Professional Documents
Culture Documents
Re29743 03 - 2010 07
Re29743 03 - 2010 07
10
Replaces: 05.10
1/4
Type VT 11021-1X/V002
Component series 1X
H6507_d
Ordering code
Type VT 11021-1X/V002
Functional description
The amplifier module is to be snapped onto a hat rails ac- trimming potentiometers Gw, Zw and GD:
cording to EN 60715. It is electrically connected by means of – The max. output current between approx. 10 and 110 % by
screw terminals. The module is powered by 24V DC voltage. means of “Gw“
The ±50 mA command value is applied to the differential in- – The offset current between +10 % and –10 % of the max.
put. The output current of the downstream U/I transformer output current by means of “Zw”
controls the servo-valve.
– The amplitude of the dither signals between 0 and 10 % of
The following parameters can be adjusted externally using the maximum output current by means of “GD“
+ –
w I Servo-valve
Zw
Differential input: 2 3 5 I
6 4 A
Icomm: ±50 mA U I A B
3 ∑ U
B
Reference potential I
Gw 5 D
P T
C
≈
= GD
Icomm: 0 to +50 mA → I: 0 to +60 mA
4
3 4 Icomm: 0 to –50 mA → I: 0 to –60 mA
1
1
Operating + UB DC + UM
+ M0
voltage 2
0V DC – UM
Technical data (for applications outside these parameters, please consult us!)
Terminal assignment
Servo-
+UO 1 4 Connection A, B
Operating valve
voltage Servo- Connection C, D
0V 2 5
valve
Reference
3 6 ±Icomm
potential
Unit dimensions
Gw
Zw LED indicator lamp:
GD green → internal supply voltage
w I
Measuring sockets:
w → current command value (10 V ≙ 100 %)
1 2 3
I → actual current value (10 mV ≙ 1 mA)
85,5 25 ⊥ → measuring zero
– The amplifier module may only be wired when disconnected from the power supply!
– The distance to radio equipment must be sufficiently large (>> 1m)!
– Shield command value cables; do not lay them near power cables!
– Do not use free-wheeling diodes in the solenoid cables!
– In the case of a strong fluctuations in the operating voltage, it may become necessary to install an external smoothing capaci-
tor having a capacitance of at least 2200 µF.
Recommendation: Capacitor module VT 11110 (see RE 30750); sufficient for up to 3 amplifier modules
Bosch Rexroth AG © This document, as well as the data, specifications and other informa-
Hydraulics tion set forth in it, are the exclusive property of Bosch Rexroth AG. It
Zum Eisengießer 1 may not be reproduced or given to third parties without its consent.
97816 Lohr am Main, Germany The data specified above only serve to describe the product. No state-
Phone +49 (0) 93 52 / 18-0 ments concerning a certain condition or suitability for a certain applica-
Fax +49 (0) 93 52 / 18-23 58 tion can be derived from our information. The information given does
documentation@boschrexroth.de not release the user from the obligation of own judgment and verifica-
www.boschrexroth.de tion. It must be remembered that our products are subject to a natural
process of wear and aging.