Professional Documents
Culture Documents
Pages From B - c3850 - Hig
Pages From B - c3850 - Hig
Pages From B - c3850 - Hig
Step 2 Connect the end of the cable with a green band to either StackPower port on the first switch. Align the connector
correctly, and insert it into a StackPower port on the switch rear panel.
Step 3 Connect the end of the cable with the yellow band to another switch (to configure StackPower power sharing).
Step 4 Hand-tighten the captive screws to secure the StackPower cable connectors in place.
Figure 33: Connecting the StackPower Cable to a StackPower Port
Caution Removing and installing the StackPower cable can shorten its useful life. Do not remove and insert
the cable more often than is absolutely necessary.