The document is a machine speed audit report from December 6, 2016 that compares the standard programmed speeds of various machines to their actual speeds. It finds that machine H3 was running at 30% below its programmed speed, while machines B10 and B2TEL had actual speeds 38% and an error respectively below their programmed speeds, likely due to faults. Several other machines matched their programmed speeds within a 0% tolerance or had minor variations within 10%, operating as intended.
The document is a machine speed audit report from December 6, 2016 that compares the standard programmed speeds of various machines to their actual speeds. It finds that machine H3 was running at 30% below its programmed speed, while machines B10 and B2TEL had actual speeds 38% and an error respectively below their programmed speeds, likely due to faults. Several other machines matched their programmed speeds within a 0% tolerance or had minor variations within 10%, operating as intended.
The document is a machine speed audit report from December 6, 2016 that compares the standard programmed speeds of various machines to their actual speeds. It finds that machine H3 was running at 30% below its programmed speed, while machines B10 and B2TEL had actual speeds 38% and an error respectively below their programmed speeds, likely due to faults. Several other machines matched their programmed speeds within a 0% tolerance or had minor variations within 10%, operating as intended.