Professional Documents
Culture Documents
Working Tools
Working Tools
Working Tools
Working Tools
Everything from one source
BP_Anbauwerkzeu_DE.indd 1
Anbauw_nurText_DE_FR_EN.indd 1 13.04.2010
06.04.10
16:43:11
15:43
Uhr
Tool-System for a variety of jo
Liebherr working tools for excavators were designed as problem solvers for the most varied
applications. The carefully balanced program ranges from standard buckets for digging and
loading of loosened material to buckets for heavy-duty jobs in the mining industry with extreme
break-out forces and high wear and tear. Equipped with effective, to the relating ground match-
ing teeth the Liebherr digging tools provide a maximum productivity and longevity.
Productivity
Liebherr digging tools are particularly productive excavator components at
the very latest technological level. Special bucket shapes, permit maximum
transmission of power, provide the best penetration- and outstanding dig-
ging characteristics. Optimized bucket capacities and improved heap-cones
provide the best turn-over performance.
Dependability
Liebherr digging tools are in-house designed and manufactured. Specific
material selection, specialized heat treatment and lowest machining toler-
ances are utilized in order to achieve the especially toughness and the high
longevity. The convincing result: outstanding dependability under the most
severe job conditions.
Comfort
The careful and precise calibration of bucket shape and tooth selection pro-
vides the ideal digging tool for each job. The proven and reliable quick-change
system LIKUFIX permits the split-second, safe exchange of mechanical and
hydraulic attaching tools by the press of a button from the cab. LIKUFIX at-
taching tools also work on hydraulic excavators with Liebherr quick change
adapters without LIKUFIX - that means full flexibility and high comfort in
every situation.
Profitability
Liebherr digging tools provide a maximum of profitability. The Liebherr quick
change systems increase productivity especially in applications with varying
attaching tools. The 24/7 availability of wear parts and the easy exchange
procedure safe time and money as well. Because of the modular design, the
change systems and tools are very suitable for future tasks.
BP_Anbauwerk_bild_s34_35.indd 22
Anbauw_nurText_DE_FR_EN.indd 13.04.2010 16:43:11
11:31:50 Uhr
f jobs
BP_Anbauwerk_bild_s34_35.indd 33
Anbauw_nurText_DE_FR_EN.indd 13.04.2010 16:43:12
11:31:54 Uhr
Bucket options
Whether loose dirt, abrasive material or hard rock – quality and effectiveness of every
excavator job are affected by the targeted selection of the suitable bucket. Therefore,
Liebherr has designed a wide range of bucket options, which are especially suitable for an
applicable job due to the shape, material selection and technical fittings. Practical experi-
ence and continued attention to product development assure that Liebherr buckets are
always state-of-the-art technology.
BP_Anbauwerkzeu_DE.indd 4
Anbauw_nurText_DE_FR_EN.indd 4 13.04.2010
06.04.10
16:43:12
15:44
Uhr
Tiltable ditch- Tiltable
cleaning-bucket bucket
Rigid ditch-
cleaning-bucket
BP_Anbauwerkzeu_DE.indd 5
Anbauw_nurText_DE_FR_EN.indd 5 13.04.2010
06.04.10
16:43:12
15:44
Uhr
Backhoe buckets
Backhoe buckets are essential tools for Liebherr excavators. Due to their well
thought-out geometry, the weight optimized genuine buckets are well matched
to the Liebherr excavators. Good penetration characteristics and high productiv-
ity are the results.
BP_Anbauwerkzeu_DE.indd 6
Anbauw_nurText_DE_FR_EN.indd 6 13.04.2010
06.04.10
16:43:12
15:44
Uhr
Backhoe bucket with cutting edge Backhoe bucket with clip-on cutting edge
BP_Anbauwerkzeu_DE.indd 7
Anbauw_nurText_DE_FR_EN.indd 7 13.04.2010
06.04.10
16:43:12
15:44
Uhr
Various bucket shapes
starting R 934 and for large machines
Delta edge**
With the pointed V-shaped cutting lip and pull-up sin-
gle tooth at the center for difficult to break, layered ma-
terial. Optimal penetration characteristics for severe
ripping jobs.
V-delta edge**
With the trapezoidal cutting lip and pulled-up teeth in the
center for difficult to break, layered material. Optimal pe-
netration characteristics, low torsion due to center target,
limited floor maintenance capability.
L-shape
BP_Anbauwerkzeu_DE.indd 8
Anbauw_nurText_DE_FR_EN.indd 8 13.04.2010
06.04.10
16:43:12
15:44
Uhr
Bucket versions HD*
Additional back- (wear- and denting protection) and side
Standard* reinforcements, weld-on tooth adapters for excavator
Wear resistance cutting edge and bottom with weld-on jobs with a higher use. Suitable for digging and loa-
tooth adapter. Suitable for general utility, for digging and ding of harder and abrasive materials such as topsoil,
loading of matured and loosened but not abrasive materi- rock, sand/clay, sand/gravel and limestone with low to
al such as top soil, clay etc. medium quality.
HDV**
Additional back- and side reinforcement, weld-on tooth
adapter, reinforced cutting lip and additional wear parts.
Suitable for extreme excavator jobs such as quarry or
demolition, for digging and loading of mixed soil with
high share of rock and other abrasive material such as
rock, slag, quartz etc.
Standard
HD
HDV
BP_Anbauwerkzeu_DE.indd 9
Anbauw_nurText_DE_FR_EN.indd 9 13.04.2010
06.04.10
16:43:12
15:44
Uhr
The right tooth for every appl ic
The economic use of a hydraulic excavator is only possible if the tooth shape
matches the relating application. Liebherr offers a broad tooth program with tooth
shapes for every task.
10
BP_Anbauwerkzeu_DE.indd 10
Anbauw_nurText_DE_FR_EN.indd 10 13.04.2010
06.04.10
16:43:12
15:44
Uhr
pl ication
11
BP_Anbauwerkzeu_DE.indd 11
Anbauw_nurText_DE_FR_EN.indd 11 13.04.2010
06.04.10
16:43:12
15:44
Uhr
Buckets for special application
starting R 934
12
BP_Anbauwerkzeu_DE.indd 12
Anbauw_nurText_DE_FR_EN.indd 12 13.04.2010
06.04.10
16:43:13
15:45
Uhr
13
BP_Anbauwerkzeu_DE.indd 13
Anbauw_nurText_DE_FR_EN.indd 13 13.04.2010
06.04.10
16:43:13
15:45
Uhr
Tilt buckets and
ditch-cleaning-buckets
The proven tilt buckets of the Liebherr excavators are the all-rounders for professional humus
soil work and excavation. The rugged ditch cleaning buckets with patented tilt mechanism and
protected, inside mounted, cylinders in various cutting widths are utilized as effective tools for
grading and scarping.
Tilt bucket
Capacities of 0.5 - 2.0 m³, cutting widths of 1,200-1,800 mm also available in HD version
Applications
• Slope finishing
• Grading
• Excavation
• Loading trucks
Features
• Thick wear plate on bucket bottom
• 2 x 50° tiltable both sides
• Tilt cylinder installed protected
• Cutting edge available as an option
(serrated upon request)
Benefits
• Particularly suitable for various slope angles and excavation
Ditch-cleaning-bucket
Capacities from 0.28 – 2.40 m3, cutting widths from
1,200 mm – 2,400 mm
Applications
• Profile required digging of trenches
• Grading
• scraping and modeling of banks
• Garden- and landscaping work
Features
• tilt cylinder installed protected
• rigid or as an alternative 2 x 50° tiltable
• Standard back-cutting edge
• Bolt-on cutting edge available as an option
Benefits
• Particularly accurate grading work
• Optimal emptying in digging work
• Longevity due to protected cylinders
Tilt bucket – optional with bolt-on cutting edge Ditch-cleaning-bucket – optional with bolt-on cutting edge
14
BP_Anbauwerkzeu_DE.indd 14
Anbauw_nurText_DE_FR_EN.indd 14 13.04.2010
06.04.10
16:43:13
15:46
Uhr
15
BP_Anbauwerkzeu_DE.indd 15
Anbauw_nurText_DE_FR_EN.indd 15 13.04.2010
06.04.10
16:43:13
15:46
Uhr
Examples for individual solutio
Upon request Liebherr offers the suitable working tool for almost every application. The tools
are optimally matched to the excavator and consequently provide the highest digging perfor-
mances. Adapting to the many types of problems, our designers have developed individual
solutions in order to achieve optimal job results.
16
BP_Anbauwerkzeu_DE.indd 16
Anbauw_nurText_DE_FR_EN.indd 16 13.04.2010
06.04.10
16:43:13
15:46
Uhr
utions
4-in1 Bucket
Applications
• Utility and pipeline
• Back-fill work
• Inner city use
Features
• Shovel bucket function
• Pick-up of small material volume
possible (bottom-dump-bucket)
• Mountable directly to stick or to QC
Benefits
• Effective utilization of back-fill work due
to flexible operation
Marine Bucket
Applications:
• Dredging of channels
• Embankments
• Pipeline construction
Features
• Water drainage holes for optimal fill
factor
• Sealed bearings
• Dedicated teeth possible
Benefits
• Effective work under water, even
with difficult material
17
BP_Anbauwerkzeu_DE.indd 17
Anbauw_nurText_DE_FR_EN.indd 17 13.04.2010
06.04.10
16:43:13
15:46
Uhr
Hydraulic tilt-rotator
The Liebherr hydraulic rotation drive increases the utilization of an excavator many times.
Even under severe conditions, jobs are quickly and effectively accomplished with this modu-
lar adapter. The horizontally positioned tilt cylinder is well protected even at the maximum
tilt angle and has no extruding parts. Its particular features such as infinite rotation in both
directions, tilting at 2 x 50° and the quick-change system turn the hydraulic excavator into
a multi-purpose machine. In connection with Likufix the possibility exists to completely lay
aside the swing rotator with working tools and to pick up other tools.
Applications Benefits
• Challenging profiling • Increase of the productive worktime (accurate
• Pipeline excavation, precise backfilling and quick profiling)
• Complex digging work • Expanded utilization of the excavator
Features • Highly accurate due to easy handling
• 360° infinite rotation • Significant time savings since excavator needs
• best possible protection for tilt repositioning less often
and swing drive • Everything from one source
• Tiltable both sides by 50° • Liebherr excavator controls include tilt-rotator function
• Rugged design • Backhoe bucket can also be used as a face shovel
Tilt
± 50°
18
BP_Anbauwerkzeu_DE.indd 18
Anbauw_nurText_DE_FR_EN.indd 18 Hebel NEU 13.04.2010
06.04.10
16:43:13
15:46
Uhr
Protected cylinders, no extruding parts
19
BP_Anbauwerkzeu_DE.indd 19
Anbauw_nurText_DE_FR_EN.indd 19 13.04.2010
06.04.10
16:43:13
15:46
Uhr
Hydraulic tilt-rotator
The tilt-rotator is especially focused on the Liebherr hydraulic excavator and provides con-
sequently maximum productivity. Its particular superiority becomes obvious when working
in tight spaces as well as for grading and stripping of surfaces and slopes with obstacles.
All functions can be controlled from the operator station. Quick and accurate work, increased
safety and the drastic increase in productivity are the huge advantages of the Liebherr tilt-
rotator.
LH-TR 20 LH-TR 25
A 314 - A / R 900 -
Model classification
A / R 900 R 934
B 870 mm 880 mm
1)
LH-TR 20 with SW 33, LH-TR 25 with SW 48
B C
50°
20
BP_Anbauwerkzeu_DE.indd 20
Anbauw_nurText_DE_FR_EN.indd 20 13.04.2010
08.04.10
16:43:14
10:12
Uhr
21
BP_Anbauwerkzeu_DE.indd 21
Anbauw_nurText_DE_FR_EN.indd 21 13.04.2010
08.04.10
16:43:14
10:12
Uhr
Clamshells
Next to the backhoe bucket, the clamshell is one of the most important digging tools in the
utility business. The clamshell selection is based on the ground condition, the specific mate-
rial weight and the required production performance. The selection of the entire
clamshell attachment is significant in order to determine the required digging depth.
Clamshell
Capacities from 0.1– 2.0 m3, shell width from 300 –2,000 mm
Applications
• Narrow and deep trench digging, also over the side
• Loading and unloading and handling of various bulk goods,
respectively
• Excavation
• Special excavating (e.g. round shells)
Features
• Infinite rotation
• Optimally matched to machine size
• Rugged design
• Protected cylinder
• Depending on application with or without teeth
• Optional ejectors for digging shells available
• HD-version for severe jobs
• Quick-change system applicable
• Grab extension available as an option
Benefits
• Accurate and secure placement of material of
all type due to maneuverability and high closing
force
• Optional different shell width adaptable
to one mechanism
• Well-thought-out design with
Liebherr components
22
BP_Anbauwerkzeu_DE.indd 22
Anbauw_nurText_DE_FR_EN.indd 22 13.04.2010
08.04.10
16:43:14
10:12
Uhr
Round-hole grab
23
BP_Anbauwerkzeu_DE.indd 23
Anbauw_nurText_DE_FR_EN.indd 23 13.04.2010
08.04.10
16:43:14
10:12
Uhr
Liebherr
quick coupling system
Mechanical and hydraulic quick coupler
Mechanically Hydraulically
24
BP_Anbauwerkzeu_DE.indd 24
Anbauw_nurText_DE_FR_EN.indd 24 13.04.2010
06.04.10
16:43:14
15:48
Uhr
730 kg +730 kg
25
BP_Anbauwerkzeu_DE.indd 25
Anbauw_nurText_DE_FR_EN.indd 25 13.04.2010
06.04.10
16:43:14
15:48
Uhr
LIKUFIX, Tool-Control
and Tool-Management
LIKUFIX
LIKUFIX is a hydraulic coupler combined with an automatic hydraulic coupling system,
which was developed by Liebherr. LIKUFIX enables hydraulic excavators a quick and safe
change of mechanical and hydraulic attaching tools from the cab.
Tool-Control
Tool-Control is an additional electro-hydraulic function, which makes working with hydrau-
lic working tools very comfortable: up to 10 combinations of oil flow and pressure can be
programmed under the tool designation and selected directly from the display. The opera-
tor simply selects with Tool-Control with the push of a button the desired hydraulic tool –
without an elaborate new adjustment with a tool change.
Tool-Management
Tool-Management allows the automatic tool recognition through the hydraulic excavator.
With the reading device on the LIKUFIX block the data stored in the chip of the working tool
is being read and transmitted to the operator‘s cab. With the press of a button the operator
confirms the takeover of data and therefore the automatic setting of oil flow and oil pressure.
Aside from this data oil grade and working hours are being stored on the chip as well.
Moving to the unit Coupling into the unit Connected to the unit, mechanically and hydraulically
26
BP_Anbauwerkzeu_DE.indd 26
Anbauw_nurText_DE_FR_EN.indd 26 13.04.2010
06.04.10
16:43:14
15:49
Uhr
Liebherr Tool-Control Adapting plate for foreign tools
27
BP_Anbauwerkzeu_DE.indd 27
Anbauw_nurText_DE_FR_EN.indd 27 13.04.2010
06.04.10
16:43:14
15:49
Uhr
Pipe-laying tool
The pipe-layer developed by Liebherr enables significant productivity increase when laying
sewage pipes. The pipe is picked up, positioned at the end of a pipe already in place, aligned
and inserted into the previously installed pipe in accordance with existing standards using
a horizontal ram. The pipe-layer enables quick and efficient installation of pipes of various
lengths, diameters, weights, materials and nominal sizes. Thanks to this system, operational
safety on pipe-laying sites is raised considerably, since no one is forced to remain in the dan-
ger area.
Applications
• Sewage construction
• Pipe-laying jobs
• Highway construction
• Development
Features
• for pipes up to a length of 3.50 m
• Pipes with outer diameter of 450 mm up to 800 mm installable
• Pipes up to 230 mm outer diameter can be installed as an option
• Curb weight appr. 1,400 kg
• Lift capacity: approx. 1,500 kg
• Solid construction
• 360° endlessly turnable
• Adapter for plastic pipes deliverable
• with LIKUFIX or universal adapter
• Pipe feed: manual changeover on unit, alternatively from the operator’s cab
• suitable for excavators starting A / R 900
Benefits
• Excellent pipe-laying performance
• Operation in accordance with existing standards
• adjustable insertion pressure, thus less pipe damages
• simple and quick unloading of delivered pipes
• Excellent operational safety, no person permanently in the direct danger zone
• Minimum 10% productivity increase
• Pipes can be layed from any direction and independent from any incline
• Space saving in confined spaces: the Liebherr pipe laying unit hardly needs
more space than the pipe itself
Position Align
28
BP_Anbauwerkzeu_DE.indd 28
Anbauw_nurText_DE_FR_EN.indd 28 13.04.2010
06.04.10
16:43:14
15:50
Uhr
Insert
29
BP_Anbauwerkzeu_DE.indd 29
Anbauw_nurText_DE_FR_EN.indd 29 13.04.2010
06.04.10
16:43:14
15:50
Uhr
Liebherr demolition
and sorting grapples
Sorting grapples were developed especially with the require-
ments of demolition and recycling in mind. Clamshell buckets
are used for sorting, loading and demolition itself. Equipped
with an endless slewing device, they are extremely effective,
universally applicable attachments.
Sorting grapple
• Content up to 1.30 m3
Job reports
• Sorting operations in recycling plants
• Demolition work
• Quarry and waterway construction work
Features
• Solid Liebherr components
• Optimum own weight
• Easy maintenance and service-friendly
• Sealed bearing points
• Optimum lubrication system
• Endless hydraulic slewing device
Benefits
• High closing force
• Lightweight construction
• Highly sensitive in sorting work
• Different tine shapes for individual applications
Sorting grapple
30
BP_Anbauwerkzeu_DE.indd 30
Anbauw_nurText_DE_FR_EN.indd 30 13.04.2010
06.04.10
16:43:15
15:51
Uhr
31
BP_Anbauwerkzeu_DE.indd 31
Anbauw_nurText_DE_FR_EN.indd 31 13.04.2010
06.04.10
16:43:15
15:51
Uhr
Material classification
(accord. to DIN 18300)
Specific weight
Specific weight
Specific weight
Specific weight
Swell factor %
Swell factor %
kg/m3/bank 1)
kg/m3/bank 1)
kg/m3/loose
kg/m3/loose
Swell factor
Swell factor
Material Material
Clay natural bed 2,020 22 0.82 1,660 Weathered material -
dry 1,840 24 0.80 1,480 75% rock, 25% dirt 2,790 42 0.70 1,960
wet 2,080 24 0.80 1,660 50% rock, 50% dirt 2,280 33 0.75 1,720
Clay with gravel dry 1,660 17 0.86 1,420 25% rock, 75% dirt 1,960 24 0.80 1,570
wet 1,840 19 0.84 1,540 Basalt 2,970 52 0.66 1,960
Topsoil 1,370 44 0.69 950 Bauxite, Kaolin 1,900 33 0.75 1,420
Natural stone crushed 2,670 67 0.60 1,600 Topsoil dry compact 1,900 26 0.79 1,510
Sand dry loose 1,600 12 0.89 1,420 wet loosened 2,020 26 0.79 1,600
moist 1,900 12 0.89 1,690 Clay 1,540 23 0.81 1,250
wet 2,080 13 0.88 1,840 Gypsum broken 3,170 75 0.57 1,660
Sand with clay loose 2,020 26 0.79 1,600 crushed 2,790 68 0.60 1,670
compacted - - - 2,400 Granite broken 2,730 64 0.61 1,660
Sand with gravel dry 1,930 12 0.89 1,720 Limestone broken 2,610 69 0.59 1,540
wet 2,230 10 0.91 2,020 crushed - - - 1,540
Limestone 2,520 67 0.60 1,510 Gravel moist 2,170 12 0.89 1,930
Slag broken 2,940 68 0.60 1,750 dry 1,690 12 0.89 1,510
1) The actual values depend upon moisture content, grain size and compaction.
Tests are required to determine exact material characteristics.
32
BP_Anbauwerkzeu_DE.indd 32
Anbauw_nurText_DE_FR_EN.indd 32 13.04.2010
06.04.10
16:43:15
15:52
Uhr
Class 1: Top soil
Top soil is the most upper layer of the ground, which contains besides in-
organic matters, e.g. gravel-, sand-, silt- and clay mixes as well as humus
and organic organisms.
Basis of calculation
Each material, extracted from its natural position
whether by blasting or other means, grows in volume.
This increase in volume is measured in % or is given
as a ratio.
100%
Swell factor =
100% + swelling
33
BP_Anbauwerkzeu_DE.indd 33
Anbauw_nurText_DE_FR_EN.indd 33 13.04.2010
06.04.10
16:43:16
15:52
Uhr
Hydraulic excavator - short summ
Liebherr quick coupler adapter sizes
22 33 48 66 77 92 105
QC Mechanical • • • • •
systems
coupling
Quick
QC Hydraulic • • • • • •
LIKUFIX • • • •
A 309 M M/H/L
A 311 M M/H/L
A 312 M/H/L M/H/L
R 313 M/H/L M/H/L
A 314 M/H/L M/H/L
Liebherr hydraulic excavator models
A 309 / A 311 • • • •
A 312 • • • • •
R 313 • • • • • • •
A 314 • • • • • • •
A 316 • • • • • • •
R 317 • • • • • • •
A / R 900 • • • • • • •
A 904 • • • • • • •
R 906 Advanced / Classic • • • • • • •
A 914 • • • • • • •
R 916 Advanced / Classic • • • • • • •
A 924 / A 924 Plus • • • • • • •
R 924 Compact • • • • • • •
R 926 Advanced / Classic • • • • • • •
R 934 • • • • • •
R 944 • • • • • • •
R 954 • • • •
R 964 • • • •
R 974 • • • •
34
BP_Anbauwerk_bild_s34_35.indd 34
Anbauw_nurText_DE_FR_EN.indd 34 13.04.2010
13.04.2010 16:43:17
9:22:31 Uhr
ummary of mounting possibilities
Bucket A 309 - R 906
A 309 / A 311 with SW 33 A 312 / R 313 / A 314 with SW 48 1)
mm m3 kg m3 kg m3 kg mm m3 kg m3 kg m3 kg
3003) 0.15 160 0.15 150 - - 3003) 0.17 270 0.18 260 0.17 300
4003 ) 0.20 190 0.21 180 - - 400 ) 3
0.24 290 0.26 280 0.24 320
450 0.20 170 0.21 160 - - 5003) 0.32 280 0.34 270 0.32 320
550 0.22 190 0.24 190 - - 650 0.36 300 0.39 290 0.36 340
650 0.27 210 0.30 210 - - 850 0.50 350 0.53 340 0.50 400
750 0.33 230 0.35 220 - - 1,050 0.65 400 0.71 390 0.65 450
850 0.38 240 0.42 240 - - 1,250 0.80 450 0.87 430 0.80 510
950 0.44 270 0.48 270 - - - - - - - - -
A 312 / R 313 / A 314 with SW 33 1)
A 316 / A 900 / R 317 / R 900 with SW 48
3003) 0.17 220 0.18 210 0.17 250 3003) 0.17 270 0.18 260 0.17 300
4003) 0.24 250 0.26 240 0.24 280 4003) 0.24 290 0.26 280 0.24 320
500 0.28 250 0.30 240 0.28 280 5003) 0.32 290 0.34 280 0.32 330
550 0.29 260 0.31 250 0.29 290 650 0.45 400 0.45 380 0.45 440
650 0.36 290 0.39 270 0.36 320 850 0.60 430 0.65 410 0.60 480
850 0.50 340 0.53 320 0.50 380 1,050 0.80 510 0.85 490 0.80 570
1,050 0.65 380 0.71 370 0.65 430 1,250 0.95 560 1.05 530 0.95 630
1,250 0.80 430 0.87 420 0.80 490 - - - - - - -
A 316 / A 900 / R 317 / R 900 with SW 33 A 904 / R 906 with SW 48
3003) 0.17 220 0.18 210 0.17 250 650 0.55 510 0.60 430 0.55 570
4003 ) 0.24 250 0.26 240 0.24 280 850 0.60 550 0.65 590 0.60 620
500 0.30 290 0.32 270 0.30 320 1,050 0.80 630 0.85 670 0.80 710
650 0.45 350 0.45 330 0.45 390 1,250 1.00 730 1.05 770 1.00 820
850 0.60 400 0.65 380 0.60 450 1,400 1.15 790 1.20 840 1.15 880
1,050 0.80 480 0.85 460 0.80 540 - - - - - - -
1,250 0.95 520 1.05 500 0.95 590 - - - - - - -
The attaching tool permitted for the corresponding machine configuration you can see from the relating excavator brochure.
1) HD-bucket for A312 not available 2) HD-version also available with cutting edge 3) Backhoe bucket with limited digging depth
35
BP_Anbauwerk_bild_s34_35.indd 35
Anbauw_nurText_DE_FR_EN.indd 35 13.04.2010
13.04.2010 16:43:18
9:22:36 Uhr
Backhoe bucket A 914 - R 926
R 924 Compact with SW 48
Width Teeth Cutting HD
edge (with teeth)1)
mm m3 kg m3 kg m3 kg
650 0.55 510 0.60 430 0.55 570
850 0.60 550 0.65 590 0.60 620
1,050 0.80 630 0.85 670 0.80 710
1,250 1.00 730 1.05 770 1.00 820
1,400 1.15 790 1.20 840 1.15 880
36
BP_Anbauwerkzeu_DE.indd 36
Anbauw_nurText_DE_FR_EN.indd 36 13.04.2010
06.04.10
16:43:19
15:52
Uhr
Tiltable and ditch-cleaning-bucket with SW 33, A 309 - R 900
A 309 with SW 33
Width Tiltable ditch- Rigid ditch- Tilt bucket2)
cleaning-bucket2) cleaning-bucket
mm m3 kg m³ kg m³ kg
37
BP_Anbauwerkzeu_DE.indd 37
Anbauw_nurText_DE_FR_EN.indd 37 13.04.2010
06.04.10
16:43:19
15:52
Uhr
Tiltable and ditch-cleaning-bucket with SW 48, A 312 - R 926
A 312 / A 314 / R 313 mit SW 48
Width Tiltable ditch- Rigid ditch- Tilting bucket1)
cleaning-bucket1) cleaning-bucket
mm m3 kg m3 kg m3 kg
38
BP_Anbauwerkzeu_DE.indd 38
Anbauw_nurText_DE_FR_EN.indd 38 13.04.2010
06.04.10
16:43:20
15:52
Uhr
Tiltable and ditch-cleaning-bucket with R 934 - R 974
R 934 / R 944
Width Tiltable ditch- Rigid ditch- Tilting bucket1)
cleaning-bucket1) cleaning-bucket
mm m3 kg m3 kg m3 kg
- - - - 1.45 1,526
1,600
- - - - 1.75 1,634
- - - - 1.60 1,621
1,800
- - - - 2.00 1,747
The attaching tool permitted for the corresponding machine configuration you can see from the relating excavator brochure.
1) 2 x 50° tiltable
39
BP_Anbauwerkzeu_DE.indd 39
Anbauw_nurText_DE_FR_EN.indd 39 13.04.2010
06.04.10
16:43:21
15:52
Uhr
Clamshell
B C D E
Width Opening Heigth Heigth Span width Capacity Weight
open closed
GM5 B mm mm mm mm mm m3 kg
300 1,195 1,070 1,400 1,343 0.10 410
400 1,195 1,070 1,400 1,343 0.13 440
600 1,195 1,070 1,400 1,343 0.20 470
800 1,195 1,070 1,400 1,343 0.27 510
GM8 B
320 1,520 1,990 2,420 1,645 0.17 710
400 1,520 1,990 2,420 1,645 0.22 750
600 1,450 1,920 2,385 1,575 0.30 750
800 1,450 1,920 2,385 1,575 0.40 800
GM10 B
320 1,530 2,685 2,440 1,697 0.17 770
400 1,530 2,685 2,440 1,697 0.22 820
600 1,530 2,685 2,440 1,697 0.35 860
800 1,530 2,685 2,440 1,697 0.45 910
1,000 1,530 2,685 2,440 1,697 0.60 970
Wheeled Excavator A 309 A 311 A 312 A 314 A 316 A 900 C A 904 C A 914 C A 924 C
Grab mechanism 5B 5B 8B 8B 8B 8B 10 B 10 B 10 B
Grab mechanism 10 B 10 B
Clamshell E
40
BP_Anbauwerkzeu_DE.indd 40
Anbauw_nurText_DE_FR_EN.indd 40 13.04.2010
06.04.10
16:43:21
15:52
Uhr
Sorting grapples
A B C D
Capacity Weight Shell Closing Heigth Heigth Width Width
width force open closed open closed
SG-25 m3 kg mm t mm mm mm mm
0.50 1,000 800 6 1,340 1,470 1,970 1,370
Corrugated
0.50 1,080 1,000 6 1,340 1,470 1,970 1,370
0.55 990 800 6 1,340 1,470 1,970 1,370
Perforated
0.75 1,070 1,000 6 1,340 1,470 1,970 1,370
SG-30
0.75 1,510 1,000 8 1,485 1,625 2,140 1,515
Corrugated
0.90 1,590 1,150 8 1,485 1,625 2,140 1,515
0.85 1,490 1,000 8 1,485 1,625 2,140 1,515
Perforated
1.00 1,570 1,150 8 1,485 1,625 2,140 1,515
SG-40
1.10 2,320 1,100 10 1,740 1,920 2,560 1,790
Corrugated
1.30 2,360 1,200 10 1,755 1,945 2,605 1,815
Perforated 1.30 2,230 1,100 10 1,740 1,920 2,560 1,790
Standard Longfront
Wheeled Excavator A 314 A 316 A 900 A 904 A 914 A 924
Crawler Excavator R 313 R 317 R 900 R 906 R 916 R 926 R 934 R 944 R 954 R 934 R 944 R 954 R 974
SG-25 G J J G J G
SG-30 G J J J G • J J J
SG-40 G G J J G • •
B
A
D
C
41
BP_Anbauwerkzeu_DE.indd 41
Anbauw_nurText_DE_FR_EN.indd 41 13.04.2010
06.04.10
16:43:22
15:52
Uhr
Liebherr U tooth system
Elements Tooth size
U25-2 U35-3
Tooth holder • •
Pointed • •
Tooth shape Standard • •
HD • •
Roll pin • •
Cotter pin driver • •
• available
- not available
Wheeled Excavator A 309 A 311 A 312 A 314 A 316 A 900 A 904 A 914 A 924
R 924
Crawler Excavator R 313 R 317 R 900 R 906 Compact R 916 R 926 R 934 R 944 R 954 R 964 R 974
U
Tooth system Liebherr U tooth system Liebherr Z tooth system
Z
42
BP_Anbauwerkzeu_DE.indd 42
Anbauw_nurText_DE_FR_EN.indd 42 13.04.2010
06.04.10
16:43:22
15:52
Uhr
Liebherr Z tooth system
Elements Tooth size
35 40 50 70 90
Tooth holder
• • • • •
Standard
Tooth holder
Single bracket *
• • - - -
Wear cap
for tooth holder
- - • • •
C • • • • •
CL • • • • •
P • • • • •
Tooth form
PF • • • - -
CR - - - • •
R
(starting end of 2010) - • • • •
Safety pin • • • • •
Blocking device • • • • •
Locking system
Locking key • • • • •
Protecting plug • • • • •
C • • • • •
CL • • • • •
Conversion kit P • • • • •
Adapter
Standard PF • • • - -
CR - - - • •
R
(starting end of 2010) - • • • •
C • • - - -
CL • • - - -
Conversion kit P • • - - -
Adapter
Single bracket PF • • - - -
CR - - - - -
R
(starting end of 2010) - • - - -
• available
- not available
43
BP_Anbauwerkzeu_DE.indd 43
Anbauw_nurText_DE_FR_EN.indd 43 13.04.2010
06.04.10
16:43:23
15:52
Uhr
The Liebherr Group of Companies
www.liebherr.com
Printed in Germany by Eberl LFR-10330341-3-03.10 All information supplied without liability Subject to technical modifications.