Professional Documents
Culture Documents
Dla71 Ds Eng
Dla71 Ds Eng
Pump alternating
Type DLA71
• Pump alternating relay for 2 or 3 pumps
• Output: 2 x 5 A SPST relay or 3 x 5 A SPST
• For mounting on DIN-rail in accordance with
DIN/EN 50 022
• 35.5 mm DIN-rail housing
• LED indication for relay and power supply ON
• Galvanically separated power supply
• Built-in delay for the second or third pump in case of
simultaneous activation is required
• Built-in function for automatic rotation of the pumps
Type Selection
Mounting Output Function Supply: 24/48 VAC Supply: 115/230 VAC
Disabled > 10 kΩ
Enabled < 1 kΩ
Voltage < 25 V
Current < 2 mA
Mode of Operation
DLA71 is made for pumping Example 2 described in example 1 Note (3-pump system)
systems where 2 or 3 pumps (emptying a basin, 2-pump except that if switch S3 is If the system is continuously
are in parallel. It lets the system, differential mode) reached three pumps work working with only one pump,
pumps work alternatively, In this case the pumps are at the same time. When they after working for 6 hours,
allowing more pumps to separately started and switch back the pumps are DLA71 stops the pump and
work togheter in case of stopped by the two pairs of turned off in sequence start- the second one automatical-
need. switches S1, S2 and S3, S4. ing from the one running ly starts. If also the second
Appropriate positioning longer. pump works continuously
Example 1 allows the pumps to work alone for 6 hours, it is
(emptying a basin, 2-pump together in case of need. Example 4 stopped and the third pump
system) (emptying a basin, 3-pump is then started.
As soon as the liquid reach- Note (2-pump system) system, full mode) If a couple of pumps is con-
es switch S1 one pump If the system is continuously As soon as the liquid reach- tinuously working for 6
starts. As soon as S1 working with only one pump, es switch S1 one pump hours, the one running for
switches back the pump after working for 6 hours, starts. When it drops below more time stops and the free
stops. When switch S1 is DLA71 stops the pump and switch S4 it stops. If switch one starts.
activated again the other the second one automatical- S1 is triggered again another This rotation is repeated
pump starts allowing uni- ly starts. pump starts. If switch S2 is every 6 hours of continuative
form wear and tear of all the This rotation is repeated activated a second pump work of a pump or a couple
pumps. If switch S2 is acti- every 6 hours of single and starts (rescue function). If of pumps.
vated both pumps start (2 continuative work of a switch S3 is activated all the
pumps running at the same pump. pumps operate. The only Note (2 and 3-pump sys-
time). When S2 switches switch to stop all the pumps tems)
back the pump running Example 3 active at a certain time is S4. In case the task is to fill a
since most time stops. (emptying a basin, 3-pump basin, all the switches are
system, normal mode) reversed in the basin itself.
The system works exactly as
Operation Diagrams
Example 1 (empting mode) Power supply
L m m
S4 A1 A3 18 28 S1
S3
S2
S2
S1 C A2 15
S3
N
S4
15 -18
S2
15 -28
S1
PUMP 2
PUMP 1
Automatic
rotation function 6h 6h 6h 6h Working time
S4 A1 A3 18 28
S3 S1
S2 S2
S1 C A2 15
S3
N
S4
15 -18
15 -28
S2
S4
S1
PUMP 2
S3
PUMP 1
Automatic
rotation function 6h 6h 6h 6h Working time
S4 A1 A3 18 28 38
S3 S1
S2 S2
S1 C A2 15
S3
N
S4
15 -18
15 -28
S3
15 -38
S2
S1
PUMP
PUMP 3
3
PUMP 2
PUMP 2
PUMP11
PUMP
Automatic
rotation function 6h 6h 6h 6h Working time
S4 A1 A3 18 28 38 S1
S3
S2
S2
S1 C A2 15
S3
N
S4
15 -18
15 -28
15 -38
S3
S2
PUMP 3
PUMP 3
S1
S4 PUMP
PUMP 2
2
PUMP
PUMP 1
Automatic
1
S1
L m m
S2
S4 A1 A3 18 28
S3
S3
S2
S1 C A2 15 S4
N 15 -18
15 -28
S3
S1
S4
Automatic
S2
rotation function 6h 6h 6h 6h Working time
Wiring Diagrams
DLA71...2P DLA71...3P
L m m L m m m
S4 A1 A3 18 28 S4 A1 A3 18 28 38
S3 S3
S2 S2
S1 C A2 15 S1 C A2 15
N N
35.5 67.2
18.7
81
45
2