2

You might also like

Download as txt, pdf, or txt
Download as txt, pdf, or txt
You are on page 1of 2

[ 1.

047055] thermal_sys: Registered thermal governor 'step_wise'


[ 1.064298] clocksource: Switched to clocksource arm_global_timer
[ 1.065649] NET: Registered PF_INET protocol family
[ 1.065858] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 1.066625] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144
bytes, linear)
[ 1.066685] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes,
linear)
[ 1.066707] TCP established hash table entries: 1024 (order: 0, 4096 bytes,
linear)
[ 1.066731] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 1.066760] TCP: Hash tables configured (established 1024 bind 1024)
[ 1.066910] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 1.066967] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 1.067285] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 1.067344] PCI: CLS 0 bytes, default 64
[ 1.070328] workingset: timestamp_bits=14 max_order=15 bucket_order=1
[ 1.074914] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.074946] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY)
(c) 2001-2006 Red Hat, Inc.
[ 1.077322] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.080054] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 1.082112] printk: console [ttyS0] disabled
[ 1.082207] 18000300.serial: ttyS0 at MMIO 0x18000300 (irq = 26, base_baud =
6250000) is a 16550
[ 1.565900] printk: console [ttyS0] enabled
[ 1.571972] bcm2835-rng 18004000.rng: hwrng registered
[ 2.074269] random: crng init done
[ 2.079852] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xf1
[ 2.086300] nand: AMD/Spansion S34ML01G2
[ 2.090204] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size:
64
[ 2.097784] iproc_nand 18028000.nand-controller: detected 128MiB total, 128KiB
blocks, 2KiB pages, 16B OOB, 8-bit, BCH-8
[ 2.108644] Scanning device for bad blocks
[ 4.032081] 3 bcm47xxpart partitions found on MTD device brcmnand.0
[ 4.038366] Creating 3 MTD partitions on "brcmnand.0":
[ 4.043491] 0x000000000000-0x000000080000 : "boot"
[ 4.049247] 0x000000080000-0x000000200000 : "nvram"
[ 4.056149] 0x000000200000-0x000008000000 : "firmware"
[ 4.063649] 2 trx partitions found on MTD device firmware
[ 4.069119] Creating 2 MTD partitions on "firmware":
[ 4.074070] 0x00000000001c-0x000000400000 : "linux"
[ 4.078956] mtd: partition "linux" doesn't start on an erase/write block
boundary -- force read-only
[ 4.089608] 0x000000400000-0x000007e00000 : "ubi"
[ 4.097866] bcm_iproc 18029200.spi: using bspi-mspi mode
[ 4.109676] iproc-mdio 18003000.mdio: Broadcom iProc MDIO bus registered
[ 4.117773] b53-srab-switch 18007000.ethernet-switch: found switch: BCM53011,
rev 5
[ 4.132274] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
[ 4.138687] bcma-host-soc 18000000.axi: bus0: Found chip with id 53010, rev 0x00
and package 0x02
[ 4.147661] bcma-host-soc 18000000.axi: bus0: Core 0 found: ChipCommon (manuf
0x4BF, id 0x800, rev 0x2A, class 0x0)
[ 4.158255] bcma-host-soc 18000000.axi: bus0: Core 1 found: Chipcommon B (manuf
0x4BF, id 0x50B, rev 0x01, class 0x0)
[ 4.169005] bcma-host-soc 18000000.axi: bus0: Core 2 found: DMA (manuf 0x4BF, id
0x502, rev 0x01, class 0x0)
[ 4.179008] bcma-host-soc 18000000.axi: bus0: Core 3 found: GBit MAC (manuf
0x4BF, id 0x82D, rev 0x05, class 0x0)
[ 4.189431] bcma-host-soc 18000000.axi: bus0: Core 4 found: GBit MAC (manuf
0x4BF, id 0x82D, rev 0x05, class 0x0)
[ 4.199845] bcma-host-soc 18000000.axi: bus0: Core 5 found: GBit MAC (manuf
0x4BF, id 0x82D, rev 0x05, class 0x0)
[ 4.210289] bcma-host-soc 18000000.axi: bus0: Core 6 found: GBit MAC (manuf
0x4BF, id 0x82D, rev 0x05, class 0x0)
[ 4.220630] bcma-host-soc 18000000.axi: bus0: Core 7 found: PCIe Gen 2 (manuf
0x4BF, id 0x501, rev 0x01, class 0x0)
[ 4.231151] bcma-host-soc 18000000.axi: bus0: Core 8 found: PCIe Gen 2 (manuf
0x4BF, id 0x501, rev 0x01, class 0x0)
[ 4.241699] bcma-host-soc 18000000.axi: bus0: Core 9 found: PCIe Gen 2 (manuf
0x4BF, id 0x501, rev 0x01, class 0x0)
[ 4.252284] bcma-host-soc 18000000.axi: bus0: Core 10 found: ARM Cortex A9 core
(ihost) (manuf 0x4BF, id 0x510, rev 0x01, class 0x0)
[ 4.264313] bcma-host-soc 18000000.axi: bus0: Core 11 found: USB 2.0 (manuf
0x4BF, id 0x504, rev 0x01, class 0x0)
[ 4.274710] bcma-host-soc 18000000.axi: bus0: Core 12 found: USB 3.0 (manuf
0x4BF, id 0x505, rev 0x01, class 0x0)
[ 4.285118] bcma-host-soc 18000000.axi: bus0: Core 13 found: SDIO3 (manuf 0x4BF,
id 0x503, rev 0x01, class 0x0)
[ 4.295345] bcma-host-soc 18000000.axi: bus0: Core 14 found: ARM Cortex A9 JTAG
(manuf 0x4BF, id 0x506, rev 0x01, class 0x0)
[ 4.306685] bcma-host-soc 18000000.axi: bus0: Core 15 found: Denali DDR2/DDR3
memory controller (manuf 0x4BF, id 0x507, rev 0x01, class 0x0)
[ 4.319415] bcma-host-soc 18000000.axi: bus0: Core 16 found: ROM (manuf 0x4BF,
id 0x508, rev 0x01, class 0x0)
[ 4.329489] bcma-host-soc 18000000.axi: bus0: Core 17 found: NAND flash
controller (manuf 0x4BF, id 0x509, rev 0x01, class 0x0)
[ 4.341111] bcma-host-soc 18000000.axi: bus0: Core 18 found: SPI flash
controller (manuf 0x4BF, id 0x50A, rev 0x01, class 0x0)
[ 4.355135] bcma-host-soc 18000000.axi: bus0: Flash type not supported
[ 4.361951] Can not parse mac address:
[ 4.370088] can not parse nvram name (null)boardnum(null) with value got -22

You might also like