Professional Documents
Culture Documents
CT 2 5th Sem
CT 2 5th Sem
School of studies
Engineering
and Technology
DEPARTMENT OF MECHANICAL ENGINEERING
Subject: Dynamics of Machines (CT-11)
B.Tech (V Semester,2022-23
MAX MARKS: 15
TIME: 1HR
Irom the remaining
ueStuonI & 2 are compuisory. Attempt any three questions questons
What Is the function of governor? How does it differ from that of a flywheel (1.5
2. What is meant
by Vibrations? How are they caused? (1.5)
h e arms of a Hartnel governor are of equal length, When the sleeve is in mid position, the masses rotte
in 3 circle with a diameter of 150 mm (the arms are vertical in mid position). Neglecting friction, the equilibrium
o tor ths position is 360 rpm. Maximum variation of speed, taking friction into account, is to be 6% or the
tor a maximum sleeve movement of 30 mm. The sieeve mass
tionspeed is S kg and the friction at the
sleeve is 3S N.
ASSuming that the power of the governor is sufficient the friction by 1% change of speed on each side or tne
obliquity efect of ams), the ()
nstiffness ndof
the
ineglecting mass of each ball(i) spring stilfness tii) initial
The torque
spring (4)
developed by a certain engine is
machine that
represented by (1800 320 sin28) N-m. The engne arives
requires a driving torque of (180+200 N-m. The
sin ) rotating parts have a mass or
430 *E w
a raous of
BYration ot a80 mm. it the maximum
speed of rotation is 210 rpm, determine the power
by the engine at the mean speed. Also find the coefficient of fluctuation of speed and minimum speed or oevetope
rotation.
4
erye ne equation for the displacement of mass in case of damped vibration and distuss about nature of
vioration in
damped vibration
6. tn a singe degree damped vibrating system, the suspended mam of 4 kg makes 24 oscilations in 20 s. The
aecrease to 0.3 ot the intiai välue after 4 osciliations. Find the stiffness of the spring, the
ampi.tuae
OgartmiC cecrement, the damping tactor ana damping coefticient. (4)
II-Year-B.TECH-V-Sem- CBCS-CT-2-Examination-Sep-2022
Subject: IEE Brunch
Duration: 1Hour MaxMi
Answer any three Date: 28-09-2022(FN) All que
questions
a) Define the method study with its
Expilain the concept of partiai andobjectives
b) and define anyoneo rt?
total productivity w
the real and nominal interest
CDiscuss rate and define futureal1e
value metho mple?
d) Dcfinc the proccdurc of
mcthod study by steps?
India
Ghasidas
Guru Bilaspur, Chhattisgarh,
Vishwavidyalaya,
(A Central University Established by the Central University Act No. 23 o1 2009)
School of Engineering & Technology
Department of Mechanical Engineering
Subject:Fluid and Turbo machinery B.Tech. V Semester (New CBCS)
Time Allowed: 60 minutes Maximum Marks: 15
Date: 27.09.2022
Note:-Question 1 is compulsory.
Solve any three
. A pillar
crane has a circular base of 750 mm
questions
from Question 2 to 5.
diameter, which is fixed to the
concrete base by four identical bolts, equally
spaced on thee pitch circle of 600
mm diameter as shown in
fig. besides. The bolts are made of steel 40C8 (Su 380 =
N/mm) and the Factor of safety is 5. The maximum load is 50 kN which acts at a
radius of 750 mm from the axis of the crane.
Determine the size of the bolts if,
The load acts in plane XX at the point Pa:
i) The load acts in plane YY at point Pz. Assume
(d 0.8d) =
CT-
Engineering
subject: Computer Aided Design & Manufacturing (CAD/CAM)
B.Tech Vth Semester CBCS, Session: 2022-23
Branch: Mechanical Engineering
Time Allowed: Ihr. Maximum Marks: 15
Note:- Atempt any 3 questions all carry equal marks.
Q.5
Zerd
50