Professional Documents
Culture Documents
Ap170 6FGHJK
Ap170 6FGHJK
AKSA Power Generation has been producing industrial generator sets with an innovative compact design and
excellence in quality for over 30 years. AKSA has been providing reliable power through three main production plants and
over 15 branch offices worldwide.
General Characteristics
Control Panel Model DSE 6020 Base Frame / Enclosure AKSA AK50
Standby
Engine Alternator Voltage Standby Power Prime Power
Current
The Generator set is designed and manufactured in a facility certified to ISO9001 standards.
The Generator set is designed and manufactured in a facility certified to ISO14001:2015 standards.
AKSA Power Generation provides single source responsibility for the generator set & accessories.
The generator set, with its components, are prototype tested and production tested
*Manufacturer reserves the right to make changes in model, technical specifications, color, equipment and accessories without prior notice.
AP170-6
Aspiration Turbocharged
Fan Number of Plates/Material 7 / Nylon
Compression Ratio 18.2 : 1
Total System Capacity 21 L
Bore / Stroke 105 mm / 135 mm
Max Top Tank Temperature 110 ˚C
Break Mean Effective Pressure 1477.9 kPa
Thermostat Range 82 – 93 ˚C
Engine Coolant Flow 170 l/min
Fuel Injection Pump DP310 Oil Pressure – relief valve opens 460 kPa
Oil Consumption at full load as a
0.1 %
% of fuel consumption
Priming Pump Type Manual
*Manufacturer reserves the right to make changes in model, technical specifications, color, equipment and accessories without prior notice.
AP170-6
A.V.R. AS440
Controller Features & Benefits
Voltage Regulation ±1%
Microprocessor controlled
Insulation System Class H
Event log
Winding Pitch Two Thirds
Test feature
Manufacturer AKSA
Hours counter
Input Voltage 1 ph, Based on gen voltage
Comprehensive warning or shutdown on fault condition
Power 1000W
*Manufacturer reserves the right to make changes in model, technical specifications, color, equipment and accessories without prior notice.
AP170-6
Enclosure Features
✓ E-Stop on Enclosure
Length 2300 mm
Width 1150 mm
Height 1466 mm
Length 3402 mm
Width 1160 mm
Height 1938 mm
*Manufacturer reserves the right to make changes in model, technical specifications, color, equipment and accessories without prior notice.
AP170-6
✓ Battery and Battery Rack ❑ Fuel Level Display & Alarm on Controller
✓ Anti Vibration Pads between Engine/Alternator & Base Frame ❑ Auto Fuel Fill Control System
✓ Industrial Grade Silencer Set for Open Skid Sets ❑ Manual Speed Adjust Rheostat
✓ 24 Months / 2000 hours Limited Standby Warranty ❑ Automatic Transfer Panel (ATS) – Changeover Design
*Manufacturer reserves the right to make changes in model, technical specifications, color, equipment and accessories without prior notice.
SEDE PRINCIPAL:
Av. Nicolás Ayllón N° 2241 – Ate – Lima – Perú
Telf.: (51-1) 748-3333 / 326-0411 / Anexo 1152