Professional Documents
Culture Documents
Schindler Villa Owner Manual 2023.03
Schindler Villa Owner Manual 2023.03
Owner Manual
Project Number Project Name Page Total
Schindler(China)
Elevator Co.,Ltd 1 16
Version Written Check Review Standard Review Audit Approve Published Date
29.10.2012 发布日期
A0 SW WANG 2023.03
Schindler Villa
Owner Manual
Owner Manual Version:A0 Page: 2 /16
目录
1. Overview ............................................................................................................................................................................3
1.1. Basic structure of elevator ...................................................................................................................................3
2. The use of home lift ......................................................................................................................................................... 3
2.1. Normal operation conditions of the elevator .................................................................................................... 3
2.2. Personal elevator use .......................................................................................................................................... 4
2.3. Operating conditions of elevators ...................................................................................................................... 4
2.4. Function Keys in Mechanical COP .................................................................................................................... 6
2.5. Function Keys in Touch COP ..............................................................................................................................7
2.6. Function Keys in Mechanical LOP .................................................................................................................... 8
2.7. Function Keys in Touch LOP .............................................................................................................................. 9
3. Elevator decoration materials cleaning and maintenance guide ........................................................................... 11
Owner Manual Version:A0 Page: 3 /16
1. Overview
Elevator is a kind of special equipment, serving a specific floor, moving along a rigid guide rail for vertical
transportation of permanent transportation equipment, can be used to carry passengers and goods.
Home elevators only serve families, rated speed is not greater than 0.4m/s, rated load is not greater than
400kg.
The elevator is composed of four parts: machine room (or pulley room, for elevator without machine room),
hoistway, car and landing station. The driving, hanging device, car, guide device, electric driving device, door
and safety devices are installed in the four spaces of vertical lifting transportation equipment.
device
1 The mechanical structure is composed of four parts: the traction system, the guiding system, the car
2 The electrical control system consists of electric drive, electric control, signal transmission and
3 The safety device is composed of three kinds of mechanical, electrical and electromechanical
integrated safety devices, such as overspeed protection system, anti-offside terminal limit protection system,
anti-fall shear door interlock protection system, anti-squat bottom overload protection system, anti-impact roof
upward overspeed protection system, braking system, ground zero protection system, emergency rescue
system, etc.
between the machine room or pulleys should be between +5-40℃, and the fluctuation range of the power
2 The elevator room and the machinery and equipment room should be dedicated, the machine and
equipment section or pulley room should be weatherproof, and the passageway door should be opened
outward;
3 According to the use of the elevator environment and the frequency of use, generally should be in
three to five years for a comprehensive disassembly, cleaning, inspection, processing; The user should
Owner Manual Version:A0 Page: 4 /16
determine the overhaul period according to the old and new degree and frequent use.
need upwards, press Up arrow button, waiting for the elevator at the gate of the elevator (when the car
Waiting outside lift, don't rely on the landing door, don't push or impact the landing door;
After entering the lift, gently press the target floor button to reach the floor;
Inside the car don't speak loudly, don't play, don't jump;
when the elevator arrive the destination floor and door open, please get in and out of the car quickly.
If you are trapped within the car, please use the alarm and communication devices in contact with the
1 The load of the car is not allowed to exceed the rated load. If there is an alarm sound, the last person
6 Alarm bell and internal communication device, should be often paid attention to, at any time to keep
Owner Manual Version:A0 Page: 5 /16
intact;
7 Before starting the elevator every day (when it is necessary to close the elevator), when the landing
door is opened, make sure that the car stops on this floor, and then enter the car, and then run up and down
the whole process several times, no abnormal and abnormal sound can be put into formal operation;
8 When the following faults occur in the use of the elevator, the elevator should be stopped immediately,
and timely inform the elevator maintenance personnel, and placed "elevator maintenance, suspension of use"
warning sign:
Landing and car door is not fully closed and elevator runtime;
Select in cop and lop, leveling,or floor indicator when sudden failure or failure;
9 When you need to close the elevator after using it, ensure that the door is completely closed before
leaving.
10 In the event of an emergency in the use of the elevator, it is necessary to inform the maintenance
personnel and disconnect the power supply so as to rescue the trapped personnel in time. It can be operated
only after professional maintenance personnel check, repair and confirm safety:
When the earthquake, the slight earthquake may cause guide shoe out guide rail; If it runs, it will
when there is a fire, to put the car in security floor, timely stop the elevator, do not use; After the fire,
When the elevator in water, it is necessary to disconnect the power supply in time, do not blindly
restore the power supply, please ask professional maintenance personnel to check and restore
11 When the elevator is out of service for a long time, disconnect the power supply and carefully check it
Details:
① Display
Display content: elevator running direction, floor
information, date, time, temperature, special elevator
status (Overload, Fire).
② Schindler Elevator LOGO.
③ Mic (Voice input hole).
④ Speaker (Voice output hole).
⑤ Emergency light: ON to light up the interior car in case of
③ blackout.
④
⑥ Function buttons of one-key call for help
⑤
Press to call the property center;
Function keys:
① Display
Display content: elevator running direction, floor
①
information, date, time, temperature, special elevator
status (Overload, Fire).
② Schindler Elevator LOGO.
③ Speaker(Mic(Voice output hole) and mic(Voice input
hole).
② ④ Function buttons of one key call for help
wireless version, user needs to use his own phone card (China
identical.
⑤ Floor button
⑥ Function button: Door opening and closing, alarm, fan
figure below:
① Function keys:
② Display
Display content: elevator running
② direction, floor information, date,
time, temperature, special elevator
status (Overload, Fire).
UP call button
④
Schindler Villa Elevator - Function Keys in Touch COP
Function keys:
①
① Schindler Elevator LOGO.
② Display
Display content: elevator running
direction, floor information, date,
time, temperature, special elevator
status (Overload, Fire).
② ③ UP call button
④
Owner Manual Version:A0 Page: 10 /16
down the button for 5s to cancel the call and enter the standby state; The red LED goes off and the blue
LED lights up
Note:
1. The panel of COP and LOP shall not be scratched and shall be kept intact;
2. Gently press the button when in use, do not force and knock;
Owner Manual Version:A0 Page: 11 /16
Before construction, the joint or the difficult part to tear after decoration should be torn off first.
You can scrape it with a blade at the corner, and then tear the small opening from the upper part
and pull vertically down along the small opening at a uniform speed. Avoid pull horizontally,
because it is easy to break, resulting in the degumming of the face cover.
Do not use a blade to scrape on the decorative surface to avoid leaving scratches on the
decorative surface that cannot be repaired.
If there is a fracture in the tearing process, it should be stopped immediately and re-opened from
the fracture, according to the above steps.
Other decorative surfaces pasted with protective film (such as: coating surface, wood finish,
film surface, etc.)
Before construction, the protective film should be torn off at the joint and the difficult part after
decoration.
When tearing the protective film, it is strictly prohibited to scrape the protective film with a blade
to avoid damaging the decorative surface.
Before use or opening, when tearing the protective film inside the car and elevator landing door,
do not scratch randomly with the blade. First, find a point at the top of the part, and slowly tear the
protective film vertically. Remember!!
4 After the protective film is torn off, the wood veneer should be wiped with wet towel if there
are glue marks. If there are stubborn glue marks, 80% medical alcohol can be used to wipe.
Remember not to wipe with corrosive solution to avoid damaging the painted surface.
5 Stoving varnish decorative surface in principle with pure cotton cloth wipe, strictly
prohibited to use alcohol, thinner and chemical any potion treatment surface.
6 The dirt and glue marks on the stone surface should be wiped with a soft cloth or towel.
Solid glue marks can be removed by flat scraping with a blade. It is strictly prohibited to wipe
with corrosive solution, so as not to infiltrate or corrode the stone.
7 The glue mark on the glass surface should be wiped with a wet soft towel.Stubborn glue
marks can be scraped off with a blade and wiped again with a cotton soft towel.
8 When the marble floor of the elevator car is polished and polished, protection around the
car must be done to prevent dirt from splashing onto the decorative surface. At the same time,
in the mechanical polishing, do not touch any decorative surface.
9 Other construction parties must protect elevator door jamb, LOP on walls, arrival gong and
other elevator decoration products during elevator hall construction (such as ground polishing
and wall cleaning). To avoid polishing dirt or other corrosive liquid contamination of the
decorative surface. At the same time in the mechanical polishing, the machine should not touch
the decorative products or damage the decorative wall.
The most important thing for leather maintenance is to protect the leather surface, to prevent
the leather surface from being scratched by hard objects or sharp objects and from being
stained with oil. In case of oil stains, first use a dry towel to wipe the stain, then use leather
cleaning liquid to clean it up, and finally brush a layer of leather brightener, so that you can
achieve the effect of maintenance. In addition, due to the strong absorption of leather, usually
pay attention to anti-fouling. If the leather loses luster, can use leather polish polish, but do not
use shoe oil to wipe, because different leather products have different leather; Choose the most
suitable cleaning and maintenance oil. And before the formal use, to apply a small area of test
whether the product is suitable, so that you can do double insurance.
Precautions:
Owner Manual Version:A0 Page: 15 /16
(1) When cleaning, do not use sharp or rough materials to wipe the surface of the product,
especially mirror products, should use soft, not easy to drop lint to scrub;
(2) Drawing surface, should follow the grain to wipe, otherwise it will scratch the surface;
(3) Dust and dirt on the surface can be cleaned with flannel and water;
(4) For surface grease, oil, lubricating oil pollution and containing binder (glue), use flannel cloth
wipe with neutral detergent (with detergent, hand sanitizer);
(5) There are rainbow lines on the surface, which is caused by excessive use of detergent or oil.
When washing, neutral detergent can be washed away with warm water;
(6) It is forbidden to use washing liquid containing bleaching ingredients and abrasive agents,
steel wire balls, grinding tools, etc. In order to avoid residual washing liquid, corrosion of the
surface, the surface should be washed with clean water at the end of washing;
(7) Do not contact the products with strong acid and alkali chemicals, such as toilet detergent,
paint remover, metal cleaning agent, etc.
(8) If there are rainbow lines on the surface, which is caused by excessive use of detergent or oil.
When washing, neutral detergent can be washed away with warm water;
(9) It is forbidden to use washing liquid containing bleaching ingredients and abrasive agents,
steel wire balls, grinding tools, etc. In order to avoid residual washing liquid, corrosion of the
surface, the surface should be washed with clean water at the end of washing;
(10) Do not contact the products with strong acid and alkali chemicals, such as toilet detergent,
paint remover, metal cleaning agent, etc.
Precautions:
(1) During the assembly of elevator parts, pay attention to prevent metal objects such as
screwdrivers from scratching the plate surface;
(2) When cleaning oil, the cleaner should choose neutral ingredients, such as: with dish washing
liquid, hand sanitizer; Wipe with a soft cloth;
(3) Avoid using laundry detergent, soap, soap, Wham, alcohol, xylene, thinner, gasoline or other
Owner Manual Version:A0 Page: 16 /16
chemical solvents to remove stains;
(4) If there are stains on the surface, do not wipe forcefully, can be gently removed with water,
until the water volatilized in the original part coated with a little light wax, and then lightly wipe
(along the lines) a few times to form a protective film as far as possible to keep the board dry,
prevent water from leaving the surface for a long time, causing spots;
(5) Keep away from heat source, avoid direct sunlight, to prevent local cracking, deformation and
paint film local discoloration;
(6) Do not weld the connection in use, otherwise it will cause local discoloration;
(7) Please pay attention to the operation during daily cleaning and maintenance to avoid
unnecessary loss caused by product pollution or corrosion of paint.
Declaration
As the Company's products are updated, the contents may not be exactly the