Professional Documents
Culture Documents
What Is Rogers RO3010 PCB
What Is Rogers RO3010 PCB
having great electrical and mechanical stability. With this stability, the
circuit miniaturization.
The design of this circuit board has to do with the microwave circuit’s
ability.
11.20, which can reach 40 GHz. Asides from this, its dissipation factor at 10
GHz is 0.0022, which is suitable for patch antennas, GPS antennas, direct
RO3010 can be transformed into PCBs (Printed Circuit Boards) making use
modifications.
Table of Contents
General Parameters
combustion for over 10 seconds. Its peel strength and water absorption
values are 9.4 lb/in and <0.1%. Also its thermal coefficient and thermal
Benefits
assemblies. Also, this makes them great for applications that are
stability is ensured.
used with epoxy glass board hybrid designs with multiple layers.
to 77GHz.
Antenna Systems
the military as well as automotive radar systems that are advanced. These
Patch Antennas
antenna structures.
Phased Array
materials for them, some key designs to consider include stable and low
Conformal Antennas
The Roger RO3010 is also great for non-planar uses, and has been
frequency. High thermal conductivity and low CTE ensures more reliability
Communication Systems
laminates with high-frequency won’t just deliver low loss, they also
reveal that controlling the dielectric constant for that material may be very
Power Amplifiers
Rogers has been well-known for providing materials for advanced and RF
microwave power amplifiers and the Rogers RO3010 is not left out. High
over temperature, and low loss, offer the highest power output and
efficiency possible.
comes in. The low loss, as well as the thermally-stable RF materials goes a
long way in achieving the best performance even in environments that are
very demanding.
low loss materials of the Rogers 3010 supports lower crosstalk, higher
data rates, and faster switching. The design of the RO3010’s composites is
for skew reduction via using relatively low fiberglass and flat glass content.
The Roger RO3010 is useful for Wifi and handheld device cellular antennas.
This is because most handheld devices have WiFi and cellular antennas.
This ensures even the smallest of mobile devices has access to the
internet through local WiFi access points or global mobile networks. It also
has the ability to convert the device into a hotspot. With high performance
Conclusion
shrinkage.
Related Posts:
https://www.raypcb.com/rogers-ro3010-pcb/