Professional Documents
Culture Documents
Slab Design As Per Is 4562000
Slab Design As Per Is 4562000
Slab Design As Per Is 4562000
ley/lex= 4.24/3.427
= 1.237 if ley/lex < 2, then it is two way slab
Slab Type= Two Way Slab otherwise one way slab
Load Claculation
αx+ve = 0.045+[{(0.049-0.045)/(1.3-1.2)}*(1.237-1.2)]
= 0.0465
For Two Adjacent Edges Discontinuous the value of αy-ve and αy+ve
is taken from IS 456:2000 Table-26
αy-ve= 0.047
αy+ve= 0.035
Mmax= 0.133*fck*b*dreq^2
11.17 *10^6= 0.133*25*1000*dreq^2
dreq= 57.960 mm < effective depth provided ( 125mm.) OK
Mx-ve = 0.87*fy*Astx-ve*dx*[1-{(Astx-ve*fy)/(b*dx*fck)}]
11.17*10^6= 0.87*500*(Ast)x+ve*125*[1-{(Astx+ve*500)/(1000*125*25)}]
Astx-ve = ###
Similarly,
Astx+ve = ###
Asty-ve = ###
Asty+ve = ###
(Ast)min= 0.12% of bD
= 180 mm² ###
Taking maximum area between Ast and (Ast)min for spacing calculation
Provide 8mm dia. bar @ dia. bar @150mm c/c at support of X-axis
Provide 8mm dia. bar @ dia. bar @150mm c/c at mid-span of X-axis
Provide 8mm dia. bar @ dia. bar @150mm c/c at mid-span of Y-axis
Provide 8mm dia. bar @ dia. bar @150mm c/c at mid-span of Y-axis
Vmax= τ=
= (15.375*3.427)/2 = (26.345*10^3)/(1000*125)
= 26.345 KN = 0.211 N/mm²
0.268
For M25 concrete and (As*100)/bd) value
(τc)= 0.341 value calculated from IS456:200 Table-19
k= 1.30
K*τc= 1.3*0.341 for solid slab (IS 456:2000 Clause 40.2.1)
Design Shear strength= 0.44 N/mm²
Design shear strength of concrete (τc)min= 0.28 N/mm² IS456:200 Table-19
Maximum shear stress (τc)max= 2.80 N/mm² IS456:200 Table-20
τ<(τc)min OK
τ < kτc < (τc)max OK
= 0.58*500*[(Ast.req.)/(Ast.provided)]
= 137.070
Now,
αβγδλ= 23*1*2*1*1
= 46
l/d= 3.556/(125/1000)
= 28.45
(l/d)<αβγδλ OK
SLAB DESIGN
ley/lex= 0/0
= #DIV/0! if ley/lex < 2, then it is two way slab
Slab Type= #DIV/0! otherwise one way slab
Load Claculation
ley/lex 0 ley/lex 0
The value of ley/lex and α 1.1 0.06 1.1 0.045
is taken from IS 456:2000 Table-26 #DIV/0! αx-ve #DIV/0! αx+ve
1.2 0.065 1.2 0.049
αx+ve = #DIV/0!
= #DIV/0!
For Two Adjacent Edges Discontinuous the value of αy-ve and αy+ve
is taken from IS 456:2000 Table-26
0 #N/A
0 #N/A
Mmax= *fck*b*dreq^2
#DIV/0! *20*1000*dreq^2
dreq= #DIV/0! #DIV/0!
)
Mx-ve = 0.87*fy*Astx-ve*dx*[1-{(Astx-ve*fy)/(b*dx*fck)}]
#DIV/0! 0.87*500*(Ast)x+ve**[1-{(Astx+ve*500)/(1000**20)}]
Astx-ve = #DIV/0!
Similarly,
Astx+ve = #DIV/0!
Asty-ve = #DIV/0!
Asty+ve = #DIV/0!
(Ast)min= ###
= 0 mm² #DIV/0!
Taking maximum area between Ast and (Ast)min for spacing calculation
Provide 8mm dia. bar @ dia. bar @150mm c/c at support of X-axis
Provide 8mm dia. bar @ dia. bar @150mm c/c at mid-span of X-axis
Provide 8mm dia. bar @ dia. bar @150mm c/c at mid-span of Y-axis
Provide 8mm dia. bar @ dia. bar @150mm c/c at mid-span of Y-axis
Vmax= τ=
= (10.688*0)/2 = (0*10^3)/(1000*0)
= ### = #DIV/0!
#DIV/0!
For M20 concrete and (As*100)/bd) value
(τc)= 0.000 value calculated from IS456:200 Table-19
k= 1.30
K*τc= 1.3*0 for solid slab (IS 456:2000 Clause 40.2.1)
Design Shear strength= ###
Design shear strength of concrete (τc)min= ### IS456:200 Table-19
Maximum shear stress (τc)max= ### IS456:200 Table-20
#DIV/0! #DIV/0!
#DIV/0! #DIV/0!
xis
-axis
-axis
-axis
6:200 Table-19
Clause 40.2.1)
Stair Cae Design
DATA
Effective Span (l) 3.556m
Riser (R) 159mm
Tread (T) 254mm
Waist Slab thickness (t) 150mm
Clear Cover 20mm
Effective Depth of waist slab(d) 124mm
Grade of Concrete(fck) 25MPA
Grade of Steel (fy) 500MPA
Calculation of load
On waist slab On landing
Selt wt. of waist slab 4.424 kn/m^2 Self wt. of landing 3.75 kn/m^2
Selt wt. of steps 2 kn/m^2 Live load 3 kn/m^2
live loads 3 kn/m^2 Finishing load 0.6 kn/m^2
Finishing load 0.6 kn/m^2 Total load 7.35 kn/m^2
Total load 10.024 kn/m^2 Factored load 11.025 kn/m^2
Factored Load 15.036 kn/m^2