Professional Documents
Culture Documents
CCNA 1 v7 de 14 16
CCNA 1 v7 de 14 16
CCNA 2 v7
CCNA 3 v7
CCNA v7 Exam Answers
Courses
Shop
0
Exam
Exam
Exam
Summary
Check answers here: CCNA2 v7 SRWE Modules 14 – 16: Routing Concepts and
Configuration. Switching Concepts, VLANs, and InterVLAN Routing Exam Answers. CCNA
200-301 Passed 100% !!
This exam will cover material from Modules 14 – 16 Routing Concepts and Configuration of
the CCNA2 Switching, Routing, and Wireless Essentials v7.0 (SRWE) curriculum. This exam
will be scored using the Weighted Model where each MCSA (Multiple-Choice Single-
Answer) is worth two points and each MCMA (Multiple-Choice Multiple-Answer) is worth
one point for each correct option. Other tasks types such as fill-in-the-blank, drag and drop
(matching) and Packet Tracer items may be included in this exam. For Packet Tracer tasks,
you must have the latest version of Packet Tracer installed on your machine.
This exam will cover material from Modules 14 – 16 of the CCNA2 Switching, Routing, and
Wireless Essentials v7.0 (SRWE) curriculum.
This exam will be scored using the Weighted Model where each MCSA (Multiple-Choice
Single-Answer) is worth two points and each MCMA (Multiple-Choice Multiple-Answer) is
worth one point for each correct option. If more options are selected than required, the student
will receive a score of zero.
When would it be more beneficial to use a dynamic routing protocol instead of static
routing?
Refer to the exhibit. A ping from R1 to 10.1.1.2 is successful, but a ping from R1 to any
address in the 192.168.2.0 network fails. What is the cause of this problem?
A network administrator configures the interface fa0/0 on the router R1 with the
command ip address 172.16.1.254 255.255.255.0. However, when the administrator
issues the command show ip route, the routing table does not show the directly
connected network. What is the possible cause of the problem?
metric
exit interface
administrative distance
maximum number of hops to the 192.168.10.0/24 network
What is a characteristic of a static route that matches all packets?
Refer to the exhibit. What command would be used to configure a static route on R1 so
that traffic from both LANs can reach the 2001:db8:1:4::/64 remote network?
Which value in a routing table represents trustworthiness and is used by the router to
determine which route to install into the routing table when there are multiple routes
toward the same destination?
routing protocol
outgoing interface
administrative distance
metric
an administrative distance of 2.
the “show ipv6 route static” command.
a destination host route with a /128 prefix.
the interface type and interface number.
What two pieces of information are needed in a fully specified static route to eliminate
recursive lookups? (Choose two.)
Please select 2 correct answers
Refer to the exhibit. The Branch Router has an OSPF neighbor relationship with the
HQ router over the 198.51.0.4/30 network. The 198.51.0.8/30 network link should serve
as a backup when the OSPF link goes down. The floating static route command ip route
0.0.0.0 0.0.0.0 S0/1/1 100 was issued on Branch and now traffic is using the backup link
even when the OSPF link is up and functioning. Which change should be made to the
static route command so that traffic will only use the OSPF link when it is up?
Refer to the exhibit. Which type of IPv6 static route is configured in the exhibit?
Refer to the exhibit. HostA is attempting to contact ServerB. Which two statements
correctly describe the addressing that HostA will generate in the process? (Choose two.)
Please select 2 correct answers
It is configured with a higher administrative distance than the original dynamic routing
protocol has.
It is used to provide load balancing between static routes.
It is simply a static route with 0.0.0.0/0 as the destination IPv4 address.
When it is configured, it creates a gateway of last resort.
Refer to the graphic. Which command would be used on router A to configure a static
route to direct traffic from LAN A that is destined for LAN C?
A(config)# ip route 192.168.5.0 255.255.255.0 192.168.3.2
A(config)# ip route 192.168.4.0 255.255.255.0 192.168.5.2
A(config)# ip route 192.168.3.0 255.255.255.0 192.168.3.1
A(config)# ip route 192.168.4.0 255.255.255.0 192.168.3.2
A(config)# ip route 192.168.3.2 255.255.255.0 192.168.4.0
What does R1 use as the MAC address of the destination when constructing the frame
that will go from R1 to Server B?
R1 leaves the field blank and forwards the data to the PC.
The packet is encapsulated into a PPP frame, and R1 adds the PPP destination address to the
frame.
R1 uses the destination MAC address of S1.
If the destination MAC address that corresponds to the IPv4 address is not in the ARP cache,
R1 sends an ARP request.
Refer to the exhibit. Which set of commands will configure static routes that will allow
the Park and the Alta routers to a) forward packets to each LAN and b) direct all other
traffic to the Internet?
Refer to the exhibit. Which interface will be the exit interface to forward a data packet
that has the destination IP address 192.168.139.244?
Serial0/0/1
GigabitEthernet0/1
GigabitEthernet0/0
None, the packet will be dropped.
Refer to the exhibit. Which interface will be the exit interface to forward a data packet
that has the destination IP address 172.19.115.206?
GigabitEthernet0/0
Serial0/0/1
None, the packet will be dropped.
GigabitEthernet0/1
A router has used the OSPF protocol to learn a route to the 172.16.32.0/19 network.
Which command will implement a backup floating static route to this network?
GigabitEthernet0/0
Serial0/0/0
None, the packet will be dropped.
GigabitEthernet0/1
Which route would be used to forward a packet with a source IP address of 192.168.10.1
and a destination IP address of 10.1.1.1?
Refer to the exhibit. What is the administrative distance value of the route for router R1
to reach the destination IPv6 address of 2001:DB8:CAFE:4::A?
110
1
120
4
Refer to the exhibit. Which interface will be the exit interface to forward a data packet
that has the destination IP address 192.168.71.52?
GigabitEthernet0/1
Serial0/0/0
None, the packet will be dropped.
The packet will take the gateway of last resort.
What characteristic completes the following statement?
When an IPv6 static route is configured, as a backup route to a static route in the
routing table, the “distance” command is used with ……
an administrative distance of 2.
the interface type and interface number.
a destination host route with a /128 prefix.
the “show ipv6 route static” command.
Which feature on a Cisco router permits the forwarding of traffic for which there is no
specific route?
Refer to the exhibit. The small company shown uses static routing. Users on the R2 LAN
have reported a problem with connectivity. What is the issue?
Refer to the exhibit. Which static route would an IT technician enter to create a backup
route to the 172.16.1.0 network that is only used if the primary RIP learned route fails?
ip route 172.16.1.0 255.255.255.0 s0/0/0 91
ip route 172.16.1.0 255.255.255.0 s0/0/0
ip route 172.16.1.0 255.255.255.0 s0/0/0 121
ip route 172.16.1.0 255.255.255.0 s0/0/0 111
On which two routers would a default static route be configured? (Choose two.)
Refer to the exhibit. What routing solution will allow both PC A and PC B to access the
Internet with the minimum amount of router CPU and network bandwidth utilization?
Configure a static route from R1 to Edge and a dynamic route from Edge to R1.
Configure a dynamic route from R1 to Edge and a static route from Edge to R1.
Configure a static default route from R1 to Edge, a default route from Edge to the Internet,
and a static route from Edge to R1.
Configure a dynamic routing protocol between R1 and Edge and advertise all routes.
Open the PT Activity. Perform the tasks in the activity instructions and then answer the
question.
A user reports that PC0 cannot visit the web server www.server.com . Troubleshoot the
network configuration to identify the problem.
What is the cause of the problem?
A serial interface on Branch is configured incorrectly.
Routing between HQ and Branch is configured incorrectly.
The clock rate on one of the serial links is configured incorrectly.
The DNS server address on PC0 is configured incorrectly.
What are two advantages of static routing over dynamic routing? (Choose two.)
Static routing requires very little knowledge of the network for correct implementation.
Static routing scales well with expanding networks.
Static routing uses fewer router resources than dynamic routing.
Static routing is more secure because it does not advertise over the network.
Static routing is relatively easy to configure for large networks.
1
32
0
100
Static routing typically uses less network bandwidth and fewer CPU operations than dynamic
routing does.
Static routes scale well as the network grows.
Configuration of static routes is error-free.
The path a static route uses to send data is known.
Static routing does not advertise over the network, thus providing better security.
No intervention is required to maintain changing route information.
Refer to the exhibit. What will the router do with a packet that has a destination IP
address of 192.168.12.227?
Refer to the exhibit. PC A sends a request to Server B. What IPv4 address is used in the
destination field in the packet as the packet leaves PC A?
192.168.12.16
192.168.10.1
192.168.10.10
192.168.11.1
Refer to the exhibit. Which default static route command would allow R1 to potentially
reach all unknown networks on the Internet?
::/0.
the “ipv6 unicast-routing” command.
the next-hop address of two different adjacent routers.
a directly connected multiaccess network.
Refer to the exhibit. The network engineer for the company that is shown wants to use
the primary ISP connection for all external connectivity. The backup ISP connection is
used only if the primary ISP connection fails. Which set of commands would accomplish
this goal?
ip route 0.0.0.0 0.0.0.0 s0/0/0
ip route 0.0.0.0 0.0.0.0 s0/1/0
ip route 0.0.0.0 0.0.0.0 s0/0/0
ip route 0.0.0.0 0.0.0.0 s0/1/0 10
ip route 198.133.219.24 255.255.255.252
ip route 64.100.210.80 255.255.255.252
ip route 198.133.219.24 255.255.255.252
ip route 64.100.210.80 255.255.255.252 10
What network prefix and prefix-length combination is used to create a default static
route that will match any IPv6 destination?
::1/64
::/0
::/128
FFFF::/128
Refer to the exhibit. What two commands will change the next-hop address for the
10.0.0.0/8 network from 172.16.40.2 to 192.168.1.2? (Choose two.)
Refer to the exhibit. How was the host route 2001:DB8:CAFE:4::1/128 installed in the
routing table?
Refer to the exhibit. Which command will properly configure an IPv6 static route on R2
that will allow traffic from PC2 to reach PC1 without any recursive lookups by router
R2?
R2(config)# ipv6 route ::/0 2001:db8:32::1
R2(config)# ipv6 route 2001:db8:10:12::/64 S0/0/1
R2(config)# ipv6 route 2001:db8:10:12::/64 2001:db8:32::1
R2(config)# ipv6 route 2001:db8:10:12::/64 S0/0/0
What happens to a static route entry in a routing table when the outgoing interface
associated with that route goes into the down state?
Refer to the exhibit. What would happen after the IT administrator enters the new static
route?
The 172.16.1.0 static route is added to the existing routes in the routing table.
The 172.16.1.0 static route would be entered into the running-config but not shown in the
routing table.
The 172.16.1.0 route learned from RIP would be replaced with the 172.16.1.0 static route.
The 0.0.0.0 default route would be replaced with the 172.16.1.0 static route.
Tags
SRWE
0010
0
Related
Exam
Exam
CCNA3 v7 ENSA | Modules 13 – 14 Exam Answers
Exam
Leave a Reply
Your email address will not be published. Required fields are marked *
Comment *
Name *
Email *
Website
Save my name, email, and website in this browser for the next time I comment.
This site uses Akismet to reduce spam. Learn how your comment data is processed.
About CCNA-200-301
Learn CCNA 200-301. CCNA Routing & Switching: Acclaimed Cisco certification training.
Prepare for the 200-301 CCNA exam. Get a Free Access Now!
CCNA-200-301
Company
Blog
CCNA 200-301 Dumps
CCNA 200-301 Pack
Sections
IP Subnet Calculator
Contact
Android App
Spanish Version
Misc
Cookies Policy
Privacy Policy
Terms and Conditions
© Copyright CCNA-200-301