Professional Documents
Culture Documents
Hissan Catalog
Hissan Catalog
HISSAN GEORGIA
PT HISSAN TRADING INDONESIA
TAJIKISTAN
IRAN
SAUDI KUWAIT AFGHANISTAN
ARABIA
QATAR
PAKISTAN
AE NEPA
JORDAN OMAN
YEMEN INDIA
SRI LA
MALDIVES
PRODUCT
CATALOG
Building & Factory / Marine Port
Airport / Tunnel + Soil Stabilization
Power Plant / Water & Sewage System
Road / Bridge
QUALITY POLICY
PAGE 03
AIRPORT
PAGE 10 - 11
POWER PLANT
PAGE 14 - 15
ROAD
PAGE 18 - 19
BRIDGE
PAGE 20 - 21
1
OUR Specialty-Fusion Company
Become a
OUR
MISSION
WATERSTOP
EXPANDING WATERSTOP (SWELLABLE) NON EXPANDING WATERSTOP (PVC)
Features Features
ESTOPPER Easy installation by means of ESTOPPER CJ/EJ: Simple on site jointing
HYDROPHYLIC adhesives CENTRALLY PLACED PVC
WATERSTOP
S10 & S20 4 bulbs profile for excellent
Tolerant of salts present in performance
concrete and groundwater ESTOPPER
Specification REARGUARD: Reinforced eyeleted for positive
> Solid content: 100% Sustain effective seal in wet EXTERNALLY PLACED fixing
> Shore “A” Hardness: condition
WATERSTOP
5-35
> Unrestrained Specification
Volumetric Expansion: > Color: Black
170 – 200% > Elongation at break:
>300%
FLOORING
Specification
Specification > Cure time: 12 – 24 hours
> Cure time: 12 – 24 hours > Touch dry at 25oC: 4 – 8 hours
> Touch dry at 25oC: 2 – 3 hours > Standard Color: Grey / Green
> Standard Color: Black > Water absorption: <0.1 %
> Recommended thickness (WFT): 2 coats at 1.5 ± 0.2 mm
WATERPROOFING MEMBRANE
Good adhesion to prime concrete Tough and flexible membrane Protect against root penetration
substrate
Packaging 1x 10 m/ roll Environmentally friendly product
For basement, rooftop, toilet
Can be applied on damp surfaces Specification Specification
> Thickness 3mm and 4 mm > Appearance liquid
Specification > Tensile Strength, Longitudinal > Colors black
> Elongation at break > 600% 820N/5cm > 0.5kg/m²/coat (25kg per pail)
> Tensile strength > 0.80 N/mm2 > Transversal 600N/5cm (depends on porosity of surface)
> Adhesion to self 4 N/mm
REPAIRING
JOINTS
PROTECTIVE COATING
Specification Features
ESTOTECT MMA > Highly UV-resistant Is a methyacrylate, solvent based
HIGH PERFORMANCE METHYACRYLATE > Excellent resistance to dirt pick up protective coating, with outstanding
PROTECTIVE AND DECORATIVE COATING resistance to aggressive elements, UV
light and rain
Features Features
Fast setting repair concrete Non shrink and flowable grout
Specification Specification
> Rapid strength gain > Non shrink
> High strength, abrasion, and weather > Early strength development even at
resistance flow able consistency
> Self – compacting – eliminates honey – > Strength 28Days : 70 Mpa.
combing and voids
ESTOPATCH MP ESTOGROUT UW
CEMENTITIOUS POLYMER MODIFIED NON-SHRINK CEMENTITIOUS GROUT
REPAIR COMPOUND FOR UNDER WATER INSTALLATIONS
Features Features
Single component shrinkage repair Grout under water
mortar application thickness of 40mm
vertical and 25mm soffit without Specification
formwork. > No risk of significant ‘wash-out’ of
cement phase when placed underwater
Specification > Displaces water effectively
> Shrinkage compensated, can be
applied over large areas without
cracking or de-bonding
> Composition ensures excellent
adhesion
Features
DENKA QUICK SET > 30 Mpa strength obtainable in 2 –
SUPER QUICK HARDENING ADDITIVES 3hours.
> Similar hardening performance even at
low winter temperatures with S-5
Specification
> Reduce slump loss
> Highways, railways, bridges, piers etc
> Increase cracking resistance
> Construction at low temperature
> Concrete foundation construction,
repair.
> Wall, floor repairs
ANODE PROTECTION
VECTOR GALVANIC ANODE
Features
GALVASHIELD CC/XP Range of embedded galvanic anode units
EMBEDDED GALVANIC ANODE UNITS FOR utilize an innovative zinc anode core
CORROSION CONTROL design surrounded by an enhanced
formulated cement-based mortar
Specification Resistance to chemicals and bacterial
Focused protection – discrete anodes growth
can be installed to provide corrosion
protection in areas with high corrosion
potentials or active corrosion
Features Applications
DENKA CSA#20 Minimize the cracking caused by > Dry mix mortar to minimize cracking
CHEMICAL PRE-STRESS, MITIGATES
CRACKS IN GENERAL STRUCTURE
drying shrinkage (shrinkage due to dry shrinkage
compensation) > Precast concrete member to improve
bending toughness by chemical
pre-stress with reinforced bar
JOINTS
Features
ESTOPPER HYPATITE Designed for sealing joints in concrete pavements, airfield
ELASTOMERIC MEMBRANE SYSTEM FOR EXPANSION JOINT aprons, cargo terminals, warehouse and parking areas
WATERPROOFING
Specification
Features > High resistance to weathering
> Use in movement joint or crack in a structure to prevent > Resistance to petrol, oil or fuel occasional spillage
ingress of water > Resist dirt and ingress or grit associated with trafficked
> Elevated structure pavements
CONCRETE REPAIRS
Features Features
Fast setting repair concrete. Consist of three component material. Most suitable for
emergency works where construction time is limited
Specification
> Rapid strength gain Specification
> High strength, abrasion, and weather resistance > 30 N/mm2 strength obtainable in 3 hours
> Achieved of good initial strength
> It can be applied to wet conditions
Features Features
Premix non shrink dry mortar developed to meet customer > Ground anchor
needs. > Bed grouting
> Infilling and jointing
Bonds well with existing concrete structures, preventing any
gaps that lead to bleeding.
Excellent durability.
Application
> Standard grout work
> Large volume/ surface area foundations
> Long distance pumping
SOIL STABILISATION
Features Features
Adjustable gelling time of seconds ~ 10 mins Adjustable gelling time of 10 mins ~ several hours
Specification Specification
> Rapid hardening material with low alkalinity > Inorganic material composed of cement minerals
> Needle-shaped crystals produced by hydration reactions > Excellent permeability in combination with fine cement or
super fine cement
Features Features
Quick setting time and high initial strength Quick setting time and high initial strength achieved through
initial ettringite formation
Development of high compressive strength after 28 days and
excellent long-term durability Development of high compressive strength and excellent long
term durability.
JOINTS
Features Features
Gun applied and moisture activated polyurethane sealant Based on a liquid polysulphide polymer which when mixed
that will accept limited movement normally associated with with the hardener, cures to form a tough rubber like seal.
the applications described
Specification
Specification > Excellent adhesion to most common substrates
> One part gun application > High resistance to ageing reduces physical damage due to
> No mixing required climatic extremes at 35⁰C
> Cures to a tough, flexible rubber
WATERPROOFING
TUNNEL REPAIRS
Features
Able to stop water leakage permanently and it is nontoxic ESTOPATCH MP
when cured CEMENTITIOUS POLYMER MODIFIED REPAIR COMPOUND
Specification
> Deep penetration into very small cracks
> Foam increases in volume to fill cavities and voids
ROAD REPAIRS
Features Features
Three component, solvent free epoxy resin grout design for Consist of three component material. Most suitable for
grouting of gap width 10 to 75mm emergency works where construction time is limited
Specification Specification
> Excellent durability – high compressive strength, flexural > 30 N/mm2 strength obtainable in 3 hours
and tensile strengths ensure a long working life > Achieved of good initial strength
> Excellent in service performance – non-shrink capability > It can be applied to wet conditions
ensures full surface to surface contact
Features Specification
DENKA QUICK SET > 30 Mpa strength obtainable in 2 – > Highways, railways, bridges, piers etc
SUPER QUICK HARDENING ADDITIVES 3hours. > Construction at low temperature
> Similar hardening performance even at > Concrete foundation construction,
low winter temperatures with S-5 repair.
> Reduce slump loss > Wall, floor repairs
> Increase cracking resistance
ESTOFORM OB ESTOFORM WB
OIL BASED MOULD RELEASING AGENT WATER BASED MOULD RELEASING AGENT
WATERPROOFING
Features Features
One part cementitious crystallization waterproofing coating 1 component rubberized bitumen emulsion sealing that
design for used as a damp proof membrane, vapor barrier,
Application waterproof and protective coating
Reacts with water to form a non-soluble crystalline matrix
throughout the capillary voids in concrete Application
> Fast drying & waterproof
> Permanent flexibility
> Applicable on fresh concrete
> Low water vapor permeable
Features Features
High quality polyvinylchloride compound that formulated to Based on a liquid polysulphide polymer which when mixed
provide excellent flexibility and longevity characteristic with the hardener, cures to form a tough rubber like seal.
Specification Application
> 4 bulbs profile for excellent performance > Excellent adhesion to most common substrates
> Suitable for potable water usage > High resistance to ageing reduces physical damage due to
climatic extremes at 35⁰C
Features Features
Added to cementitious mortars & floors toppings to improve Single component shrinkage compensated pre-packed
adhesion and strength repair mortar that allow application thickness of 40mm
vertical and 25mm soffit without formwork.
Specification
> Single component Specification
> Can be used as curing membranes for Estopatch material > Shrinkage compensated, can be applied over large areas
without cracking or de-bonding
> Composition ensures excellent adhesion
Features Features
Premix non shrink dry mortar developed to meet customer Pre- mixed non shrink mortar developed as grouting
needs. material. It can be used only mix with water. It has high
flowability and it makes non void grout
Bonds well with existing concrete structures, preventing any
gaps that lead to bleeding. High integration with base concrete is attempted. There is no
bleeding.
Excellent durability.
Heat resistance – reduce cracks cause form hydration heat.
Application
> Standard grout work Application
> Large volume/ surface area foundations Grouting under heavy machine. Foundation or steel structure,
> Long distance pumping reinforcement for building.
PROTECTIVE COATING
JOINTS
Features Features
For forming of filling expansion joints Has outstanding resistance to UV
between adjacent in-situ and precast weathering and commonly occurring
components chemicals
Applications Specification
> Non-extruding Excellent movements and flexibility
> Low load transfer to joint edges tolerance
> Non-tainting and rot proof
> Bitumen free
CONCRETE REPAIR
Features Features
Controlled expansion in plastic stage Two parts epoxy resin mortar with ESTOPATCH RSP
with minimizing water demand and excellent compressive strength RAPID SETTING PATCH REPAIR
eliminate segregation under pumping CONCRETE FOR PAVEMENTS AND FLOOR
pressure Specification
> Rapid hardening with no shrinkage
Specification > Applicable on exceptionally wet
ESTOPATCH MP
High ultimate strength and low condition and underwater applications CEMENTITIOUS POLYMER MODIFIED
permeability provide maximum REPAIR COMPOUND
protection against CO2 and chloride
ESTOGROUT UW
NON-SHRINK CEMENTITIOUS GROUT
FOR UNDER WATER INSTALLATIONS
ESTOP ADMIX RS
FAST SETTING LIQUID
WATERPROOFING
Features Features
Two parts extended epoxy coating, which is able to provide a High gloss nontoxic coating based on solvent free epoxy
protection to concrete and metal structures against resins containing pigments and fine fillers
corrosion from aggressive environment
Specification
Specification > Non-toxic, suitable for contact with food and potable water
> Easily application can be dry brush or spray > Smooth, glossy, easy to clean surfaces
> Chemical and abrasion resistant
Features Features
Minimize the cracking caused by drying shrinkage > Quick setting time and high initial strength achieved
(shrinkage compensation) through initial ettringite formation
> Development of high compressive strength and excellent
Applications long term durability.
> Dry mix mortar to minimize cracking due to dry shrinkage
> Precast concrete member to improve bending toughness Application
by chemical pre-stress with reinforced bar > Rock support in underground spces (tunnels, headraces
and mines)
> Slope stabilization
JOINTS
Features Features
Recommended for use in immersed condition to any joint For forming of filling expansion joints between adjacent
sealing compound by contaminating the joint faces in-situ and precast components
Specification Application
> Simple and easy to handle and install > Non-extruding
> vWill not extrude under compression > Low load transfer to joint edges
> Non-tainting and rot proof
> Bitumen free
Features Features
Has outstanding resistance to UV weathering and commonly Sealing movement and construction joints in concrete
occurring chemicals pavements and floor slab that possesses good adhesion to
concrete and asphaltic materials.
Specification
Excellent movements and flexibility tolerance Specification
An economical sealant for horizontal and inclined joints up to
1 in 20
Features Features
DENKA SC 30
Consist of three component material. > High flowability
Most suitable for emergency works > Quick hardening
where construction time is limited > High integration with base concrete
Specification Specification
> 30 N/mm2 strength obtainable in 3 > Machinery foundations
hours > Emergency repair works
> Achieved of good initial strength > Bridge shoe
> It can be applied to wet conditions
Features Features
> 30 Mpa strength obtainable in 2 – 3hours. > Fast setting patching material which suitable to be used for
> Similar hardening performance even at low winter asphalt, concrete and semi-rigid pavement repair
temperatures with S-5 application.
> Reduce slump loss > Coverage 0.37 m2 at 5mm thick
> Increase cracking resistance
Specification
Specification Repairing road, asphalt concrete and semi-rigid pavement.
> Highways, railways, bridges, piers etc
> Construction at low temperature
> Concrete foundation construction, repair.
> Wall, floor repairs
JOINTS
Features
2-component solvent free epoxy resin system that specially
formulated to meet the requirements for bonding
prefabricated concrete bridge segments
Specification
> High strength, cures at low temperature to give high
physical properties
> Non-sag, easy to apply, non-slump product
ESTOPATCH MP
Features Features CEMENTITIOUS POLYMER MODIFIED
Consist of three component material. > High flowability REPAIR COMPOUND
Most suitable for emergency works > Quick hardening
where construction time is limited > High integration with base concrete
DENKA PRETASCON TYPE 1R
Specification Specification NON SHRINK MORTAR FOR GROUT
> 30 N/mm2 strength obtainable in 3 > Machinery foundations ( ENHANCED FLUIDITY)
hours > Emergency repair works
> Achieved of good initial strength > Bridge shoe
> It can be applied to wet conditions
DENKA QUICK SET
SUPER QUICK HARDENING ADDITIVES
BEARING PAD
STRENGTHENING WORKS
CHINA
TAIWAN
MYANMAR PHILIPPINES
LAOS
VIETNAM
THAILAND
CAMBODIA
BRUNEI
DIPL
SINGAPORE
INDONESIA
EAST TIMOR
Notice
The Information contained in this document is general advice for potential customers of DENKA & Estop about the basic properties and characteristics of various
DENKA & Estop products (hereafter referred as to the entire accuracy or completeness of Product Information in this brochure.
Nothing in this brochure will be deemed to create any express or implied warranty or obligation of DENKA & Estop with respect to the Product Infomation or its use,
including, but not limited to, any warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property rights.
Each user of the Product Information and DENKA & Estop products assume their own reponsibilty to properly determine the manner and suitability of use of the Product
Information and DENKA & Estop products in its own operations. The use should exercise proper care in considering the Material Safely Data Sheet, Product Information
and any other technical information provided by DENKA & Estop including descriptions of conditions of use, warnings, and cautionary instructions.
Denka reserves the right to change the Product Information from time to time at its discretion and without notice.