Professional Documents
Culture Documents
Spartek Systems Inc 1 28 10 2022 - 22 14 23
Spartek Systems Inc 1 28 10 2022 - 22 14 23
Spartek Systems Inc 1 28 10 2022 - 22 14 23
No part of this manual may be reproduced in any form or by any means (including electronic storage and retrieval or translation into a foreign language) without prior
agreement and written consent from Spartek Systems Inc. as governed by international copyright laws.
Disc laimer
The material contained in this document is provided “as is” and is subject to being changed without notice in future editions. The material in this manual should be
considered a guideline, but is no substitute for proper training and supervision by qualified personnel.
The information and guidelines contained herein have been compiled from sources believed to be reliable, representing industry best practices. There is no warranty,
guarantee, or representation, either expressed or implied by Spartek Systems Inc. to the correctness or sufficiency of any representation contained in this manual.
While Spartek Systems Inc. endeavors to ensure these guidelines are accurate at the time of their preparation, it takes no responsibility for matters arising from
changed circumstances or information or material that may have become available after the issued or reviewed date.
Spartek Systems Inc. shall not be liable for errors or for incidental or consequential damages in connection with the furnishing, use, or performance of this document
or any information contained herein.
Technology Licenses
The hardware and/or software described in this document are furnished under a license and may be used or copied only in accordance with the terms of such license.
2
Table of Contents
Introduction............................................................................................... 5 Telemetry Tool Power Adapter.............................................. 38
Thread Protector (GO) ........................................................... 39
Spartek Systems................................................................................. 6
Thread Protectors (Spartek PLT) ............................................ 39
About Us ............................................................................... 6
1.375” Production Logging Tools .............................................................. 41
Customer Service Guidance ................................................... 6
Contact Us ............................................................................. 6 SS8109 SRO / Telemetry .................................................................... 42
SS8120 Memory Controller................................................................ 43
Surface Equipment ..................................................................................... 7
SS8335 Compact Memory PLT ........................................................... 44
SS6702 SRO Panel .............................................................................. 8 SS8195 Digital Battery Activation Module ......................................... 45
SS6720 SRO Panel and Plotter Systems ............................................. 9 SS8702 Pressure Bulkhead ................................................................. 46
SS6800 Line Management System (LMS) ........................................... 10 SS8735 Knuckle Joint ......................................................................... 47
Printrex Thermal Line Printers ........................................................... 11 SS8209 Gamma Ray / Casing Collar Locator ...................................... 48
SDS Warrior Logging Panel and Software .......................................... 12 SS8219 Casing Collar Locator ............................................................. 49
SS6905 Memory Controller Interface Module ................................... 13 SS8220 Gamma Ray ........................................................................... 50
Accessories ........................................................................................ 14 SS8329 Sapphire Pressure / Temperature ......................................... 51
Cables – BNC to BNC ............................................................. 14 SS8362 Quartz Pressure / Temperature ............................................ 52
Cables – Tool Cables .............................................................. 14 SS8502 Acoustic Density .................................................................... 53
Cables – Power / Adapter ...................................................... 14 SS8560 Capacitance ........................................................................... 54
Cables – USB A/B................................................................... 14 SS8508 RA Fluid Density Tool ............................................................ 55
Depth Encoder ....................................................................... 15 SS8715 E-Line Centralizer (Roller) ..................................................... 56
Depth Splitter Box ................................................................. 15 SS8715 E-Line Centralizer (Bow Spring) ............................................ 57
Depth Encoder Cables ........................................................... 16 SS8719 In-Line Centralizer (Roller) .................................................... 58
Depth Simulator .................................................................... 16 SS8719 In-Line Centralizer (Bow Spring) ........................................... 59
Documents ............................................................................ 17 SS8750 X-Y Caliper (Roller) ............................................................... 60
Logging Software .................................................................. 17 SS8750 X-Y Caliper (Bow Spring) ....................................................... 61
Lubricants.............................................................................. 18 SS8442 In-Line Flow Meter (1.688”) ................................................. 62
Shipping Cases ...................................................................... 18 SS8442 In-Line Flow Meter (2.125”) ................................................. 63
Shipping Case – SS6702 Surface Panel .................................. 19 SS8431 Continuous Flow Meter (1.688”) ........................................... 64
SS1008 200C Battery Depassivation Box ............................... 19 SS8431 Continuous Flow Meter (2.125”) ........................................... 65
Tool Stands............................................................................ 19 SS8431 Continuous Flow Meter (2.875”) ........................................... 66
Tool Vise-Clamp (Alumninum) ............................................... 19 SS8430 Continuous Flow Meter (1.688”) .......................................... 67
Warrior Line Card Interface ................................................... 20 SS8430 Continuous Flow Meter (2.125”) .......................................... 68
Wireline Simulator ................................................................ 20 SS8430 Continuous Flow Meter (2.875”) .......................................... 69
SS6914 SA HTHP Breakout Box .............................................. 20 SS8409 Folding Flow Meter (Roller 4.60”) ........................................ 70
SS6916 PLT Tool Breakout Box .............................................. 21 SS8409 Folding Flow Meter (Roller 6.50”) ........................................ 71
SS6917 PLT Memory Tool Volt / Amp Monitor Box ............... 21 SS8409 Folding Flow Meter (Roller 8.20”) ........................................ 72
SS6918 PLT Sonde Tool Volt / Amp Monitor Box ................... 22 SS8409 Folding Flow Meter (Bow Spring 4.60”) ................................ 73
SS8409 Folding Flow Meter (Bow Spring 6.20”) ................................ 74
Standalone Analog Tools .......................................................................... 23 SS8409 Folding Flow Meter (Bow Spring 8.20”) ................................ 75
SS8245 Analog GR/CCL ...................................................................... 24 SS8490 Spectral Noise Tool................................................................ 76
SS8246 Analog HTHP GR/CCL............................................................. 25 Accessories ........................................................................................ 77
SS8715 E-Line Centralizer (Roller) ..................................................... 26 Battery Pack Housings (Standard) ......................................... 77
SS8715 E-Line Centralizer (Bow Spring) ............................................ 27 Battery Packs ........................................................................ 77
SS8716 PL E-Line Centralizer .............................................................. 28 Bullnose................................................................................. 78
1.0” Production Logging Tools .................................................................. 29 Crossovers (Spartek).............................................................. 78
Crossovers (Standard) ........................................................... 78
SS8105 SRO / Telemetry .................................................................... 30
Elastomer Redress Kits .......................................................... 79
SS8205 Gamma Ray / Casing Collar Locator ...................................... 31
Miscellaneous Tools .............................................................. 79
SS8305 Temperature ......................................................................... 32
Shipping Cases ...................................................................... 79
SS8315 Pressure ................................................................................ 33
Telemetry Tool Power Adapter.............................................. 80
SS8565 Capacitance ........................................................................... 34
Thread Protectors (GO) ......................................................... 80
SS8405 Folding Flow Meter ............................................................... 35
Thread Protectors (Spartek PLT) ............................................ 80
SS8405 Continuous Flow Meter ......................................................... 36
Accessories ........................................................................................ 37 1.688” Production Logging Tools .............................................................. 81
Bullnose................................................................................. 119
Crossover............................................................................... 119
Elastomer Redress Kits .......................................................... 120
High Temperature Grease ..................................................... 120
Miscellaneous Tools .............................................................. 121
Shipping Cases ...................................................................... 121
Thread Protectors (GO) ......................................................... 121
Thread Protectors (Spartek HTHP Tools) ............................... 122
Introduction
5
Introduction
Spartek Systems
Spartek Systems
Spartek Systems strives to aggressively research and develop state of the art technologies to enhance our customers’ ability to evaluate, monitor and exploit oil and
gas assets. To ensure customer satisfaction by providing outstanding technical support and high-quality products at competitive prices.
About Us
Founded in Sylvan Lake, Alberta, Canada, Spartek Systems has over 100
employees worldwide. Our goal is to provide the industry with cost effective
solutions to solving reservoir problems. The Spartek team is dedicated to
providing their best efforts to ensure a safe working environment, delivering
high quality products with a goal of zero defects, and providing outstanding
customer technical support.
Sylvan Lake is our center for Research and Development, and Manufacturing.
Our key staff has over 120 years of industry experience in developing and
deploying subsurface and surface equipment. We employ the latest
technologies in the design and development of our products. Our
development process begins with understanding our customer's
requirements and continues with outstanding technical support throughout
the life of the product
Presently Spartek Systems offers a wide range of memory and surface Head Office – Sylvan Lake, Alberta, Canada
readout pressure & temperature recorders, a complete suite of production
logging instrumentation, casing inspection technology, multi-cycle shut in
tool, permanent monitoring systems, perforating memory triggers and a full
range of surface and subsurface accessories to meet your measurement
needs.
Surface Equipment
The CE certified SRO PL Panel is the available option for the Specifications
Surface Acquisition section of the Production Logging Tool. Width 19.0"
Depth 15.0"
• Displays Depth and Line-speed on easy to see blue VFD
Height 3.25" (~ 2U)
• Light-weight, 19" x 24" rack mount portable chassis
Weight 12.52 lbs
• Interfaces the Spartek Telemetry tool with a PC
Mounting 19" Rack Mount
• USB 1.0/2.0 communication interface (2m USB A/B cable 110 / 220 V AC
included) Operating Voltage
60 / 50 Hz
• Operates with conventional or sour-service wirelines Operating Current 2A
• Up to 25Kft (7,600m) long
• Can acquire up to two 4-20mA analog surface channels
• CE certification
Accessories
Item Description Item Number
BNC-BNC Patch Cable - 50°C - 1 m (3 ft) 10000297
Printrex Thermal Line Printer Accessory - Rack Mount Version - Rail Kit 10018899
The SRO PL Panel & Plotter is the available option for the Specifications
Surface Acquisition section of the Production Logging Tool. Width 24.5"
Depth 20.5"
• Portable, rugged and moisture resistant enclosure
Height 9.7"
suitable for shipping
Weight 60 lbs
• End covers are easily removed for quick set up and
110 / 220 V AC
operation Operating Voltage
60 / 50 Hz
• Industry standard Printrex Thermal black/white or color
Operating Current 5A
Line Plotter
• Spartek SS6702 PL SRO Panel included
• Displays Depth and Line-speed on easy to see blue VFD
• USB 1.0/2.0 communication interface
• Interfaces the Spartek Telemetry tool with the PC
Accessories
Item Description Item Number
BNC-BNC Patch Cable - 50°C - 1 m (3 ft) 10000297
Accessories
Item Description Item Number
Cable - Depth Encoder - Non-Molded - 15 ft 10006534
The Printrex 823DL/G black/white and C9201 color thermal- Desktop (B/W only)
line plotters are available for used for printing fan-fold log Width 12.3"
prints. Both plotters are available in either a rack mount or Depth 12.0"
desktop version. Height 4.87"
Weight 21.0 lbs
• Rack mount version mounts in any standard 19"wide x
Rack Mount (B/W & Color)
3U rack system
• Rugged design Width 19.0"
• Compatible with the SparWorks software application Depth 16.12"
• Accepts fan-fold or continuous role thermal paper Height (3U) 5.25"
Weight 22.0 lbs
• Cables included
• Used throughout the logging industry
• USB 2.0 interface and network connectivity
• Universal AC input
• Paper output stacker/basket and extra paper also
available2
Accessories
Item Description Item Number
Printrex Thermal Line Printer Accesory - Desktop Version - Paper 10024733
Printrex Thermal Line Printer Accessory - Desktop Version - Paper Input 10020121
Printrex Thermal Line Printer Accessory - Rack Mount Version - Paper 10020122
Printrex Thermal Line Printer Accessory - Rack Mount Version - Rail Kit 10018899
Printrex Thermal Line Printer Consumable - Paper - Roll (6 Rolls x 150ft per Case) 10020123
PL - Logging Panel - Warrior (incl. data acquisition boards) - 220VAC Operation 10018355
Accessories
Item Description Item Number
Software - Warrior 8 - Companion Key (dongle) 10027782
Software - Warrior 8 - Full Access Cased Hole - With Real Time Acquisiton 10027781
Accessories
Item Description Item Number
PL - Test Cable - 11 Pin Battery Pack to Interface 12VDC Jack 10023412
Accessories
Accessories
PL - Test Cable - Nexus Plug to 4-Pin / 6-Socket KTK Cable - 10 ft - 177°C 10028062
Accessories
Depth Encoder
Item Description Item Number
Optical Depth Encoder - 6 pin 10014149
Accessories
Item Description Item Number
Depth System - Adapter - Veeder Root to K-Winch Encoder Crossover Assembly 10031505
Accessories
The Depth Encoder cables connect either the Line Management System (LMS) or SRO
PL Panel to the mechanical depth encode.
• Compatible with both the Spartek SRO panel and LMS box
• 15 ft long, molded, sealed connector
• Shielded throughout and grounded on one end only (black connector)
• Connector dust-covers included
• Custom lengths up to 75 ft available
Depth Simulator
Item Description Item Number
Depth Simulator Assembly 10008633
The Depth Simulator box connects to the depth port on the Line Management System
(LMS) or SRO PL Panel and provides a method for simulating logging up or down.
Typically used for testing depth cables, SRO panels, LMS boxes and training.
Accessories
Item Description Item Number
Cable - Depth Encoder - Non-Molded - 15 ft 10006534
Accessories
Documents
Item Description Item Number
Doc - OP - SS8000 Production Logging Operation Manual - Memory Mode 10026772
All documents are available in electronic form (PDF) or bound hard copy.
Maintenance Manuals
Maintenance manuals for the Production Logging Tool are available and listed on their
respective pages. They are categorized in three levels (ML1, ML2, and ML3).
• Level 1 - focuses on maintaining the integrity of field joints and the replacement of
normal wear items in dynamic mechanical assemblies. A field technician is required
to perform these procedures after each use.
• Level 2 - focuses on maintaining the integrity of internal seals, the inspection of
internal assemblies for damage, and the replacement of normal wear items in
dynamic mechanical assemblies. A field or laboratory technician is required to
perform these procedures, in conjunction with Level 1, after six months of use.
• Level 3 - focuses on the refurbishment and/or repair of all the module level parts
and assemblies. A laboratory technician is required to perform these procedures, in
conjunction with Levels 1 & 2, every twelve to twenty-four months depending on
the frequency of use and the type of well conditions the tool module has been
exposed to.
Logging Software
Item Description Item Number
Casing Evaluation & Analysis Module (Includes SparWorks) 10028758
SparWorks is the primary software application used for acquiring and processing data
from all Spartek Systems Production Logging Tool products. The USB security software
("dongle") provides licensing protection for the software on an installation by
installation basis.
• Full support for the SRO and Memory mode PLT systems
• Full support for the LMS
• Complete software solution for acquiring, processing and presenting of Spartek PLT
data
• Import and Export LAS and ASCII data files
• No annual license fees
• Software upgrades available at no extra cost
• Microsoft Windows 98SE/ME/NT/XP/VISTA/Window 7
• The USB port dongle is automatically -detected by SparWorks
Accessories
Lubricants
Item Description Item Number
Grease - Thread Lubricant - Fastorq 70+ (16 oz Brush Top) 10013669
Kopr-Kote – anti-seize compound for thread lubrication (brush applied) (225mL) 10005950
Shipping Cases
Item Description Dimensions (L x D x H) Slots Slot Length Slot Width Item Number
Accessories
Shipping Case for the SS6702 Surface Readout (SRO) Panel. Specifications
Width 24.4"
• Pelican brand, model 1600, PVC, water-resistant case
Depth 19.4"
• Rugged construction, latches and handle
Height 8.8"
• Lined with high-impact foam
Weight (Empty) 13.0 lbs
• Suitable for shipping on all commercial carriers
• CE certified
• Compatible with the Spartek SRO panel and LMS box
SS1008 SB - 180C / 200C - Battery Depassivation Box - 7 & 11 Pin Connector 10031902
Battery Depassivation box for 7-pin and 11-pin 200 C Lithium battery packs.
Tool Stands
Item Description Item Number
Tool Stand - 2.30" H - Aluminum 10024734
Accessories
The Warrior Line Interface card is manufactured by Scientific Data Systems (SDS) and allows the
Spartek Production Logging Tool to be run using the SDS logging panel instead of the Spartek
Systems SRO Panel. This interface card is pre-installed in most SDS/Warrior panels built in 2005 or
later. This interface card can be purchased from Spartek systems or directly from SDS.
• Compatible with the SDS SRO panel and the Warrior software application
• Installs inside the SDS SRO panel
• Provides a bi-directional communications interface between the SDS/Warrior SRO panel and the
Spartek Telemetry Logging tool string
Wireline Simulator
Item Description Item Number
Wireline Simulator Module – 15K ft - 3/16" line Type 10004640
Accessories
The PLT Breakout Test Box connects between Spartek 1.375" Specifications
PL Telemetry (or Memory) tool and any Spartek 1.375"D PLT Width 3.0"
Sonde thereby allowing the voltage and current drawn by the Length 11.0"
tools Sonde to be monitored. The PLT Breakout Test Box also Height 2.5"
allows for easy access to the power and RS485 bus Weight 0.87 lbs
communication lines for troubleshooting. Operating Temperature -25 – 55 C
Operating Voltage 5 – 20 V DC
• External replaceable fuse
Operating Current 1 - 999 mA
• Red and blue LED display of Volts and Amps
Voltage Resolution 0.1 V
• Rugged aluminum enclosure
Amperage Resolution 1 mA
• Access to probe tool-bus power and communication lines
• Compatible with all 1.375"D Spartek PLT Sondes
• Ideal for individual tool Sonde checkout and bench
testing
Accessories
Accessories
Accessories
Item Description Item Number
Kit - ML1 - PL GO Field Joint - 1.375D / 1.688D - Aflas 90D - Med Sour 10023088
Kit - ML1 - PL GO Field Joint - 1.375D / 1.688D - Chemraz 90D - Sour 10023087
Kit - ML1 - PL GO Field Joint - 1.375D / 1.688D - Viton 90D - Sweet 10027168
Accessories
Item Description Item Number
Case - Transport - 1.688D - 2 x 90.0" Slot 10029170
Kit - ML1 - PL GO Field Joint - 1.375D / 1.688D - Aflas 90D - Med Sour 10023088
Kit - ML1 - PL GO Field Joint - 1.375D / 1.688D - Chemraz 90D - Sour 10023087
Kit - ML1 - PL GO Field Joint - 1.375D / 1.688D - Viton 90D - Sweet 10027168
Accessories
Item Description Item Number
Kit - ML1 - PL GO Field Joint - 1.375D / 1.688D - Viton 90D - Sweet 10027168
Kit - ML1 - PL GO Field Joint - 1.375D / 1.688D - Aflas 90D - Med Sour 10023088
Kit - ML1 - PL GO Field Joint - 1.375D / 1.688D - Chemraz 90D - Sour 10023087
PL - SS8719 – Centralizer – Roller to Bow Spring (23 lbs max force) - Conversion Kit 10023111
PL - SS8719 – Centralizer – Roller to Bow Spring (38 lbs max force) - Conversion Kit 10021307
Redress Kit - PL - Misc Pins & Screw - E-line Centralizer - Roller Type 10023336
Kit - ML3 - SS8715 SA - E-Line Roller Centralizer - 1.375D - Chemraz - sour 10028148
1Maximum values include a 20% safety factor. Minimum values include a 50% safety factor (recommended).
www.sparteksystems.com 11 Aug 2022 Cased Hole Logging Catalog
26
Standalone Analog Tools
SS8715 SN - E-Line - Centralizer - Bow Spring (38 lb) - GO Subs - 177°C - 15000 psi - 1.375D - Sour 10023564
Accessories
Item Description Item Number
Kit - ML1 - PL GO Field Joint - 1.375D / 1.688D - Viton 90D - Sweet 10027168
Kit - ML1 - PL GO Field Joint - 1.375D / 1.688D - Aflas 90D - Med Sour 10023088
Kit - ML1 - PL GO Field Joint - 1.375D / 1.688D - Chemraz 90D - Sour 10023087
PL - SS8715 - Centralizer - Bow Spring to Roller (0.45' Dia roller) - Conversion Kit 10021306
Redress kit - PL - Misc pins & screw - Bow Spring Centralizer - Stainless Steel 10023547
Redress kit - PL - Misc pins & screw - Bow Spring Centralizer - Titanium 10023515
Redress Kit - PL - Bow Spring Centralizer - 4 x 23 lbs Bow Spring & Rivets 10023490
Redress kit - PL Bow spring Centralizer - 4 x 38 lbs bow spring & rivets 10023562
1Maximum values include a 20% safety factor. Minimum values include a 50% safety factor (recommended).
www.sparteksystems.com 11 Aug 2022 Cased Hole Logging Catalog
27
Standalone Analog Tools
Accessories
Item Description Item Number
Kit - ML1 - PL - Field Joint - 1.375D Aflas 90D / PEEK - Sour 10018336
Kit - ML1 - PL - Field Joint - 1.375D - Chemraz 90D / PEEK - Sour 10015753
Kit - ML1 - PL - Field Joint - 1.375D - Viton 90D / PEEK - Sweet 10015752
Kit - ML1 - SS8716 - E-Line Centralizer 177°C - 1.688D - Aflas 90D 10030050
Kit - ML1 - SS8716 - E-Line Centralizer 177°C - 1.688D - Chemraz 90D 10030049
Kit - ML2 - SS8716 - E-Line Centralizer - 177°C - 1.688D - Chemraz 90D / PEEK - Sour 10030048
PL - Manual - ML1+ML2 SS8716 SA/D PL E-Line Centralizer 10028937
1Maximum values include a 20% safety factor. Minimum values include a 50% safety factor (recommended).
www.sparteksystems.com 11 Aug 2022 Cased Hole Logging Catalog
28
1.0” Production Logging Tools
Accessories
Item Description Item Number
Kit - ML1 - PL - 1.0"D - Aflas 90D / PEEK 10023497
Accessories
Item Description Item Number
PL – Gamma Ray Calibration Fixture 10013605
SS8409 - Conversion kit - FBS to Continuous 3.75" sour (Thick Unshielded) 10023487
SS8715 SM - E-Line - Centralizer - Bow Spring (23 lb) - GO Subs - 177°C - 15000 psi - 1.375D - Sour 10023489
SS8305 Temperature
SS8305 Temperature
Item Description Item Number
SS8305 SA - Temperature - 177°C - 15000 psi - 1.000D - Sour 10021562
Accessories
Item Description Item Number
PL - Manual - ML1 SS8305 1.0D Temperature Tool 10023455
SS8315 Pressure
SS8315 Pressure
Item Description Item Number
SS8315 SA - Pressure - 177°C - 15000 psi - 1.000D - Sour 10021924
The Strain Gauge Pressure tool is used as part of the fluid Specifications
identification section of the Production Logging Tool. Outer Diameter 1.0"
Weight 2.75 lbs
• Compatible with the Spartek SRO System
Pressure Rating 15 K psi
• Electronic identification of serial-number and tool-type
Temperature Rating 177 C
• Fast response strain gauge pressure transducer
Material Inconel 718
Operating Voltage 7 – 17 VDC
Operating Current1 10 – 11 mA
Pressure Sensor (PRS)
Sensor Type Strain
Accuracy ± 0.1% Full Scale
Resolution 0.003% Full Scale
Accessories
Item Description Item Number
Kit - ML1 - PL - 1.0"D - Aflas 90D / PEEK 10023497
SS8565 Capacitance
SS8565 Capacitance
Item Description Item Number
SS8565 SB - Capacitance - 177°C - 15000 psi - 1.000D - Sour 10027324
Accessories
Item Description Item Number
PL - Manual - ML1+ML2 SS8565 SB 1.0D Capacitance Tool 10027398
The 3-arm Roller Folding Flow Meter is used to measure fluid Specifications
velocity in the Production Logging Tool. Outer Diameter 1.0"
Weight 4.5 lbs
• Compatible with the Spartek SRO System
Pressure Rating 15 K psi
• Electronic identification of serial-number and tool-type
Temperature Rating 177 C
• Easily replaceable blades
Material Inconel 718
• Continuous Flow meter Conversion kit available
Operating Voltage 7 – 17 V DC
• Spare-parts kit available Operating Current1 19 – 22 mA
Min. Logging Diameter 3.0"
Max. Centralizing Diameter 5.80"
Flow Meter Sensor (FLW)
Magnetic Detection 8 pulses / rev
Range 8 to ± 200 rps
Bearing Type Non-Sealed (x2)
Sensitivity2 2 ft / min
Accessories
Item Description Item Number
Ball Bearing 1 x - Steel - Not Sealed (Thick Unshielded) 10005289
Kit - ML3 - SS8405 SA - Fullbore Flow meter - 1.00D - Chemraz - sour (Thick Unshielded) 10028653
Kit - ML3 - SS8405 SA - Fullbore Flow meter - 1.00D - Chemraz - sour (Thin Unshielded) 10029412
Redress Kit - PL - Flow meter - All Types - 2 ball-bearings 2 set-screws 1 C-clip (Thick Unshielded) 10016575
PL - 1.00" - Bow Spring Folding to Bow spring Continuous Conversion Kit 10022510
PL - Redress Kit - 1.0"D - Misc pins & screw - Folding spinner - SA type 10023518
PL - Redress Kit - 1.0"D - 3 bow springs & rivets - Folding flow meter SA type 10023521
Spare Parts Kit - SS8405 SA -Flow Meter - Fullbore (Thick Unshielded) 10023494
Spare Parts Kit - SS8405 SA -Flow Meter - Fullbore (Thin Unshielded) 10029406
Accessories
Item Description Item Number
Ball Bearing 1 x - Steel - Not Sealed (Thick Unshielded) 10005289
Conversion Kit - Bow Spring Continuous - Bow spring to Folding Flowmeter 10023496
PL - 1.0" Continuous Flow Meter - Bow Spring Type (Thick Unshielded) - Spare Parts Kit 10023495
PL - 1.0" Continuous Flow meter spare parts kit - Bow spring type (Thin Unshielded) 10029421
Redress Kit - PL - Flow meter - All Types - 2 ball-bearings 2 set-screws 1 C-clip (Thick Unshielded) 10016575
PL - Redress Kit - 1.0"D - Misc pins & screw - Folding spinner - SB type 10023519
PL - Redress Kit - 1.0"D - 3 Bow Springs & Rivets - Folding Flow Meter SB type 10023520
Accessories
Accessories
Bullnose
Item Description Item Number
PL - 1" - Bullnose - 0.875"-12 SA Box 10021589
Provides a pressure seal for the bottom of the tool string and Specifications
is compatible with all 1.0" OD Production Logging Tool. Outer Diameter 1.0”
Makeup Length (ML) 3.50”
Weight 1.19 lbs
Material Inconel 718
Pressure Rating 15 K psi
Crossovers
Item Description ML Item Number
PL - Adapter - 1.0" PL Top to 1.375" PL Bottom - Sour 3.70” 10026891
Accessories
Miscellaneous Tools
Item Description Item Number
O-Ring Removal Tool - Plastic 10010354
Shipping Case
Item Description Item Number
Case - Transport - PL - 1.0D - 5 x 42.3" Slot 10021650
Accessories
Used to protect the PLT tool box and pin threads of each Specifications
individual sonde in the Production Logging Tool. Outer Diameter 1.0"
Weight 0.25 lbs
Material PVC
Accessories
This page is intentionally blank
Accessories
Accessories
Item Description Item Number
Kit - ML1 - PL - Field Joint - 1.375D Aflas 90D / PEEK - Sour 10018336
Kit - ML1 - PL - Field Joint - 1.375D - Chemraz 90D / PEEK - Sour 10015753
Kit - ML1 - PL - Field Joint - 1.375D - Viton 90D / PEEK - Sweet 10015752
Kit - ML2 - PL SRO Telemetry 1.375D / 1.688D - Chemraz 90D / Peek - Sour 10024620
1
Between 25° C and 177° C.
2 Maximum values include a 20% safety factor. Minimum values include a 50% safety factor (recommended).
3 Single axis in-line with tool body.
Accessories
Item Description Item Number
Kit - ML1 - PL - Field Joint - 1.375D Aflas 90D / PEEK - Sour 10018336
Kit - ML1 - PL - Field Joint - 1.375D - Chemraz 90D / PEEK - Sour 10015753
Kit - ML1 - PL - Field Joint - 1.375D - Viton 90D / PEEK - Sweet 10015752
Kit - ML1 - SS8120 SA - Memory - 1.375D - Chemraz 90D / PEEK - Sour 10028486
Kit - ML2 - PL SRO Telemetry 1.375D / 1.688D - Chemraz 90D / Peek - Sour 10024620
Accessories
Item Description Item Number
Kit - ML1 - PL - Field Joint - 1.375D Aflas 90D / PEEK - Sour 10018336
Kit - ML1 - PL - Field Joint - 1.375D - Chemraz 90D / PEEK - Sour 10015753
Kit - ML1 - PL - Field Joint - 1.375D - Viton 90D / PEEK - Sweet 10015752
Kit - ML1 - SS8335 SA - Compact Memory Enhanced - 1.375D - Chemraz 90D/ PEEK - Sour 10028597
1
Between 25° C and 177° C.
2 Maximum values include a 20% safety factor. Minimum values include a 50% safety factor (recommended).
3 Single axis in-line with tool body.
SS8195 SB - DBAM - 60 Min Delay - 177°C - 15000 psi - 1.375D - Sour 10026234
Accessories
Item Description Item Number
Kit - ML1 - PL - Field Joint - 1.375D Aflas 90D / PEEK - Sour 10018336
Kit - ML1 - PL - Field Joint - 1.375D - Chemraz 90D / PEEK - Sour 10015753
Kit - ML1 - PL - Field Joint - 1.375D - Viton 90D / PEEK - Sweet 10015752
Kit - ML2 - SS8195 SA/SB - DBAM - 1.375D - Chemraz 90D/ PEEK - Sour 10027948
1Maximum values include a 20% safety factor. Minimum values include a 50% safety factor (recommended).
www.sparteksystems.com 11 Aug 2022 Cased Hole Logging Catalog
45
1.375” Production Logging Tools
Accessories
Item Description Item Number
Kit - ML1 - PL - Field Joint - 1.375D Aflas 90D / PEEK - Sour 10018336
Kit - ML1 - PL - Field Joint - 1.375D - Chemraz 90D / PEEK - Sour 10015753
Kit - ML1 - PL - Field Joint - 1.375D - Viton 90D / PEEK - Sweet 10015752
1Maximum values include a 20% safety factor. Minimum values include a 50% safety factor (recommended).
www.sparteksystems.com 11 Aug 2022 Cased Hole Logging Catalog
46
1.375” Production Logging Tools
Accessories
Item Description Item Number
Grease - Metalon High-Tech EP 1.5 - 400 gm Tube 10027207
Grease Fitting with Ball Check - .25"-28 Straight Steel Zinc 10027338
Kit - ML1 - PL - Field Joint - 1.375D Aflas 90D / PEEK - Sour 10018336
Kit - ML1 - PL - Field Joint - 1.375D - Chemraz 90D / PEEK - Sour 10015753
Kit - ML1 - PL - Field Joint - 1.375D - Viton 90D / PEEK - Sweet 10015752
Kit - ML1 - SS8735 SB - Knuckle Joint - 1.375D - Grease Fitting and Plugs 10030594
Accessories
Item Description Item Number
Kit - ML1 - PL - Field Joint - 1.375D Aflas 90D / PEEK - Sour 10018336
Kit - ML1 - PL - Field Joint - 1.375D - Chemraz 90D / PEEK - Sour 10015753
Kit - ML1 - PL - Field Joint - 1.375D - Viton 90D / PEEK - Sweet 10015752
1
10 – 17 VDC for tools shipped prior to Dec 1, 2011.
2 Between 25° C and 177° C.
3 Maximum values include a 20% safety factor. Minimum values include a 50% safety factor (recommended).
The Casing Collar Locator or CCL tool is run as a part of the Specifications
depth correlation section of the Production Logging tools. Outer Diameter 1.375”
Weight 4.80 lbs
• Compatible with the Spartek SRO and Memory Logging
Pressure Rating 15 K psi
Systems
Temperature Rating 177 C
• Electronic identification of serial number and tool type
Material Inconel 718
Operating Voltage 7 – 17 V DC
Operating Current1 10 – 11 mA
Tension2 (min/max) 17 K / 28 K lbs
Compression2 (min/max) 17 K / 28 K lbs
Casing Collar Sensor (CCL)
Sensor Type Coil / Magnets
Gain Amplifier Adjustable
Accessories
Item Description Item Number
Kit - ML1 - PL - Field Joint - 1.375D Aflas 90D / PEEK - Sour 10018336
Kit - ML1 - PL - Field Joint - 1.375D - Chemraz 90D / PEEK - Sour 10015753
Kit - ML1 - PL - Field Joint - 1.375D - Viton 90D / PEEK - Sweet 10015752
Accessories
Item Description Item Number
Kit - ML1 - PL - Field Joint - 1.375D Aflas 90D / PEEK - Sour 10018336
Kit - ML1 - PL - Field Joint - 1.375D - Chemraz 90D / PEEK - Sour 10015753
Kit - ML1 - PL - Field Joint - 1.375D - Viton 90D / PEEK - Sweet 10015752
1
10 – 17 VDC for tools shipped prior to Dec 1, 2011.
2 Between 25° C and 177° C.
3 Maximum values include a 20% safety factor. Minimum values include a 50% safety factor (recommended).
Accessories
Item Description Item Number
Kit - ML1 - PL - Field Joint - 1.375D Aflas 90D / PEEK - Sour 10018336
Kit - ML1 - PL - Field Joint - 1.375D - Chemraz 90D / PEEK - Sour 10015753
Kit - ML1 - PL - Field Joint - 1.375D - Viton 90D / PEEK - Sweet 10015752
The Quartz Pressure and Temperature tool is part of the fluid Specifications
identification section of the Production Logging Tool. Outer Diameter 1.375"
Weight 4.66 lbs
• Compatible with the Spartek SRO and Memory Logging
Pressure Rating 15 K psi
Systems
Temperature Rating 177 C
• Electronic identification of serial number and tool type
Material Inconel 718
• High resolution quartz sensor
Operating Voltage 7 – 17 V DC
• Fast response external Temperature Probe
Operating Current1 14 – 17 mA
Tension2 (min/max) 17 K / 28 K lbs
Compression2 (min/max) 17 K / 28 K lbs
Pressure Sensor (PRS)
Sensor Type Quartz Crystal
Accuracy ± 3.0 psi
Resolution 0.008 psi
Temperature Sensor (TMP)
Sensor Type Fast Response RTD
Accuracy ± 1 C
Resolution < 0.005 C
Accessories
Item Description Item Number
Kit - ML1 - PL - Field Joint - 1.375D Aflas 90D / PEEK - Sour 10018336
Kit - ML1 - PL - Field Joint - 1.375D - Chemraz 90D / PEEK - Sour 10015753
Kit - ML1 - PL - Field Joint - 1.375D - Viton 90D / PEEK - Sweet 10015752
Kit - ML2 - SS8362 SA - Quartz P/T - 1.375D - Chemraz 90D/ PEEK - Sour 10027999
Accessories
Item Description Item Number
Kit - ML1 - PL - Field Joint - 1.375D Aflas 90D / PEEK - Sour 10018336
Kit - ML1 - PL - Field Joint - 1.375D - Chemraz 90D / PEEK - Sour 10015753
Kit - ML1 - PL - Field Joint - 1.375D - Viton 90D / PEEK - Sweet 10015752
1
Between 25 C and 177 C.
2 Maximum values include a 20% safety factor. Minimum values include a 50% safety factor (recommended).
3 For fluid viscosities less than 50 cp.
SS8560 Capacitance
SS8560 Capacitance
Item Description Item Number
SS8560 SB - Capacitance - 177°C - 15000 psi - 1.375D - Sour 10027310
Accessories
Item Description Item Number
Kit - ML1 - PL - Field Joint - 1.375D Aflas 90D / PEEK - Sour 10018336
Kit - ML1 - PL - Field Joint - 1.375D - Chemraz 90D / PEEK - Sour 10015753
Kit - ML1 - PL - Field Joint - 1.375D - Viton 90D / PEEK - Sweet 10015752
Applications
• Identification of different fluid phases in wellbore
• High flow rate wells
• Deviated wells
• Wells where minimising rig up length is important
Accessories
Item Description Item Number
Kit - ML1 - PL - Field Joint - 1.375D - Chemraz 90D / PEEK - Sour 10015753
Kit - ML1 - PL - Field Joint - 1.375D - Viton 90D / PEEK - Sweet 10015752
Radio Active Density - Calibration Block 10031822
Radio Active Density - Hand Tools - Kit 10030434
Source - Americium 241 - For SS8508 - RA-Density Tool 10030436
Source - Americium 241 - For SS8508 - RA-Density Tool 10030436
Accessories
Item Description Item Number
Kit - ML1 - PL GO Field Joint - 1.375D / 1.688D - Viton 90D - Sweet 10027168
Kit - ML1 - PL GO Field Joint - 1.375D / 1.688D - Aflas 90D - Med Sour 10023088
Kit - ML1 - PL GO Field Joint - 1.375D / 1.688D - Chemraz 90D - Sour 10023087
PL - SS8719 – Centralizer – Roller to Bow Spring (23 lbs max force) - Conversion Kit 10023111
PL - SS8719 – Centralizer – Roller to Bow Spring (38 lbs max force) - Conversion Kit 10021307
Redress Kit - PL - Misc Pins & Screw - E-line Centralizer - Roller Type 10023336
Kit - ML3 - SS8715 SA - E-Line Roller Centralizer - 1.375D - Chemraz - sour 10028148
1Maximum values include a 20% safety factor. Minimum values include a 50% safety factor (recommended).
www.sparteksystems.com 11 Aug 2022 Cased Hole Logging Catalog
56
1.375” Production Logging Tools
SS8715 SN - E-Line - Centralizer - Bow Spring (38 lb) - GO Subs - 177°C - 15000 psi - 1.375D - Sour 10023564
Accessories
Item Description Item Number
Kit - ML1 - PL GO Field Joint - 1.375D / 1.688D - Viton 90D - Sweet 10027168
Kit - ML1 - PL GO Field Joint - 1.375D / 1.688D - Aflas 90D - Med Sour 10023088
Kit - ML1 - PL GO Field Joint - 1.375D / 1.688D - Chemraz 90D - Sour 10023087
PL - SS8715 - Centralizer - Bow Spring to Roller (0.45' Dia roller) - Conversion Kit 10021306
Redress kit - PL - Misc pins & screw - Bow Spring Centralizer - Stainless Steel 10023547
Redress kit - PL - Misc pins & screw - Bow Spring Centralizer - Titanium 10023515
Redress Kit - PL - Bow Spring Centralizer - 4 x 23 lbs Bow Spring & Rivets 10023490
Redress kit - PL Bow spring Centralizer - 4 x 38 lbs bow spring & rivets 10023562
1Maximum values include a 20% safety factor. Minimum values include a 50% safety factor (recommended).
www.sparteksystems.com 11 Aug 2022 Cased Hole Logging Catalog
57
1.375” Production Logging Tools
Accessories
Item Description Item Number
Kit - ML1 - PL - Field Joint - 1.375D Aflas 90D / PEEK - Sour 10018336
Kit - ML1 - PL - Field Joint - 1.375D - Chemraz 90D / PEEK - Sour 10015753
Kit - ML1 - PL - Field Joint - 1.375D - Viton 90D / PEEK - Sweet 10015752
Kit - ML3 - SS8719 SA - In-Line Roller Centralizer - 1.375D - Chemraz - sour 10028658
PL - SS8719 – Centralizer – Roller to Bow Spring (23 lbs max force) - Conversion Kit 10023111
PL - SS8719 – Centralizer – Roller to Bow Spring (38 lbs max force) - Conversion Kit 10021307
Redress Kit - PL - Misc Pins & Screw - In-line Centralizer - Roller Type 10023285
SS8719 SN - Inline - Centralizer - Bow Spring (38 lb) - 177°C - 15000 psi - 1.375D – Sour 10023565
Accessories
Item Description Item Number
Kit - ML1 - PL - Field Joint - 1.375D Aflas 90D / PEEK - Sour 10018336
Kit - ML1 - PL - Field Joint - 1.375D - Chemraz 90D / PEEK - Sour 10015753
Kit - ML1 - PL - Field Joint - 1.375D - Viton 90D / PEEK - Sweet 10015752
PL - SS8715 - Centralizer - Bow Spring to Roller (0.45' Dia roller) - Conversion Kit 10021306
PL - 1.375" - In-line Centralizer - 23 lbs Bow Spring - Spare Parts Kit 10023360
Redress kit - PL - Misc pins & screw - Bow Spring Centralizer - Stainless Steel 10023547
Redress kit - PL - Misc pins & screw - Bow Spring Centralizer - Titanium 10023515
Redress Kit - PL - Bow Spring Centralizer - 4 x 23 lbs Bow Spring & Rivets 10023490
Redress kit - PL Bow spring Centralizer - 4 x 38 lbs bow spring & rivets 10023562
The X-Y Caliper is the available option in the casing diameter Specifications
measurement section of the Production Logging Tool. Outer Diameter 1.375”
Weight 10.20 lbs
• Compatible with the Spartek SRO and Memory Logging
Pressure Rating 15 K psi
Systems
Temperature Rating 177 C
• Electronic identification of serial number and tool type
Material Inconel 718
• 4 arms with rollers
Operating Current1 23 – 25 mA
• 3 sizes of rollers available
Min. Logging Diameter 1.6”
• Bow-spring conversion kit available
Max. Opening Diameter 9.0”
• Spare-parts kit available Tension2 (min/max) 12 K / 20 K lbs
Compression2 (min/max) 3.6 K / 6 K lbs
Arm Position Sensor (X/Y)
Resolution 0.02”
Accuracy ± 0.1”
Roller Size (OD) 0.45” 0.60” 0.80”
Max. Opening Diameter 8.7” 8.85” 9.05”
Min Closing Diameter 1.47” 1.77” 2.17”
Accessories
Item Description Item Number
Kit - ML1 - PL - Field Joint - 1.375D Aflas 90D / PEEK - Sour 10018336
Kit - ML1 - PL - Field Joint - 1.375D - Chemraz 90D / PEEK - Sour 10015753
Kit - ML1 - PL - Field Joint - 1.375D - Viton 90D / PEEK - Sweet 10015752
PL - Manual - ML3 SS8750 SA X-Y Caliper 10026445
PL - SS8750 - XY Caliper - Roller XY Caliper to Bow Spring XY Caliper - Conversion Kit 10023386
PL - Manual - ML1+ ML2 SS8750 SA X-Y Caliper Tool 10022581
Redress Kit - PL - 4 Axles - 440 Steel 10023082
Redress Kit - PL - 4 Rollers & 4 Axles - Roller 0.50"D - Carbide 10023283
Redress Kit - PL - 4 Rollers & 4 Axles - Roller 0.45"D - TM 10023280
Redress Kit - PL - 4 Rollers & 4 Axles - Roller 0.60"D - TM 10023281
Redress Kit - PL - Misc Pins & Screw - XY Caliper - Roller Type 10023326
X-Y Caliper calibration fixture - English 10020562
X-Y Caliper calibration fixture - metric 10020567
The X-Y Caliper is the available option in the casing and Specifications
borehole diameter measurement section of the Production Outer Diameter 1.375”
Logging Tool. Weight 10.20 lbs
Pressure Rating 15 K psi
• Compatible with the Spartek SRO and Memory Logging
Temperature Rating 177 C
Systems
Material Inconel 718
• Electronic identification of serial number and tool type
Operating Current1 23 – 25 mA
• 4 arms with bow-spring contact points
Min. Logging Diameter 1.6”
• Roller conversion kit available
Max. Opening Diameter 9.0”
• Spare-parts kit available Tension2 (min/max) 12 K / 20 K lbs
Compression2 (min/max) 3.6 K / 6 K lbs
Arm Position Sensor (X/Y)
Resolution 0.02”
Accuracy ± 0.1”
Accessories
Item Description Item Number
Kit - ML1 - PL - Field Joint - 1.375D Aflas 90D / PEEK - Sour 10018336
Kit - ML1 - PL - Field Joint - 1.375D - Chemraz 90D / PEEK - Sour 10015753
Kit - ML1 - PL - Field Joint - 1.375D - Viton 90D / PEEK - Sweet 10015752
PL - Manual - ML1+ML2 SS8750 SM X-Y Caliper Tool 10025567
PL - Manual - ML3 SS8750 SA X-Y Caliper 10026445
PL - SS8750 - XY Caliper - Bow Spring XY Caliper to Roller XY Caliper - Conversion Kit 10023384
Redress Kit - PL - Misc Pins & Screw - XY Caliper - Bow Spring Type 10023513
Redress Kit - PL - Bow Spring Caliper - 4 Bow Spring & Rivets 10023511
X-Y Caliper calibration fixture - English 10020562
X-Y Caliper calibration fixture - metric 10020567
The 1.688” In-Line Flow meter is one of the options in the Specifications
flow measurement section of the Production Logging Tool. Outer Diameter 1.688”
Weight 3.97 lbs
• Compatible with the Spartek SRO and Memory Logging
Pressure Rating 15 K psi
Systems
Temperature Rating 177 C
• Electronic identification of serial number and tool type
Material Inconel 718
• Quick & easy access to bearings and blade mechanism
Operating Voltage 7 – 17 V DC
• Can be placed anywhere in the tool string
Operating Current1 19 – 22 mA
• Spare-parts kit available
Min. Logging Diameter 1.688”
Tension2 (min/max) 17 K / 28 K lbs
Compression2 (min/max) 17 K / 28 K lbs
Flow Meter Sensor (FLW)
Impellor 4-Blade PEEK
Size 1.053” dia. x 0.850” L
Pitch 5.623 rev / ft
Magnetic Detection 8 pulses / rev
Range ±200 rev / sec
Bearing Type Non-Sealed (x2)
Sensitivity3 8 ft / min
Accessories
Item Description Item Number
Ball Bearing 1 x - Steel - Not Sealed (Thick Unshielded) 10005289
Kit - ML1 - PL - Field Joint - 1.375D Aflas 90D / PEEK - Sour 10018336
Kit - ML1 - PL - Field Joint - 1.375D - Chemraz 90D / PEEK - Sour 10015753
Kit - ML1 - PL - Field Joint - 1.375D - Viton 90D / PEEK - Sweet 10015752
Kit - ML3 - SS8442 SA/B - In LIne Flow - 1.375D - Chemraz - sour (Thin Unshielded) 10029404
Kit - ML3 - SS8442 SA/B - In LIne Flow - 1.375D - Chemraz - sour (Thick Unshielded) 10028143
Redress Kit - PL - Flow meter - All Types - 2 ball-bearings 2 set-screws 1 C-clip (Thick Unshielded) 10016575
PL - Redress kit - Flow meter - All Types - 2 ball-bearings 2 set-screws 1 C-clip (Thin Unshielded) 10029401
PL - SS8442 SA/B - Flow Meter - Inline - Spare Parts Kit (Thick Unshielded) 10017413
PL - SS8442 SA/B - Flow Meter - Inline - Spare Parts Kit (Thin Unshielded) 10029397
PL- Impeller - 4-blade PEEK - 1.40"dia x 0.85”L - pitch: 5.275 rev/ft 10020081
1
Between 25 C and 177 C.
2 Maximum values include a 20% safety factor. Minimum values include a 50% safety factor (recommended).
3 Sensor threshold measured in fluid flow.
The 2.125” In-Line Flow meter is one of the options in the Specifications
flow measurement section of the Production Logging Tool. Outer Diameter 2.125”
Weight 5.95 lbs
• Compatible with the Spartek SRO and Memory Logging
Pressure Rating 15 K psi
Systems
Temperature Rating 177 C
• Electronic identification of serial number and tool type
Material Inconel 718
• Quick & easy access to bearings and blade mechanism
Operating Voltage 7 – 17 V DC
• Can be placed anywhere in the tool string
Operating Current1 19 – 22 mA
• Spare-parts kit available
Min. Logging Diameter 2.125”
Tension2 (min/max) 17 K / 28 K lbs
Compression2 (min/max) 17 K / 28 K lbs
Flow Meter Sensor (FLW)
Impellor 4-Blade PEEK
Size 1.40” dia. x 2.00” L
Pitch 2.279 rev / ft
Magnetic Detection 8 pulses / rev
Range ±200 rev / sec
Bearing Type Non-Sealed (x2)
Sensitivity3 8 ft / min
Accessories
Item Description Item Number
Ball Bearing 1 x - Steel - Not Sealed (Thick Unshielded) 10005289
Ball Bearing 1 x - Steel - Sealed (Thick Sealed) 10025502
Ball Bearing 10 x - Steel - Sealed (Thick Sealed) 10025577
Ball Bearing 10x - Steel - Not Sealed (Thick Unshielded) 10025576
Ball Bearing 10x - Steel - Not Sealed (Thin Unshielded) 10029405
Kit - ML1 - PL - Field Joint - 1.375D Aflas 90D / PEEK - Sour 10018336
Kit - ML1 - PL - Field Joint - 1.375D - Chemraz 90D / PEEK - Sour 10015753
Kit - ML1 - PL - Field Joint - 1.375D - Viton 90D / PEEK - Sweet 10015752
Kit - ML3 - SS8442 SA/B - In LIne Flow - 1.375D - Chemraz - sour (Thin Unshielded) 10029404
Kit - ML3 - SS8442 SA/B - In LIne Flow - 1.375D - Chemraz - sour (Thick Unshielded) 10028143
PL - 1.375" - Bearing Hub (Thick Bearings) 10005699
PL - 1.375" - Bearing Hub (Thin Bearings) 10023792
PL - Impeller - 4-blade PEEK - 1.40"dia x 2.00”L - pitch: 2.279 rev/ft 10020620
PL - Manual - ML1+ML2 SS8442 SB Inline Flow Meters 10025598
PL - Manual - ML3 SS8442 Inline Flowmeter 10026441
Redress Kit - PL - Flow meter - All Types - 2 ball-bearings 2 set-screws 1 C-clip (Thick Unshielded) 10016575
PL - Redress kit - Flow meter - All Types - 2 ball-bearings 2 set-screws 1 C-clip (Thin Unshielded) 10029401
PL - SS8442 SA/B - Flow Meter - Inline - Spare Parts Kit (Thick Unshielded) 10017413
PL - SS8442 SA/B - Flow Meter - Inline - Spare Parts Kit (Thin Unshielded) 10029397
1
Between 25 C and 177 C.
2 Maximum values include a 20% safety factor. Minimum values include a 50% safety factor (recommended).
3 Sensor threshold measured in fluid flow.
SS8431 SA - 1.375" - CFM - Ball/Jewel Bearing - 177°C - 15000 psi – 1.688D– Sour 10033630
Accessories
Item Description Item Number
Kit - ML1 - SS8431 - Ceramic Bearings (Thin Bearing) 10034125
Kit - ML2 - SS8431 - Continuous Flow Meter - Aflas - Med Sour 10034123
PL - SS8431SA/8484SA - 1.688" CFM - 6 Blade Impeller - 1.27"OD - 0.4"W - 4.0 ins/rev - Titanium 10033659
1
Between 25 C and 177 C.
2 Maximum values include a 20% safety factor. Minimum values include a 50% safety factor (recommended).
3 Sensor threshold measured in fluid flow.
SS8431 SB - 1.375" - CFM - Ball/Jewel Bearing - 177°C - 15000 psi – 2.125D – Sour 10031809
Accessories
Item Description Item Number
Kit - ML1 - SS8431 - Ceramic Bearings (Thin Bearing) 10034125
Kit - ML2 - SS8431 - Continuous Flow Meter - Aflas - Med Sour 10034123
PL - SS8431SB/8484SB - 2.125" CFM - 6 Blade Impeller - 1.70"OD - 0.4"W - 4.0 ins/rev - Titanium 10033709
1
Between 25 C and 177 C.
2 Maximum values include a 20% safety factor. Minimum values include a 50% safety factor (recommended).
3 Sensor threshold measured in fluid flow.
SS8431 SC - 1.375" - CFM - Ball/Jewel Bearing - 177°C - 15000 psi – 2.875D – Sour 10033718
Accessories
Item Description Item Number
Kit - ML1 - SS8431 - Ceramic Bearings (Thin Bearing) 10034125
Kit - ML2 - SS8431 - Continuous Flow Meter - Aflas - Med Sour 10034123
PL - SS8431SC/8484SC - 2.875" CFM - 6 Blade Impeller - 2.25"OD - 0.4"W - 4.0 ins/rev - Titanium 10033710
1
Between 25 C and 177 C.
2 Maximum values include a 20% safety factor. Minimum values include a 50% safety factor (recommended).
3 Sensor threshold measured in fluid flow.
Accessories
Item Description Item Number
Ball Bearing 1 x - Steel - Not Sealed (Thick Unshielded) 10005289
Conversion Kit - SS8430 SA/SC to SS8430 SB - Continuous Flow Meter - Solid Shroud - 2.125" 10016705
Conversion Kit - SS8430 SA/SC to SS8430 SB - Continuous Flow Meter - Slotted Shroud - 2.125" 10031803
Conversion Kit - SS8430 SA/SB to SS8430 SC - Continuous Flow Meter - Solid Shroud - 2.875" 10016706
Conversion Kit - SS8430 SA/SB to SS8430 SC - Continuous Flow Meter - Slotted Shroud - 2.875" 10031804
Kit - ML3 - SS8430 SA/B/C - CFM - 1.375D - Chemraz - sour (Thick Unshielded) 10028146
Kit - ML3 - SS8430 SA/B/C - CFM - 1.375D - Chemraz - sour (Thin Unshielded) 10029408
Redress Kit - PL - Flow meter - All Types - 2 ball-bearings 2 set-screws 1 C-clip (Thick Unshielded) 10016575
PL - Redress kit - Flow meter - All Types - 2 ball-bearings 2 set-screws 1 C-clip (Thin Unshielded) 10029401
PL - SS8430 - Flow Meter - 4-blade PEEK – 1.375”dia x .625”L - pitch 5.161 rev/ft 10016164
PL - SS8430 SA/B/C Continuous Flow Meter - Spare parts Kit (Thick Unshielded) 10017059
PL - SS8430 SA/B/C Continuous Flow Meter - Spare parts kit (Thin Unshielded) 10029395
1
Between 25 C and 177 C.
2 Maximum values include a 20% safety factor. Minimum values include a 50% safety factor (recommended).
3 Sensor threshold measured in fluid flow.
Accessories
Item Description Item Number
Ball Bearing 1 x - Steel - Not Sealed (Thick Unshielded) 10005289
Conversion Kit - SS8430 SB/SC to SS8430 SA - Continuous Flow Meter - Solid Shroud - 1.687" 10016704
Conversion Kit - SS8430 SB/SC to SS8430 SA - Continuous Flow Meter - Slotted Shroud - 1.687" 10031802
Conversion Kit - SS8430 SA/SB to SS8430 SC - Continuous Flow Meter - Solid Shroud - 2.875" 10016706
Conversion Kit - SS8430 SA/SB to SS8430 SC - Continuous Flow Meter - Slotted Shroud - 2.875" 10031804
Kit - ML3 - SS8430 SA/B/C - CFM - 1.375D - Chemraz - sour (Thick Unshielded) 10028146
Kit - ML3 - SS8430 SA/B/C - CFM - 1.375D - Chemraz - sour (Thin Unshielded) 10029408
Redress Kit - PL - Flow meter - All Types - 2 ball-bearings 2 set-screws 1 C-clip (Thick Unshielded) 10016575
PL - Redress kit - Flow meter - All Types - 2 ball-bearings 2 set-screws 1 C-clip (Thin Unshielded) 10029401
PL - SS8430 SA/B/C Continuous Flow Meter - Spare parts Kit (Thick Unshielded) 10017059
PL - SS8430 SA/B/C Continuous Flow Meter - Spare parts kit (Thin Unshielded) 10029395
1
Between 25 C and 177 C.
2 Maximum values include a 20% safety factor. Minimum values include a 50% safety factor (recommended).
3 Sensor threshold measured in fluid flow.
Accessories
Item Description Item Number
PL - Impeller - 4-Blade – 2.250”OD x 0.625”L - Pitch X.X Ins/Rev - PEEK 10016771
Conversion Kit - SS8430 SA/SC to SS8430 SB - Continuous Flow Meter - Solid Shroud - 2.125" 10016705
Conversion Kit - SS8430 SB/SC to SS8430 SA - Continuous Flow Meter - Slotted Shroud - 1.687" 10031802
Conversion Kit - SS8430 SB/SC to SS8430 SA - Continuous Flow Meter - Solid Shroud - 1.687" 10016704
Conversion Kit - SS8430 SA/SC to SS8430 SB - Continuous Flow Meter - Slotted Shroud - 2.125" 10031803
Kit - ML3 - SS8430 SA/B/C - CFM - 1.375D - Chemraz - sour (Thick Unshielded) 10028146
Kit - ML3 - SS8430 SA/B/C - CFM - 1.375D - Chemraz - sour (Thin Unshielded) 10029408
Redress Kit - PL - Flow meter - All Types - 2 ball-bearings 2 set-screws 1 C-clip (Thick Unshielded) 10016575
PL - Redress kit - Flow meter - All Types - 2 ball-bearings 2 set-screws 1 C-clip (Thin Unshielded) 10029401
PL - SS8430 SA/B/C Continuous Flow Meter - Spare parts Kit (Thick Unshielded) 10017059
PL - SS8430 SA/B/C Continuous Flow Meter - Spare parts kit (Thin Unshielded) 10029395
The 3-arm Roller Full-bore Folding Flow Meter is one of the Specifications
available options in the flow measurement section of the Tool Size 1.375”
Production Logging Tool. Weight 5.00 lbs
Pressure Rating 15 K psi
• Compatible with the Spartek SRO and Memory Logging
Temperature Rating 177 C
Systems
Material Inconel 718
• Electronic identification of serial-number and tool-type
Operating Voltage 7 – 17 V DC
• Small, medium and basket diameter kits available
Operating Current1 19 – 22 mA
• Two sizes of rollers available
Logging Diameter2 3.80 – 4.60”
• Easily replaceable blades Tension3 (min/max) 14.4 K / 24 K lbs
• Spare-parts kit available Compression3 (min/max) 7 K / 12 K lbs
• Bow-spring conversion kit available Flow Meter Sensor (FLW)
Impellor 4-Blade Titanium
Size 2.47” dia. x 0.205” L
Pitch 6.0 rev / ft
Magnetic Detection 8 pulses / rev
Range ±200 rev / sec
Bearing Type Non-Sealed (x2)
Sensitivity4 2 ft / min
Accessories
Item Description Item Number
Kit - ML3 - SS8409 SA/B/C - Fullbore Flow meter - 1.375D - Chemraz - sour (Thick Unshielded) 10028144
Kit - ML3 - SS8409 SA/B/C - Fullbore Flow Meter- 1.375D - Chemraz - sour (Thin Unshielded) 10029393
Redress Kit - PL - Flow meter - All Types - 2 ball-bearings 2 set-screws 1 C-clip (Thick Unshielded) 10016575
PL - Redress kit - Flow meter - All Types - 2 ball-bearings 2 set-screws 1 C-clip (Thin Unshielded) 10029401
Redress Kit - PL - Misc Pins & Screw – Folding Flow Meter - Roller Type 10023327
Conversion Kit - SS8409 SX to SS8409 SC - FBS - Roller - Large Diameter Kit (6.20" – 8.20") 10016714
Conversion Kit - SS8409 SX to SS8409 SB - FBS - Roller - Medium Diameter (4.50" – 6.50") 10016713
Conversion Kit - SS8409 SX to SS8409 SO - FBS - Bow Spring - Large Diameter (6.20" - 8.20") 10021339
Conversion Kit - SS8409 SX to SS8409 SN - FBS - Bow Spring - Medium Diameter (4.50" - 6.50") 10021338
Conversion Kit - SS8409 SX to SS8409 SM - FBS - Bow Spring - Small Diameter (3.80" - 4.60") 10021320
Spare Parts Kit - SS8409 SA/B/C - Flow Meter – Fullbore (Thin Unshielded) 10029392
Spare Parts Kit - SS8409 SA/B/C - Flow Meter – Fullbore (Thick Unshielded) 10009514
The 3-arm Roller Full-bore Folding Flow Meter is one of the Specifications
available options in the flow measurement section of the Tool Size 1.375”
Production Logging Tool. Weight 5.00 lbs
Pressure Rating 15 K psi
• Compatible with the Spartek SRO and Memory Logging
Temperature Rating 177 C
Systems
Material Inconel 718
• Electronic identification of serial-number and tool-type
Operating Voltage 7 – 17 V DC
• Small, medium and basket diameter kits available
Operating Current1 19 – 22 mA
• Two sizes of rollers available
Logging Diameter2 4.50 – 6.50”
• Bow-spring conversion kit available Tension3 (min/max) 14.4 K/ 24 K lbs
• Easily replaceable blades Compression3 (min/max) 7 K / 12 K lbs
• Spare-parts kit available Flow Meter Sensor (FLW)
Impellor 4-Blade Titanium
Size 3.175” dia. x 0.205” L
Pitch 5.0 rev / ft
Magnetic Detection 8 pulses / rev
Range ±200 rev / sec
Bearing Type Non-Sealed (x2)
Sensitivity4 2 ft / min
Accessories
Item Description Item Number
Kit - ML3 - SS8409 SA/B/C - Fullbore Flow meter - 1.375D - Chemraz - sour (Thick Unshielded) 10028144
Kit - ML3 - SS8409 SA/B/C - Fullbore Flow Meter- 1.375D - Chemraz - sour (Thin Unshielded) 10029393
Redress Kit - PL - Flow meter - All Types - 2 ball-bearings 2 set-screws 1 C-clip (Thick Unshielded) 10016575
PL - Redress kit - Flow meter - All Types - 2 ball-bearings 2 set-screws 1 C-clip (Thin Unshielded) 10029401
Redress Kit - PL - Misc Pins & Screw – Folding Flow Meter - Roller Type 10023327
Conversion Kit - SS8409 SX to SS8409 SC - FBS - Roller - Large Diameter Kit (6.20" – 8.20") 10016714
Conversion Kit - SS8409 SX to SS8409 SA - FBS - Roller - Small Diameter (3.80" – 4.60") 10016712
Conversion Kit - SS8409 SX to SS8409 SO - FBS - Bow Spring - Large Diameter (6.20" - 8.20") 10021339
Conversion Kit - SS8409 SX to SS8409 SN - FBS - Bow Spring - Medium Diameter (4.50" - 6.50") 10021338
Conversion Kit - SS8409 SX to SS8409 SM - FBS - Bow Spring - Small Diameter (3.80" - 4.60") 10021320
Spare Parts Kit - SS8409 SA/B/C - Flow Meter – Fullbore (Thin Unshielded) 10029392
Spare Parts Kit - SS8409 SA/B/C - Flow Meter – Fullbore (Thick Unshielded) 10009514
The 3-arm Roller Full-bore Folding Flow Meter is one of the Specifications
available options in the flow measurement section of the Tool Size 1.375”
Production Logging Tool. Weight 5.00 lbs
Pressure Rating 15 K psi
• Compatible with the Spartek SRO and Memory Logging
Temperature Rating 177 C
Systems
Material Inconel 718
• Electronic identification of serial-number and tool-type
Operating Voltage 7 – 17 V DC
• Small, medium and basket diameter kits available
Operating Current1 19 – 22 mA
• Two sizes of rollers available
Logging Diameter2 6.20 – 8.20”
• Bow-spring conversion kit available Tension3 (min/max) 14.4 K / 24 K lbs
• Easily replaceable blades Compression3 (min/max) 7 K / 12 K lbs
• Spare-parts kit available Flow Meter Sensor (FLW)
Impellor 4-Blade Titanium
Size 4.40” dia. x 0.205” L
Pitch 3.871 rev / ft
Magnetic Detection 8 pulses / rev
Range ±200 rev / sec
Bearing Type Non-Sealed (x2)
Sensitivity4 2 ft / min
Accessories
Item Description Item Number
Kit - ML3 - SS8409 SA/B/C - Fullbore Flow meter - 1.375D - Chemraz - sour (Thick Unshielded) 10028144
Kit - ML3 - SS8409 SA/B/C - Fullbore Flow Meter- 1.375D - Chemraz - sour (Thin Unshielded) 10029393
Redress Kit - PL - Flow meter - All Types - 2 ball-bearings 2 set-screws 1 C-clip (Thick Unshielded) 10016575
PL - Redress kit - Flow meter - All Types - 2 ball-bearings 2 set-screws 1 C-clip (Thin Unshielded) 10029401
Redress Kit - PL - Misc Pins & Screw – Folding Flow Meter - Roller Type 10023327
Conversion Kit - SS8409 SX to SS8409 SB - FBS - Roller - Medium Diameter (4.50" – 6.50") 10016713
Conversion Kit - SS8409 SX to SS8409 SA - FBS - Roller - Small Diameter (3.80" – 4.60") 10016712
Conversion Kit - SS8409 SX to SS8409 SO - FBS - Bow Spring - Large Diameter (6.20" - 8.20") 10021339
Conversion Kit - SS8409 SX to SS8409 SN - FBS - Bow Spring - Medium Diameter (4.50" - 6.50") 10021338
Conversion Kit - SS8409 SX to SS8409 SM - FBS - Bow Spring - Small Diameter (3.80" - 4.60") 10021320
Spare Parts Kit - SS8409 SA/B/C - Flow Meter – Fullbore (Thin Unshielded) 10029392
Spare Parts Kit - SS8409 SA/B/C - Flow Meter – Fullbore (Thick Unshielded) 10009514
Accessories
Item Description Item Number
Kit - ML3 - SS8409 SM - Fullbore Flow meter - 1.375D - Chemraz - sour (Thin Unshielded) 10029414
Kit - ML3 - SS8409 SM - Fullbore Flow meter - 1.375D - Chemraz - sour (Thick Unshielded) 10028150
Redress Kit - PL - Flow meter - All Types - 2 ball-bearings 2 set-screws 1 C-clip (Thick Unshielded) 10016575
PL - Redress kit - Flow meter - All Types - 2 ball-bearings 2 set-screws 1 C-clip (Thin Unshielded) 10029401
Redress Kit - PL - Misc Pins & Screw - Folding Spinner – Bow Spring Type 10023514
PL - 1.375" - Folding Flow Meter - Bow Spring (Thick Unshielded) - Spare Parts Kit 10023476
PL - Spare parts kit - Folding Flow Meter - Bow Spring (Thin Unshielded) 10029407
PL - SS8409 - Flow Meter - Fullbore - Bow Spring - Large Diameter Kit (6.20" – 8.20") 10023483
PL - SS8409 - Flow Meter - Fullbore - Bow Spring - Small Diameter Kit (3.80" - 4.60") 10024112
PL - SS8409 - Flow Meter - Fullbore - Bows Spring - Medium Diameter Kit (4.50" – 6.50") 10023482
Conversion Kit - SS8409 SX to SS8409 SA - FBS - Roller - Small Diameter (3.80" – 4.60") 10016712
Redress Kit - PL - 1.375"D - 3 Bow Springs & Rivets - Folding Flow Meter - SS8409 SM/N/O 10023821
Accessories
Item Description Item Number
Kit - ML3 - SS8409 SN - Fullbore Flow meter - 1.375D - Chemraz - sour (Thin Unshielded) 10029413
Kit - ML3 - SS8409 SN - Fullbore Flow meter - 1.375D - Chemraz - sour (Thick Unshielded) 10028151
Redress Kit - PL - Flow meter - All Types - 2 ball-bearings 2 set-screws 1 C-clip (Thick Unshielded) 10016575
PL - Redress kit - Flow meter - All Types - 2 ball-bearings 2 set-screws 1 C-clip (Thin Unshielded) 10029401
Redress Kit - PL - Misc Pins & Screw - Folding Spinner – Bow Spring Type 10023514
PL - 1.375" - Folding Flow Meter - Bow Spring (Thick Unshielded) - Spare Parts Kit 10023476
PL - Spare parts kit - Folding Flow Meter - Bow Spring (Thin Unshielded) 10029407
PL - SS8409 - Flow Meter - Fullbore - Bow Spring - Large Diameter Kit (6.20" – 8.20") 10023483
PL - SS8409 - Flow Meter - Fullbore - Bow Spring - Small Diameter Kit (3.80" - 4.60") 10024112
PL - SS8409 - Flow Meter - Fullbore - Bows Spring - Medium Diameter Kit (4.50" – 6.50") 10023482
Conversion Kit - SS8409 SX to SS8409 SA - FBS - Roller - Small Diameter (3.80" – 4.60") 10016712
Redress Kit - PL - 1.375"D - 3 Bow Springs & Rivets - Folding Flow Meter - SS8409 SM/N/O 10023821
Accessories
Item Description Item Number
Kit - ML3 - SS8409 SO - Fullbore Flow meter - 1.375D - Chemraz - sour (Thick Unshielded) 10028152
Kit - ML3 - SS8409 SO - Fullbore Flow meter - 1.375D - Chemraz - sour (Thin Unshielded) 10029411
Redress Kit - PL - Flow meter - All Types - 2 ball-bearings 2 set-screws 1 C-clip (Thick Unshielded) 10016575
PL - Redress kit - Flow meter - All Types - 2 ball-bearings 2 set-screws 1 C-clip (Thin Unshielded) 10029401
Redress Kit - PL - Misc Pins & Screw - Folding Spinner – Bow Spring Type 10023514
PL - 1.375" - Folding Flow Meter - Bow Spring (Thick Unshielded) - Spare Parts Kit 10023476
PL - Spare parts kit - Folding Flow Meter - Bow Spring (Thin Unshielded) 10029407
PL - SS8409 - Flow Meter - Fullbore - Bow Spring - Large Diameter Kit (6.20" – 8.20") 10023483
PL - SS8409 - Flow Meter - Fullbore - Bow Spring - Small Diameter Kit (3.80" - 4.60") 10024112
PL - SS8409 - Flow Meter - Fullbore - Bows Spring - Medium Diameter Kit (4.50" – 6.50") 10023482
Conversion Kit - SS8409 SX to SS8409 SA - FBS - Roller - Small Diameter (3.80" – 4.60") 10016712
Redress Kit - PL - 1.375"D - 3 Bow Springs & Rivets - Folding Flow Meter - SS8409 SM/N/O 10023821
Accessories
Item Description Item Number
Kit - ML1 - PL - Field Joint - 1.375D Aflas 90D / PEEK - Sour 10018336
Kit - ML1 - PL - Field Joint - 1.375D - Chemraz 90D / PEEK - Sour 10015753
Kit - ML1 - PL - Field Joint - 1.375D - Viton 90D / PEEK - Sweet 10015752
Accessories
Accessories
Battery housing options for use with the Memory Production Specifications
Logging Tool (MPLT) or the Compact Memory Production Outer Diameter 1.375”
Logging Tool (CPLT). 14.0” (standard)
Makeup Length (ML)
21.66” (extended)
Pressure Rating 15 K psi
Temperature Rating 177 C
Material Inconel 718
Box Thread 1.25”-12 TPI Stub Acme
Battery Packs
Item Description Item Number
PL - Battery Pack - 3 x "C" - 6.8Ah - 11.7V - 165°C - Locking - 11 Pin 10024608
PL - Battery Pack - 4 x "C" - 4.0Ah - 14.4V - 200°C- Locking - 11 Pin 10012414
PL - Battery Pack - 4 x "C" - 6.8Ah - 15.6V - 165° C - Locking - 11 Pin 10011973
PL - Battery Pack - 4 x "CC" - 12.0Ah - 15.6V - 165°C - Locking - 11 Pin 10019454
Lithium Battery Packs for use with the Memory Production Capacity (Ah)1 Run Time (hours)2
Logging Tool (MPLT) or the Compact Memory Production 4.0 20
Logging Tool (CPLT) 5.0 25
12.0 60
• Three temperature ranges available
• Two voltage ranges (11.7V or 14.4V)
• Locking 11-pin connector
• Unique serial number on each pack
1
Battery pack capacity values (Amp hours) are based on worst case conditions.
2Estimated run time is based on a typical PLT tool string configuration drawing approximately 200 mA.
-Typical PLT string: MEM + CENT + GR/CCL + TP + CAP + ADT + ILS + CENT + FBS
www.sparteksystems.com 11 Aug 2022 Cased Hole Logging Catalog
77
1.375” Production Logging Tools
Accessories
Bullnose
Item Description ML Item Number
Bullnose - 1.375D - GO Box - 15000 psi - Sour 4.00” 10027570
PL - 1.375" - Bullnose - 1.24"-12 SA Box 4.05” 10009518
The Bullnose provides a pressure seal for the bottom of the Specifications
tool. Outer Diameter 1.375”
Makeup Length 4.05”
• Compatible with all Spartek PL tools
Weight 1.19 lbs
Pressure Rating 15 K psi
Temperature Rating 177 C
Material Inconel 718
Crossovers (Spartek)
Item Description ML Item Number
Crossover - PL - 1.375" PL Box to 3/4”-16 UNF - Sour 4.0” 10022954
Crossover - PL - 1.375" PL Box to 3/4”-16 UNF - Box - Sweet 3.0” 10008347
Crossover - PL - 1.375" PL Box to 5/8" Sucker Rod Box - Sour 4.0” 10022885
Crossover - PL - Go Pin Box to 5/8" Sucker Rod Box - Sour 5.0” 10026505
Crossovers (Standard)
Item Description ML Item Number
Crossover - 1.375" OD - 5/8" Sucker Rod Pin to 3/4”-16 UNF Box - Sour 2.25” 10023014
Crossover - 1.375" OD - 3/4" 16 UNF Pin to 5/8" Sucker Rod Box - Sour 2.40” 10023018
Crossover - 1.375" OD - 3/4” 16 UNF Pin to 5/8" Sucker Rod-Box - Sweet 2.40” 10023019
Crossover - 1.375" OD - 5/8" Sucker Rod Pin to 3/4”-16 UNF Box - Sweet 2.25” 10023015
Accessories
Miscellaneous Tools
Item Description Item Number
O-Ring Removal Tool - Plastic 10010354
PL - 1.375" - Field-Joint Connector - Go / No Go Gauge 10013023
PL - Field-Joint Connector Installation & Removal Tool 10017339
Wrench - Open End - 1-1/4" - Short 10009189
Shipping Cases
Item Description Item Number
Case - Transport - PL - 1.375D - 5 x 40.0" Slot 10030316
Case - Transport - PL - 1.375D - 5 x 43.5" Slot 10005119
Accessories
The thread protectors are used to protect the GO tool box Specifications
and pin threads of each individual sonde in the Production Outer Diameter 1.375”
Logging Tool. Weight 0.35 lbs
Material PVC
• Compatible with 1.375” O.D. GO tools
• Protects threads and O-rings during transportation
• Prevents moisture entering tool connectors while
washing tools
The thread protectors are used to protect the tool box and Specifications
pin threads of each individual sonde in the Production Outer Diameter 1.375”
Logging Tool. Weight 0.35 lbs
Material PVC
• Compatible with all Spartek or 1.375” OD PL Tools
• Protects threads and O-rings during transportation
• Prevents moisture entering tool connectors while
washing tools
Accessories
Accessories
Item Description Item Number
Kit - ML2 - PL SRO Telemetry 1.375D / 1.688D - Chemraz 90D / Peek - Sour 10024620
The SS8150 is a Hybrid SRO Controller that supports our new Specifications
data framing structure for surface communications. It is Outer Diameter 1.688”
capable of supporting array type data sensors and variable Weight 15.78 lbs
sample rates. Makeup Length 46.21”
Pressure Rating 15 K psi
Features Temperature Rating 177 C
• Power: Wireline or Battery Pack Material Inconel 718
• Modes: SRO (Warrior), Memory (SparWorks) & Hybrid Operating Voltage 175 V DC
(Mixed) (nominal)
• Sampling: Varying Sample Rates & Complex Array Data Operating Current 25 mA
Voltage Range 120 – 240 V DC
SS8150 Modem SS8150 Modem
• 50 K bits / sec Uplink Downlink 5 K bps
• Enhanced Power Supply Uplink 50 K bps
• Control - Bi-Directional Uplink & Down Link Weight 9.60 lbs
• Standard 1-3/16”-12 GO box connection at top Makeup Length 27.10”
SS8122 Controller
SS8122 Hybrid SRO/Memory Controller Tool Bus 115 K / 460.8 K bps
• 1 GB Memory Memory 1 G bytes
• High Speed USB Dump Channel Weight 9.60 lbs
• Tool Bus Power Management (enhanced DBAM) Makeup Length 19.11”
• Audible Indicator for Power Activation (memory) Cablehead Voltage Range 0 – 240 V
• Cablehead (or Battery) Voltage & Current Accelerometer (ACC)
• Incorporates a three-axis accelerometer for measuring Range ±5 g
tool movement and inclination. Resolution 0.01g
• Automatic connected tool sonde detection
Accessories
Item Description Item Number
Kit - ML1 - SS8122 SB - Memory - 1.688D - Aflas 83D / PEEK 10031846
Kit - ML1 - SS8122 SB - Memory - 1.688D - Kalrez 90D / PEEK - Sour 10031847
Kit - ML1 - SS8122 SB - Memory - 1.688D - Viton 90D / PEEK - Sweet 10031845
Kit - ML2 - SS8122 SB - Memory - 1.688D - Kalrez 90D / PEEK - Sour 10031848
SRO/Telemetry Tool Power Adapter - 1.375 OD 10005851
The Cablehead Tension tool provides feedback to let the user Specifications
know how much tension is being pulled at the cable head, Outer Diameter 1.688"
aiding in accidental pullout prevention and also allowing the Weight 10.1 lbs
user to know how much tension can actually be pulled in Pressure Rating 15 K psi
deep wells without damaging a tool string. Temperature Rating 177 C
Material Inconel 718
• Compatible with the Spartek SRO Logging Systems
Operating Voltage 7 – 17 V DC
• Electronic identification of serial-number and tool type
• Measures tension and compression force Operating Current1 24.2 mA
• Internal temperature sensor for force compensation. Tension / Compression
Sensor Type Strain
Resolution +/-2.0 lbf
Accuracy 200 lbf
Range -20K to 20K lbf
Accessories
Item Description Item Number
Kit - ML1 - PL - 1.688D - Aflas 90D/ PEEK 10028081
Kit - ML1 - PL - 1.688D - Chemraz 90D/ PEEK - Sour 10027025
Kit - ML1 - PL - 1.688D - Viton 90D / PEEK 10028082
Accessories
Item Description Item Number
Kit - ML1 - PL - 1.688D - Aflas 90D/ PEEK 10028081
Kit - ML1 - PL - 1.688D - Chemraz 90D/ PEEK - Sour 10027025
Kit - ML1 - PL - 1.688D - Viton 90D / PEEK 10028082
Kit - ML2 - SS8211 SA - GR/CCL - 1.688D - Chemraz 90D/ PEEK - Sour 10027684
PL – Gamma Ray Calibration Fixture 10013605
PL - Manual - ML1+ML2 SS8211 SA 1.688D Gamma CCL 10027598
The Casing Collar Locator or CCL tool is run as a part of the Specifications
depth correlation section of the Production Logging Tools. Outer Diameter 1.688"
• Compatible with Spartek SRO and Memory Logging Weight 11.41
system Pressure Rating 15 K psi
• Electronic identification of serial number and tool type Temperature Rating 177 C
Material Inconel 718
Operating Voltage 7 – 17 V DC
Operating Current1 10 – 11 mA
Casing Collar Locator (CCL)
Sensor Type2 Coil / Magnets
Gain Amplifier Adjustable
Accessories
Item Description Item Number
Kit - ML1 - PL - 1.688D - Aflas 90D/ PEEK 10028081
Accessories
Item Description Item Number
Kit - ML1 - PL - 1.688D - Aflas 90D/ PEEK 10028081
Accessories
Item Description Item Number
Kit - ML1 - PL - 1.688D - Aflas 90D/ PEEK 10028081
Accessories
Item Description Item Number
Kit - ML1 - PL - 1.688D - Aflas 90D/ PEEK 10028081
Kit - ML1 - PL - 1.688D - Chemraz 90D/ PEEK - Sour 10027025
Kit - ML1 - PL - 1.688D - Viton 90D / PEEK 10028082
Kit - ML2 - SS8330 SA - TP - 1.688D - Chemraz 90D/ PEEK - Sour 10028359
PL - 1.688D - PT Tool - Transducer - Field Pressure Test Plug 10027978
PL - Manual - ML1+ML2 SS8330 SA 1.688D Sapphire TP Tool 10028319
Accessories
Item Description Item Number
Kit - ML1 - PL - 1.688D - Aflas 90D/ PEEK 10028081
Accessories
Item Description Item Number
PL - Centalizer Spring - 1.688" Slip Over Centralizer 10030028
PL - Manual - ML1+ML2 SS8705 SA Slip Over Centralizer 10030674
PL - Shipping PVC - 1.688" Slip Over Centralizer 10030210
PL - Spring Cover - 1.688" Slip Over Centralizer 10030209
PL - Spring Sub - 1.688" Slip Over Centralizer 10030208
PL - Stop Collar - 1.688" Slip Over Centralizer 10028570
Screw - 1/4"-20 UNC - Hex Socket Set Screw - Steel-Black 10005581
Screw - 3/8"-16 UNC - Hex Socket Set Screw - Cup Point - Stainless Steel 10028572
Accessories
Item Description Item Number
Kit - ML1 - PL - Field Joint - 1.375D Aflas 90D / PEEK - Sour 10018336
Kit - ML1 - PL - Field Joint - 1.375D - Chemraz 90D / PEEK - Sour 10015753
Kit - ML1 - PL - Field Joint - 1.375D - Viton 90D / PEEK - Sweet 10015752
Kit - ML1 - SS8716 - E-Line Centralizer 177°C - 1.688D - Aflas 90D 10030050
Kit - ML1 - SS8716 - E-Line Centralizer 177°C - 1.688D - Chemraz 90D 10030049
Kit - ML2 - SS8716 - E-Line Centralizer - 177°C - 1.688D - Chemraz 90D / PEEK - Sour 10030048
PL - Manual - ML1+ML2 SS8716 SA/D PL E-Line Centralizer 10028937
1Maximum values include a 20% safety factor. Minimum values include a 50% safety factor (recommended).
www.sparteksystems.com 11 Aug 2022 Cased Hole Logging Catalog
92
1.688” Production Logging Tools
Accessories
Item Description Item Number
Kit - ML1 - PL - 1.688D - Aflas 90D/ PEEK 10028081
Kit - ML2 - SS8720 SA - In-Line Centralizer - 1.688D - Chemraz 90D/ PEEK - Sour 10028094
Accessories
Item Description Item Number
Grease - Metalon High-Tech EP 1.5 - 400 gm Tube 10027207
Grease Fitting with Ball Check - .25"-28 Straight Steel Zinc 10027338
Grease Gun - HD Lincoln 10028607
Kit - ML1 - PL - 1.688D - Aflas 90D/ PEEK 10028081
Kit - ML1 - PL - 1.688D - Chemraz 90D/ PEEK - Sour 10027025
Kit - ML1 - PL - 1.688D - Viton 90D / PEEK 10028082
Accessories
Item Description Item Number
Kit - ML1 - PL - 1.688D - Aflas 90D/ PEEK 10028081
Kit - ML2 - SS8011SA - Multi Sensor Array - 2.125" - Kalrez 90D - Sour 10031810
Accessories
Accessories
PL - 1.688" - Battery Housing - 4 x "D" - 0.938" 10 UN Pin - Sucker Rod - Sour 17.62” 10026036
PL - 1.688" - Battery Housing - 4 x "DD" - 0.938" 10 UN Pin - Sucker Rod - Sour 28.12” 10026037
Battery housing options for use with the Memory Production Specifications
Logging Tool (MPLT) or the Compact Memory Production Outer Diameter 1.688”
Logging Tool (CPLT). Pressure Rating 15 K psi
Temperature Rating 177 °C
Material Inconel 718
Pin Thread 0.938”-10 UN Pin
Sucker Rod
Tensile Strength 64 K lbs
Battery Packs
Item Description Item Number
PL - Battery Pack - 4 x "D" - 10.0 Ah - 14.6V - 165°C - Non-Locking - 11 Pin 10026042
PL - Battery Pack - 4 x "DD" - 18.0Ah - 14.6V - 165°C - Non Locking - 11 Pin 10026043
Lithium Battery Packs for use with the Memory Production Capacity (Ah)1 Run Time (hours)2
Logging Tool (MPLT) 10.0 50
18.0 90
• Locking 11-pin connector
• Unique serial number on each pack
1
Battery pack capacity values (Amp hours) are based on worst case conditions.
2Estimated run time is based on a typical PLT tool string configuration drawing approximately 200 mA.
-Typical PLT string: MEM + CENT + GR/CCL + TP + CAP + ADT + ILS + CENT + FBS
www.sparteksystems.com 11 Aug 2022 Cased Hole Logging Catalog
96
1.688” Production Logging Tools
Accessories
Accessories
Item Description Item Number
Kit - ML1 - PL - Crossover 1.688D to 1.375D - Chemraz 90D / PEEK - Sour 10028598
Bullnose
Item Description ML Item Number
Bullnose - 1.375D - GO Box - 15000 psi - Sour 4.00” 10027570
PL - Bullnose - 1.688D Tool String - 15000 psi - Sour 2.62” 10025247
The Bullnose provides a pressure seal for the bottom of the Specifications
tool. Outer Diameter 1.688"
Makeup Length (ML) 2.62"
• Compatible with all Spartek 1.688" PL tools Weight 7.9 lbs
Pressure Rating 20 K psi
Temperature Rating 300 C
Material Inconel 718
Accessories
Item Description Item Number
Kit - Redress - PL - HTHP - 1.688D Field Joint - Kalrez - Sour 10028540
Accessories
Miscellaneous Tools
Item Description Item Number
O-Ring Removal Tool - Plastic 10010354
Wrench - Open End - 1.50" - 0.34 Wide 10028573
Wrench - Thin Pattern Pump - 1-1/2" 10016665
Accessories
Shipping Case
Item Description Item Number
Case - Transport - PL - 1.688D - 4 x 48.5" Slot 10026789
The thread protectors are used to protect those tools that Specifications
have a GO tool box or pin threads. Outer Diameter 1.88"
Length 2.50”
• Compatible with 1.688" OD GO tools
Weight 0.25 lbs
• Protects threads and O-rings during transportation
Material PVC
• Prevents moisture entering tool connectors while
washing tools
The thread protectors are used to protect the tool box and Specifications
pin threads of each individual sonde in the Production Outer Diameter 1.88"
Logging Tool. Length 1.50" / 1.10”
Weight 0.35 lbs
• Compatible with all Spartek or 1.688" OD PL Tools
Material PVC
• Protects threads and O-rings during transportation
• Prevents moisture entering tool connectors while
washing tools
Accessories
This page is intentionally blank.
Accessories
SS8186 SA - HTHP - Memory Controller Sapphire PTS - 350°C - 20,000 psi - 1.688D - Sour 10028459
Accessories
Item Description Item Number
Quartz/Sapphire - Battery Pack - 2 x "AA" - 1.4Ah - 7.8V - 150°C - Non-Locking - 7 Pin 10002068
Kit - ML1 - SS8186 SA HTHP Memory Controller Sapphire PTS - 1.688D - Kalrez 90D - sour 10030329
Kit - ML1 - SS8186 SA HTHP Memory Controller Sapphire PTS - 1.688D - Viton 90D 10030330
PL - Manual - ML1+ML2 SS8186 SA HTHP Flasked Memory Only Sapphire PTS 10030291
Accessories
Item Description Item Number
Case - Transport - 1.688D - 2 x 90.0" Slot 10029170
Kit - ML2 - SS8180 SA/B HTHP Telemetry - 1.688D - Kalrez - Sour 10025638
Kit - ML2 - SS8180 SA/B HTHP Telemetry - 1.688D - Viton 90D 10029078
1 For 6 hours.
2
Between 25 C and 177 C.
3 Maximum values include a 20% safety factor. Minimum values include a 50% safety factor (recommended).
4 Single axis in-line with tool body.
Accessories
Item Description Item Number
Case - Transport - 1.688D - 2 x 56.0" Slot 10028216
Kit - ML1 - SS8185 SA/B/D HTHP Memory - 1.688D - Kalrez - Sour 10025640
Kit - ML1 - SS8185 SA/B/D HTHP Memory - 1.688D - Viton 90D 10029079
1 For 6 hours.
2 Between 25 C and 177 C.
3 Single axis in-line with tool body.
Accessories
Item Description Item Number
Case - Transport - 1.688D - 2 x 90.0" Slot 10029170
The SS8080 Sensor tool is part of the HTHP PLT tool string. It Specifications
has a Quartz pressure sensor for pressure measurement and Outer Diameter 1.688"
a RTD for fast response temperature measurement and a Weight 35.7 lbs
GR/CCL for depth correlation. Pressure Rating 20 K psi
Temperature Rating 350 C
• Compatible with Spartek SRO and memory logging
Material Inconel 718
systems
Operating Voltage 7 – 17 V DC
• Electronic identification of serial number and tool type
Operating Current1 15 – 20 mA
• 10-pin field Joint at top and bottom
Tension2 (min/max) 35 K / 56 K lbs
• Internal temperature channel
Casing Collar Sensor (CCL)
• 6 Hours run time at 300 C
Sensor Type Coil / Magnets
• Metal to metal seals
Gain Amplifier Adjustable
• Supports HTHP continuous or folding flowmeter attached
Gamma Ray Sensor (GR)
directly to sensor section.
Sensor Type (1x6) Scintillation Crystal
Range 0 – 10, 000 API
Sensitivity > 1.1 counts / API
Temperature Sensors (TPI/TPE)
Type Fast Response RTD
Accuracy ±1 C
Resolution < 0.005 C
Pressure Sensor (PRS)
Type Quartz Crystal
Range 0 – 20 K psi
Accuracy ±3.0 psi
Resolution 0.008 psi
Accessories
Item Description Item Number
Case - Transport - 1.688D - 2 x 90.0" Slot 10029170
Kit - ML1 - SS8080 SA/B/D HTHP Sensor - 1.688D - Field Joint - Kalrez - Sour 10029912
Kit - ML1 - SS8080 SA/B/D HTHP Sensor - 1.688D - Field Joint - Viton 90D 10029913
Kit - ML2 - SS8080 SA/B/D HTHP Sensor - 1.688D - Field Joint & Internal - Kalrez - Sour 10025639
Kit - ML2 - SS8080 SA/B/D HTHP Sensor - 1.688D - Field Joint & Internal - Viton 90D 10029077
Accessories
Item Description Item Number
Case - Transport - 1.688D - 2 x 90.0" Slot 10029170
Kit - ML1 - SS8580 SA/B/C HTHP - Fluid-ID - 1.688D - Kalrez - Sour 10028556
Kit - ML1 - SS8580 SA/B/C HTHP - Fluid-ID - 1.688D - Viton 90D 10029225
Kit - ML2 - SS8580 SA/B/C HTHP - Fluid ID - 1.688D - Field Joint and Internal - Kalrez - Sour 10029914
Kit - ML2 - SS8580 SA/B/C HTHP - Fluid ID - 1.688D - Field Joint and Internal - Viton 90D 10029915
1Maximum values include a 20% safety factor. Minimum values include a 50% safety factor (recommended).
www.sparteksystems.com 11 Aug 2022 Cased Hole Logging Catalog
107
1.688” HTHP Production Logging Tools
Accessories
Item Description Item Number
PL - Centalizer Spring - 1.688" Slip Over Centralizer 10030028
PL - Manual - ML1+ML2 SS8705 SA Slip Over Centralizer 10030674
PL - Shipping PVC - 1.688" Slip Over Centralizer 10030210
PL - Spring Cover - 1.688" Slip Over Centralizer 10030209
PL - Spring Sub - 1.688" Slip Over Centralizer 10030208
PL - Stop Collar - 1.688" Slip Over Centralizer 10028570
Screw - 1/4"-20 UNC - Hex Socket Set Screw - Steel-Black 10005581
Screw - 3/8"-16 UNC - Hex Socket Set Screw - Cup Point - Stainless Steel 10028572
Accessories
Item Description Item Number
Kit - ML1 - PL - Field Joint - 1.375D Aflas 90D / PEEK - Sour 10018336
Kit - ML1 - PL - Field Joint - 1.375D - Chemraz 90D / PEEK - Sour 10015753
Kit - ML1 - PL - Field Joint - 1.375D - Viton 90D / PEEK - Sweet 10015752
Kit - ML1 - SS8716 HTHP E-Line Centralizer - 1.688D - Kalrez - Sour 10029918
Kit - ML1 - SS8716 HTHP E-Line Centralizer - 1.688D - Viton 90D 10029917
Kit - ML2 - SS8716 HTHP E-Line Centralizer - 1.688D - Kalrez - Sour 10029920
Kit - ML2 - SS8716 HTHP E-Line Centralizer - 1.688D - Viton 90D 10029919
PL - Manual - ML1+ML2 SS8716 SA/D PL E-Line Centralizer 10028937
1Maximum values include a 20% safety factor. Minimum values include a 50% safety factor (recommended).
www.sparteksystems.com 11 Aug 2022 Cased Hole Logging Catalog
109
1.688” HTHP Production Logging Tools
Accessories
Item Description Item Number
Case - Transport - PL - 1.688D - 4 x 48.5" Slot 10026789
Kit - ML1 - SS8782 SA/D HTHP In-Line Centralizer - 1.688D - Kalrez - Sour 10029922
Kit - ML1 - SS8782 SA/D HTHP In-Line Centralizer - 1.688D - Viton 90D 10029921
Kit - ML2 - SS8782 SA/D HTHP In-Line Centralizer - 1.688D - Kalrez - Sour 10029924
Kit - ML2 - SS8782 SA/D HTHP In-Line Centralizer - 1.688D - Viton 90D 10029923
PL - Redress Kit - HTHP/177C - 1.688D - E/In-Line Centralizer - 4 Rollers .525"D & Axles - Misc Pins 10029905
1Maximum values include a 20% safety factor. Minimum values include a 50% safety factor (recommended).
www.sparteksystems.com 11 Aug 2022 Cased Hole Logging Catalog
110
1.688” HTHP Production Logging Tools
Accessories
Item Description Item Number
Kit - Redress - PL - HTHP - 1.688D Field Joint - Kalrez - Sour 10028540
1Maximum values include a 20% safety factor. Minimum values include a 50% safety factor (recommended).
www.sparteksystems.com 11 Aug 2022 Cased Hole Logging Catalog
111
1.688” HTHP Production Logging Tools
SS8484 SA - HTHP - Flowmeter - Continuous - 350°C - 20000 psi - 1.688D - Sour 10033727
Accessories
Item Description Item Number
Ball Bearing 1 x - Ceramic - Not Sealed - (Thin Bearing) 10030553
PL - SS8431SA/8484SA - 1.688" CFM - 6 Blade Impeller - 1.27"OD - 0.4"W - 4.0 ins/rev - Titanium 10033659
SS8431 & SS8484 - Nozzle Flowmeter - Ring Jewel Bearing Kit 10032271
SS8431 & SS8484 - Nozzle Flowmeter - Vee Jewel Bearing Kit 10032270
.
2Maximum values include a 20% safety factor. Minimum values include a 50% safety factor (recommended).
3Sensor threshold measured in fluid flow.
www.sparteksystems.com 11 Aug 2022 Cased Hole Logging Catalog
112
1.688” HTHP Production Logging Tools
SS8484 SB - HTHP - Flowmeter - Continuous - 350°C - 20000 psi - 2.125D - Sour 10033728
Accessories
Item Description Item Number
Ball Bearing 1 x - Ceramic - Not Sealed - (Thin Bearing) 10030553
PL - SS8431SB/8484SB - 2.125" CFM - 6 Blade Impeller - 1.70"OD - 0.4"W - 4.0 ins/rev - Titanium 10033709
SS8431 & SS8484 - Nozzle Flowmeter - Ring Jewel Bearing Kit 10032271
SS8431 & SS8484 - Nozzle Flowmeter - Vee Jewel Bearing Kit 10032270
.
2Maximum values include a 20% safety factor. Minimum values include a 50% safety factor (recommended).
3Sensor threshold measured in fluid flow.
www.sparteksystems.com 11 Aug 2022 Cased Hole Logging Catalog
113
1.688” HTHP Production Logging Tools
SS8484 SC - HTHP - Flowmeter - Continuous - 350°C - 20000 psi - 2.875D - Sour 10033729
Accessories
Item Description Item Number
Ball Bearing 1 x - Ceramic - Not Sealed - (Thin Bearing) 10030553
PL - SS8431SC/8484SC - 2.875" CFM - 6 Blade Impeller - 2.25"OD - 0.4"W - 4.0 ins/rev - Titanium 10033710
SS8431 & SS8484 - Nozzle Flowmeter - Ring Jewel Bearing Kit 10032271
SS8431 & SS8484 - Nozzle Flowmeter - Vee Jewel Bearing Kit 10032270
.
2Maximum values include a 20% safety factor. Minimum values include a 50% safety factor (recommended).
3Sensor threshold measured in fluid flow.
www.sparteksystems.com 11 Aug 2022 Cased Hole Logging Catalog
114
1.688” HTHP Production Logging Tools
The 3 arm Roller Full-bore Folding Flow Meter is one of the Specifications
available options in the flow measurement section of the Outer Diameter 1.688”
HTHP Production Logging Tool. Weight 7.0 lbs
Pressure Rating 20 K psi
• Compatible with the Spartek SRO and Memory Logging
Temperature Rating 350 C
Systems
Material Inconel 718
• Small, medium and basket diameter kits available
Operating Voltage 7 – 17 V DC
• Two sizes of rollers available
Operating Current1 2 mA
• Bow-spring conversion kit available
Min. Logging Diameter 2.25”
• Easily replaceable blades Functional Range 4.07 – 5.60”
• 10-pin connector field-joint Tension2 (min/max) Body - 32 K / 51 K lbs
• Spare-parts kit available Arms - 2.1 K / 3.4 K lbs
Compression1 (min/max) Arms - 500 / 800 lbs
Accessories
Item Description Item Number
Ball Bearing 10 x - Steel - Sealed (Thick Sealed) 10025577
Kit - Conversion - SS8489 SB HTHP - FBS - Medium Diameter (4.64" - 6.68") 10028976
Kit - Conversion - SS8489 SC HTHP - FBS - Large Diameter (6.34" - 8.22") 10028977
Kit - ML1 - SS8489 SA/B/C HTHP Fullbore Flow Meter - Combo FJ & Ceramic Bearings - Kalrez - Sour 10029953
Kit - ML1 - SS8489 SA/B/C HTHP Fullbore Flow Meter - Combo FJ & Steel Bearings - Viton 90D 10029952
Kit - ML2 - SS8489 SA/B/C HTHP Fullbore Flow Meter - 1.688D - Kalrez - Sour 10029965
Kit - ML2 - SS8489 SA/B/C HTHP Fullbore Flow Meter - 1.688D - Viton 90D 10029964
Kit - Redress - PL - HTHP - Flow Meter Bearing Kit- 2 x Ceramic Bearings (Thick) / C-clip 10029911
Kit - Redress - PL - HTHP - Flow Meter Bearing Kit- 2 x Non-Sealed Steel Bearings (Thin) / C-clip 10029909
Kit - Redress - PL - HTHP - Flow Meter Bearing Kit- 2 x Sealed Steel Bearings (Thick) / C-clip 10029910
PL - Manual - ML1+ML2 SS8489 SA/SB/SC - HTHP - Fullbore Roller Flow Meter 10030052
1
Between 25° C and 177° C.
2 Maximum values include a 20% safety factor. Minimum values include a 50% safety factor (recommended).
3 Sensor threshold measured in fluid flow.
The 3 arm Roller Full-bore Folding Flow Meter is one of the Specifications
available options in the flow measurement section of the Outer Diameter 1.688”
HTHP Production Logging Tool. Weight 7.0 lbs
Pressure Rating 20 K psi
• Compatible with the Spartek SRO and Memory Logging
Temperature Rating 350 C
Systems
Material Inconel 718
• Small, medium and basket diameter kits available
Operating Voltage 7 – 17 V DC
• Two sizes of rollers available
Operating Current1 2 mA
• Bow-spring conversion kit available
Min. Logging Diameter 2.25”
• Easily replaceable blades Functional Range 4.70 – 6.70”
• 10-pin connector field-joint Tension2 (min/max) Body - 32 K / 51 K lbs
• Spare-parts kit available Arms - 2.1 K / 3.4 K lbs
Compression1 (min/max) Arms - 500 / 800 lbs
Flow Meter Sensor (FLW)
Impellor 4-Blade Titanium
Size 3.175" dia. x 0.205" L
Pitch 5.0 rev / ft
Magnetic Detection 6 pulses / rev
Range ±200 rev / sec
Bearing Type Non-Sealed (x2)
Sensitivity3 2 ft / min
Accessories
Item Description Item Number
Ball Bearing 10 x - Steel - Sealed (Thick Sealed) 10025577
Kit - Conversion - SS8489 SC HTHP - FBS - Large Diameter (6.34" - 8.22") 10028977
Kit - Conversion - SS8489 SC HTHP - FBS - Small Diameter (3.90" - 5.60") 10028975
Kit - ML1 - SS8489 SA/B/C HTHP Fullbore Flow Meter - Combo FJ & Ceramic Bearings - Kalrez - Sour 10029953
Kit - ML1 - SS8489 SA/B/C HTHP Fullbore Flow Meter - Combo FJ & Steel Bearings - Viton 90D 10029952
Kit - ML2 - SS8489 SA/B/C HTHP Fullbore Flow Meter - 1.688D - Kalrez - Sour 10029965
Kit - ML2 - SS8489 SA/B/C HTHP Fullbore Flow Meter - 1.688D - Viton 90D 10029964
Kit - Redress - PL - HTHP - Flow Meter Bearing Kit- 2 x Ceramic Bearings (Thick) / C-clip 10029911
Kit - Redress - PL - HTHP - Flow Meter Bearing Kit- 2 x Non-Sealed Steel Bearings (Thin) / C-clip 10029909
Kit - Redress - PL - HTHP - Flow Meter Bearing Kit- 2 x Sealed Steel Bearings (Thick) / C-clip 10029910
PL - Manual - ML1+ML2 SS8489 SA/SB/SC - HTHP - Fullbore Roller Flow Meter 10030052
1
Between 25° C and 177° C.
2 Maximum values include a 20% safety factor. Minimum values include a 50% safety factor (recommended).
3 Sensor threshold measured in fluid flow.
The 3 arm Roller Full-bore Folding Flow Meter is one of the Specifications
available options in the flow measurement section of the Outer Diameter 1.688”
HTHP Production Logging Tool. Weight 7.0 lbs
Pressure Rating 20 K psi
• Compatible with the Spartek SRO and Memory Logging
Temperature Rating 350 C
Systems
Material Inconel 718
• Small, medium and basket diameter kits available
Operating Voltage 7 – 17 V DC
• Two sizes of rollers available
Operating Current1 2 mA
• Bow-spring conversion kit available
Min. Logging Diameter 2.25”
• Easily replaceable blades Functional Range 6.34 – 8.22”
• 10-pin connector field-joint Tension2 (min/max) Body - 32 K / 51 K lbs
• Spare-parts kit available Arms - 2.1 K / 3.4 K lbs
Compression1 (min/max) Arms - 500 / 800 lbs
Flow Meter Sensor (FLW)
Impellor 4-Blade Titanium
Size 4.40" dia. x 0.205" L
Pitch 3.871 rev / ft
Magnetic Detection 6 pulses / rev
Range ±200 rev / sec
Bearing Type Non-Sealed (x2)
Sensitivity3 2 ft / min
Accessories
Item Description Item Number
Ball Bearing 10 x - Steel - Sealed (Thick Sealed) 10025577
Kit - Conversion - SS8489 SB HTHP - FBS - Medium Diameter (4.64" - 6.68") 10028976
Kit - Conversion - SS8489 SC HTHP - FBS - Small Diameter (3.90" - 5.60") 10028975
Kit - ML1 - SS8489 SA/B/C HTHP Fullbore Flow Meter - Combo FJ & Ceramic Bearings - Kalrez - Sour 10029953
Kit - ML1 - SS8489 SA/B/C HTHP Fullbore Flow Meter - Combo FJ & Steel Bearings - Viton 90D 10029952
Kit - ML2 - SS8489 SA/B/C HTHP Fullbore Flow Meter - 1.688D - Kalrez - Sour 10029965
Kit - ML2 - SS8489 SA/B/C HTHP Fullbore Flow Meter - 1.688D - Viton 90D 10029964
Kit - Redress - PL - HTHP - Flow Meter Bearing Kit- 2 x Ceramic Bearings (Thick) / C-clip 10029911
Kit - Redress - PL - HTHP - Flow Meter Bearing Kit- 2 x Non-Sealed Steel Bearings (Thin) / C-clip 10029909
Kit - Redress - PL - HTHP - Flow Meter Bearing Kit- 2 x Sealed Steel Bearings (Thick) / C-clip 10029910
PL - Manual - ML1+ML2 SS8489 SA/SB/SC - HTHP - Fullbore Roller Flow Meter 10030052
1
Between 25° C and 177° C.
2 Maximum values include a 20% safety factor. Minimum values include a 50% safety factor (recommended).
3 Sensor threshold measured in fluid flow.
The 3 arm Bow Spring Full-bore Folding Flow Meter is one of Specifications
the available options in the flow measurement section of the Outer Diameter 1.688"
HTHP Production Logging Tool. Weight 7.0 lbs
Pressure Rating 20 K psi
• Compatible with the Spartek SRO and Memory Logging
Temperature Rating 350 C
Systems
Material Inconel 718
• Small, medium and basket diameter kits available
Operating Voltage 7 – 17 V DC
• Roller conversion kit available
Operating Current1 2 mA
• Easily replaceable blades
Min. Logging Diameter 2.25"
• 10-pin connector field-joint Tension2 (min/max) Body - 32 K / 51 K lbs
• Spare-parts kit available Arms - 2.1 K / 3.4 K lbs
Compression1 (min/max) Arms - 500 / 800 lbs
Flow Meter Sensor (FLW)
Impellor 4-Blade Titanium
Size 2.47" dia. x 0.205" L
Pitch 6.0 rev / ft
Magnetic Detection 6 pulses / rev
Range ±200 rev / sec
Bearing Type Non-Sealed (x2)
Sensitivity3 2 ft / min
PRELIMINARY DATA
1
Between 25° C and 177° C.
2 Maximum values include a 20% safety factor. Minimum values include a 50% safety factor (recommended).
3 Sensor threshold measured in fluid flow.
Accessories
Accessories
Bullnose
Item Description ML Item Number
Bullnose - 1.688" OD - 15/16" 10 UNC - 316 SS 1.63” 10028369
The Bullnose provides a pressure seal for the bottom of the Specifications
tool. Outer Diameter 1.688"
Pressure Rating 20 K psi
• Compatible with all Spartek 1.688" HTHP PL tools Temperature Rating 350 C
Crossover
Item Description ML Item Number
HTHP - Crossover to 5/8" Sucker Rod Box - 1.688D - sour 2.62” 10029994
The Bullnose provides a pressure seal for the bottom of the Specifications
tool. Outer Diameter 1.688"
Pressure Rating 20 K psi
• Compatible with all Spartek 1.688" HTHP PL tools Temperature Rating 350 C
Accessories
Item Description Item Number
Kit - Redress - PL - HTHP - 1.688D Field Joint - Kalrez - Sour 10028540
Accessories
Accessories
Miscellaneous Tools
Item Description Item Number
HTHP - Hand Tools - Kit 10029973
1 x 10004046 Tool - Wood Handled Wire Brush
1 x 10004842 Wrench - Spanner - 1-1/4" to 3" - 3/16" Pin
1 x 10005387 Tool - Punch - 3/32" Pin
1 x 10005612 Tape - 3/4" - Kapton
5 x 10009071 Tool Stand - 2.31" H - PVC
2 x 10010354 O-Ring Removal Tool - Plastic
1 x 10010560 Wrench - Combination - 1/2"
1 x 10010726 Wrench - Torque - 50-250 ft-lbs - 0.5" Drive
2 x 10012207 Wrench - Combination - 1-1/2"
1 x 10012429 Wrench - Torque - Crowfoot - 1-1/2" - 0.50" Drive
1 x 10017038 Nozzle Flow Meter - Disassembly Tool
2 x 10027338 Grease Fitting with Ball Check - .25"-28 Straight Steel Zinc
1 x 10028479 Hand Tool - Allen Wrench - Hex Key Set - 0.050"-3/8" - Ball Driver - 13 pc
1 x 10028605 Whip Hose - 1/8" NPT x 18"
1 x 10028607 Grease Gun - HD Lincoln
Shipping Cases
Item Description Item Number
Case - Transport - 1.688D - 2 x 56.0" Slot 10028216
Case - Transport - 1.688D - 2 x 90.0" Slot 10029170
Case - Transport - PL - 1.688D - 4 x 48.5" Slot 10026789
The thread protectors are used to protect those tools that Specifications
have a GO tool box or pin threads. Outer Diameter 1.88"
Length 2.50”
• Compatible with 1.688" OD GO tools
Weight 0.25 lbs
• Protects threads and O-rings during transportation
Material PVC
• Prevents moisture entering tool connectors while
washing tools
Accessories
The thread protectors are used to protect the tool box and Specifications
pin threads of each individual sonde in the Production Outer Diameter 1.88"
Logging Tool. Length 1.50" / 1.10”
Weight 0.35 lbs
• Compatible with all Spartek or 1.688" OD PL Tools
Material PVC
• Protects threads and O-rings during transportation
• Prevents moisture entering tool connectors while
washing tools
Accessories
Item Description Item Number
O-Ring - 2-117 - Viton 90D 10004105
Warranty
1–Year Limited Warran ty
Spartek Systems warrants that all its Products are free of any known defects in materials and workmanship, have been calibrated, and tested to work as intended.
In the event the Product fails during twelve months from date of shipment, and said Product has not been abused as determined by Seller’s Agent, the defective
Product will be repaired (or replaced at Spartek Systems discretion) at no charge.
If abuse is determined to be the cause of failure, the Customer will be notified and repair charges will be applicable.
Product items that are expendable in normal use are not covered by this warranty (i.e. battery packs, rollers, axles, bearings arms, etc.)
Seller warrants the repair or replacement of the Product for the balance of the one (1) year warranty as stated above or ninety (90) days, whichever is longer.
Seller warrants the repair or replacement of the Product for ninety (90) days after shipment back to Customer.
For all the above-mentioned warranty terms, the warranty is valid only when recommended parts are used (i.e., parts listed in the parts list).