazed earthenware
coupled closet symphonic trap with symphonic low level white
5
glazed 10 litres cistern with black backlite seat with all
necessary pipe connection etc. complete.
a BS Each 0 12,240.90 -
b GF Each 5 12,363.31 61,816.55
c FF Each 6 12,485.72 74,914.31
d SF Each 9 12,608.13 113,473.14
e TF Each 7 12,730.54 89,113.75
Providing and fixing C.P.pillar cock long neck with aerator of
6 approed make including necessary sockets / union nut etc.
complete.
a BS Each 0 1,775.60 -
b GF Each 10 1,793.36 17,933.56
c FF Each 12 1,811.11 21,733.34
d SF Each 15 1,828.87 27,433.02
e TF Each 10 1,846.62 18,466.24
Providing and fixing White glazed with bottle trap
earthenware Wash Hand Basin of 63x45 cm size including cold
water piller taps, brackets, rubber plugs and brass chain, stop tap,
7 chromium plate bottle trap and necessary pipe connections
including UPAC waste pipe and trap upto the outside face of
the wall, making good the damaged surface, testing etc.
complete.
a BS Nos. 0 7,774.20 -
b GF Nos. 10 7,851.94 78,519.42
c FF Nos. 12 7,929.68 95,156.21
d SF Nos. 15 8,007.43 120,111.39
e TF Nos. 10 8,085.17 80,851.68
Providing and fixing C.P.Angular stop clock with wall flange of
8 approved make continental including necessary sockets/union nut
etc. complete.
a BS Nos. 0 2,936.90 -
b GF Nos. 10 2,966.27 29,662.69
c FF Nos. 12 2,995.64 35,947.66
d SF Nos. 15 3,025.01 45,375.11
e TF Nos. 10 3,054.38 30,543.76
Page 211
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
a BS Nos. 0 5,178.60 -
b GF Nos. 0 5,230.39 -
c FF Nos. 0 5,282.17 -
d SF Nos. 3 5,333.96 16,001.87
e TF Nos. 4 5,547.32 22,189.27
Providing and fixing 100 mm dia. chromium plated brass showers
10 rose to 15mm dia. supply pipe including necessary bend and
socket complete.
a BS Nos. 0 576.50 -
b GF Nos. 0 582.27 -
c FF Nos. 0 588.03 -
d SF Nos. 3 593.80 1,781.38
e TF Nos. 4 599.56 2,398.24
Providing and fixing White Glazed Earthenware full stall type
Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting,
inlet pipes and stop tap, brackets for fixing the cistern, 32 mm dia.
11
P.V.C flush pipe with fittings and flushing arrangement including
lead soil pipe, lead trap, soil pipe connectionup to the outside face
of the wall
a BS Nos. 0 10,682.70 -
b GF Nos. 0 10,789.53 -
c FF Nos. 5 10,896.35 54,481.77
d SF Nos. 5 11,003.18 55,015.91
e TF Nos. 0 11,110.01 -
Providing and fixing C.P.Two way BIB cock of approved
12 make continental including necessary sockets/union nut etc.
complete.
a BS Nos. 0 1,593.90 -
b GF Nos. 5 1,609.84 8,049.20
c FF Nos. 6 1,625.78 9,754.67
d SF Nos. 9 1,641.72 14,775.45
e TF Nos. 7 1,657.66 11,603.59
Providing and fixing 10 cm PVC nahani trap with grating etc.
13
complete.
a BS Nos. 0 589.10 -
b GF Nos. 2 594.99 1,189.98
c FF Nos. 2 600.88 1,201.76
d SF Nos. 2 606.77 1,213.55
e TF Nos. 2 612.66 1,225.33
Providing and fixing 15cm rigid PVC Nahani trap including PVC
grating,bend,connecting piece of UPVC pipe upto the outside face
14 of wall,making the good damaged surface and testing
etc.complete. (Prior approval of sample and brand byEx.Engr.is
necessary before use)
a BS Nos. 0 623.70 -
b GF Nos. 7 629.94 4,409.56
c FF Nos. 9 636.17 5,725.57
d SF Nos. 12 642.41 7,708.93
e TF Nos. 8 648.65 5,189.18
a BS Rmt. 0 137.60 -
b GF Rmt. 8 138.98 1,111.81
c FF Rmt. 8 140.35 1,122.82
d SF Rmt. 8 141.73 1,133.82
e TF Rmt. 8 143.10 1,144.83
a BS Rmt. 0 171.20 -
b GF Rmt. 8 172.91 1,383.30
c FF Rmt. 8 174.62 1,396.99
d SF Rmt. 8 176.34 1,410.69
e TF Rmt. 8 178.05 1,424.38
Page 212
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
a BS Rmt. 0 246.80 -
b GF Rmt. 8 249.27 1,994.14
c FF Rmt. 8 251.74 2,013.89
d SF Rmt. 8 254.20 2,033.63
e TF Rmt. 8 256.67 2,053.38
a BS Rmt. 0 328.70 -
b GF Rmt. 0 331.99 -
c FF Rmt. 0 335.27 -
d SF Rmt. 0 338.56 -
e TF Rmt. 0 341.85 -
a BS Rmt. 0 461.00 -
b GF Rmt. 0 465.61 -
c FF Rmt. 0 470.22 -
d SF Rmt. 0 474.83 -
e TF Rmt. 0 479.44 -
Providing and fixing 15 cm x 10 cm salt glazed stoneware gully
trap in cement concrete 1:4:8 outside the building including cast
20 iron grating in the sink, connecting glazed stoneware pipe, brick
masonry chamber with cast iron lid and cast iron grating for the
gully trap.
a BS Each 0 1,748.30 -
b GF Each 5 1,765.78 8,828.91
c FF Each 0 1,783.27 -
d SF Each 0 1,800.75 -
e TF Each 0 1,818.23 -
a BS Each 0 10,878.00 -
b GF Each 18 10,986.78 197,762.04
c FF Each 0 11,095.56 -
d SF Each 0 11,204.34 -
e TF Each 0 11,313.12 -
Page 213
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
a BS Each 0 621.60 -
b GF Each 50 627.82 31,390.80
c FF Each 20 634.03 12,680.64
d SF Each 20 640.25 12,804.96
e TF Each 20 646.46 12,929.28
2 1.1.10 Supplying & laying HMS PVC conduit 25mm dia with necessary accessories in m 1230 122.90 151167.00
RCC work/false ceiling/false flooring as per specification no. WG-MA/CC.
3 1.1.11 Supplying & erecting HMS PVC conduit 32mm dia. with necessary accessories in m 125 189.00 23625.00
wall/floor with chiselling appropriately as per specification no. WG-MA/CC.
4 1.1.12 Supplying & laying HMS PVC conduit 32mm dia. with necessary accessories in m 321 164.90 52932.90
RCC work/false ceiling/false flooring as per specification no. WG-MA/CC.
5 1.2.7 Supplying and erecting PVC trunking (PVC casing-n-capping) of size 25mm with m 133 46.20 6144.60
accessories on wall/ceiling as per specification no. WG-MA/CON.
6 1.2.9 Supplying and erecting PVC trunking (PVC casing-n-capping) of size 40mm with m 20 85.10 1702.00
accessories on wall/ceiling as per specification no. WG-MA/CON.
7 NCSR Supplying and erecting 16 g, Metal/G.I. propagating under floor ducts/raceways m 11 660.50 7265.50
of 225mm Width x 38 mm depth ( 3 Compartment )including the connectors and
the clamps at required intervals. The ducts shall be in trapezoidal shape tested
for 750 N point load suitable for inscreed application. (NCSR as per Rate Analysis
based on Market Rates)
8 NCSR Supplying and erecting underfloor junction box of size 225mm x 225mm x 65 mm m 3 469.40 1408.20
with flush finish powder coated appearance having knock outs for Aluminium
duct entry of size 60x25 mm width and 95x35 mm ducts complete. (NCSR as per
Rate Analysis based on Market Rates)
9 1.3.1+N Supplying & erecting mains with 1x1.5 sq.mm FRLSH copper PVC insulated wire m 2706 21.00 56826.00
Green in colour as Earth wire laid in provided conduit/trunking/inside pole/bus
bars or any other places as per specification no. WG-MA/BW
10 1.3.2 Supplying & erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire m 2653 65.10 172710.30
laid in provided conduit/trunking/inside pole/bus bars or any other places. as per
specification no. WG-MA/BW
11 1.3.2.+N Supplying & erecting mains with 1x2.5 sq.mm FRLSH copper PVC insulated wire m 193 32.60 6291.80
Green in colour as Earth wire laid in provided conduit/trunking/inside pole/bus
bars or any other places as per specification no. WG-MA/BW
12 1.3.3 Supplying & erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire m 246 93.50 23001.00
laid in provided conduit/trunking/inside pole/bus bars or any other places. as per
specification no. WG-MA/BW
13 1.6.1 Supplying and erecting modular type switch 6A/10A on provided plate and box each 82 75.60 6199.20
with wiring connections complete.
14 1.6.2 Supplying and erecting modular type switch 16A on provided plate and box with each 54 111.30 6010.20
wiring connections complete.
15 1.6.3 Supplying and erecting modular type bell-push 6A/10A on provided plate and each 7 111.30 779.10
box with wiring connections complete.
16 1.6.10 Supplying and erecting modular type 3 pin 6A multi socket with safety shutter each 53 117.60 6232.80
on provided plate and box with wiring connections complete.
17 1.6.11 Supplying and erecting modular type 3 pin 6/16A multi socket with safety each 36 168.00 6048.00
shutter on provided plate and box with wiring connections complete.
18 1.6.21 Supplying and erecting modular type (two module) electronic dimmer each 8 333.90 2671.20
600/650W on provided plate and box with wiring connections complete. (For
LED Lights of Ceiling in Auditorium)
19 1.6.23 Supplying and erecting modular type (two module) electronic step regulator for each 170 401.10 68187.00
fan, on provided plate and box with wiring connections complete.
20 1.6.24 Supplying and erecting modular type blanking plate one module, on provided each 101 22.10 2232.10
plate & box.
21 1.6.27 Supplying and erecting PVC Surface modular switch box with double mounting each 11 134.40 1478.40
plate for 2 module complete.
22 1.6.30 Supplying and erecting PVC Surface modular switch box with double mounting each 21 233.10 4895.10
plate for 6 module complete.
23 1.6.32 Supplying and erecting PVC Surface modular switch box with double mounting each 7 360.20 2521.40
plate for 12 module complete.
Page 214
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
24 1.6.34 Supplying and erecting unbreakable concealed type modular switch box with each 16 231.00 3696.00
double mounting plate for 1 module duly flushed to wall with required chiselling
and finishing with cement mortar / POP as per required to match the
background.
25 1.6.35 Supplying and erecting unbreakable concealed type modular switch box with each 8 232.10 1856.80
double mounting plate for 2 module duly flushed to wall with required chiselling
and finishing with cement mortar / POP as per required to match the
background.
26 1.6.36 Supplying and erecting unbreakable concealed type modular switch box with each 8 262.50 2100.00
double mounting plate for 3 module duly flushed to wall with required chiselling
and finishing with cement mortar / POP as per required to match the
background.
27 1.6.38 Supplying and erecting unbreakable concealed type modular switch box with each 3 351.80 1055.40
double mounting plate for 6 module duly flushed to wall with required chiselling
and finishing with cement mortar / POP as per required to match the
background.
28 1.6.40 Supplying and erecting unbreakable concealed type modular switch box with each 9 549.20 4942.80
double mounting plate for 12 module duly flushed to wall with required
chiselling and finishing with cement mortar / POP as per required to match the
background.
29 1.6.41 Supplying and erecting unbreakable concealed type modular switch box with Point 4 608.00 2432.00
double mounting plate for 16/18 module duly flushed to wall with required
chiselling and finishing with cement mortar / POP as per required to match the
background.
30 1.7.15 Point wiring for light/bell hybrid type (surface type under false ceiling and Point 275 577.50 158812.50
concealed type for drops & switch boards on walls) in min 20 mm HMS PVC
conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires,
modular type switch, earthing and required accessories as per specification no.
WG-HW (Primary Points)
31 1.7.16 Point wiring for ceiling fan hybrid type (surface type under false ceiling and Point 161 669.90 107853.90
concealed type for drops & switch boards on walls) in min 20 mm HMS PVC
conduit / casing n caping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires,
modular type switch, earthing and required accessories as per specification no.
WG-HW
32 1.7.19 Point wiring for light/bell/exhaust fan in PVC trunking (casing-capping) with 1.5 Point 102 579.60 59119.20
sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and
required accessories as per specification no. WG-PW/SW
33 1.7.20 Point wiring for ceiling fan in PVC trunking (casing-capping) with 1.5 sq.mm Point 9 640.50 5764.50
(2+1E) FRLSH grade copper wire, modular type switch, earthing and required
accessories as per specification no. WG-PW/SW
34 1.7.19+N 2 Way Point wiring for light in Stair Case in PVC trunking (casing-capping) with Point 15 869.40 13041.00
1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and
required accessories as per specification no. WG-PW/SW
35 1.7.22 Secondary point wiring for additional light/bell point in min 20mm PVC conduit each 439 214.20 94033.80
with 1.5 sq.mm (2+1E) FRLSH grade copper wire with required accessories as per
specification no. WG-PW/SW
36 1.7.26 Wiring for plug on board with switch socket surface/concealed type, copper each 103 405.30 41745.90
wiring and earthing and with modular accessories as per specification no. WG-
PW/CW
37 NCSR Supplying and ercting 3 NOS 20-24 W LED TRACK LIGHTS WITH 1M LONG TRACK each 19 3653.00 69407.00
(70W) similar to PHILIPS MAKE, ST030T LED20/830 23W 220-240V I NB WH
complete at position with minimum 2 years warranty. NCSR (RA Attached)
38 2.1.1 Supplying and erecting decorative pre-wired box type fitting / batten suitable for each 96 295.10 28329.60
4 feet, T8 LED tube light (excluding tube light).
39 2.1.4 Supplying and erecting LED square / circular Max. 12 W down lighter / Panel each 28 1273.70 35663.60
Light having pressure die-cast aluminium housing, polystyrene diffuser having
system lumens output of Min. 1500 Lumens, min. efficacy of 110 lumen/W,
CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%,
p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of
50,000 Hrs at L70B50 including driver, having mounting arrangement with board
for surface type or spring loaded mounting clips complete with minimum 2 years
warranty as per specification No. FG-IDF/LED.
40 2.1.6 Supplying and erecting LED square / circular Max. 20 W down lighter / Panel each 366 2048.60 749787.60
Light having pressure die-cast aluminium housing, polystyrene diffuser having
system lumens output of Min. 2750 Lumens, min. efficacy of 110 lumen/W,
CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%,
p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of
50,000 Hrs at L70B50 including driver, having mounting arrangement with board
for surface type or spring loaded mounting clips complete with minimum 2 years
warranty as per specification No. FG-IDF/LED.
41 2.1.7 Supplying and erecting LED Panel Light (600mm X 600mm) Max. 30 W having each 135 2650.20 357777.00
CRCA powder coated housing, polystyrene diffuser having system lumens
output of Min. 3600 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto
6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95,
operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs
at L70B50 including driver, having mounting arrangement with board for surface
type or spring loaded mounting clips complete with minimum 2 years warranty as
per specification No. FG-IDF/LED.
42 NCSR Supplying & erecting inverter LED Panel Light 10-12-15W , heat sink, integrated each 90 1435.40 129186.00
HF electronic driver, Min. 2600 mA Lithium ion Battery with charging time of 8-10
Hours and backup time of Min. 3 Hrs with minimum 25% of initial Watts having
luminous efficacy of 100 lumen/watt, CRI>80, CCT of 6500K and THD<=20 %
having useful life of minimum 25000 Hrs with over heat protection with
minimum 2 years. NCSR (RA Attached)
Page 215
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
43 NCSR Supplying, erecting, testing and commissioning of CHANDELIER (12 x 5W) similar each 3 284681.30 854043.90
to MODEL:CELESTE, JAQUAR MAKE, 630MM DIA X 930MM HEIGHT with asfour
almaaza crystal, chrome finished with necessary arrangement for erection, etc.
NCSR (RA Attached)
44 2.1.13 Making suitable size recess in any type of false ceiling for erection of flush type each 484 81.90 39639.60
down lighter and finishing the background to match the original surface upto
20W as per specification No. FG-IDF/LED.
45 2.1.14 Making suitable size of recess in any type of false ceiling for erection of flush each 199 140.70 27999.30
type LED panel light 600mm x 600mm / 1200x300mm and finishing the
background to match the original ceiling surface as per specification No.
FG-IDF/LED.
46 2.1.15 Supplying and erecting Bulk Head LED fitting Max. 10W with high transitivity each 56 1486.80 83260.80
diffuser with system lumens output of Min. 1100 lumens, min. efficacy of 110
lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., THD<10%, p.f.
>0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class
of 50,000 Hrs at L70B50, IP66, IK09 rated including driver IP66, IK09 rated on
provided PVC Block / wooden board with minimum 2 years warranty as per
specification No. FG-IDF/LED.
47 2.1.16 Supplying and erecting anodized aluminium mirror light LED fitting (2 feet) Max. each 12 454.70 5456.40
12W with high transitivity diffuser with min. system lumens output of 1200
lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of
110 deg., Ripple<5%, THD<20%, p.f. >0.95, operating range of 200-270V, surge
protection of 2 kV, Life class of 50,000 Hrs at L70B50 including driver with end
caps on provided PVC Block / wooded board with minimum 2 years warranty as
per specification No. FG-IDF/LED.
48 NCSR Supplying and erecting Dimmable LED square / circular Max. 20-23-24 W down each 64 4402.70 281772.80
lighter / Panel Light having pressure die-cast aluminium housing, polystyrene
diffuser having system lumens output of Min. 2750 Lumens, min. efficacy of 110
lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%,
THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV,
Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement
with board for surface type or spring loaded mounting clips complete with
minimum 2 years warranty. NCSR (RA Attached)
49 2.1.22 Supplying & erecting inverter LED batten 20W tube light fitting with each 43 1169.70 50297.10
polycarbonate housing, heat sink, integrated HF electronic driver, Min. 2600 mA
Lithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3
Hrs with minimum 25% of initial Watts having luminous efficacy of 100
lumen/watt, CRI>80, CCT of 6500K and THD<=20 % having useful life of
minimum 25000 Hrs with over heat protection with minimum 2 years as per
specification No. FG-IDF/LED.
50 2.3.13 Supplying and erecting ding dong / electronic musical type call bell with heavy each 7 147.00 1029.00
duty coil suitable to operate on 230V A.C. supply erected on polished double
wooden block / sunmica block of suitable size.
51 2.4.23 Supplying and erecting Concealed type foot/step light Max. 5W having IP67, each 66 4027.80 265834.80
IK10 rated Pressure die cast housing having system lumens output of Min. 500
Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of
110 deg., THD<10%, SDCM<5, p.f. >0.95, operating range of 230-270V, surge
protection of 2.5 kV, Life class of 25,000 Hrs at L70B50, including driver by
making necessary arrangement / recess in wall to make it flush with surface with
minimum 2 Year warranty.
52 2.8.14 Supplying & erecting ready to use Retrofit T8 LED, 18 / 20 watt tube light with each 96 658.40 63206.40
polycarbonate body, heat sink, integrated HF electronic driver complete &
compatible to T8 / T12 LED luminaire by disconnecting starter & ballast if
necessary as per specification No. FG-LP/RET.
53 2.9.1 Supplying & erecting aviation obstruction light minimum up to 48 watt each 1 5066.30 5066.30
consisting of yellow painted die-cast aluminium alloy housing with integral LED
aviation light comprising of aluminium housing with polycarbonate enclosure
complete as per specification No. FG-AV.
54 2.10.2 Supplying and erecting regular/ standard model ceiling fan of 900 /1050 mm. each 4 2196.60 8786.40
sweep complete erected in position as per specification no. FG-FN/CF.
55 2.10.3 Supplying and erecting regular/ standard model ceiling fan of 1400mm. sweep each 85 2388.80 203048.00
complete erected in position as per specification no. FG-FN/CF.
56 2.10.4 Providing and erecting bracket fan 400 mm. sweep A. C. 230 volts 50 cycles 1350 each 5 2562.00 12810.00
R.P.M. Oscillating type, plastic or metal blades chrome plated guard with
regulator and moisture proof treatment to winding and with ‘E’ class insulation.
57 2.10.14 Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. each 12 1537.20 18446.40
1400 RPM with condenser complete erected in position with necessary materials.
Fan motor with moisture proof treatment and ‘E’ class insulation.
58 2.10.17 Supplying and erecting exhaust fan heavy duty 230 V A.C. 50 cycles 375/380 each 8 4174.80 33398.40
mm. 1400 RPM complete erected in position as per specification no. FG-FN/EXF
59 2.10.21 Supplying and erecting Energy Saving Ceiling fan of 3 star rating as per BEE 230 each 81 2516.90 203868.90
V A.C. 50 cycles 1200 mm complete erected in position as per specification no.
FG-FN/CF
60 2.11.2 Supplying & fixing anchor type fastener fan hook, with 2 nos. of 10 mm dia x 75 each 196 108.20 21207.20
mm long with necessary materials for ceiling fan. (FOR C FANS-170 + CABLE TRAY
SUPPORTS-26 = 196 NOS)
61 2.11.6 Supplying and erecting ‘B’ grade G.I. pipe / M.S. pipe down rod duly painted for each 136 240.50 32708.00
fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC
wire. (800 mm long per Fan)
62 2.11.11 Providing recess in brick wall suitable for erection of exhaust fan up to 450mm. each 8 400.10 3200.80
sweep complete with grouting of nut, bolts, plastering and colour washing to
match the colour of the wall for the wall thickness of 225 mm.
Page 216
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
63 2.11.15 Supplying & erecting 22 SWG G.I sheet metal cawl sector shaped with 25 x 25 x 3 each 20 1253.70 25074.00
(mm) angle iron frame, metal mesh to avoid birds entry with necessary material,
suitable for exhaust fan of 400 mm as per specification no FG-FAS/MSC.
64 3.1.4 Supplying and erecting storage type water heater 50 litres capacity having each 4 16675.10 66700.40
standing loss < 0.614 kWh/24hour/45°C, high impact resistance engineering
plastic body with anti corrosive high grade steel inner tank heating element
having hard water & corrosion protection, with minimum 3 safety protections
(i.e. thermostat &thermal function valve) complete with 3 core PVC flexible
wire leads complete & total pressure 8 bar withstanding capacity duly tested and
marking sr. no. and date of erection complete as per specification no.
AP-WH/STWH
65 3.1.11 Providing fibre reinforced pvc flexible pipe upto 1m length with brass locking each 4 198.50 794.00
nuts and washers and clips at both ends suitable for hot water and cold water
both (1 set of 2 nos) complete.
66 3.3.8 Supplying, erecting, testing and commissioning self contained water cooler each 1 36276.50 36276.50
230/250V 50 cycles nominal cooling capacity of 40 litres per hour and storage
capacity 80 litres with partially stainless steel body As per specification No.
APWCR/ WC
67 3.3.10 Supplying, erecting, testing and commissioning self contained water cooler each 3 55948.20 167844.60
230/250 Volts 50 cycles nominal cooling capacity of 150 litres per hour and
storage capacity 150 litres with partially stainless steel body as per specification
No. AP-WCR/WC
68 3.5.1 Supplying and erecting ultra violet storage type water purifier ( RO+UV+UF) each 4 16685.60 66742.40
with softener for safe drinking water consisting of UV germicidal tube of 8W
capacity choke made of copper wire and two indicator lamps with output of
purified water minimum 0.33 litre/min with activated carbon filter and softener
operating on 230 V single phase A.C. supply with UV fail & filter change indication
system .(for TDS more than 200)
69 5.3.2 Supplying, erecting & marking SP MCB 6A to 32A, C-series with rated short - each 51 182.70 9317.70
circuit breaking capacity (Icn) 10kA in provided distribution board as per
specification no. SW-MCB
70 5.3.3 Supplying, erecting & marking SP MCB 6A to 32A, B-series with rated short - each 229 181.70 41609.30
circuit breaking capacity (Icn) 10kA in provided distribution board as per
specification no. SW-MCB
71 5.3.6 Supplying, erecting & marking DP MCB 6A to 32A, C-series with rated short - each 14 561.80 7865.20
circuit breaking capacity (Icn) 10kA in provided distribution board as per
specification no. SW-MCB
72 5.3.7 Supplying, erecting & marking DP MCB 6A to 32A, B-series with rated short - each 2 535.50 1071.00
circuit breaking capacity (Icn) 10kA in provided distribution board as per
specification no. SW-MCB
73 5.3.10 Supplying, erecting & marking TP MCB 6A to 32A, with rated short - circuit each 34 788.60 26812.40
breaking capacity (Icn) 10kA in provided distribution board as per specification
no. SW-MCB
74 5.3.11 Supplying, erecting & marking TP MCB 40A to 63A, with rated short - circuit each 26 1041.60 27081.60
breaking capacity (Icn) 10kA in provided distribution board as per specification
no. SW-MCB
75 5.3.12 Supplying, erecting & marking FP MCB 6A to 32A, with rated short - circuit each 4 1112.00 4448.00
breaking capacity (Icn) 10kA in provided distribution board as per specification
no. SW-MCB
76 5.3.13 Supplying, erecting & marking FP MCB 40A to 63A, with rated short - circuit each 5 1395.50 6977.50
breaking capacity (Icn) 10kA in provided distribution board as per specification
no. SW-MCB
77 5.4.1 Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB each 6 2473.80 14842.80
of 4 ways/phase (12 poles), with door, 1.2mm thickness, surface/flush mounted,
IP 43 protection on provided iron/GI frame (horizontal busbar type) as per
specification no. SW-MCBDB.
78 5.4.4 Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP each 3 4882.50 14647.50
MCBs total 4 ways/12 Poles, with door, 1.2mm thickness surface/flush mounted,
IP 43 Protection on provided iron/GI frame (vertical busbar type) as per
specification no. SW-MCBDB.
79 5.4.5 Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP each 1 5980.80 5980.80
MCBs total 8 ways/24 poles, with door, 1.2mm thickness surface/flush mounted,
IP 43 Protection on provided iron/GI frame (vertical busbar type) as per
specification no. SW-MCBDB.
80 5.4.8 Supplying and erecting single pole and neutral distribution board (SPNDB), with each 11 1306.20 14368.20
2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door,
1.2mm thickness surface/flush mounted, IP 43 Protection on provided iron/GI
frame as per specification no. SW-MCBDB
81 5.4.9 Supplying and erecting single pole and neutral distribution board (SPNDB), with each 6 1569.80 9418.80
2 ways for incoming and 8 ways (8 poles) for outgoing SP MCBs, with door,
1.2mm thickness surface/flush mounted, IP 43 Protection on provided iron/GI
frame as per specification no. SW-MCBDB
82 5.4.13 Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness each 30 420.00 12600.00
suitable for DP MCB/TP MCB/FP MCB/RCCB/RCBO complete erected on
provided angle iron/GI frame.
83 5.4.15 Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole each 4 6896.40 27585.60
MCCB as incomer & outgoing SP MCB (12 poles) or TP MCB of 4 ways (12 poles),
with door, 1.2mm thickness, surface/flush mounted, on provided iron/GI frame
(vertical busbar type) as per specification no. SW-SWR/MCBDB1
84 5.4.16 Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole each 5 8180.60 40903.00
MCCB as incomer & outgoing SP MCB (24 poles) or TP MCB of 8 ways (24 poles),
with door, 1.2mm thickness, surface/flush mounted, on provided iron/GI frame
(vertical busbar type) as per specification no. SW-SWR/MCBDB1
Page 217
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
85 5.4.17 Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole each 1 10752.00 10752.00
MCCB as incomer & outgoing SP MCB (36 poles) or TP MCB of 12 ways (36
poles), with door, 1.2mm thickness, surface/flush mounted, on provided iron/GI
frame (vertical busbar type) as per specification no. SW-SWR/MCBDB1
86 5.5.1+N Providing & erecting 4 Pole MCCB, 415V, up to 32/40/63/100 A, rated short- each 29 6689.30 193989.70
circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload)
setting and fixed magnetic setting with provided leads, provision for installation
of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides,
insulation withstand capacity 800V, no line-load bias in provided enclosure/panel
as per specification no. SW-MCCB
87 5.5.2+N Providing & erecting 4 Pole MCCB, 415V, 160/200 A, rated short-circuit breaking each 2 13361.00 26722.00
capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and
adjustable magnetic setting with provided leads, provision for installation of
shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation
withstand capacity 800V, no line-load bias in provided enclosure/panel as per
specification no. SW-MCCB
88 5.5.4+N Providing & erecting 4 Pole MCCB 415V, 250A, rated short-circuit breaking each 2 17840.30 35680.60
capacity 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and
adjustable magnetic setting with provided leads, provision for installation of
shunt/UV/trip alarm contact. MCCB should have phase barriers both sides, with
insulation withstand capacity 800V, no line-load bias in provided enclosure/panel
as per specification no. SW-MCCB
89 5.6.9 Supplying, fixing and commissioning 2 pole RCBO up to 25A, with overcurrent, each 23 3135.30 72111.90
rated short-circuit breaking capacity (10 kA) and earth leakage protection, with
30/100/300 mA sensitivity and short circuit and earth leakage trip indication as
per specification no SW-RCBO.
90 5.6.12 Supplying, fixing and commissioning 4 pole RCBO up to 25A, with overcurrent, each 3 4176.90 12530.70
rated short-circuit breaking capacity (10 kA) and earth leakage protection, with
30/100/300 mA sensitivity and short circuit and earth leakage trip indications per
specification no SW-RCBO.
91 5.6.13 Supplying, fixing and commissioning 4 pole RCBO 32/40A, with overcurrent, each 2 4249.40 8498.80
rated short-circuit breaking capacity (10 kA) and earth leakage protection, with
30/100/300 mA sensitivity and short circuit and earth leakage trip indication as
per specification no SW-RCBO.
92 5.6.15 Providing, erecting & commissioning 4 pole RCCB 40A, with added immunity to each 4 5844.30 23377.20
avoid DC pulse tripping with 30/100/300 mA sensitivity complete as per
specification no. SW-RCCB.
93 5.7.3 Providing & erecting floor/wall mounting, MCCB panel board, with door, suitable each 2 47661.60 95323.20
for 4 pole incoming 250A, 6 ways 4 pole outgoing, up to 100A MCCBs on iron
frame, as per specification no SW-MCCBPB. (Excluding MCCBs)
94 5.7.4 Providing & erecting floor/wall mounting, MCCB panel board, with door, suitable each 1 52724.70 52724.70
for 4 pole incoming 250A, 8 ways 4 pole outgoing, up to 100A MCCBs on iron
frame, as per specification no SW-MCCBPB. (Excluding MCCBs)
95 5.7.13 Providing & erecting incoming and outgoing cable alleys suitable for MCCB panel each 2 17479.40 34958.80
board with door, 250A incoming and 6 way outgoing or 400A incoming and 4
way outgoing made from CRCA sheet 1.6 mm thick duly powder coated and
having vertical insulated partition for shielding between the shared face of
cableway and DB complete.
96 5.7.14 Providing & erecting incoming and outgoing cable alleys suitable for MCCB panel each 1 19231.80 19231.80
board with door, 250A incoming and 8 way outgoing or 400A incoming and 6
way outgoing made from CRCA sheet 1.6 mm thick duly powder coated and
having vertical insulated partition for shielding between the shared face of
cableway and DB complete.
97 5.7.17 Providing & erecting prewired meter module suitable for MCCB panel board each 3 14561.40 43684.20
with CTs and emfs VIF meter.
98 5.11.1 Supplying and erecting terminal spreaders suitable for 3 pole, upto 250A MCCB each 1 209.00 209.00
(set of 6)
99 5.11.2 Supplying and erecting terminal spreaders suitable for 3 pole, upto 400A MCCB each 1 987.00 987.00
(set of 6)
100 320 Supplying and erecting terminal spreaders suitable for 4 pole, upto 100A MCCB SET 25 341.30 8532.50
(Set of 8)
101 1164 Supplying and erecting terminal spreaders suitable for 4 pole, upto 250A MCCB SET 3 1227.50 3682.50
(Set of 8)
102 6.1.19 Supplying and erecting iron work, sheet metal work consisting of MS sheets, kg 118 195.30 23045.40
various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc.
for panel board or any other purpose with bending, cutting, drilling and welding
complete erected at the position with necessary materials duly painted with
one coat of red oxide and two coats of enamel paint to match the switchgears or
as per directions by the site engineer. Iron Work for Supports of Cable Trays (kg) -
Support for every 0.33 m. (SUPPORTS FOR CABLE TRAYS AS PER CALCULATION
SHEET)
103 6.7.15 Supplying and erecting 150 kVAr, 3 phase, 50 Hz., Power contactors Derated for each 1 576253.70 576253.70
microprocessor APFC controller with MPP / APP type capacitor with 525 V and
having minimum overcurrent capacity of 1.8 In, peak inrush current capacity 300
In and minimum life 150000 hours with , consisting of suitable steps of MPP/APP
type capacitor units with detuned aluminium filter 7% reactors with circuit
breaker as main incomer and MCCB for each branch protection, as per
specification no CP-ED/APFC
104 7.1.32+N Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel formed m 225 450.90 101452.50
wire armoured (strip) cable, 1100 V 4 core 50 sq. mm. aluminium conductor
complete erected with glands & lugs on wall/ trusses/pole or laid in provided
trench/ pipe as per specification no. CB-LT/AL
Page 218
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
105 7.1.33+N Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel formed m 100 592.00 59200.00
wire armoured (strip) cable, 1100 V 4 core 70 sq. mm. aluminium conductor
complete erected with glands & lugs on wall/ trusses/pole or laid in provided
trench/ pipe as per specification no. CB-LT/AL
106 7.1.34+N Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel formed m 300 732.10 219630.00
wire armoured (strip) cable, 1100 V 4 core 95 sq. mm. aluminium conductor
complete erected with glands & lugs on wall/ trusses/pole or laid in provided
trench/ pipe as per specification no. CB-LT/AL
107 7.1.35+N Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel formed m 220 895.20 196944.00
wire armoured (strip) cable, 1100 V 4 core 120 sq. mm. aluminium conductor
complete erected with glands & lugs on wall/ trusses/pole or laid in provided
trench/ pipe as per specification no. CB-LT/AL
108 7.1.38+N Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel formed m 200 1694.50 338900.00
wire armoured (strip) cable, 1100 V 4 core 240 sq. mm. aluminium conductor
complete erected with glands & lugs on wall/ trusses/pole or laid in provided
trench/ pipe as per specification no. CB-LT/AL
109 7.2.8+N Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel wire m 439 154.20 67693.80
armoured (round) cable 1100 V, 2 core 2.5 sq. mm. copper conductor complete
erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe
as per specification no. CB-LT/CU
110 7.2.9+N Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel wire m 870 208.80 181656.00
armoured (round) cable 1100 V, 2 core 4 sq mm copper conductor complete
erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe
as per specification no. CB-LT/CU
111 7.2.10+N Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel wire m 65 263.50 17127.50
armoured (round) cable 1100 V, 2 core 6 sq mm copper conductor complete
erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe
as per specification no. CB-LT/CU
112 7.2.31+N Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel wire m 530 318.10 168593.00
armoured (round) cable 1100 V, 4 core 4 sq. mm. copper conductor complete
erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe
as per specification no. CB-LT/CU
113 7.2.32+N Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel wire m 219 424.10 92877.90
armoured (round) cable 1100 V, 4 core 6 sq. mm. copper conductor complete
erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe
as per specification no. CB-LT/CU
114 7.2.33+N Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel formed m 780 645.80 503724.00
wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copper conductor
complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided
trench/ pipe as per specification no. CB-LT/CU
115 7.2.34+N Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel formed m 526 924.30 486181.80
wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. copper conductor
complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided
trench/ pipe as per specification no. CB-LT/CU
116 7.6.9 Supplying and laying (including excavation of suitable width & depth up to 90 m 60 220.50 13230.00
cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for
enclosing cable below ground/road surface, complete.(For Cales to laid on
Terrace)
117 7.11.3 Providing & erecting hot dipped galvanised ladder type cable tray manufactured m 30 896.70 26901.00
from 16 SWG GI sheet of 300 mm width & 100 mm height with required
standard accessories.
118 NCSR AS PER CSR Providing & erecting hot dipped galvanised perforated type cable tray m 366 709.80 259786.80
23-24 7.11.7 manufactured from 16 SWG GI sheet of 200 mm width & 75 mm height
complete with necessary coupler plates & hardware.
119 NCSR AS PER CSR Providing & erecting hot dipped galvanised perforated type cable tray m 10 888.30 8883.00
23-24 7.11.8 manufactured from 16 SWG GI sheet of 300 mm width & 75 mm height
complete with necessary coupler plates & hardware.
120 7.11.12 Providing & erecting hot dipped galvanised cover suitable for ladder/perforated m 366 477.80 174874.80
type Cable tray manufactured from 18 SWG (1.2 mm thick) GI sheet of 200 mm
width & 20 mm height complete with necessary hardware.
121 7.11.13 Providing & erecting hot dipped galvanised cover suitable for ladder/perforated m 10 657.30 6573.00
type Cable tray manufactured from 18 SWG GI sheet of 300 mm width & 20 mm
height complete with necessary hardware.
122 9.1.3 Supplying, installing and testing earthing with galvanized iron earth plate size 60 each 4 6357.80 25431.20
x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block
C.I. cover complete with all accessories of G.I. materials & recording the results
as per specification no. EA-EP
123 9.2.3 Supplying and erecting GI strip of required size used for earthing on wall and/or kg 15 247.80 3717.00
any other purpose with necessary GI clamps fixed on wall painted with
bituminous paint in an approved manner with joints required as per specification
no EA-EP. G.I.Strip for Earthing - (Size: 25x3 mm ... 24 m x 0.59 kg/m = 14.16 kgs
SAY 14 KGS
Page 219
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
125 NCSR MAIN PANEL BOARD: each 1 472500.00 472500.00
Design,fabrication,assembling,supply,installation,testing and commissioning of
cubicle type LT panels suitable for 415 V 3 phase , 4 wire 50 Hz AC supply system
fabricated in compartmentised design from CRCA sheet steel of 2 mm thick for
frame work IP 52 and covers, 3 mm thick for gland plates i/c cleaning and
finishing complete 9 tank process for powder coating in approved shade RAL
7032, extendable type TPN aluminium alloy bus bars of high conductivity,
DMC/SMC busbar supports, with bottom base channel of MS section not less
than 75mm X 50 mm X 5mm thick, entire panel shall have a common copper
earthbar of required size at the rear with 2 nos earth studs, solid connection from
main busbar to switchgears with require size of aluminium busbar & control
wiring with 2.5 sqmm FRLS insulated copper conductor cable ,cable alleys ,cable
gland plates i/c accessories as per specification and providing switchgears,
metering instruments etc. as follows:
Lift shaft available having clear size of 1450 mm wide x 1650 mm deep, 1600 mm -
Pit depth, 4800 mm Overhead.
· Doors type :- COPO/TOPO Doors with frame made from SS 304 grade -
solid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landing
doors with SS door architraves/frames The lift doors shall have minimum 1 hour
fire rating (with submission of necessary valid test certificate issued by NABL
accredited or Independent test laboratory).
Page 220
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
· Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of -
1.5mm, thick with hairline finish with frame made from MS girders, bracing of
adequate size with minimum safety factor of 5, with Toe Guard Apron, with
necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS
chequered plate flooring, handrails, mirror, emergency light etc. The lift car
interior design shall be done as per the directions of engineer in charge.
· COP with SS face plate having metallic push buttons with Braille code & -
luminous indicator around button with FPI, scrolling UP/DN LED indicator &
with / without attendant key switch, OWD with audio-visual alarm, VAS in
Marathi, Hindi & English with intercom system with telephone instrument in Lift
car, LMR & FCC/ground floor.
· LOP with SS face plate having recess/surface push button box for all landings -
with scrolling UP/DN LED indicator having metallic push buttons with Braille code
& luminous indicator around button with CPI, Lift car arrival & next travel
direction audio-visual indication at all landings.
· Other mechanical parts such as 'T' section adequate size guide rails for car & -
counter weight with brackets fasteners, counter weight frame with necessary
blocks, buffers with necessary support arrangement, MS pit ladder etc. erected
with necessary steel work.
· Minor civil work such as alteration work if any necessary for erection of -
landing door frames and it's accessories e.g. sill, header, hole pass etc complete
with plaster finish, civil work for erection buffers, erection of lift machinery,
adequate size core cuts if required & scaffolding for erecting guide rails, providing
and fixing steel girders/RCC work having adequate strength for mounting and
hoisting lift machine etc. complete as per specification no. LFT.
2 17.1.10 SITC of Electric Traction Passenger Lift with Each 2 2060164.10 4,120,328.20
· Rated capacity :- 20 Passenger/1360 Kg -
· Floors :- G+3 Upper floors (4 Stops/4 Landings) -
· Travel :- 15.6 mtrs (3.45+4.05*3) -
· Location of Lift Machine:- Machine room (MR/MRL) -
· Rated speed :- 1.0mps VS -
· Car/Landing door clear opening of minimum 1000 mm wide x 2000 mm high -
· Clear Car size of minimum 2000 mm wide x 1500 mm deep x 2250mm high -
Lift shaft available having clear size of 2540 mm wide x 2500 mm deep, 1600 mm -
Pit depth, 4800 mm Overhead.
· Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of -
1.5mm, thick with hairline finish with frame made from MS girders, bracing of
adequate size with minimum safety factor of 5, with Toe Guard Apron, with
necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS
chequered plate flooring, handrails, mirror, emergency light etc. The lift car
interior design shall be done as per the directions of engineer in charge.
Page 221
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
· COP with SS face plate having metallic push buttons with Braille code & -
luminous indicator around button with FPI, scrolling UP/DN LED indicator &
with / without attendant key switch, OWD with audio-visual alarm, VAS in
Marathi, Hindi & English with intercom system with telephone instrument in Lift
car, LMR & FCC/ground floor.
· LOP with SS face plate having recess/surface push button box for all landings -
with scrolling UP/DN LED indicator having metallic push buttons with Braille code
& luminous indicator around button with CPI, Lift car arrival & next travel
direction audio-visual indication at all landings.
· Other mechanical parts such as 'T' section adequate size guide rails for car & -
counter weight with brackets fasteners, counter weight frame with necessary
blocks, buffers with necessary support arrangement, MS pit ladder etc. erected
with necessary steel work.
· Minor civil work such as alteration work if any necessary for erection of -
landing door frames and it's accessories e.g. sill, header, hole pass etc complete
with plaster finish, civil work for erection buffers, erection of lift machinery,
adequate size core cuts if required & scaffolding for erecting guide rails, providing
and fixing steel girders/RCC work having adequate strength for mounting and
hoisting lift machine etc. complete as per specification no. LFT.
3 17.1.14 SITC of Electric Traction Passenger/Good's Lift with Each 1 2780788.50 2,780,788.50
21-22 · Rated capacity :- 29 Passenger/1972 kgs -
Page 285 · Floors:- Basement+G+3 Upper Floors (5 Stops/5 Landings) -
· Travel :- 19.95 m (4.35+3.45+4.05*3) -
· Location of Lift Machine:- Machine room (MR/MRL) -
· Rated speed :- 1.0mps VS -
· Car/Landing door clear opening of 1700 mm wide x 2000 mm high -
Lift shaft available having clear size of 2250 mm wide x 3050 mm deep, 1600 mm -
Pit depth, 4800 mm Overhead.
· Doors type :- TOPO Doors with frame made from SS 304 grade solid(non- -
cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with
SS door architraves/frames The lift doors shall have minimum 1 hour fire rating
(with submission of necessary valid test certificate issued by NABL accredited or
Independent test laboratory).
· Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of -
1.5mm, thick with hairline finish with frame made from MS girders, bracing of
adequate size with minimum safety factor of 5, with Toe Guard Apron, with
necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS
chequered plate flooring, handrails, mirror, emergency light etc. The lift car
interior design shall be done as per the directions of engineer in charge.
Page 222
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
· COP with SS face plate having metallic push buttons with Braille code & -
luminous indicator around button with FPI, scrolling UP/DN LED indicator &
with / without attendant key switch, OWD with audio-visual alarm, VAS in
Marathi, Hindi & English with intercom system with telephone instrument in Lift
car, LMR & FCC/ground floor.
· LOP with SS face plate having recess/surface push button box for all landings -
with scrolling UP/DN LED indicator having metallic push buttons with Braille code
& luminous indicator around button with CPI, Lift car arrival & next travel
direction audio-visual indication at all landings.
· Other mechanical parts such as 'T' section adequate size guide rails for car & -
counter weight with brackets fasteners, counter weight frame with necessary
blocks, buffers with necessary support arrangement, MS pit ladder etc. erected
with necessary steel work.
· Minor civil work such as alteration work if any necessary for erection of -
landing door frames and it's accessories e.g. sill, header, hole pass etc complete
with plaster finish, civil work for erection buffers, erection of lift machinery,
adequate size core cuts if required & scaffolding for erecting guide rails, providing
and fixing steel girders/RCC work having adequate strength for mounting and
hoisting lift machine etc. complete as per specification no. LFT.
4 Add On I No A 1 For Lift having 700 mm wide x 2000 mm high clearance in 1.5 mm thick SS 304 Floor 2 139,699.40 139,699.40
PG 274 grade landing door entrance in 1.5mm thick SS 304 grade landing door [Two
panel], this includes all necessary accessories like LOP's with UP/DN buttons-
arrows-indicators, extension of guide rails, shaft wiring with trunking, traveling
cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories
etc. necessary for the normal safe functioning of lift installation complete. (As per
Add On A 1, item no 1 Pg 271 for 4 Passenger Lifts) (1 Lift x 2 floors = 2 Floors)
5 Add On I No A 4 For Lift having 1000 mm wide x 2000 mm high clearance in 1.5 mm thick SS 304 Floor 4 153412.40 613,649.60
PF 274 grade landing door entrance in 1.5mm thick SS 304 grade landing door [Two
panel], this includes all necessary accessories like LOP's with UP/DN buttons-
arrows-indicators, extension of guide rails, shaft wiring with trunking, traveling
cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories
etc. necessary for the normal safe functioning of lift installation complete. (As per
Add On A 4, item no 4 Pg 274 for 20 Passenger Lifts) (2 Lift x 2 floors = 4 Floors)
6 Add On I No A 10 For Lift having 1700 mm wide x 2000 mm high clearance in 1.5 mm thick SS 304 Floor 3 224385.00 673,155.00
CSR 2021-22 Pg grade landing door entrance in 1.5mm thick SS 304 grade landing door [Two
284 panel], this includes all necessary accessories like LOP's with UP/DN buttons-
arrows-indicators, extension of guide rails, shaft wiring with trunking, traveling
cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories
etc. necessary for the normal safe functioning of lift installation complete. (As per
Add On A 10, item no 4 Pg 271 Passenger Lifts) (1 Lift x 3 floors = 4 Floors)
7 Add On I No G Add For Lift Car Door having clear entrance 1700 mm wide x 2000 mm high . (As Door 1 132735.80 132,735.80
A3, CSR 2021-22 per Add On G-A 3, item no 4 Pg 277 Passenger Lifts) (1 Lift Car Door)
Pg 277
Page 223
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
8 Add On I No G Add For Lift Landing Door having clear entrance 1700 mm wide x 2000 mm high . Each 3 30086.70 90,260.10
B3, CSR 2021-22 (As per Add On G-B 3, Pg 277 Passenger Lifts) (3 Lift Landing Doors)
Pg 277
2 9.2.7 Supplying and erecting copper strip of required size used for earthing on wall kg 941 1222.20 1150090.20
and/or any other purpose with necessary copper clamps fixed on wall painted
with insulating and non-corrosive bond with required joints as per specification
no. EA-EP.
Copper Strip 25x5 mm..1.15 kg/m Total Length - (334 m x 1.15 kg/m = 940.70 kg,
Say 941 kgs)
3 9.3.1 Supplying & erecting conventional spike type air termination suitable to carry each 5 6383.00 31915.00
lightning stroke made up of heavy gauge (C class) 40 mm dia 1.2mtr copper pipe
of standard length with 5 Nos. copper spikes fixed on copper ball of size 100mm
as air terminals duly threaded in copper pipe erected on provided foundation in
an approved manner as per spicification no. EA-LA
4 9.3.2 Providing and back filling carbon based environment friendly back fill earth each 5 1304.10 6520.50
conductivity enhancing compound of 25 kg bag complete.
Total Work Portion Rs >>>>>>> ₹ 1,261,002.20
J. XMER & DG SET
1 Supplying, erecting, testing & commisioning GI sheet 1.6 mm (16 SWG) caution Each 4 141.80 567.20
board of size 200 x 150 mm duly painted with red oxide and enamel paint in
marathi and hindi erected at position for medium voltage (415 Volt) erecting
with compliance to IS 2551-1982 as per specification no. CP/SH/CR (6-1-15)
2 Supplying, erecting, testing & commisioning GI sheet 1.6mm (16 SWG) caution Each 2 201.60 403.20
board of size 250 x 200 mm duly painted with red oxide and enamel paint in
marathi and hindi erected at position for HV/EHV (11000 Volts) erecting with
compliance to IS 2551-1982. as per specification no. CP/SH/CR (6-1-16)
3 Supplying, erecting, testing and commissioning 11KV HT metering cubicle Each 1 163044.00 163044.00
(compact/vertical type) approved by licensee fabricated with 2 mm (14 SWG)
M.S. sheets with supporting angle, painted with powder coating / epoxy paint of
required shade, copper bus bar size 25 x 6 mm, heavy duty mechanical lock, with
counter meter for measuring no of times the opening of meter door, top side
cover (CT, PT cover) interlock with meter door, epoxy casted 3 nos CT having
required ratio between 10/5A to 50/5A, VA10 or 15, Class 0.5S, epoxy casted 3
nos PT having ratio 11000/V3/110/V3 VA 50, Class 0.5 suitable for provided
trivector meter, and provision for incoming and outgoing cables complete duly
tested by licensee with necessary test certificates and erected on provided
plinth/ cc foundation as per specification no. CP-HT. (6-4-1)
4 Supplying, erecting, testing & commisioning 150 kVAr, 3 phase, 50 Hz., APFC Each 1 576253.70 576253.70
Panel with derated power contactor of suitable rating for capacitor switching
Application for each step controlled by microprocessor based APFC relay
consisting of 2,3,5,5,10,10,15,20,30,50 with MPP /APP type capacitor with 525 V
and having minimum overcurrent capacity of 1.8 In, peak inrush current
capacity 300 In and minimum life 150000 hours with detuned aluminium wound
reactor of 7/ 14% for each step, APFC Panel shall suitable rating MCCB as
incomer and each branch/step shall have separate isolation with MCCB/MCB of
Suitable rating for protection, compliance to IEC 61439 and power quality IEC
61921 standard as per specification no. CP-ED/APFC. (6-7-15)
5 Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel formed m 180 1694.50 305010.00
wire armoured (strip) cable, 1100 V 4 core 240 sq. mm. aluminium conductor
complete erected with glands & lugs on wall/ trusses/pole or laid in provided
trench/ pipe as per specification no. CB-LT/AL (7-1-38+N)
6 Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel formed m 200 2508.20 501640.00
wire armoured (strip) cable, 1100 V 4 core 400 sq. mm. aluminium conductor
complete erected with glands & lugs on wall/ trusses/pole or laid in provided
trench/ pipe as per specification no. CB-LT/AL (7-1-40+N)
7 Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire m 100 2064.40 206440.00
armoured (ROUND) cable 11 kV(E), 3 x 120 sq. mm. aluminium conductor laid in
provided trench / pipe as per specification no. CB-HT (7-3-3+N)
8 Providing and erecting Heat shrinkable indoor termination kit for 11 KV (E) XLPE Each 4 10997.70 43990.80
HT cable 3x120 to 185 sq. mm. with necessary material as per specification no.
CB-JT/HT (7-5-2)
9 Providing and erecting Heat shrinkable outdoor termination kit for 11 KV (E) Each 2 13780.20 27560.40
XLPE HT cable 3x120 to 185 sq. mm. with necessary material as per specification
no. CB-JT/HT (7-5-6)
10 Supplying & erecting G.I. pipe ‘A’ class 75 mm dia. for enclosing XLPE m 6 705.60 4233.60
armoured cable on wall/pole as per specification no. CB-CE (7-6-4)
11 Supplying & laying (including excavation) reinforced cement concrete pipe of m 30 597.50 17925.00
NP-2 class of 150 mm diameter in proper line, level and slope including providing
and fixing collars in cement mortar 1:2 and curing etc. complete.(7-6-5)
12 Supplying & laying (including excavation) half round reinforced cement concrete m 70 533.40 37338.00
pipe of NP-2 class of 150 mm diameter in proper line, level and slope including
providing and fixing collars in cement mortar 1:2 and curing etc. complete.(7-6-6)
Page 224
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
13 Supplying and laying (including excavation of suitable width & depth up to 90 cm) m 10 411.60 4116.00
120 mm outside dia. double wall corrugated pipes (DWC) of HDPE for
enclosing cable below ground/road surface, complete. (7-6-12)
14 Supplying, installing and testing earthing with galvanized iron earth plate size 60 Each 11 6357.80 69935.80
x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block
C.I. cover complete with all accessories of G.I. materials & recording the results
as per specification no. EA-EP (9-1-3) QTY AS PER EARTHING DETAILS
15 Supplying, installing and testing earthing with copper earth plate size 60 x 60 x Each 11 16520.70 181727.70
0.315 cm with funnel with a wire mesh for watering and brick masonry block C.l.
cover with minimum 25 kg Carbon based environment friendly back fill ground
ehancing compound complete with all accesories of copper materials & recording
the results as per specification no EA-EP/EF (9-1-6) QTY AS PER EARTHING
DETAILS
16 Supplying and erecting copper strip of required size used for earthing on wall m 78 927.20 72321.60
and/or any other purpose with necessary copper clamps fixed on wall painted
with bituminous paint in an approved manner with joints required. As per
specification no. EA-EP. (SIze: 25x5 mm... 66 m x 1.15 kg/m = 75.90 kgs SAY 76
KGS)(9-2-2)
17 Supplying and erecting GI strip of required size used for earthing on wall and/or m 39 233.10 9090.90
any other purpose with necessary GI clamps fixed on wall painted with
bituminous paint in an approved manner with joints required. As per
specification no EA-EP. (Size: 25x3 mm ... 66 m x 0.59 kg/m = 38.94 kgs SAY 39
KGS (9-2-3)
18 Supplying, installing, testing & commissioning compact substation with 3 phase, Each 1 2294415.90 2294415.90
11/0.433 kV, 50 Hz., 500 kVA, Mineral Oil immersed Copper wound, without gas
cushioning, hermetically Sealed transformer having indoor type transformer
bushings, with HT side (incoming side) Circuit Breaker of appropriate rating &
capacity and LT side (outgoing side) MCCBs (4 pole) of appropriate capacity, with
inbuilt metering cubical having 3 epoxy coated CT's with CT Ratio ......./5 A, 10 or
15VA Burden, 0.5S Accuracy Class, & 3 epoxy coated PT's with PT Ratio
11/0.110KV, 10 or 15 VA Burden, 0.5S Accuracy Class properly arranged in
standard MSEDCL approved enclosure, using type A winding insulation (kraft
paper),standard accessories complete with test certificate with losses below
1510 Watts at 50% load, 4300 Watts at 100% load for transformer, as per
IS:1180 (part 1) : 2014 , with necessary permissions of Electrical Inspectors, as
per specification no SS-TR-CS (10-4-2)
19 Supplying and erecting fencing of section having size 2450 mm in height from Each 15 7199.90 107998.50
ground level and 1200 mm width with angle iron frame work erected in CC
foundation and painted complete as per specification no SS-AS/FSG (Fencing
details mentioned in Drawing)(10-6-18)
20 Supplying and erecting fencing of section having size 2450 mm in height from Each 1 6779.90 6779.90
ground level and 1000 mm width with angle iron frame work erected in CC
foundation and painted complete as per specification no SS-AS/FSG (Rate
reduced as per Note.. 6857.00 - 400.00 = 6573.00) (Fencing details mentioned in
Drawing)(10-6-18)
21 Supplying and erecting fencing of section having size 2450 mm in height from Each 2 6359.90 12719.80
ground level and 800 mm width with angle iron frame work erected in CC
foundation and painted complete as per specification no SS-AS/FSG (Rate
reduced as per Note.. 6857.00 - 800.00 = 6173.00) (Fencing details mentioned in
Drawing)(10-6-18)
22 Supplying and erecting fencing of section having size 2450 mm in height from Each 2 6149.90 12299.80
ground level and 700 mm width with angle iron frame work erected in CC
foundation and painted complete as per specification no SS-AS/FSG (Rate
reduced as per Note.. 6857.00 - 1000.00 = 5973.00) (Fencing details mentioned
in Drawing)(10-6-18)
23 Supplying and erecting 50 x 50 x 6 mm angle iron as corner support 2m long Each 4 1425.90 5703.60
fixed at the middle of the fencing frame and the other side inclined at 30
degree angle, in cement concrete foundation of 15 x 15 x 40 cm complete duly
painted with one coat of red oxide and two coats aluminum paint complete.(10-
6-19)
24 Supplying and erecting double leaf hinged door each 1500 mm in width x 1850 Each 1 20613.60 20613.60
mm in height using B class, GI pipe with angle iron supports, chain link wire mesh
(jali) complete supported on channel iron, erected in foundation, and painted
complete as per specification no SS-AS/DLD(10-6-20)
25 Providing printed instruction chart for treating persons suffering from electric Each 1 158.60 158.60
shock, printed in English & Marathi and duly laminated complete.(10-6-22)
26 Providing pair of duly tested rubber hand gloves as per IS :47705 suitable for pair 1 715.10 715.10
working upto 22 kV supply complete.(10-6-23)
27 Supplying standard first aid box with necessary antiseptic cream, medicine for Each 1 932.40 932.40
use on wounds due burn, crepe bandage, gauge bandage, medicated ready to
use bandage (Band-Aid) adhesive tape for medicinal use, scissors, anti-septic
solution, etc. (All above contents shall be of standard makes)(10-6-24)
28 Supplying and fixing PVC synthetic elastomer electrically insulating mat with sqm 4 5387.60 21550.40
class A insulation conforming to IS: 15652 – 2006 having 2 mm thickness upto
3.3 kV (10-6-25) (2 SQM x 2 NOS)
29 Supplying and fixing PVC synthetic elastomer electrically insulating mat with sqm 2 6167.70 12335.40
class B insulation conforming to IS: 15652 – 2006 having 2.5 mm thickness upto
11 kV (10-6-26)
30 Providing Round bottom fire bucket of 9 Litres capacity as per IS : 2546 made Each 8 506.00 4048.00
out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside
and red outside with FIRE Mark on provided stand/ wall hook complete.
(Transformer- 4 Nos & DG Set- 4 Nos)(10-6-24) (Rate adopted as per CSR 2021-
22)
Page 225
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
31 Providing Floor mounting stand for keeping 4 Nos. of FIRE buckets 1500mm in Each 2 3883.00 7766.00
length 900mm in height frame made out of 30x30x4 mm angle iron with cross
supports for legs welded with 4 hooks and duly painted with one coat of red
lead and two coats of silver paint complete.(10-6-25)(Rate adopted as per CSR
2021-22)
32 Supplying, erecting, testing and commissioning of diesel generating set with Each 1 2592474.20 2592474.20
alternator of 320 kVA output continuous rating, 3 phase, 415 V, 50 Hz, 0.8 p.f.,
A.C. supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel
engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12
hours, along with standard accessories, self-excited, self-regulated, screen
protected alternator with static excitation system running at 1500 RPM as per IS
4722-2001 with voltage regulation +/- 5 %, with performance class G2/G3 and
maximum fuel consumption 54.89 ltr/hr @75% loading. Both the engine and
alternator direct coupled on a common fabricated steel base frame and mounted
on anti-vibrating pads, with standard control panel comprising meters,
switchgears, indicators connected with suitable wires/cables, the complete set
enclosed in composite acoustic enclosure as fully assembled integral unit made
of 16 SWG CRCA sheet, sound absorbing material to restrict sound level up to 75
dB at 1.0 m, provided with first filling of oil, diesel not less than 480 ltr etc., on
provided M20 grade CC foundation and obtaining necessary approval from
Electrical Inspector as per specification no. GEN-DG (11-1-19)
33 Supplying, erecting, testing and commissioning of microprocessor based AMF Each 1 296757.40 296757.40
panel suitable for Diesel generating set of above 250 kVA upto 320 kVA capacity
3 phase, 415 V, 50 Hz, A.C. supply with all standard features, safeties etc as per
specification no. GEN-AMF. (11-2-16+N)
34 Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity Each 2 10397.10 20794.20
cartridge type conform to IS 2878 /15683 complete erected with necessary
clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete.
(13-15-1)
35 Excavating Hard murum/Stone metal road by chiselling for preparing pit for cum 15 243.60 3654.00
poles stay or earth plates or for laying cables, pipes & clearing the site by
removing debris & making the site as required complete. (16-1-7)
CSS : 4.0x2.5x1.0 M = 10 CUM
DG SET : 6.0x2.5x1.0 M = 15 CUM
36 Supplying and spreading stone metal 25mm size for 100mm depth above the Sqm 29 107.10 3105.90
ground level complete. (16-2-3)
37 Making Cement concrete foundation in 1:2:4 cement concrete with foundation cum 15 5261.60 78924.00
bolts and nuts complete. (cost of wooden box is included) (for pumps). (16-3-5)
CSS : 3.8x2.3x0.7 M = 6.118 SAY 6.20 CUM
DG SET : 5.5x2.3x0.7 M = 8.855 SAY 9.0 CUM
38 Provision for service connection charges towards Extention of Load (Additional Job 1 783300.00 783300.00
Load) to MSEDCL and Road/Foot Path Cutting Charges to be paid to Local
Municipality.(Charges considered as per Circular Dt: 7/4/2020 isssued by
MSEDCL... Load Sanction Charges (Rs 2,20,000.00) + Underground HT Cable
Service connection Charges (Rs 2,23,000.00) + Processing Charges for HT (Rs
3000.00) + Rs 3,00,000.00 for Road Cutting. Total Charges =Rs 746000.00)
2 1.1.12 Supplying & laying HMS PVC conduit 32mm dia. with necessary accessories in 44 164.90 7,255.60
RCC work/false ceiling/false flooring as per specification no. WG-MA/CC. (FOR
LAYING CAT-6 CABLES THRU FALSE CEILING)
3 1.2.7 Supplying and erecting PVC trunking (PVC casing-n-capping) of size 25 mm Each 25 46.20 1,155.00
with accessories on wall/ceiling as per specification No: WG-MA/CON.
4 1.2.18 Supplying and erecting PVC slotted box trunking of size 75x75 mm. with 230 261.50 46,781.00
accessories on wall/ceiling as per specification No: WG-MA/SLBOX.
5 1.3.2+N Supplying and erecting mains with 1x2.5 sq.mm FRLSH copper PVC insulated 44 32.60 1,434.40
wire laid as Earth WIre Green in Colour in provided conduit/trunking/inside
pole/Bus bars or any other places. as per specification No: WG-MA/BW
6 1.3.3 Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire M 34 93.50 3,179.00
laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per
specification No: WG-MA/BW
7 1.8.22 Supplying and erecting 5m HDMI cord low voltage grade minimum 4k Each 2 2372.00 4,744.00
compliant to be laid in provided conduits with male/female 19 pin HDMI
connectors complete.
8 1.10.2 Supplying and installing Cat-6 LSZH cable suitable for networking as per M 1649 69.30 114,275.70
specification no. WG-COC/NC
9 1.10.16 Supplying and fixing 1 m UTP patch cord of Cat 6 type in position as per Each 42 244.70 10,277.40
specification No. WG-COC/PC
10 1.10.19 Supplying and fixing 3 m UTP patch cord of Cat 6 type in position as per Each 42 351.80 14,775.60
specification No. WG-COC/PC
11 1.12.1 Supplying, installing and testing UTP connector (RJ-45) as per specification No. Each 84 83.00 6,972.00
WG-NAS/UTPC.
12 1.12.4 Supplying and fixing 24 port patch panel with tool-less keystone jacks in M 4 11146.80 44,587.20
provided U Rack complete as per specification no. WG-NAS/PP
13 1.12.17 Supplying and fixing 6U wall mount rack (Dimension-DxWxH – 500x600x367 mm) Each 1 8740.20 8,740.20
as per specification No. WG-NAS/RAK
14 1.12.18 Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 500x600x500 mm) Each 3 9519.30 28,557.90
as per specification No. WG-NAS/RAK
Page 226
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
15 1.12.22 Supplying and fixing 22 U floor mount rack (Dimension-DxWxH – 800x600x1176 Each 1 44454.90 44,454.90
mm) as per specification No. WG-NAS/RAK
16 3.7.1 Supplying, erecting, testing & commissioning of 1 kVA capacity on line pure sine Each 4 27905.90 111,623.60
wave,PWM,IGBT based UPS with 0.8 to unity output pf , single phase input & 1
phase output complete with all protections as per specification no. AP-UPS
(Without batteries)
17 3.7.3 Supplying, erecting, testing & commissioning of 3 kVA capacity on line pure sine Each 1 51640.10 51,640.10
wave,PWM,IGBT based UPS with 0.8 to unity output pf ,single phase input & 1
phase output complete with all protections as per specification no. AP-UPS
(Without batteries)
18 3.8.11 Supplying and erecting 12 V/65Ah SMF battery with battery terminal wire, duly Each 7 7745.90 54,221.30
charged complete with 24 months warranty complete
19 NCSR (RATES AS Supplying & erecting of High definition 4/5 Megapixel IP IR Bullet Camera with Each 9 11283.30 101,549.70
PER I. NO. 19.6.2 following features
OF CSR 23-24) Image Sensor : minimum 1/2.8" Progressive Scan CMOS,
Video Resolution : minimum 2592 x 1520
Video Compression : H.264, H.265 or higher, at least Three individually
configurable stream,
Frame rate : minimum 25 fps at all resolutions,
WDR : minimum 120 dB Wide Dynamic Range,
ONVIF profile conformant,
minimum IR distance : 50m,
Lens Type : 2.8/4/6 mm Lens, fixed focal,
Field of View :
2.8 mm, horizontal FOV 107°, vertical FOV 57°, diagonal FOV 129°
4 mm, horizontal FOV 86°, vertical FOV 47°, diagonal FOV 102°
6 mm, horizontal FOV 55°, vertical FOV 29°, diagonal FOV 65°
Lux sensitivity - minimum 0.2 Lux at color, minimum 0.05 Lux at Black & White,
0.0 Lux (IR) Night Vision Distance minimum IR - 50m.
Camera minimum Adjustment Angles - Pan : 350°, Tilt : 72°, Rotate : 350°.
Power Supply : Support 12VDC & PoE,
IP67, IK10 - Vandal Resistant.
Built in micro SD/SDHC/SDXC card slot of minimum 128 GB,
Built in microphone.
minimum Input/Output - Audio in × 1, Audio Out × 1, Alarm in × 1, Alarm Out × 1.
Events : Privacy Masking, Motion detection, Scene change detection, Face Each 230 0.00 -
capture, Video tampering, audio exception detection, Region entrance detection,
Region exiting detection.
Operating temperature ( -30 to 60° C ) .
Security - User account and password protection, HTTPS, IP filter, IEEE 802.1X,
digest authentication, user access log, TLS1.2, AES - 256, SSH/Telnet closed, FTP
disabled.
Protocol - DHCP, UDP, HTTP, HTTPS, NTP, DNS, RTP, RTSP, SMTP, SSL/TLS, TCP/IP,
Secure Real-Time Transport Protocol (SRTP), Bonjour, SNMP and Secure shell
(SSH) supported protocol.
RoHS, WEEE, ISO-14001 and REACH compliant, UL/EN OR equivalent
BIS/TECH/STQC or any indian standards as applicable, CE, FCC certified.
duly erected in position on wall/ceiling/false ceiling/provided pole (mounting
height not more than 5 meter) etc with all accessories etc complete as per
specification no. CCTV-CAM
20 NCSR (RATES AS Events : Privacy Masking, Motion detection, Scene change detection, Face Each 33 11,140.50 367,636.50
PER I. NO. 19.6.4 capture, Video tampering, audio exception detection, Region entrance detection,
OF CSR 23-24) Region exiting detection.
Operating temperature ( -30 to 60° C ) .
Security - User account and password protection, HTTPS, IP filter, IEEE 802.1X,
digest authentication, user access log, TLS1.2, AES - 256, SSH/Telnet closed, FTP
disabled.
Protocol - DHCP, UDP, HTTP, HTTPS, NTP, DNS, RTP, RTSP, SMTP, SSL/TLS, TCP/IP,
Secure Real-Time Transport Protocol (SRTP), Bonjour, SNMP and Secure shell
(SSH) supported protocol.
RoHS, WEEE, ISO-14001 and REACH compliant, UL/EN OR equivalent
BIS/TECH/STQC or any indian standards as applicable, CE, FCC certified.
duly erected in position on wall/ceiling/false ceiling/provided pole (mounting
height not more than 5 meter) etc with all accessories etc complete as per
specification no. CCTV-CAM.
21 1.11.2 Supplying, fixing, and configuring 8-ports managed gigabit, Layer-2 switch, Each 1 26,756.10 26,756.10
10/100/1000 base-T, POE smart switch plus 2 SFP erected in provided rack
complete.
22 1.11.4 Supplying, fixing, and configuring 24 ports with 4 (SFP+) port, ethernet managed Each 4 42,685.70 170,742.80
switch with web view/CLI, 6KV surge protection on ethernet port and console
port for management in provided rack as per specification no. WG-NWC/GBS
Page 227
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
23 NCSR (RATES AS Supplying, installing, testing & commissioning of 32/40 Ch. Network Video Each 2 47,733.00 95,466.00
PER I. NO. Recorder (NVR), suitable connect Min. 32 IP Cameras, up to 5 Megapixel
19.6.15 OF CSR Resolution, with HDMI/VGA outputs, provided HDMI output of 4K resolution or
23-24) VGA output with output up to 1920 × 1080.
Support H.265 or higher, H.264, MJPEG,
Incoming Bandwidth 250Mbps with minimum 4 SATA Hard Disks, ANR
Technology,
4 SATA interfaces for 4 HDDs and capacity of each HDD up to 8TB,
minimum 02 USB port, Alarm I/O 16/4, RJ-45 10/100/ 1000 Mbps self-adaptive
Ethernet interface,
ONVIF conformance,
Multiple network monitoring: Web viewer .
support protocol TCP/IP, DHCP, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP™,
HTTPS.
RoHS, UL, CE, FCC certified.
duly erected in provided U Rack with wiring connections, tagging and
programming etc. complete as per specification no. CCTV-NVR
24 NCSR (RATES AS Supplying & erecting 8 TB internal Surveillance HDD suitable for SATA Port of Each 8 24,908.10 199,264.80
PER I. NO. NVR, interface transfer rate 6 GB/S, maximum sustained transfer rate 210
19.6.21 OF CSR MB/Sec to 213 MB/S. Drive bay supported 08+, Cameras supported up to 64,
23-24) Cache (MB) 256, Load/Unload Cycle -3000000, Work Load Rating per Year 180TB,
MTBF 1000000 Hrs. HTTPS. RoHS, UL, CE certified, duly erected in position in
provided NVR as per specification no. CCTV-HDD
25 NCSR (RATES AS Supplying & erecting 55" professional LED display with 1920 *1080 ( Full HD) Each 1 70,083.30 70,083.30
PER I. NO. Display, suitable for 32/64 channel NVR and following features
19.6.25 OF CSR Brightness: minimum 500 Cd/m2
23-24) Contrast Ratio: minimum 1000:1
Viewing angle: 178/178 deg.
Response time: maximum 8 ms
Inputs: HDMI, VGA, BNC,USB, Audio In,
Built-in speakers maximum 10 W,
Suitable to operate on 100-240 V 50 Hz AC supply and 24/7 Duty Cycle duly
erected on wall or table top with standard accessories like wall mount stand and
wiring connections etc. complete as per specifications no. CCTV-MON
2 4.8.8+N Supplying and installation of Solar PV Module cleaning unit consisting of nozzles each 1.00 36268.10 36268.10
spray, necessary pipes, valves, post, electronic panel board concealed with
weather proof cabinet, spreading water periodically for removal of dust, related
motor pump, controller, timer and nozzles set suitable for covering 50 KW Solar
PV Module. (Approx. 140 Sq. Mtr. PV Module area).
3 5.5.1+N Providing & erecting 4 Pole MCCB, 415 V, 100A, rated short-circuit breaking each 2.00 6689.30 13378.60
capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed
magnetic setting with provided leads, provision for installation of shunt/UV/trip
alarm contact. MCCB with phase barriers on both sides, insulation withstand
capacity 800V, no line-load bias in provided enclosure/panel as per specification
no. SW-SWR/MCCB
4 5.10.26 Supplying & erecting porcelain/epoxy bus bar support complete erected in each 30.00 72.50 2175.00
provided M.S. box for 100A
5 5.11.17 Supplying and erecting SS enclosure for MCCB suitable for up to 100A MCCB. each 2.00 1033.20 2066.40
6 6.1.19 Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, kg 1080.00 167.00 180360.00
various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc.
for panel board or any other purpose with bending, cutting, drilling and welding
complete erected at the position with necessary materials duly painted with
one coat of red oxide and two coats of enamel paint to match the switchgears or
as per directions by the authority. (40X40X3 MM EQ. ANGLE - Approx. 18 kg per
PV Cell x 60 Nos = 1080 kgs)
7 6.3.4 Supplying and erecting static energy Trivector meter 440 V 50 Hz. 20-100A each 1.00 8653.10 8653.10
ISI mark meter AC 3 phase 4 wires LCD/LED display (Measuring and display
Trivector, V, I, kW, PF, Hz, Last month history of kWh & MD in kW) with special
features like TOD, Tamper logging, Optical Communication Port & Display in
absence of Power complete erected on polished teak wood board duly wired
with required size of weather proof PVC wires duly tested for class 1.0 accuracy
by electric supply company.
Page 228
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
8 6.3.15 Supplying and erecting AC three phase HT CT multifunction net meter DLMS each 1.00 25460.40 25460.40
compliance of accuracy class 0.5, 3 x 240V, 50Hz, with backlit LCD display,
optical port & RS 232 port (measures import kWh, kVAh, export kWh, kVAh, Net
kWh, kVAh, V, I, kW, 6 months history of energy, load survey, TOD, tamper
detection & logging, power ON/OFF events, instantaneous parameters of rating
1/5A with display in absence of power) with wiring connections and mounting
hardware on provided panels complete with calibration certificate from
manufacturer.
9 6.5.2 Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 each 6.00 1078.40 6470.40
ratio with 15 VA burden erected in provided CRCA box duly secured with
insulating materials connected to the meter with test certificates.
10 7.1.4 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed m 30.00 118.70 3561.00
wire armoured (strip) cable 1100 V 2 core 4 sq. mm. aluminium conductor
complete erected with glands & lugs, on wall/ trusses/pole or laid in provided
trench/ pipe as per specification no. CB-LT/AL
11 7.1.32 Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel formed m 75.00 450.90 33817.50
wire armoured (strip) cable 1100 V, 4 core 50 sq. mm. aluminium conductor
complete erected with glands & lugs, on wall/ trusses/pole or laid in provided
trench/ pipe as per specification no. CB-LT/AL
12 9.1.3 Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with each 3.00 6357.80 19073.40
funnel with a wire mesh for watering and brick masonry block C.l. cover
complete with all materials, testing & recording the results as per specification
no. EA-EP (PV System-1, LA-1 & Invertor-1)
13 9.2.3 Supplying and erecting GI strip of high purity required size used for earthing on kg 44.00 233.10 10256.40
wall and/or any other purpose with necessary GI clamps fixed on wall painted
with bituminous paint with joints required. As per specification no EA-EP. (25x3
mm, 0.59 kg/m x 75 m = 44.25 Say 44 kg)
14 9.3.1 Supplying & erecting conventional spike type air termination suitable to carry each 1.00 6382.95 6382.95
lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard
length with 5 Nos. copper spikes fixed on copper ball as air terminals duly
threaded in copper pipe erected on provided foundation complete.
15 9.3.2 Providing and back filling ground enhancing compound 25 kg bag complete. each 3.00 1304.10 3912.30
16 16.3.5 Making cement concrete foundation in 1:2:4 cement concrete with foundation cum 7.00 5261.60 36831.20
bolts and nuts complete. (cost of wooden box is included) cc foundation per
structure (0.3*0.3*0.3*4 Nos =0.108 cum x 60 PV Cells = 6.48 Say 7 cum) for
supports
3 4.8.3 Supplying and erecting two pole power contactor 230 V, 32 A for time switch each 1.00 2484.30 2484.30
complete erected on provided wooden block/ box, with necessary materials.
4 4.8.6 Supplying and erecting programmable digital almanac timer microcontroller each 1.00 6515.30 6515.30
based with real time clock to operate on derived switching “ON” and switching
“OFF” street light as per daily sunset and sunrise respectively automatically
having 4 digit LED continuous time display, relay output 230 V / 10A with 10
hrs. battery backup and manual over drive facility capable to drive different
capacity contactors timer erected in provided M.S. box.
5 5.3.1 Supplying, erecting & marking SPMCB 0.5A to 5A, C-series with rated short - each 15.00 262.50 3937.50
circuit breaking capacity (Icn) 10kA in provided distribution board as per
specification no. SW-SWR/MCB
6 5.3.6 Supplying, erecting & marking DPMCB 6A to 32A, C-series with rated short - each 1.00 561.80 561.80
circuit breaking capacity (Icn) 10kA in provided distribution board as per
specification no. SW-SWR/MCB
7 5.4.13 Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness each 1.00 420.00 420.00
suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle
iron/GI frame.
8 7.1.4 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed m 150.00 118.70 17805.00
wire armoured (strip) cable 1100 V 2 core 4 sq. mm. aluminium conductor
complete erected with glands & lugs, on wall/ trusses/pole or laid in provided
trench/ pipe as per specification no. CB-LT/AL
9 7.1.5 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed m 200.00 133.40 26680.00
wire armoured (strip) cable 1100 V, 2 core 6 sq. mm. aluminium conductor
complete erected with glands & lugs, on wall/ trusses/pole or laid in provided
trench/ pipe as per specification no. CB-LT/AL
10 7.6.9 Supplying and laying (including excavation of suitable width & depth up to 90 m 32.00 220.50 7056.00
cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for
enclosing cable below ground/road surface, to required depth complete.
11 8.2.14 Providing & erecting 7 m high (clear height) galvanised octagonal pole with each 15.00 24876.60 373149.00
foundation bolts having bottom of 200 mm A/F, top 100 mm A/F on provided
foundation as per specification no. OH-PL/OPL
Page 229
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
12 8.2.21 Providing and erecting galvanised 1000mm single arm sword type bracket with each 15.00 2853.90 42808.50
FRP dome and ball as per specification no. OH-PL/PBKT
13 9.1.4 Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod each 15.00 1575.00 23625.00
complete with all materials testing and recording the results as per specification
no. EA-EP
14 9.2.3 Supplying and erecting GI strip of high purity required size used for earthing on kg 18.00 233.10 4195.80
wall and/or any other purpose with necessary GI clamps fixed on wall painted
with bituminous paint with joints required. As per specification no EA-EP. (30 m x
0.59 kg/m = 17.70 kgs, Say 18 kgs)
15 16.1.2 Making trench in Hard murum/Tar road having 0.75 m depth and minimum m 300.00 209.00 62700.00
0.3mtr width as per IS for laying provided cables up to voltage level 1.1Kv cable
complete as per specification No. CW-EXN-CTR
16 16.3.9 Making M- 20 grade reinforced cement concrete foundation by considering the each 15.00 3868.20 58023.00
safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of
steel, concrete, excavation and fixing provided nut bolts with the help of
template, duly plastered as per design complete (for 6m to 8m high octagonal
/conical GI pole).
Carrying out core cutting of size 3" to 5" dia x 15" length in the
C.C./rock/stone wall with the help of specialized core cutting
1 Job 10 7,895.00 78,950.00
machine in proper manner and finishing the site as original..
(CSR No.3-11-77)
Page 230
Ite
SSR Item Supplying, installation, testing andwork
commissioning of main fire
m Item of Quantity Basic Rate Unit Amount
Nos. pump (MFP/DP) suitable for water discharge of 2280 to 2850
No.
LPM at 90 to 60 m head driven by 76 HP or suitable HP
capacity diesel engine at required working speed suitable for
manual/automatic operation and consisting of
following :
(a) Horizontal type, single stage, centrifugal casing pump of cast
iron body & bronze impeller with stainless steel shaft(SS410
grade), mechanical seal conforming to IS 1520.
(b) Water cooled with radiator, diesel engine conforming to
relevant IS standard complete with auto starting mechanism, 12/24
volts DC electric starting equipment with battery of required AH
capacity with necessary charger suitable to work on 230v, 50Hz
AC supply, diesel tank of minimum 150ltr capacity with first
filling of diesel up to 100% level with necessary piping with valves
4 Each 1 629,148.50 629,148.50
up to engine , exhaust pipe extended upto 10 m outside pump
house duly insulated with 50 mm thick glass wool with 1.0 mm
thick aluminium sheet cladding, residential silencer, instruments
and protection as per standard specification, stop solenoid for auto
stop in the event of fault with audio indications etc. as required.
(c) M.S. fabricated common base plate, coupling, coupling guard,
foundation bolts etc. as required.
(d) Erected on provided suitable size cement concrete foundation
duly plastered with anti vibration pads with perfect aligning, proper
levelling complete pump set with engine assembly and
accessories duly painted with two coats of synthetic enamel paint
of fire red colour over a coat of primer (ISC code 536 as per IS
2932
of 2003) complete, as per specification no. FF-MFP/SSC/DP
Supplying, installation, testing and commissioning of booster fire
(CSR No. 13-4-2)
pump [BP] suitable for water discharge of 450 LPM at 35 m
head driven by electric motor 415 volts, 3 phase 50 Hz, AC
supply of 5.5 kW or of suitable kW capacity for
manual/automatic operation and consisting of following :
(a) Horizontal/vertical type, single/multi stage, centrifugal casing
pump of cast iron body & bronze/CI impeller with stainless steel
shaft (SS410 grade), mechanical seal conforming to IS 1520.
(b) Squirrel cage induction motor, TEFC, synchronous speed 3000
RPM, suitable for operation with IP 55 protection for enclosure,
5 horizontal foot mounted type with Class-'F' insulation, conforming Each 1 45,733.80 45,733.80
to IS-325.
(c) M.S. fabricated common base plate, coupling, coupling guard,
foundation bolts etc. as required.
(d) Erected on provided suitable size cement concrete foundation
duly plastered with anti vibration pads with perfect aligning, proper
levelling complete pump set with accessories duly painted with two
coats of synthetic enamel paint of fire red colour over a coat of
primer (ISC code 536 as per IS 2932 of 2003) complete, as per
specification no. FF-MFP/BP
(CSR No.13-3-1)
Supplying and erecting 200 mm dia Cast Iron end line strainer of
Y-type flanged end pattern, PN16 pressure rating, SS screen, end
connection with Flanged / Screwed / Socket Weld / Butt Weld End
6 Each 2 22,086.80 44,173.60
etc with standard OAR (open area Ratio) for positive suction
complete as per specification no. FF-VL/ELS
(CSR No.13-7-8)
Page 231
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
Supplying and erecting G.I. pipe ‘C’ class ERW 200 mm dia with
16 necessary fittings complete as per specification no. FF-PP m 50 3,750.60 187,530.00
(CSR No.13-6-8)
Supplying and erecting 20/25mm dia gun metal air release cock,
with necessary G.I. coupling to be fitted on top of air vessel or on
24 Each 6 882.00 5,292.00
wet riser complete as per specification no. FF-FFA/ARV
(CSR No.13-8-13)
Page 232
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
Supplying and erecting G.I. pipe ‘C’ class ERW 25 mm dia with
35 necessary fittings complete as per specification no. FF-PP m 950 365.40 347,130.00
(CSR No.13-6-2)
Supplying and erecting G.I. pipe ‘C’ class ERW 32 mm dia with
36 necessary fittings complete as per specification no. FF-PP m 50 447.30 22,365.00
(NON CSR)
Supplying and erecting G.I. pipe ‘C’ class ERW 40 mm dia with
37 necessary fittings complete as per specification no. FF-PP m 100 496.70 49,670.00
(NON CSR)
Supplying and erecting G.I. pipe ‘C’ class ERW 50 mm dia with
38 necessary fittings complete as per specification no. FF-PP m 150 740.30 111,045.00
(CSR No.13-6-3)
Supplying and erecting G.I. pipe ‘C’ class ERW 65 mm dia with
39 necessary fittings complete as per specification no. FF-PP m 500 937.70 468,850.00
(CSR No.13-6-4)
Supplying and erecting G.I. pipe ‘C’ class ERW 75/80 mm dia
40 with necessary fittings complete as per specification no. FF-PP m 200 1,171.80 234,360.00
(CSR No.13-6-5)
Supplying and erecting G.I. pipe ‘C’ class ERW 100 mm dia with
41 necessary fittings complete as per specification no. FF-PP m 350 1,667.40 583,590.00
(CSR No.13-6-6)
Supplying and erecting G.I. pipe ‘C’ class ERW 150 mm dia with
42 necessary fittings complete as per specification no. FF-PP m 250 2,529.50 632,375.00
(CSR No.13-6-7)
Supplying and erecting fire resistant mortar (20 kg) with fire
resistance class S90 as per National Electrical Code (NEC) SP30-
2011 suitable to seal the openings of all kinds of cables, pipes and
45 cable support system in steel, aluminium and plastic profiles Job 2 10,546.50 21,093.00
( except hollow core conductors). The residual openings shall be
closed with filler, as per specification no FF-FRM.
(NON CSR )
Page 233
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
copper conductor cable, earth terminals, numbering etc. complete
in all respect, suitable for satisfactory operation of main fire pump
and jockey (pressurisation) pumps (1working+1standby) with
necessary accessories, wiring & cabling along with allied
accessories with following incoming and outgoings, suitable for
automatic & manual operation on 415V, 3 phase, 50Hz ac supply
as per specifications
the capacity of electric motor driven pump are as follows
a. Main fire pump(MFP) having capacity of 30 kW 1 no (1 working)
b. Jockey pump(JP) capacity of suitable capacity 1 nos (1
working+1standby, alternate run per start in auto mode),
comprises of the following features & switchgears:
1. Main incomer FP SFU having rotary handle with HRC fuses of
suitable rating.
2. Electrolytic grade copper strips for busbar of suitable sizes for
main incomer and branches to motor SFU's, starters & outgoing
terminals with necessary accessories like stainless steel nut bolts
with spring washers for connections, mounted on required no of
epoxy or porcelain support insulators of suitable ratings etc.
46 Set 1 309,657.60 309,657.60
3. Individual pump TPN SFU having rotary handle with HRC fuses
of suitable rating.
4. Digital voltmeter & ammeter & RYB indicating lamps & push
buttons & SPP, O/L & phase reversal protection with emergency
stop switch.
5. TPN SPD 100kA Type 1 +2 tested.
6. Required pressure transducer with pressure indication on panel
with cabling required for monitoring & automatic operation of fire
pumps.
7. System controller to control operation of main electric fire pump,
jockey (pressurization) pumps in sequence with interlocking for
operation of pumps as per specification with automatic/manual
operation with selector switch & alternate run of standby Pumps
consisting of relays, timers. sensors, annunciation window for fault
indication, complete as per specification.
8.Suitable capacity electric motor starters for all individual pumps
with necessary push buttons & indications.
9. Siren of required capacity to be activated when main pump
starts & allied accessories as per requirements of local CFO or as
Providing, fixing and testing of 150mm dia alarm check valve (FxF)
with ACV trim set to water motor alarm/gong, retard chamber, UL
Listed/FM approved, complete with drain cock arrangement and
47 with all accessories, welded or screwed as required including Each 1 39,707.90 39,707.90
cutting holes and chased in brick or RCC walls and making good
complete as per approved make & model.
(Non CSR)
Page 234
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
Page 235
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
a. Supplying and installing Auditorium chairs (audi -3 main NOS 400 7875.00 3150000.00
1
chair- make godrej or equivalent )
b. Supplying and installing Podium Desk(other brand or NOS 1 10368.80 10368.80
2
customised )
3 Green Room 0.00 0.00
a. Supplying and installing Bed(FIONA SINGLE BED- make NOS 12 19530.00 234360.00
4
godrej or equivalent )
NOS 8 10500.00 84000.00
5 b. Supplying and installing Dressing Table Chair(other brand
or customised )
NOS 12 16800.00 201600.00
6 c. Supplying and installing Wardrobe(SLIMLINE 2 LOCKER
WITH ROYAL IVORY DOOR- make godrej or equivalent )
d. Supplying and installing Mirror + toilet accessories, NOS 4 10500.00 42000.00
7
curtains(other brand or customised )
NOS 4 12075.00 48300.00
8 e. Supplying and installing Dressinng unit with
chairs(ADRIANA DRESSER WITH STOOL- make godrej or
equivalent )
9 Store room 0.00 0.00
NOS 4 15750.00 63000.00
a. Supplying and installing Steel racks(SINGLE SIDED STEEL
10 BOOK RACK BASE UNIT WITH STAND- make godrej or
equivalent)
b. Supplying and installing Almirah(STOREL PLAIN - make NOS 4 22050.00 88200.00
11
godrej or equivalent)
12 Classrooms/Library 0.00 0.00
NOS 6 15750.00 94500.00
a. Supplying and installing Book Racks(SINGLE SIDED STEEL
13 BOOK RACK BASE UNIT WITH STAND- make godrej or
equivalent
NOS 8 27825.00 222600.00
14 b. Supplying and installing Book case (330x915x1740)(4
DOOR BOOKCASE- make godrej or equivalent)
NOS 1 4200.00 4200.00
15
c. Magezzine Revolving Unit(other brand or customised )
NOS 4 19950.00 79800.00
d. Supplying and installing Periodical display unit
16 (400x900x1800)(ALL STEEL PERIODICAL DISPLAY RACK- make
godrej or equivalent )
e. Supplying and installing Reading table (900x1200)(uno NOS 8 5775.00 46200.00
17
study table- make godrej or equivalent)
Page 236
Ite
SSR Item
m Item of work Quantity Basic Rate Unit Amount
Nos.
No.
NOS 24 3675.00 88200.00
18 f. Supplying and installing Chairs(CAFÉ UNWIND CHAIR-
make godrej or equivalent)
g. Supplying and installing Benches(other brand or NOS 6 7875.00 47250.00
19
customised
NOS 2 26250.00 52500.00
20 a. Supplying and installing Conference table(IDEATE 5
SEATER WITH WIRE MANAGER- make godrej or equivalent
NOS 1 10500.00 10500.00
21 b. Supplying and installing Green board(other brand or
customised )
NOS 10 7864.50 78645.00
22 c. Supplying Chairs(VENTILLO MIB BACK CHAIR- make godrej
or equivalent)
NOS 3 40425.00 121275.00
23 d. Supplying and installing Sofa(3+1+1)(SUPREME 3+1+1
SOFA- make godrej or equivalent)
NOS 1 2310.00 2310.00
24 e. Supplying and installing White board(other brand or
customised )
SQM 7.2 2100.00 15120.00
25
f. Supplying and installing Blinds(other brand or customised )
g. Supplying and installing Coffee table(PRISM COFFEE NOS 3 5880.00 17640.00
26
TABLE- make godrej or equivalent)
27 Admin 0.00 0.00
NOS 6 15225.00 91350.00
28 a. Supplying and installing Tables(STYLO OFFICE TABLE-
make godrej or equivalent)
NOS 8 3360.00 26880.00
29 b. Supplying and installing chairs(CLASSIC CANE CHAIR
WITHOUT ARMREST - make godrej or equivalent)
c. Supplying and installing Visitors chairs(CLASSIC CANE NOS 8 3360.00 26880.00
30 CHAIR WITHOUT ARMREST - make godrej or equivalent)
NOS 10 3675.00 36750.00
31 d. Supplying and installing Waiting chairs(CAFÉ UNWIND
CHAIR- make godrej or equivalent)
e. Supplying and installing Reception Table(TRIDENT JUNIOR NOS 1 20475.00 20475.00
32 2 MAIN DESK- make godrej or equivalent)
f. Supplying and installing Storage- file cabinet(2 DRAWER NOS 5 13650.00 68250.00
33
FILING CABINET- make godrej or equivalent)
Total Work Portion >>>>>> Rs 5,073,153.80
Page 237
Measurement Sheet - CIVIL
SN Perticular Nos L B H Qty Unit
1 Excavation 0-1.5M
F1 67 2.30 2.3 1.5 531.65
531.65 CUM
2 Excavation 1.5-3.0M
F1 67 2.30 2.3 1.5 531.65
531.65 CUM
3 Plinth Filling
1 50.45 30 0.45 681.08
Plinth Beam Qty 235.13
445.95 CUM
4 Soling
Plinth Area 1 50.45 30 0.15 227.03
F1 67 2.30 2.3 0.15 53.16
280.19 CUM
5 PCC
F1 67 2.30 2.3 0.15 53.16
53.16 CUM
6 Brickwork Below Plinth Beam
7 50.45 0.6 0.75 158.92
10 30.00 0.6 0.75 135.00
293.92 CUM
9 RCC column
A Upto Plinth
C1 67 0.60 0.6 2.25 54.27
54.27 CUM
B BASEMENT FLOOR
C1 67 0.60 0.6 4.65 112.16
112.16 CUM
B GROUND FLOOR
C1 67 0.60 0.6 3.45 83.21
83.21 CUM
C FIRST FLOOR
C1 67 0.60 0.6 4.05 97.69
97.69 CUM
Page 238
SN Perticular Nos L B H Qty Unit
D SECOND FLOOR
C1 67 0.60 0.6 4.05 97.69
97.69 CUM
E Terrce Floor
C1 67 0.60 0.6 4.05 97.69
97.69 CUM
F Above Terrce Floor
C1 7 0.60 0.6 4.2 10.58
10.58 CUM
10 RCC of Beam
Plinth Beam 7 50.45 0.6 0.6 127.13
10 30.00 0.6 0.6 108.00
235.13 CUM
Page 239
SN Perticular Nos L B H Qty Unit
11 RCC of Slab
Plinth Slab 1 50.45 30 0.15 227.03 CUM
Basement Slab 1 1105.53 SQM 0.15 165.83
Basement Slab 1 382.40 SQM 0.15 57.36
223.19 CUM
Ramp 1 30.93 4.775 0.15 22.15 CUM
Ground Floor 1 1396.25 SQM 0.15 209.44 CUM
First Floor 1 1564.22 SQM 0.15 234.63 CUM
Second Floor 1 891.00 SQM 0.15 133.65 CUM
Terrace Floor 1 891.00 SQM 0.15 133.65 CUM
Slab Above Terecce
Headroom 1 31.38 SQM 0.15 4.71
Tank 1 10.56 SQM 0.15 1.58
Tank 1 3.95 SQM 0.15 0.59
6.88 CUM
12 RCC of Lintel
Basement Floor(Parking)
0.00 CUM
Basement Floor(Slit)
D 1 1.80 0.23 0.35 0.14
D1 2 1.50 0.23 0.35 0.24
D2 4 1.20 0.23 0.35 0.39
D3 5 1.10 0.23 0.35 0.44
W 3 1.80 0.23 0.35 0.43
W1 1 1.50 0.23 0.35 0.12
W2 1 1.20 0.23 0.35 0.10
W3 1 2.30 0.23 0.35 0.19
V 5 0.90 0.23 0.35 0.36
2.42 CUM
Ground Floor
D 5 2.30 0.23 0.35 0.93
D1 1 1.80 0.23 0.35 0.14
D2 5 1.50 0.23 0.35 0.60
D3 6 1.10 0.23 0.35 0.53
W 1 3.80 0.23 0.35 0.31
W1 17 3.30 0.23 0.35 4.52
W2 1 2.30 0.23 0.35 0.19
W3 2 1.50 0.23 0.35 0.24
V 2 0.90 0.23 0.35 0.14
7.60 CUM
First Floor
D 2 2.30 0.23 0.35 0.37
D1 4 1.80 0.23 0.35 0.58
D2 9 1.50 0.23 0.35 1.09
D3 9 1.10 0.23 0.35 0.80
W 10 3.30 0.23 0.35 2.66
W1 1 2.30 0.23 0.35 0.19
W2 1 1.50 0.23 0.35 0.12
W3 4 1.80 0.23 0.35 0.58
Page 240
SN Perticular Nos L B H Qty Unit
V 5 0.90 0.23 0.35 0.36
6.74 CUM
Second Floor
D 2 1.80 0.23 0.35 0.29
D1 10 1.50 0.23 0.35 1.21
D2 1 1.20 0.23 0.35 0.10
D3 6 1.10 0.23 0.35 0.53
W 7 3.30 0.23 0.35 1.86
W1 6 2.30 0.23 0.35 1.11
W2 1 1.80 0.23 0.35 0.14
W3 1 1.50 0.23 0.35 0.12
W4 1 2.70 0.23 0.35 0.22
V 1 0.90 0.23 0.35 0.07
5.65 CUM
Terrace Floor
D 1 1.80 0.23 0.35 0.14
D1 1 1.50 0.23 0.35 0.12
D2 2 1.20 0.23 0.35 0.19
0.46 CUM
First Floor
W 10 3.30 0.6 0.1 1.98
W1 1 2.30 0.6 0.1 0.14
W2 1 1.50 0.6 0.1 0.09
W3 4 1.80 0.6 0.1 0.43
V 5 0.90 0.6 0.1 0.27
2.91 CUM
Second Floor
Page 241
SN Perticular Nos L B H Qty Unit
W 7 3.30 0.6 0.1 1.39
W1 6 2.30 0.6 0.1 0.83
W2 1 1.80 0.6 0.1 0.11
W3 1 1.50 0.6 0.1 0.09
W4 1 2.70 0.6 0.1 0.16
V 1 0.90 0.6 0.1 0.05
2.63 CUM
Terrace Floor
0.00 CUM
C Ground Floor
Lift Wall 3 2.50 0.23 3.45 5.95
Lift Wall 2 5.10 0.23 3.45 8.09
Good Lift Wall 2 2.61 0.23 3.45 4.14
2 2.55 0.23 3.45 4.05
2 2.55 0.23 3.45 4.04
2 1.43 0.23 3.45 2.27
28.54 CUM
D First Floor
Lift Wall 3 2.50 0.23 4.05 6.99
Lift Wall 2 5.10 0.23 4.05 9.50
Good Lift Wall 2 2.61 0.23 4.05 4.86
2 2.55 0.23 4.05 4.75
2 2.55 0.23 4.05 4.74
2 1.43 0.23 4.05 2.66
1 4.77 0.23 4.05 4.44
37.95 CUM
E Second Floor
Lift Wall 3 2.50 0.23 4.05 6.99
Lift Wall 2 5.10 0.23 4.05 9.50
Good Lift Wall 2 2.61 0.23 4.05 4.86
2 2.55 0.23 4.05 4.75
Page 242
SN Perticular Nos L B H Qty Unit
2 2.55 0.23 4.05 4.74
2 1.43 0.23 4.05 2.66
4.05 33.51 CUM
F Terrace Floor
Lift Wall 3 2.50 0.23 4.05 6.99
Lift Wall 2 5.10 0.23 4.05 9.50
Good Lift Wall 2 2.61 0.23 4.05 4.86
2 2.55 0.23 4.05 4.75
2 2.55 0.23 4.05 4.74
2 1.43 0.23 4.05 2.66
33.51 CUM
F Above Terrace Floor
Lift Wall 3 2.50 0.23 4.2 7.25
Lift Wall 2 5.10 0.23 4.2 9.85
Good Lift Wall 2 2.61 0.23 4.2 5.04
2 2.55 0.23 4.2 4.93
2 2.55 0.23 4.2 4.92
2 1.43 0.23 4.2 2.76
Tank 2 5.23 0.23 3 7.21
2 6.02 0.23 3 8.30
50.26 CUM
15 RCC Steps
Basement Floor
Staircase 1
Steps 22 0.17 0.3 2.1 1.16
Waist Slab 2 4.12 0.15 2.1 2.60
Staircase 2
Steps 18 0.17 0.25 1.5 0.56
Waist Slab 2 3.03 0.15 1.5 1.36
Ticket Counter
Steps 9 0.17 0.3 12.765 2.88
Waist Slab 1 3.10 0.15 12.765 5.94
14.50 CUM
Ground Floor
Staircase 1
Steps 22 0.17 0.3 2.1 1.16
Waist Slab 2 4.12 0.15 2.1 2.60
Staircase 2
Steps 18 0.17 0.25 1.5 0.56
Waist Slab 2 3.03 0.15 1.5 1.36
5.68 CUM
First Floor
Staircase 1
Steps 22 0.17 0.3 2.1 1.16
Waist Slab 2 4.12 0.15 2.1 2.60
Staircase 2
Steps 18 0.17 0.25 1.5 0.56
Page 243
SN Perticular Nos L B H Qty Unit
Waist Slab 2 3.03 0.15 1.5 1.36
Stage Stair
Steps 12 0.17 0.3 1.5 0.45
Waist Slab 2 2.07 0.15 1.5 0.93
Audi. Stair
Steps 18 0.43 SQM 19.85 152.92
159.98 CUM
Second Floor
Staircase 1
Steps 22 0.17 0.3 2.1 1.16
Waist Slab 2 4.12 0.15 2.1 2.60
Staircase 2
Steps 18 0.17 0.25 1.5 0.56
Waist Slab 2 3.03 0.15 1.5 1.36
Audi. Stair
Steps 12 0.17 0.3 1.5 0.45
Waist Slab 2 2.07 0.15 1.5 0.93
7.06 CUM
Terrace floor
Staircase 1
Steps 22 0.17 0.3 2.1 1.16
Waist Slab 2 4.12 0.15 2.1 2.60
3.75 CUM
16 RCC Coping
Basement Floor(Parking)
0.00 CUM
Basement Floor(Slit)
W 3 1.80 0.6 0.15 0.49
W1 1 1.50 0.6 0.15 0.13
W2 1 1.20 0.6 0.15 0.11
W3 1 2.30 0.6 0.15 0.21
V 5 0.90 0.6 0.15 0.40
1.34 CUM
Ground Floor
W 1 3.80 0.6 0.15 0.34
W1 17 3.30 0.6 0.15 5.05
W2 1 2.30 0.6 0.15 0.21
W3 2 1.50 0.6 0.15 0.27
V 2 0.90 0.6 0.15 0.16
6.03 CUM
First Floor
W 10 3.30 0.6 0.15 2.97
W1 1 2.30 0.6 0.15 0.21
W2 1 1.50 0.6 0.15 0.13
W3 4 1.80 0.6 0.15 0.65
V 5 0.90 0.6 0.15 0.40
Page 244
SN Perticular Nos L B H Qty Unit
4.37 CUM
Second Floor
W 7 3.30 0.6 0.15 2.08
W1 6 2.30 0.6 0.15 1.24
W2 1 1.80 0.6 0.15 0.16
W3 1 1.50 0.6 0.15 0.13
W4 1 2.70 0.6 0.15 0.24
V 1 0.90 0.6 0.15 0.08
3.94 CUM
Terrace floor
0.00 CUM
First Floor
4 5.11 0.15 4.05 12.41
12 6.01 0.15 4.05 43.78
2 10.66 0.15 4.05 12.95
8 4.55 0.15 4.05 22.11
91.26 CUM
Second Floor
4 5.11 0.15 4.05 12.41
12 6.01 0.15 4.05 43.78
2 10.66 0.15 4.05 12.95
4 3.55 0.15 4.05 8.63
2 20.45 0.15 4.05 24.85
102.62 CUM
Terrace Floor
0.00 CUM
18 230mm Thick Wall
Basement(Parking)
1 4.81 0.23 4.65 5.14
13 5.11 0.23 4.65 70.99
1 7.81 0.23 4.65 8.35
1 7.96 0.23 4.65 8.51
1 6.27 0.23 4.65 6.70
6 4.55 0.23 4.65 29.20
3 4.33 0.23 4.65 128.89
2 7.81 0.23 4.65 16.70
1 13.52 0.23 4.65 14.45
2 2.04 0.23 4.65 4.36
2 5.11 0.23 4.65 10.92
304.22 CUM
Page 245
SN Perticular Nos L B H Qty Unit
Deduction
Opening 3 1.20 2.1 0.23 1.74
302.48 CUM
Basement(Slit)
1 4.85 0.23 3.45 3.84
5 5.11 0.23 3.45 20.26
3 6.01 0.23 3.45 14.30
1 7.96 0.23 3.45 6.32
1 1.49 0.23 3.45 1.18
1 2.55 0.23 3.45 2.02
1 2.67 0.23 3.45 2.11
1 5.33 0.23 3.45 4.23
8 4.33 0.23 3.45 27.46
6 4.55 0.23 3.45 21.66
1 2.04 0.23 3.45 1.62
2 5.11 0.23 3.45 8.10
1 5.00 0.23 3.45 3.97
2 3.60 0.23 3.45 5.71
2 6.01 0.23 3.45 9.53
1 5.71 0.23 3.45 4.53
1 1.27 0.23 3.45 1.00
Compound wall 1 7.73 0.23 3.45 6.13
1 16.27 0.23 3.45 12.91
1 6.23 0.23 3.45 4.94
Ticket counter 1 1.80 0.23 3.45 1.43
1 3.15 0.23 3.45 2.50
165.75 CUM
Deduction
D 1 1.50 2.1 0.23 0.72
D1 2 1.20 2.1 0.23 1.16
D2 2 0.90 2.1 0.23 0.87
W 3 1.50 1.5 0.23 1.55
W1 1 1.20 1.2 0.23 0.33
W2 1 0.90 1.2 0.23 0.25
W3 1 2.00 1.5 0.23 0.69
V 1 0.60 0.6 0.23 0.08
5.66 CUM
160.09 CUM
C Ground Floor
1 4.85 0.23 4.05 4.51
12 5.11 0.23 4.05 57.07
1 7.81 0.23 4.05 7.27
1 7.96 0.23 4.05 7.41
1 1.27 0.23 4.05 1.18
1 1.72 0.23 4.05 1.60
1 2.67 0.23 4.05 2.48
1 2.55 0.23 4.05 2.37
1 5.56 0.23 4.05 5.17
1 3.01 0.23 4.05 2.80
13 4.55 0.23 4.05 55.10
Page 246
SN Perticular Nos L B H Qty Unit
5 4.33 0.23 4.05 20.14
7 6.01 0.23 4.05 39.16
1 5.71 0.23 4.05 5.32
1 1.55 0.23 4.05 1.44
1 22.83 0.23 4.05 21.26
1 11.54 0.23 4.05 10.74
1 3.46 0.23 4.05 3.22
2 2.04 0.23 4.05 3.80
1 1.23 0.23 4.05 1.15
1 3.60 0.23 4.05 3.35
256.57 CUM
Deduction
D 5 2.00 2.1 0.23 4.83
D1 1 1.50 2.1 0.23 0.72
D2 5 1.20 2.1 0.23 2.90
W1 17 3.00 2 0.23 23.46
W2 1 2.00 1.5 0.23 0.69
W3 2 1.20 1.2 0.23 0.66
33.26 CUM
223.31 CUM
D First Floor
1 4.81 0.23 4.05 4.48
7 5.11 0.23 4.05 33.29
1 6.91 0.23 4.05 6.43
1 6.01 0.23 4.05 5.59
1 7.96 0.23 4.05 7.41
3 4.33 0.23 4.05 12.09
8 4.55 0.23 4.05 33.91
2 2.04 0.23 4.05 3.80
1 2.00 0.23 4.05 1.86
2 1.77 0.23 4.05 3.30
1 30.93 0.23 4.05 28.81
1 4.48 0.23 4.05 4.17
1 5.56 0.23 4.05 5.17
1 2.90 0.23 4.05 2.70
1 3.91 0.23 4.05 3.64
1 1.43 0.23 4.05 1.33
1 21.49 0.23 4.05 20.01
2 1.77 0.23 4.05 3.30
1 14.99 0.23 4.05 13.96
2 1.77 0.23 4.05 3.30
2 2.33 0.23 4.05 4.34
1 2.55 0.23 4.05 2.37
1 2.78 0.23 4.05 2.59
1 3.71 0.23 4.05 3.46
211.32 CUM
Deduction
D 2 2.00 2.1 0.23 1.93
D1 4 1.50 2.1 0.23 2.90
Page 247
SN Perticular Nos L B H Qty Unit
D2 9 1.20 2.1 0.23 5.22
D3 2 1.20 2.1 0.23 1.16
W1 1 2.00 1.5 0.23 0.69
W2 1 1.20 1.2 0.23 0.33
W3 4 1.50 1.5 0.23 2.07
V 2 0.60 0.6 0.23 0.17
14.46 CUM
196.85 CUM
E Second Floor
1 4.81 0.23 4.05 4.48
6 5.11 0.23 4.05 28.54
1 6.91 0.23 4.05 6.43
1 6.01 0.23 4.05 5.59
1 7.96 0.23 4.05 7.41
2 4.33 0.23 4.05 8.06
7 4.55 0.23 4.05 29.67
1 3.83 0.23 4.05 3.56
2 2.04 0.23 4.05 3.80
1 1.00 0.23 4.05 0.93
1 1.27 0.23 4.05 1.18
1 1.72 0.23 4.05 1.60
1 2.55 0.23 4.05 2.37
1 2.67 0.23 4.05 2.48
1 2.78 0.23 4.05 2.59
1 5.56 0.23 4.05 5.17
1 30.70 0.23 4.05 28.60
6 2.60 0.23 4.05 14.50
6 1.77 0.23 4.05 9.89
1 30.93 0.23 4.05 28.81
2 4.40 0.23 4.05 8.20
2 1.37 0.23 4.05 2.56
1 5.46 0.23 4.05 5.09
172.07 CUM
Deduction
D 2 1.50 2.1 0.23 1.45
D1 9 1.20 2.1 0.23 5.22
D2 1 0.90 2.1 0.23 0.43
W 7 3.00 2 0.23 9.66
W1 6 2.00 1.5 0.23 4.14
W2 1 1.50 1.5 0.23 0.52
W3 1 1.20 1.2 0.23 0.33
V 1 0.60 0.6 0.23 0.08 CUM
21.83 CUM
150.24 CUM
F Terrace Floor
4 4.55 0.23 4.2 17.58
1 5.11 0.23 4.2 4.93
2 1.39 0.23 4.2 2.68
2 5.55 0.23 4.2 10.72
Page 248
SN Perticular Nos L B H Qty Unit
2 2.78 0.23 4.2 5.37
1 4.56 0.23 1.2 1.26
1 4.33 0.23 1.2 1.19
1 13.52 0.23 1.2 3.73
47.46 CUM
Deduction
D 1 1.50 2.1 0.23 0.72
D1 1 1.20 2.1 0.23 0.58
D2 1 0.90 2.1 0.23 0.43
1.74 CUM
45.73 CUM
19 Brickwork 150MM Thick
Basement Floor(Parking) 0.00 CUM
Terrace Floor
1 5.33 0.15 4.2 3.36
1 5.11 0.15 4.2 3.22
6 6.01 0.15 4.2 22.70
2 3.85 0.15 4.2 4.85
1 10.66 0.15 4.2 6.72
1 20.45 0.15 4.2 12.88
53.73 CUM
Basement Floor(Slit)
2 5.16 3.45 35.60
2 6.01 3.45 41.44
1 5.71 3.45 19.69
Planter bed 1 0.75 0.4 0.30
1 11.00 0.4 4.40
Planter bed 2 1.50 0.4 1.20
1 12.68 0.4 5.07
2 1.20 0.4 0.96
2 2.67 0.4 2.13
1 4.77 3.45 16.44
2 3.72 3.45 25.63
2 1.40 3.45 9.66
1 1.95 3.45 6.73
1 1.72 3.45 5.93
175.19 SQM
Page 249
SN Perticular Nos L B H Qty Unit
Deduction
D2 2 0.90 2.1 3.78
D3 5 0.80 1.8 7.20
V 4 0.60 0.6 1.44
12.42 SQM
162.77 SQM
Deduction
D2 6 0.80 2.1 10.08
W 1 3.50 2 7.00
V 2 0.60 0.6 0.72
17.80
44.94 SQM
First Floor
1 4.77 4.05 19.30
3 1.50 4.05 18.22
2 1.20 4.05 9.72
1 3.83 4.05 15.50
1 5.12 4.05 20.72
1 2.55 4.05 10.33
93.78 SQM
Deduction
D2 7 0.80 2.1 11.76
W 1 3.50 2 7.00
V 2 0.60 0.6 0.72
19.48
74.30 SQM
Second Floor
1 3.54 4.05 14.34
2 2.10 4.05 17.01
1 3.05 4.05 12.33
1 4.25 4.05 17.19
1 4.82 4.05 19.50
3 1.25 4.05 15.13
3 2.10 4.05 25.52
95.50 SQM
Deduction
D2 7 0.80 2.1 11.76
D1 1 1.20 2.1 2.52
W 1 2.40 1.5 3.60
17.88
77.62 SQM
terrace
Page 250
SN Perticular Nos L B H Qty Unit
3 5.11 1.2 18.38
1 6.91 1.2 8.29
1 6.01 1.2 7.21
1 7.96 1.2 9.55
1 4.33 1.2 5.19
4 4.55 1.2 21.84
70.46 SQM
21 Internal Plaster
A Basement Floor(Parking)
1 180.85 RMT 4.65 840.95
1 30.03 RMT 4.65 139.64
Plumbing Shaft 1 15.14 RMT 4.65 70.40
1050.99 SQM
B Basement Floor(Slit)
Lobby 1 2.55 2.99 3.45 38.20
1 5.33 3 3.45 57.45
Electric room 1 2.38 4.76 3.45 49.27
Meter room 1 3.05 4.76 3.45 53.89
WC 1 1.72 2.66 3.45 30.22
WC 3 1.17 1.4 3.45 53.20
Toilet (F) 1 1.30 3.711 3.45 34.58
1 1.10 1.82 3.45 20.15
Toilet (M) 1 1.47 1.828 3.45 22.74
Passage 1 1.82 6.985 3.45 60.75
1 0.90 1.95 3.45 19.67
Maintance Room 1 3.59 3.54 3.45 49.20
Survieelance 1 5.55 5.26 3.45 74.59
1 101.00 RMT 3.45 348.45
1 18.92 RMT 3.45 65.27
1 29.10 RMT 3.45 100.40
1 30.03 RMT 3.45 103.60
3 4.55 RMT 3.45 47.09
1 5.31 RMT 3.45 18.32
1 2.78 RMT 3.45 9.58
2 1.32 RMT 3.45 9.07
1 5.33 RMT 3.45 18.37
1 5.11 RMT 3.45 17.62
Plumbing Shaft 1 9.19 RMT 4.65 42.73
Open to Sky Courtyard 1 47.46 RMT 4.65 220.69
1565.09 SQM
D 1 1.50 2.1 3.15
D1 2 1.20 2.1 5.04
D2 4 0.90 2.1 7.56
D3 5 0.80 1.8 7.20
W 3 1.50 1.5 6.75
W1 1 1.20 1.2 1.44
W2 1 0.90 1.2 1.08
W3 1 2.00 1.5 3.00
V 5 0.60 0.6 1.80
37.02
Page 251
SN Perticular Nos L B H Qty Unit
1528.07 SQM
B Ground Floor
Multipurpose hall 1 16.45 24.77 4.05 333.84
Art gallray 1 22.60 11.535 4.05 276.48
Classroom 1 12.68 9.775 4.05 181.90
Toilet (F) 1 3.93 4.765 4.05 70.44
wc 4 1.50 1.07 4.05 83.27
Toilet (M) 1 20.64 RMT 4.05 83.59
1 197.15 RMT 4.05 798.46
WC 2 1.80 1.2 4.05 48.60
Store 1 5.32 2.26 4.05 61.40
1 14.76 RMT 4.05 59.79
Plumbing Shaft 1 9.19 RMT 4.05 37.22
2034.98 SQM
Deduction
D 5 2.00 2.1 21.00
D1 1 1.50 2.1 3.15
D2 5 1.20 2.1 12.60
D3 6 0.80 1.8 8.64
W 1 3.50 2 7.00
W1 17 3.00 2 102.00
W2 1 2.00 1.5 3.00
W3 2 1.20 1.2 2.88
V 2 0.60 0.6 0.72
160.99
1873.99 SQM
B First Floor
Store room 1 31.85 RMT 4.05 128.99
Green room-1 1 4.30 4.88 4.05 74.36
1 1.77 4.77 4.05 52.97
Toilet 2 2.55 2.327 4.05 79.01
Lobby 1 2.55 2.89 4.05 44.03
Passage 1 58.83 RMT 4.05 238.26
Corriodor 202.22 RMT 4.05 0.00
Green room-1 1 5.33 4.546 4.05 79.96
Toilet 1 1.35 3.11 4.05 36.13
Guest Room 1 3.86 5.115 4.05 72.70
Toilet(F) 1 3.93 4.765 4.05 70.43
WC 4 1.50 1.13 4.05 85.21
WC 2 1.80 1.2 4.05 48.60
Toilet(M) 1 20.73 RMT 4.05 83.96
Auditorium 1 30.25 19.7 4.05 404.59
1 14.76 RMT 4.05 59.79
1 5.33 3 4.05 67.44
Plumbing Shaft 1 9.19 RMT 4.05 37.22
1663.64 SQM
Deduction
D 2 2.00 2.1 8.40
D1 4 1.50 2.1 12.60
D2 9 1.20 2.1 22.68
Page 252
SN Perticular Nos L B H Qty Unit
D3 9 0.80 1.8 12.96
W 10 3.00 2 60.00
W1 1 2.00 1.5 3.00
W2 1 1.20 1.2 1.44
W3 4 1.50 1.5 9.00
V 5 0.60 0.6 1.80
131.88
1531.76 SQM
B Second Floor
1 63.63 RMT 4.05 257.70
VIP lobby 1 2.55 2.89 4.05 44.03
Toilet 1 1.35 2.81 4.05 33.70
Room 1 1 3.86 4.81 4.05 70.23
Toilet 3 1.35 2.1 4.05 83.84
Room 2,3,4 3 20.27 RMT 4.05 246.28
AHU 1 6.45 4.81 4.05 91.21
AHU 1 4.12 2.93 4.05 57.11
Auditorium 1 34.25 19.55 4.05 435.78
Dormatory 1 5.54 4.76 4.05 83.43
WC 3 2.10 1.12 4.05 78.25
1 16.22 RMT 4.05 65.69
Store 1 5.32 2.26 4.05 61.40
Corriodor 1 234.58 RMT 4.05 950.05
Projector room 1 17.01 RMT 4.05 68.87
1 5.33 3.03 4.05 67.68
Plumbing Shaft 1 9.19 RMT 4.05 37.22
2732.45 SQM
Deduction
D 2 1.50 2.1 6.30
D1 10 1.20 2.1 25.20
D2 1 0.90 2.1 1.89
D3 6 0.80 1.8 8.64
W 7 3.00 2 42.00
W1 6 2.00 1.5 18.00
W2 1 1.50 1.5 2.25
W3 1 1.20 1.2 1.44
W4 1 2.40 1.5 3.60
V 1 0.60 0.6 0.36
109.68
2622.77 SQM
B Terrace Floor
1 32.88 RMT 1.2 39.46
3 26.72 RMT 1.2 96.19
1 5.11 RMT 1.2 6.13
1 13.52 RMT 1.2 16.22
1 9.78 RMT 1.2 11.73
1 35.55 20.15 4.2 467.88
637.61 SQM
Deduction
D 1 1.50 2.1 3.15
Page 253
SN Perticular Nos L B H Qty Unit
D1 1 1.20 2.1 2.52
D2 1 0.90 2.1 1.89
7.56
630.05 SQM
22 Ceiling Plaster
Basement Slab 1 1105.53 SQM 1105.53
Basement Slab 1 382.40 SQM 382.40
1487.93 SQM
Ground Floor 1 1396.25 SQM 1396.25 SQM
First Floor 1 1564.22 SQM 1564.22 SQM
Second Floor 1 891.00 SQM 891.00 SQM
Terrace Floor 1 891.00 SQM 891.00 SQM
Slab Above Terecce 0.00 SQM
23 External Plaster
Basement Floor(Parking) 0.00
0.00 SQM
Basement Floor(Slit)
1 160.90 3.45 555.11
555.11 SQM
Ground Floor
1 160.90 4.05 651.65
651.65 SQM
First Floor
1 160.90 4.05 651.65
651.65 SQM
Second Floor
1 160.90 4.05 651.65
651.65 SQM
Above Terrace Floor
1 110.75 RMT 1.2 132.90
1 32.85 RMT 1.2 39.42
1 13.52 RMT 1.2 16.22
1 9.78 RMT 1.2 11.73
200.27 SQM
Page 254
SN Perticular Nos L B H Qty Unit
W 3 1.80 0.45 2.43
W1 1 1.50 0.45 0.68
W2 1 1.20 0.45 0.54
W3 1 2.30 0.45 1.04
V 5 0.90 0.45 2.03
13.50 CUM
Ground Floor
D 5 2.30 0.45 5.18
D1 1 1.80 0.45 0.81
D2 5 1.50 0.45 3.38
D3 6 1.10 0.45 2.97
W 1 3.80 0.45 1.71
W1 17 3.30 0.45 25.24
W2 1 2.30 0.45 1.04
W3 2 1.50 0.45 1.35
V 2 0.90 0.45 0.81
42.48 CUM
First Floor
D 2 2.30 0.45 2.07
D1 4 1.80 0.45 3.24
D2 9 1.50 0.45 6.08
D3 9 1.10 0.45 4.46
W 10 3.30 0.45 14.85
W1 1 2.30 0.45 1.04
W2 1 1.50 0.45 0.68
W3 4 1.80 0.45 3.24
V 5 0.90 0.45 2.03
37.67 CUM
Second Floor
D 2 1.80 0.45 1.62
D1 10 1.50 0.45 6.75
D2 1 1.20 0.45 0.54
D3 6 1.10 0.45 2.97
W 7 3.30 0.45 10.40
W1 6 2.30 0.45 6.21
W2 1 1.80 0.45 0.81
W3 1 1.50 0.45 0.68
W4 1 2.70 0.45 1.21
V 1 0.90 0.45 0.40
31.59 CUM
Terrace Floor
D 1 1.80 0.45 0.81
D1 1 1.50 0.45 0.68
D2 1 1.20 0.45 0.54
2.03 CUM
25 Groove in Plaster
Basement Floor(Parking) 1 160.90 160.90
Basement Floor(Slit) 1 160.90 160.90
Page 255
SN Perticular Nos L B H Qty Unit
Ground Floor 1 160.90 160.90
First Floor 1 160.90 160.90
Second Floor 1 160.90 160.90
Terrace Floor 1 160.90 160.90 RMT
26 Chicken Mesh
A Basement Floor(Parking)
1 180.85 RMT 180.85
1 30.03 RMT 30.03
Plumbing Shaft 1 15.14 RMT 15.14
226.02 SQM
B Basement Floor(Slit)
Lobby 1 2.55 2.99 11.07
1 5.33 3 16.65
Electric room 1 2.38 4.76 14.28
Meter room 1 3.05 4.76 15.62
WC 1 1.72 2.66 8.76
WC 3 1.17 1.4 15.42
Toilet (F) 1 1.30 3.711 10.02
1 1.10 1.82 5.84
Toilet (M) 1 1.47 1.828 6.59
Passage 1 1.82 6.985 17.61
1 0.90 1.95 5.70
Maintance Room 1 3.59 3.54 14.26
Survieelance 1 5.55 5.26 21.62
1 101.00 RMT 101.00
1 18.92 RMT 18.92
1 29.10 RMT 29.10
1 30.03 RMT 30.03
3 4.55 RMT 13.65
1 5.31 RMT 5.31
1 2.78 RMT 2.78
2 1.32 RMT 2.63
1 5.33 RMT 5.33
1 5.11 RMT 5.11
Plumbing Shaft 1 9.19 RMT 9.19
Open to Sky Courtyard 1 47.46 RMT 47.46
433.94 SQM
B Ground Floor
Multipurpose hall 1 16.45 24.77 82.43
Art gallray 1 22.60 11.535 68.27
Classroom 1 12.68 9.775 44.91
Toilet (F) 1 3.93 4.765 17.39
wc 4 1.50 1.07 20.56
Toilet (M) 1 20.64 RMT 20.64
1 197.15 RMT 197.15
WC 2 1.80 1.2 12.00
Store 1 5.32 2.26 15.16
1 14.76 RMT 14.76
Page 256
SN Perticular Nos L B H Qty Unit
Plumbing Shaft 1 9.19 RMT 9.19
502.46 SQM
B First Floor
Store room 1 31.85 RMT 31.85
Green room-1 1 4.30 4.88 18.36
1 1.77 4.77 13.08
Toilet 2 2.55 2.327 19.51
Lobby 1 2.55 2.89 10.87
Passage 1 58.83 RMT 58.83
Corriodor 1 202.22 RMT 202.22
Green room-1 1 5.33 4.546 19.74
Toilet 1 1.35 3.11 8.92
Guest Room 1 3.86 5.115 17.95
Toilet(F) 1 3.93 4.765 17.39
WC 4 1.50 1.13 21.04
WC 2 1.80 1.2 12.00
Toilet(M) 1 20.73 RMT 20.73
Auditorium 1 30.25 19.7 99.90
1 14.76 RMT 14.76
1 5.33 3 16.65
Plumbing Shaft 1 9.19 RMT 9.19
613.00 SQM
B Second Floor
1 63.63 RMT 63.63
VIP lobby 1 2.55 2.89 10.87
Toilet 1 1.35 2.81 8.32
Room 1 1 3.86 4.81 17.34
Toilet 3 1.35 2.1 20.70
Room 2,3,4 3 20.27 RMT 60.81
AHU 1 6.45 4.81 22.52
AHU 1 4.12 2.93 14.10
Auditorium 1 34.25 19.55 107.60
Dormatory 1 5.54 4.76 20.60
WC 3 2.10 1.12 19.32
1 16.22 RMT 16.22
Store 1 5.32 2.26 15.16
Corriodor 1 234.58 RMT 234.58
Projector room 1 17.01 RMT 17.01
1 5.33 3.03 16.71
Plumbing Shaft 1 9.19 RMT 9.19
674.68 SQM
A Basement Floor(Slit)
Fire Lobby 1 1.57 3 4.71
Meter Room 1 3.05 4.76 14.52
Electrical Room 1 2.38 4.76 11.33
Mid landing 1 1.50 3 4.50
Page 257
SN Perticular Nos L B H Qty Unit
Maintenace Office 1 3.59 3.54 12.71
Survellance room 1 5.55 2.26 12.54
Open to sky 1 7.50 16.265 121.99
Mid landing 2 1 2.15 4.55 9.78
Entrance 1 276.59 SQM 276.59
Driveway 1 993.00 SQM 993.00
1461.67 SQM
B Ground Floor
VIP Lobby 1 2.55 3 7.64
Mid landing 2 1.50 3 9.00
Art Gallry 1 22.60 11.535 260.67
Classroom 1 12.68 9.775 123.97
Store/locker 1 5.32 2.26 12.02
Multipurpose Hall 1 413.41 SQM 413.41
Lobby+Passage+Corridor 1 456.29 SQM 456.29
1283.00 SQM
B First Floor
VIP Lobby 1 2.55 3 7.64
Green room 1 4.30 4.88 20.98
Guest room 1 3.86 5.115 19.75
Auditorium 1 23.24 19.7 457.83
2 7.24 3.55 51.40
Store/locker 1 5.32 2.26 12.02
Store room 1 48.76 SQM 48.76
Green room 1 1 22.15 SQM 22.15
Lobby+Passage+Corridor 1 635.15 SQM 635.15
1275.69 SQM
B Second Floor
Store/locker 1 5.32 2.26 12.02
Open Terrace 1 5.44 24.66 134.15
room 1 1 3.86 4.81 18.57
Lobby 1 11.50 SQM 11.50
room 2+3+4 1 26.72 SQM 26.72
Corridor 1 365.34 SQM 365.34
AHU 1 6.45 4.81 31.02
AHU 1 4.13 2.93 12.09
Dormatory 1 5.54 4.76 26.37
Auditorium 1 27.24 19.55 532.54
2 7.01 3.55 49.74
1220.07 SQM
C Terrace Floor
1 11.50 SQM 11.50
1 5.33 3 15.98
1 5.55 26.72 148.30
175.77 SQM
28 Kota Skirting
Basement Floor(Parking)
0.00 SQM
Page 258
SN Perticular Nos L B H Qty Unit
Basement Floor(Slit)
Fire Lobby 1 1.57 3 0.1 0.91
Meter Room 1 3.05 4.76 0.1 1.56
Electrical Room 1 2.38 4.76 0.1 1.43
Mid landing 1 1.50 3 0.1 0.90
Maintenace Office 1 3.59 3.54 0.1 1.43
Survellance room 1 5.55 2.26 0.1 1.56
Open to sky 1 7.50 16.265 0.1 4.75
Mid landing 2 1 2.15 4.55 0.1 1.34
Entrance 1 85.44 RMT 0.1 8.54
Passage 1 20.75 RMT 0.1 2.08
Driveway 1 138.12 RMT 0.1 13.81
38.32 SQM
Ground Floor
VIP Lobby 1 2.55 3 0.1 1.11
Mid landing 2 1.50 3 0.1 1.80
Art Gallry 1 22.60 11.535 0.1 6.83
Classroom 1 12.68 9.775 0.1 4.49
Store/locker 1 5.32 2.26 0.1 1.52
Multipurpose Hall 1 85.85 RMT 0.1 8.58
Lobby+Passage+Corridor 1 208.28 RMT 0.1 20.83
45.16 SQM
First Floor
VIP Lobby 1 2.55 3 0.1 1.11
Green room 1 4.30 4.88 0.1 1.84
Guest room 1 3.86 5.115 0.1 1.80
Auditorium 1 30.25 19.55 0.1 9.96
Store/locker 1 5.32 2.26 0.1 1.52
Store room 1 31.85 RMT 0.1 3.19
Green room 1 1 19.74 RMT 0.1 1.97
Lobby+Passage+Corridor 1 258.92 RMT 0.1 25.89
47.27 SQM
Second Floor
Store/locker 1 5.32 2.26 0.1 1.52
Open Terrace 1 5.44 24.66 0.1 6.02
room 1 1 3.86 4.81 0.1 1.73
Lobby 1 16.43 RMT 0.1 1.64
room 2+3+4 1 22.08 RMT 0.1 2.21
Corridor 1 223.57 RMT 0.1 22.36
AHU 1 6.45 4.81 0.1 2.25
AHU 1 4.13 2.93 0.1 1.41
Auditorium 1 34.25 19.55 0.1 10.76
49.90 SQM
Terrace Floor
1 11.50 SQM 0.1 1.15
1 5.33 3 0.1 1.67
1 5.55 26.72 0.1 6.45
9.27 SQM
Page 259
SN Perticular Nos L B H Qty Unit
29 Wooden Flooring
Basement Floor 0.00 SQM
First Floor
Stage 1 7.00 12.45 87.15 SQM
Second Floor
Stage 1 7.00 12.45 87.15 SQM
First Floor
0.5mc/c 25 7.00 0.1 0.2 3.49
14 12.45 0.1 0.2 3.49
6.97 CUM
Page 260
SN Perticular Nos L B H Qty Unit
Terrace Floor
Column Cladding 67 0.60 0.6 2.1 337.68
Staircase Dado 2 4.12 2.1 17.30
354.98 SQM
32 Antiskid Ceramic Tiles Floor
Basement(Parking)
0.00 SQM
Basement(Slit)
WC for specially Abled 1 1.72 2.66 4.58
wc 3 1.17 1.4 4.91
Toilet (F) 1 3.71 1.3 4.82
Wc 1 1.10 1.82 2.00
Toilet (M) 1 1.47 1.82 2.67
Passage 1 20.75 RMT 20.75
39.73 SQM
Ground Floor
Toilet(F) 1 4.05 4.765 19.28
WC 3 1.50 1.13 5.08
1 1.50 1.07 1.61
Toilet(M) 1 20.64 RMT 20.64
WC 2 1.80 1.2 4.32
50.93 SQM
First Floor
toilet 2 2.30 2.32 10.67
toilet 1 1.35 3.11 4.20
Toilet(F) 1 4.05 4.765 19.28
WC 3 1.50 1.13 5.08
1 1.50 1.07 1.61
Toilet(M) 1 20.64 RMT 20.64
WC 2 1.80 1.2 4.32
65.80 SQM
Second Floor
Toilet(M) 1 20.64 RMT 20.64
WC 3 2.10 1.2 7.56
toilet 3 1.35 2.1 8.51
toilet 1 1.35 2.81 3.79
40.50 SQM
Page 261
SN Perticular Nos L B H Qty Unit
Passage 1 20.75 RMT 2.2 45.65
148.20 SQM
D2 3 0.90 1.8 4.86
D3 4 0.80 1.8 5.76
10.62
137.58 SQM
Ground Floor
Toilet(F) 1 4.05 4.765 2.2 38.77
WC 3 1.50 1.13 2.2 34.72
1 1.50 1.07 2.2 11.31
Toilet(M) 1 20.64 RMT 2.2 45.41
WC 2 1.80 1.2 2.2 26.40
156.60 SQM
D2 2 0.90 1.8 3.24
D3 6 0.80 1.8 8.64
11.88
144.72 SQM
First Floor
toilet 2 2.30 2.32 2.2 40.66
toilet 1 1.35 3.11 2.2 19.62
Toilet(F) 1 4.05 4.765 2.2 38.77
WC 3 1.50 1.13 2.2 34.72
1 1.50 1.07 2.2 11.31
Toilet(M) 1 20.64 RMT 2.2 45.41
WC 2 1.80 1.2 2.2 26.40
216.88 SQM
D2 2 0.90 1.8 3.24
D3 6 0.80 1.8 8.64
11.88
205.00 SQM
Second Floor
Toilet(M) 1 20.64 RMT 2.2 45.41
WC 3 2.10 1.2 2.2 43.56
toilet 3 1.35 2.1 2.2 45.54
toilet 1 1.35 2.81 2.2 18.30
152.81 SQM
D2 2 0.90 1.8 3.24
D3 6 0.80 1.8 8.64
11.88
140.93 SQM
Page 262
SN Perticular Nos L B H Qty Unit
Tread 18 1.50 0.25 6.75
Rise 19 1.50 0.166 4.73
33.36 SQM
Ground Floor
Staircase 1
Tread 22 2.10 0.3 13.86
Rise 23 2.10 0.166 8.02
Staircase 2
Tread 18 1.50 0.25 6.75
Rise 19 1.50 0.166 4.73
33.36 SQM
First Floor
Staircase 1
Tread 22 2.10 0.3 13.86
Rise 23 2.10 0.166 8.02
Staircase 2
Tread 18 1.50 0.25 6.75
Rise 19 1.50 0.166 4.73
33.36 SQM
Second Floor
Staircase 1
Tread 22 2.10 0.3 13.86
Rise 23 2.10 0.166 8.02
Staircase 2
Tread 18 1.50 0.25 6.75
Rise 19 1.50 0.166 4.73
33.36 SQM
Terrace Floor
Staircase 2
Tread 18 1.50 0.25 6.75
Rise 19 1.50 0.166 4.73
11.48 SQM
35 Granite for Sill and Jamb
Basement Floor(Parking)
0.00 CUM
Basement Floor(Slit)
W 3 1.50 1.5 0.23 4.14
W1 1 1.20 1.2 0.23 1.10
W2 1 0.90 1.5 0.23 1.10
W3 1 2.00 1.5 0.23 1.61
V 5 0.60 0.6 0.23 2.76
10.72 CUM
Ground Floor
W 1 3.50 2 0.23 2.53
W1 17 3.00 2 0.23 39.10
W2 1 2.00 1.5 0.23 1.61
W3 2 1.20 1.2 0.23 2.21
V 2 0.60 0.6 0.23 1.10
46.55 CUM
First Floor
Page 263
SN Perticular Nos L B H Qty Unit
W 10 3.00 2 0.23 23.00
W1 1 2.00 1.5 0.23 1.61
W2 1 1.20 1.2 0.23 1.10
W3 4 1.50 1.5 0.23 5.52
V 5 0.60 0.6 0.23 2.76
33.99 CUM
Second Floor
W 7 3.00 2 0.23 16.10
W1 6 2.00 1.5 0.23 9.66
W2 1 1.50 1.5 0.23 1.38
W3 1 1.20 1.2 0.23 1.10
W4 1 2.40 2 0.23 2.02
V 1 0.60 0.6 0.23 0.55
30.82 CUM
Page 264
SN Perticular Nos L B H Qty Unit
43 Putty
Basement(Parking) 2538.92 SQM
Ground Floor 2924.32 SQM
First Floor 3438.21 SQM
Second Floor 2422.76 SQM
Terrace Floor 3513.77 SQM
Above Terrace Floor 630.05 SQM
45 External Painting
Basement(Parking) 0.00 SQM
Ground Floor 555.11 SQM
First Floor 651.65 SQM
Second Floor 651.65 SQM
Terrace Floor 200.27 SQM
First Floor
D 2 2.00 2.1 8.40
8.40 CUM
Second Floor
D 2 1.50 2.1 6.30
6.30 CUM
Page 265
SN Perticular Nos L B H Qty Unit
Terrace Floor
D 1 1.50 2.1 3.15
3.15 CUM
First Floor
D1 4 1.50 2.1 12.60
12.60 CUM
Second Floor
D1 10 1.20 2.1 25.20
25.20 CUM
Terrace Floor
D1 1 1.20 2.1 2.52
2.52 CUM
First Floor
D2 9 1.20 2.1 22.68
22.68 CUM
Second Floor
D2 1 0.90 2.1 1.89
1.89 CUM
Terrace Floor
D2 2 0.90 2.1 3.78
3.78 CUM
Page 266
SN Perticular Nos L B H Qty Unit
First Floor
D3 9 0.80 1.8 12.96
12.96 CUM
Second Floor
D3 6 0.80 1.8 8.64
8.64 CUM
50 Window
Basement(Parking)
0.00 SQM
Basement(Slit)
W 3 1.50 1.5 6.75
W1 1 1.20 1.2 1.44
W2 1 0.90 1.2 1.08
W3 1 2.00 1.5 3.00
12.27 SQM
Ground Floor
W 1 3.50 2 7.00
W1 17 3.00 2 102.00
W2 1 2.00 1.5 3.00
W3 2 1.20 1.2 2.88
114.88 SQM
First Floor
W 10 3.00 2 60.00
W1 1 2.00 1.5 3.00
W2 1 1.20 1.2 1.44
W3 4 1.50 1.5 9.00
73.44 SQM
Second Floor
W 7 3.00 2 42.00
Page 267
SN Perticular Nos L B H Qty Unit
W1 6 2.00 1.5 18.00
W2 1 1.50 1.5 2.25
W3 1 1.20 1.2 1.44
W4 1 2.40 2 4.80
68.49 SQM
Terrace Floor
0.00 SQM
51 Ventilators
Basement(Parking)
0.00 SQM
Basement(Slit)
V 5 0.60 0.6 1.80
1.80 SQM
Ground Floor
V 2 0.60 0.6 0.72
0.72 SQM
First Floor
V 5 0.60 0.6 1.80
1.80 SQM
Second Floor
V 1 0.60 0.6 0.36
0.36 SQM
Terrace Floor
0.00 SQM
52 Mild Steel Grill
Basement(Parking)
0.00 SQM
Basement(Slit)
V 5 0.60 0.6 1.80
1.80 SQM
Ground Floor
W 1 3.50 2 7.00
W1 17 3.00 2 102.00
W2 1 2.00 1.5 3.00
W3 2 1.20 1.2 2.88
V 2 0.60 0.6 0.72
115.60 SQM
First Floor
W 10 3.00 2 60.00
W1 1 2.00 1.5 3.00
W2 1 1.20 1.2 1.44
W3 4 1.50 1.5 9.00
V 5 0.60 0.6 1.80
75.24 SQM
Second Floor
W 7 3.00 2 42.00
W1 6 2.00 1.5 18.00
Page 268
SN Perticular Nos L B H Qty Unit
W2 1 1.50 1.5 2.25
W3 1 1.20 1.2 1.44
W4 1 2.40 2 4.80
V 1 0.60 0.6 0.36
68.85 SQM
53 Steel
1 Foundation 177.28 120 Kg/Cum 21273.84
2 Column 553.28 225 Kg/Cum 124488.90
3 Beam 1417.22 170 Kg/Cum 240927.95
4 Slab 1190.62 125 Kg/Cum 148827.76
5 Lintel 23.06 100 Kg/Cum 2305.52
6 Chajja 10.45 100 Kg/Cum 1045.20
7 Wall 235.47 150 Kg/Cum 35320.31
9 Staircase 190.97 105 Kg/Cum 20052.03
594241.51
594.242 MT
Terrace Floor
D 1 0.06 0.1 5.7 0.07
D1 1 0.06 0.1 5.4 0.06
D2 1 0.06 0.1 5.1 0.06
0.19 CUM
55 RCC Frame
Basement Floor(Parking)
0.00 RMT
Basement Floor(Slit)
D3 5 0.80 1.8 7.20
7.20 RMT
Page 269
SN Perticular Nos L B H Qty Unit
Ground Floor
D3 6 0.80 1.8 8.64
8.64 RMT
First Floor
D3 9 0.80 1.8 12.96
12.96 RMT
Second Floor
D3 6 0.80 1.8 8.64
8.64 RMT
57 Water proofing to WC
Basement(Parking)
0.00 SQM
Basement(Slit)
WC for specially Abled 1 1.72 2.66 4.58
wc 3 1.17 1.4 4.91
Wc 1 1.10 1.82 2.00
11.49 SQM
Ground Floor
WC 3 1.50 1.13 5.08
1 1.50 1.07 1.61
WC 2 1.80 1.2 4.32
11.01 SQM
First Floor
toilet 2 2.30 2.32 10.67
Page 270
SN Perticular Nos L B H Qty Unit
toilet 1 1.35 3.11 4.20
WC 3 1.50 1.13 5.08
1 1.50 1.07 1.61
WC 2 1.80 1.2 4.32
25.88 SQM
Second Floor
WC 3 2.10 1.2 7.56
toilet 3 1.35 2.1 8.51
toilet 1 1.35 2.81 3.79
19.86 SQM
A Basement Floor(Slit)
Fire Lobby 1 1.57 3 4.71
Meter Room 1 3.05 4.76 14.52
Electrical Room 1 2.38 4.76 11.33
Mid landing 1 1.50 3 4.50
Maintenace Office 1 3.59 3.54 12.71
Survellance room 1 5.55 2.26 12.54
Open to sky 1 7.50 16.265 121.99
Page 271
SN Perticular Nos L B H Qty Unit
Mid landing 2 1 2.15 4.55 9.78
Entrance 1 276.59 SQM 276.59
Driveway 1 993.00 SQM 993.00
1461.67 SQM
B Ground Floor
VIP Lobby 1 2.55 3 7.64
Mid landing 2 1.50 3 9.00
Art Gallry 1 22.60 11.535 260.67
Classroom 1 12.68 9.775 123.97
Store/locker 1 5.32 2.26 12.02
Multipurpose Hall 1 413.41 SQM 413.41
Lobby+Passage+Corridor 1 456.29 SQM 456.29
1283.00 SQM
B First Floor
VIP Lobby 1 2.55 3 7.64
Green room 1 4.30 4.88 20.98
Guest room 1 3.86 5.115 19.75
Auditorium 1 30.25 19.55 591.39
Store/locker 1 5.32 2.26 12.02
Store room 1 48.76 SQM 48.76
Green room 1 1 22.15 SQM 22.15
Lobby+Passage+Corridor 1 635.15 SQM 635.15
1357.84 SQM
B Second Floor
Store/locker 1 5.32 2.26 12.02
Open Terrace 1 5.44 24.66 134.15
room 1 1 3.86 4.81 18.57
Lobby 1 11.50 SQM 11.50
room 2+3+4 1 26.72 SQM 26.72
Corridor 1 365.34 SQM 365.34
AHU 1 6.45 4.81 31.02
AHU 1 4.13 2.93 12.09
Dormatory 1 5.54 4.76 26.37
Auditorium 1 34.25 19.55 669.59
1307.37 SQM
60 Anti Termit Treatment to Excavated Pit
Base of Pit
F1 67 2.30 2.3 354.43 SQM
Page 272
SN Perticular Nos L B H Qty Unit
B Basement Floor(Slit)
Lobby 1 2.55 2.99 1.2 13.29
1 5.33 3 1.2 19.98
Electric room 1 2.38 4.76 1.2 17.14
Meter room 1 3.05 4.76 1.2 18.74
WC 1 1.72 2.66 1.2 10.51
WC 3 1.17 1.4 1.2 18.50
Toilet (F) 1 1.30 3.711 1.2 12.03
1 1.10 1.82 1.2 7.01
Toilet (M) 1 1.47 1.828 1.2 7.91
Passage 1 1.82 6.985 1.2 21.13
1 0.90 1.95 1.2 6.84
Maintance Room 1 3.59 3.54 1.2 17.11
Survieelance 1 5.55 5.26 1.2 25.94
1 101.00 RMT 1.2 121.20
1 18.92 RMT 1.2 22.70
1 29.10 RMT 1.2 34.92
1 30.03 RMT 1.2 36.04
3 4.55 RMT 1.2 16.38
1 5.31 RMT 1.2 6.37
1 2.78 RMT 1.2 3.33
2 1.32 RMT 1.2 3.16
1 5.33 RMT 1.2 6.39
1 5.11 RMT 1.2 6.13
Plumbing Shaft 1 9.19 RMT 1.2 11.03
Open to Sky Courtyard 1 47.46 RMT 1.2 56.95
520.73 SQM
B Ground Floor
Multipurpose hall 1 16.45 24.77 1.2 98.92
Art gallray 1 22.60 11.535 1.2 81.92
Classroom 1 12.68 9.775 1.2 53.90
Toilet (F) 1 3.93 4.765 1.2 20.87
wc 4 1.50 1.07 1.2 24.67
Toilet (M) 1 20.64 RMT 1.2 24.77
1 197.15 RMT 1.2 236.58
WC 2 1.80 1.2 1.2 14.40
Store 1 5.32 2.26 1.2 18.19
1 14.76 RMT 1.2 17.71
Plumbing Shaft 1 9.19 RMT 1.2 11.03
602.96 SQM
B First Floor
Store room 1 31.85 RMT 1.2 38.22
Green room-1 1 4.30 4.88 1.2 22.03
1 1.77 4.77 1.2 15.70
Toilet 2 2.55 2.327 1.2 23.41
Lobby 1 2.55 2.89 1.2 13.05
Passage 1 58.83 RMT 1.2 70.60
Corriodor 1 202.22 RMT 1.2 242.66
Green room-1 1 5.33 4.546 1.2 23.69
Page 273
SN Perticular Nos L B H Qty Unit
Toilet 1 1.35 3.11 1.2 10.70
Guest Room 1 3.86 5.115 1.2 21.54
Toilet(F) 1 3.93 4.765 1.2 20.87
WC 4 1.50 1.13 1.2 25.25
WC 2 1.80 1.2 1.2 14.40
Toilet(M) 1 20.73 RMT 1.2 24.88
Auditorium 1 30.25 19.7 1.2 119.88
1 14.76 RMT 1.2 17.71
1 5.33 3 1.2 19.98
Plumbing Shaft 1 9.19 RMT 1.2 11.03
735.60 SQM
B Second Floor
1 63.63 RMT 1.2 76.36
VIP lobby 1 2.55 2.89 1.2 13.05
Toilet 1 1.35 2.81 1.2 9.98
Room 1 1 3.86 4.81 1.2 20.81
Toilet 3 1.35 2.1 1.2 24.84
Room 2,3,4 3 20.27 RMT 1.2 72.97
AHU 1 6.45 4.81 1.2 27.02
AHU 1 4.12 2.93 1.2 16.92
Auditorium 1 34.25 19.55 1.2 129.12
Dormatory 1 5.54 4.76 1.2 24.72
WC 3 2.10 1.12 1.2 23.18
1 16.22 RMT 1.2 19.46
Store 1 5.32 2.26 1.2 18.19
Corriodor 1 234.58 RMT 1.2 281.50
Projector room 1 17.01 RMT 1.2 20.41
1 5.33 3.03 1.2 20.05
Plumbing Shaft 1 9.19 RMT 1.2 11.03
809.62 SQM
65 Truss
Basement Floor
0.00
Ground Floor
0.00
First Floor
0.00
Page 274
Measurement Sheet - Landscaping
CSR ITEM
SN NO/CODE DISCRIPTION AND DETAIL OF WORK LENGTH BREADTH HEIGHT QUANTITY UNIT
NO
Murals/Artifacts/Landscaping
1 Preparing Lawn (30cms. Depth) : Excavation the ground
to a required depth of 30cms. removing & conveying
unwanted stuff to a distance as directed. Providing
and filling fresh garden soil/silt & manure in
excavated area in 3:1 proportion to a height of
30cms. Mixing garden soil & manure thoroughly well,
leveling, watering on previous night. Planting required
variety of lawn grass as directed & maintaining till
well established by watering, weeding, clipping,
rolling etc complete. (C.S.R.I .No 1,
Page No.4, Parks & garden 2014-15)
1 75 1 75
1 75 1 75
1 50 1 50
200 SQM
2 Planting Clipped Hedge :- Excavating the ground to a
required depth of 30cms. removing and conveying
unwanted stuff to a required distance as directed.
Providing and filling fresh garden soil and manure in
excavated area in 3:1 proportion to a height of
30cms. Mixing garden soil and manure thoroughly
well, levelling, watering on previous night. Planting
cutting of required species in two rows. Distance
between two rows and between two cutting will be
25cms. Maintaining till well established by watering,
weeding, stirring the soil and clipping if necessary etc.
complete.
(C.S.R.I. No .5, Page No.5, Parks & Garden 2014-15)
1 75 1 75 SQM
1 75 1 75 SQM
1 50 1 50 SQM
200 SQM
3 Preparing flower bed (with plant) :- Excavating the
ground to a required depth of 30cms. removing and
conveying unwanted stuff to a required distance as
directed. Providing and filling fresh garden soil and
manure in excavated area in 3:1 proportion to a
required height of 30cms. Mixing garden soil and
manure thoroughly well, levelling, watering on
previous night. Planting seedlings of required annuals
25cms. apart maintaining till well established by
watering, weeding, stirring replacing of casualties
etc. complete. (C.S.R.I. No .6, Page No.5, Parks &
Garden 2014-15)
1 75 1 75 SQM
1 75 1 75 SQM
1 50 1 50 SQM
200 SQM
5 Mogra Plant/Creepers/Climbers :- : Excavating pit
with size 0.3 x 0.3 x 0.3m. removing & conveying
unwanted stuff to a required distance as directed.
Providing and filling the pit with approved excavated
material up to a height of 0.15mtr.& remaining height
of 0.15. with fresh garden soil & manure in 3:1
proportion. Mixing soil and manure thoroughly well,
leveling watering on previous night. Planting one or
two year old healthy plant as per specification.
Maintaining till well established by watering,weeding,
stirring pruning, replacing the casualties etc complete.
(C.S.R.I. No 10, Page No 6,Parks & Garden 2014-15)
ABSTRACT - LANDSCAPING
1 GRC00100 Preparing Lawn (30cms. Depth) : Excavation the
ground to a required depth of 30cms. removing &
conveying unwanted stuff to a distance as directed.
Providing and filling fresh garden soil/silt & manure
in excavated area in 3:1 proportion to a height of
30cms. Mixing garden soil & manure thoroughly
well, leveling, watering on previous night. Planting
required variety of lawn grass as directed &
maintaining till well established by watering, 200 Sqm 600 120000.00
weeding, clipping, rolling etc complete.
(C.S.R.I .No 1, Page No.4, Parks & garden 2014-
15)
Page 279
CSR ITEM
SN DISCRIPTION AND DETAIL OF WORK QUANTITY UNIT RATE AMOUNT
NO/CODE NO
Page 280
CSR ITEM
SN DISCRIPTION AND DETAIL OF WORK QUANTITY UNIT RATE AMOUNT
NO/CODE NO
Page 281
LEAD STATMENT AT NAGPUR
9 Tiles all types & shahabad Nagpur 5 329.98 5 329.98 0 0.00 20 % below
Item No. Item No. SSR Item NOS. Item of work Quantity Per Unit
Material
723717.07
QUALITY CONTROL TEST CHARGES
Rate of Each
Item no Item in Brief Estimated Qty Material Test Norms Required Test
Test
Quantity Unit
Standard Consistancy,
Fineness, Specific
Gravity, Setting Time
3 Testing of Cement used in concrete 184.99 M.T cement 5 5 3770
( Initial & Final ),
Compressive Strength,
Soundness
Water Absorption,
5 Test of Brick used in Brick Masonry 133471.47 Nos Brick 5 5 2175
Compressive Strength
Cement
6 Testing of Cement Mortar - - 2 Compressive Strength 2 690
Mortar
Marble/ Water Absorption,
7 Testing of Marble/ Kota - - 2 2 2495
kota Specific Gravity
20715.00
2760.00
18850.00
4140.00
10875.00
1380.00
4990.00
40000.00
103710.00