Professional Documents
Culture Documents
A3.1 Influence Lines: HB45 SV
A3.1 Influence Lines: HB45 SV
The influence lines for continuous spans illustrated in Figure A.3 to Figure A.6 have been developed
after the assessment of various proportions of individual span lengths. The lowest conversion factors
that have been obtained were used to produce the conversion charts.
For each influence line the conversion factors λHB45→SV have been produced for the following load
modes:
1) SV 80 load model;
2) SV 100 load model;
3) SV 150 load model;
4) SV 196 load model;
5) SV-TT load model.
Figure A.1 Influence line for single span: mid-span moment (L=15m)
31