Professional Documents
Culture Documents
Inyectoras Horizontales Medianas
Inyectoras Horizontales Medianas
jp/
1546 5871(300H)
・6177(460H)
・7014(890H)
826 720 2704 3167(300H)
・3473
(460H)
・4310
(890H)
Model J220AD
Unit
10
Item 300H 460H 890H
Screw barrel type K A B K(Option) A B K(Option) A B
(460H)
Screw diameter mm 40 46 51 46 53 58 58 66 72
180 210 260
2200
(460H/890H)
Screw stroke mm
・2172
2210
(300H)
(890H)
(300H)
(300H)
(460H)
(890H)
1440
Injection capacity(GP−PS) g 206 273 335 318 421 505 625 810 965
519.5
212.5
1887.5
910
2162
2302
1963
2118
Injection pressure(Max.)MPa{kgf/cm2}250
{2550} 189 {1570} 234
{1920} 154 {2380}177 {1490} 229
{1800} 147 {2330}177
{1800} 149
{1510} 750
690
1569
1579
1592
2
Holding pressure(Max.)MPa{kgf/cm }227
{2310} 172 {1420} 213
{1750} 140 {2170}161 {1360} 208
{1640} 134 {2120}161
{1640} 135
{1370}
170.5
Standard
Plasticizing rate(GP−PS)kg/h 130 184 232 115 163 197 197 282 336 1090 409 5875
-1
6284 730
(890H)
Screw speed min 400 250 250
︶ Water inlet/outlet Rc3/4
Injection pressure(Max.)MPa{kgf/cm2}250
{2550} 189 {1570} 234
{1920} 154 {2380}177 {1490} 229
{1800} 147 {2330}177
{1800} 149
{1510} (Opposite to operetor side)
High speed Option
Holding pressure(Max.)MPa{kgf/cm2}227
{2310} 172 {1420} 213
{1750} 140 {2170}161 {1360} 208
{1640} 134 {2120}161
{1640} 135
{1370}
︵
Injection speed mm/s 330 300 270
3
Injection rate cm /s 415 548 674 499 662 793 713 924 1099
Max. forward position 50 15
Plasticizing rate(GP−PS)kg/h 130 184 232 161 228 275 197 282 336
260(300H)
Screw speed min-1 400 350 250 396.5 M8 depth 15 320(460H) 4 45
φ69(300H)
Nozzle touch force kN
{tf} 24.6
{2.5} 29.6
{3.0} φ95 φ77(460H)
Nozzle stroke from platen mm 50
210
140(300H)
170(460H)
φ120 +0.035
40 60
Type of nozzle Open nozzle(Tip type)
φ4
110
200
φ110
φ75
Barrel temperature control Barrel 4 / Nozzle 1
210
10
Heater wattage kW 13.0 17.8 23.8 SR
130 4-M12 55 120 M12 depth 22
Mechanism Double toggle depth 22
195
(300H)
Clamping force kN
{tf} 2160
{220} 288 239
(460H)
4-M20 depth 43 60
Take-out robot 890H 300H / 460H
Daylight opening(Max.) mm 1130 40 90
mount tap
Clamping Unit
325
General
* * * * *
Machine weight t 12.2(12.6) 12.5(12.9) 12.9(13.3)
250
* *
200
175
125
* *
100 100
50 50
75
Machine dimensions(L×W×H)m 6.29×1.55×2.21 6.29×1.55×2.21 7.01×1.55×2.21 2
870
590
Remarks: * *
200
1.Maximum injection pressure and maximum holding pressure may be restricted due to molding condition. * * 72(96)*
-M16 depth 34
2.The theoretical injection capacity is( cross sectional area of barrel)×( stroke of screw). M16 depth 27 * *
Mold mounting hole
3.The injection capacity is applicable for GP-PS and variable according to the grade of resin, * * * *
molding conditions and mold.
* *
4.The plasticizing rate is applicable for GP-PS.
5.PC, HPVC, other engineering plastic, etc., low temperature setting
and high speed molding may require a high torque depending on the grade or molding conditions. 50 50
Please contact us if you plan.
100 100
Note:
1.Due to continual improvements, specifications are subject to change without notice. Max. forward position 50 200 200
Min. mold height 230 Movable platen side
2.Actual figures of the specification will vary depending on final machine configuration. *
590(650)
Please contact us if you require more specific data. Max. stroke 550 Max. mold height 580 The( )*
mark size is the wide
*
3.Performance specifications are based on theoretical data. 870(930) platen specification.(option)
4.High speed injection is optional.
5.The ( )* in the table is the value of wide platen specification.(option)
6.1MPa=10.2 kgf/cm2,1kN=0.102tf
280 280
Performance Table Equipment Dimensions and Mold Related Dimensions
1745 6509(460H)
・7359(890H)
10
Item 460H 890H
Screw barrel type K(Option) A B K(Option) A B
(890H)
Screw diameter mm 46 53 58 58 66 72
・2337
2200
Screw stroke mm 210 260
2210
2153
To stationary platen top
(460H)
3
Theoretical injection capacity cm 349 463 555 687 890 1059
(460H)
(890H)
1475
Injection capacity(GP−PS) g 318 421 505 625 810 965
519.5
212.5
1957
910
2207
Injection pressure(Max.)MPa{kgf/cm } 234
{2380}177
{1800} 147 {2330}177
{1490} 229 {1800} 149
{1510}
690
2
850
1614
1627
Holding pressure(Max.)MPa{kgf/cm } 213
2
{2170}161 {2120}161
{1360} 208
{1640} 134 {1640} 135
{1370}
Standard
170.5
Injection speed mm/s 160 160
32 1126 32 90 1020 1545 1510 1820 2×5−26drill
3
Injection rate cm /s 266 353 423 423 547 651 595 595 1210 1245 3620 (Hole for vibration
Injection Unit
proof rubber)
Plasticizing rate(GP−PS)kg/h 115 163 197 197 282 336 1190 559 6075
-1 6634 725(890H)
Screw speed min 250 250
︶ Water inlet/outlet Rc3/4
Injection pressure(Max.)MPa{kgf/cm2} 234
{2380}177 {2330}177
{1490} 229
{1800} 147 {1800} 149
{1510} (Opposite to operetor side)
High speed Option
210
φ120 +0.035
40 60
Type of nozzle Open nozzle(Tip type)
φ4
110
200
170
φ110
φ75
Barrel temperature control
210
Barrel 4 / Nozzle 1
10
Heater wattage kW 17.8 23.8 SR
130 M12 depth 22 55 120 M12 depth 22
Mechanism Double toggle
Clamping force 288 239
kN
{tf} 2750
{280}
6-M20 depth 43 60
Daylight opening(Max.) mm 890H 460H
1220 40 90 40 Take-out robot
mount tap
Clamping Unit
400
General
* *
325
Machine weight t 14.4(15.0) 15.2(15.8)
250
200
175
125
100 100
50 50
6.64×1.75×2.21 7.36×1.75×2.21
75
Machine dimensions(L×W×H)m
935
630
2
200
Remarks:
1.Maximum injection pressure and maximum holding pressure may be restricted due to molding condition.
M16 depth 27
2.The theoretical injection capacity is( cross sectional area of barrel)×( st roke of screw).
3.The injection capacity is applicable for GP-PS and variable according to the grade of resin, 92-M16 depth 34
molding conditions and mold. Mold mounting hole
4.The plasticizing rate is applicable for GP-PS.
5.PC, HPVC, other engineering plastic, etc., low temperature setting
and high speed molding may require a high torque depending on the grade or molding conditions. 50 50
Please contact us if you plan. 100 100
Note:
Max. forward position 50 200 200
1.Due to continual improvements, specifications are subject to change without notice.
Min. mold height 250 * Movable platen side
2.Actual figures of the specification will vary depending on final machine configuration. 630(730)
Please contact us if you require more specific data. Max. stroke 600 Max. mold height 620 * The( )*
mark size is the wide
935(1035)
3.Performance specifications are based on theoretical data. platen specification.(option)
4.High speed injection is optional.
5.The ( )* in the table is the value of wide platen specification.(option)
6.1MPa=10.2 kgf/cm2,1kN=0.102tf
350 350
Performance Table Equipment Dimensions and Mold Related Dimensions
1821 6804(460H)
・7654(890H)
・7893(1400H)
10
Item 460H 890H 1400H
Screw barrel type K(Option) A B K(Option) A B K(Option) A B
(890H)
2200
Screw diameter mm 46 53 58 58 66 72 66 76 84
2210
Screw stroke mm 210 260 300
(460H/890H)
・2257
(460H/890H)
359.5(460H/890H)
1679(1400H)
(1400H)
3
(1400H)
Theoretical injection capacity cm 349 463 555 687 890 1059 1026 1361 1663
458.5(1400H)
160.5(1400H)
(1400H)
(460H)
900(460H/890H)
(460H)
(890H)
2045(1400H)
Injection capacity(GP−PS) g 318 421 505 625 810 965 934 1238 1513
850(1400H)
2127
2389
2073
2226
Injection pressure(Max.)MPa{kgf/cm2} 234
1395
1495
{2380}177 {1490} 229
{1800} 147 {2330}177 {1510} 241
{1800} 149 {2450}182
{1850} 149
{1510} 930
1534
1547
530
2
Holding pressure(Max.)MPa{kgf/cm } 213
{2170}161 {1360} 208
{1640} 134 {2120}161 {1370} 216
{1640} 135 {2200}163
{1660} 134
{1360}
170.5
Standard
300
Nozzle stroke from platen mm 50
40 60
φ150 +0.040
Type of nozzle
110
φ4
200
Open nozzle(Tip type)
170
φ110
φ75
Barrel temperature control Barrel 4 / Nozzle 1
300
10
Heater wattage kW 17.8 23.8 34.7 SR
130 4-M12 M12 depth 22
Mechanism depth 22 55 120
Double toggle 288(890H)
325(1400H) 239
Clamping force kN
{tf} 3440
{350} 4-M20 depth 43
890H / 1400H 460H 60
Daylight opening(Max.) mm 1370 40 140 Take-out robot
mount tap *
Opening stroke(Max.) (525)
Clamping Unit
425
General
325
Machine weight t * * * *
18.9(19.6) 19.3(20.0) 21.5(22.2)
50
250
200
* *
175
125
100 100
1085
75 75
730
Machine dimensions(L×W×H)m 6.93×1.82×2.21 7.65×1.82×2.21 7.89×1.82×2.23
2
200
Remarks: * *
50
1.Maximum injection pressure and maximum holding pressure may be restricted due to molding condition. * *
2.The theoretical injection capacity is( cross sectional area of barrel)×( st roke of screw). M16 depth 27 * *
3.The injection capacity is applicable for GP-PS and variable according to the grade of resin, 84(96)*
-M20 depth 43
molding conditions and mold. Mold mounting hole
4.The plasticizing rate is applicable for GP-PS.
5.PC, HPVC, other engineering plastic, etc., low temperature setting 50 50
and high speed molding may require a high torque depending on the grade or molding conditions. 100
100
Please contact us if you plan.
Note: 200 200
Max. forward position 50
1.Due to continual improvements, specifications are subject to change without notice. 350 350 Movable platen side
2.Actual figures of the specification will vary depending on final machine configuration. Min. mold height 300 *
Max. stroke 700 Max. mold height 670 730
(810) The( )*
mark size is the wide
Please contact us if you require more specific data. *
1085
(1115) platen specification.(option)
3.Performance specifications are based on theoretical data.
4.High speed injection is optional.
5.The ( )* in the table is the value of wide platen specification.(option)
6.1MPa=10.2 kgf/cm2,1kN=0.102tf
450 450
Performance Table Equipment Dimensions and Mold Related Dimensions
1916 8124(890H)
・8368(1400H)
・8702(2300H)
・1500(2300H)
・2260(2300H)
Item 890H 1400H 2300H
・850(2300H)
・520(2300H)
・2201(1400H)
・2364(1400H)
Screw barrel type K(Option) A B K(Option) A B A B
319.5(890H/1400H)
Screw diameter mm 58 66 72 66 76 84 84 92
70.5(890H/1400H)
1470(890H/1400H)
2230(890H/1400H)
2082(890H/1400H)
870(890H/1400H)
Screw stroke mm 260 300 420
490(890H/1400H)
100.5(2300H)
349.5(2300H)
2364(2300H)
2664(2300H)
2148(890H)
1654(1400H)
1704(2300H)
2332(890H)
2112(2300H)
1622(890H)
3
Theoretical injection capacity cm 687 890 1059 1026 1361 1663 2328 2792
Injection capacity(GP−PS) g 625 810 965 934 1238 1513 2118 2541
1120
Injection pressure(Max.)MPa{kgf/cm2} 229
{2330}177 {2450}182
{1510} 241
{1800} 149 {1850} 149
{1510}190
{1930} 158
{1610}
Holding pressure(Max.)MPa{kgf/cm2} 208
{2120}161 {2200}163
{1370} 216
{1640} 135 {1660} 134
{1360}171
{1740} 142
{1440}
170.5
1435(2300H) 2065(2300H) 1490(2300H)
Standard
2×5−26drill(890H/1400H)
Injection speed mm/s 160 160 160 32 1396 32 100 1500 1850 1485(890H/1400H) 2370(890H/1400H) 2×6−26drill(2300H)
730 730 1700 1450 4255(890H/1400H)
・5390(2300H) (Hole for vibration proof rubber)
Injection rate cm3/s 423 547 651 547 726 887 887 1064
Injection Unit
φ150+0.040
φ150+0.040
0
0
6
φ110
1 φ4
300
φ
φ75
50
φ85
Nozzle stroke from platen mm
5
0
200
1
110
SR
SR
Type of nozzle Open nozzle(Tip type) Open nozzle
300
Barrel temperature control Barrel 4 / Nozzle 1 Barrel 5 / Nozzle 1
60 60
Heater wattage kW 23.8 34.7 39.2 130
4-M12
Mechanism Double toggle 288(890H) depth 22
325(1400H) 890H/1400H 2300H
Clamping force kN
{tf} 4420
{450} 4-M20 depth 43 330(2300H)
140 Take-out robot
40
Daylight opening(Max.) mm 1600 mount tap
Clamping Unit
Ejector force kN
{tf} 99.0
{10.0}
Ejector stroke mm 180
525
425
General
* * *
325
Machine weight t 23.4(24.0) 25.0(25.6) 29.0(29.6)
250
50
2
200 200
175
100 100
125
75 75
1210
810
Machine dimensions(L×W×H)m 8.12×1.92×2.23 8.37×1.92×2.23 9.13×1.92×2.40
Remarks:
50
1.Maximum injection pressure and maximum holding pressure may be restricted due to molding condition.
2.The theoretical injection capacity is( cross sectional area of barrel)×( st roke of screw). M16 depth 27 112-M20 depth 43
3.The injection capacity is applicable for GP-PS and variable according to the grade of resin,
molding conditions and mold. Mold mounting hole
4.The plasticizing rate is applicable for GP-PS.
5.PC, HPVC, other engineering plastic, etc., low temperature setting
50 50
and high speed molding may require a high torque depending on the grade or molding conditions.
100 100
Please contact us if you plan.
Note: 200 200
Max. forward position 50
1.Due to continual improvements, specifications are subject to change without notice. Min. mold height 350 350 350 Movable platen side
2.Actual figures of the specification will vary depending on final machine configuration. Max. stroke 800 Max. mold height 800 * *
Please contact us if you require more specific data. 810(900) The( ) mark size is the wide
1210(1300)* platen specification.(option)
3.Performance specifications are based on theoretical data.
4.High speed injection is optional.
5.The ( )* in the table is the value of wide platen specification.(option)
6.1MPa=10.2 kgf/cm2,1kN=0.102tf
Standard equipment Options list
Electrical instrumentation
Open nozzle(tip type)
(Injection
/ units up to 1400H) (Note 1) Touch panel 15”TFT color LCD controller Long nozzle Multi-language select(Hangul, Spanish or French)
N2000F barrel 120 mold conditions storage(Internal memory) (Note 4) Various shut-off nozzles (Note 1) Simple centralized monitor system LINK10 (Note 8)
and control
Chrome-plated screw (Note 2) Soft start molding KC nozzle Centralized control system NET100 (Note 9)
Screw pull-back USB printer port (Note 5) K size screw and barrel (Note 2) Heater burnout alarm
Purge cover(with limit switch) Self diagnostics function M7 screw(High plasticization type) Mold temperature display(with mold temperature upper/lower limit alarm)
Injection unit swiveling device(with limit switch) Overall setting screen HP screw(High dispersion type) Mold temperature control device(with mold temperature upper/lower limit alarm)
Controller
Screw cold start prevention Help function LSP-2 screw(Abrasion-resistant type) Printer(with a printer cable)
Injection unit
Molding/Pause temperature select Pop-up display One set of screws and barrels for molding optical products Cooling water open circuit device
Auto purging circuit Pre-heat timer Special screw (Note 3) Cooling water failure warning
Injection unit
Other
Nozzle retract select Compound action HT screw head Leveling pad for installation
Pull-back select Clock One set of screws and barrels for high temperature molding of super engineered plastics Rotary warning light
Auto grease lubrication Attended/unattended operation select Barrel insulation cover Export specification (Note 10)
Injection/Metering Injection/Holding pressure:1 to 6 steps(Variable) Product takeout robot circuit Barrel blower cooling unit Designated color (Note 11)
programmed control Metering/Back pressure:1 to 3 steps(Variable) Multi-language select(English, Chinese, Japanese) Hopper(Option for all the region) (Note)
IVS control(Holding pressure transfer by speed detection) Injection pressure overshoot alarm Hopper swiveling device 1. A spring type SVN shutoff nozzle, a pneumatic shut-off nozzle and a hydraulic shut-off nozzle
Barrel temperature remote setting Grease lubrication fault alarm High-speed injection (Note 4) can be mounted. For the hydraulic type, a separate hydraulic unit is needed.
For injection units 180H or smaller, a pneumatic shut-off device is provided as a standard option.
Barrel temperature control(SSR) (Note 3) Servo fault alarm High holding pressure molding(for long-time holding pressure molding)
(Note 5)
Regarding the hydraulic shut-off device, discussion is needed separately.
Soft Pack Servo control Fault alarm buzzer Vented barrel 2. The high-speed injection specification applies to the injection units, 460H, 890H and 1400H.
Hopper flange temperature control Statistical graph Wide platen(Stationary platen and Movable platen) 3. Regarding special screws, contact us separately.
Daylight extension 4. The high-speed injection specification applies to the injection units 300H, 460H, 890H and 1400H.
IWCS(Injection Weight and Cushion Stability)control Actual value display
The injection speed differs depending on injection unit.
Reverse seal control Mold temperature display (Note 6) Thermal insulation plate for platens (Note 6)
5. The motor is prevented from being overloaded in a long holding time
Holding pressure control select Cumulative operating hour display Various locating rings and high holding pressure molding condition.
Synchronous temperature rise control Barrel temperature monitor Air jet 6. When applied, extended nozzle is required.
Monitor
Clamping unit
8. The LINK10 has actual data collection, molding condition control
High-performance platen support Injection/Metering waveform monitor Ejector gate cutting device and remote control functions.
Flat press platen mechanism(Stationary side/Movable side) Production monitor Ejector plate return confirmation circuit 9. The NET100 has quality control and production control functions in addition
to the functions that the LINK10 has.
Tie bar pre-tensioning mechanism Cycle monitor Valve gate device(Pneumatic type and Hydraulic type) (Note 7)
10. Regarding the export specifications, separate discussion is needed in some cases,
Mold open/close and Mold open/close: 4 steps(Fixed) Molding condition upper/lower limit monitor (Note 7) Product drop detector(Photoelectric) depending upon the export destination.
Clamping unit
ejection programmed control Ejection: 1 to 3 steps(Variable) Injection/Metering waveform storage Chute 11. Designate colors, referring to color samples or Munsell codes.
Electric-driven mold thickness adjusting device Heater system fault Rejecting product detecting chute
Mold thickness remote setting Inspection and maintenance guide (Note 8) Mold setup device
Auto clamping force setting Alarm history T-groove plate (Note 6)