Professional Documents
Culture Documents
SparGauge Version History
SparGauge Version History
GEOPHYSICAL INSTRUMENTATION
• Since this is the initial release of .Net version of SparGauge, we highly recommend that you uninstall
all older versions of SparGauge from your system.
• Uninstalling older versions of SparGauge from your system ensures that you are running with the
latest security and performance improvements bring by this .Net version.
SparGauge v1.6.0
Bug Reports and fixes
• Added increased resolution to Range selection with new cal file format.
• Memory Redundancy for 1227 completed.
• All SparPTA zoom functions removed. Rewrite in progress
• Fixed bug in reading new cal file format.
• Fixed bug related to setting serial number on AC Line Card
• I18n changes for Russian Windows
• Fixed problem with forcing re-compensation with another cal file
• SPG File bug fixed.
• Exposed dialog to allow setting power on AC Line Card.
• ASCII import completed.
• Added tool 1234. 3v Digital Quartz.
• ASCII Reader modified to read CoreDAQ data, including multiple entries.
• Fixed bug related to range control in new compressed format. 66763/197816/132284
• Changed Status decode structure for 1196 WHR’s
• Added curve colors and fixed short names to import utility.
• Added rejection of reverse time fields and irregular time decodes.
• Bug fixed 1196 not reading in Temp curves correctly.
• Color added to raw curves.
• Restructured re-compensate SDR file
• Status now reflects state of main puck during record mode not most recent state
• Temperature range – unsigned char change
• New output file for WHDR to break down event table.
• Fixed bug with regard to WHDR start time.
• Restructured WHDR SDR file creation code.
• Added download Firmware capability to Master, and AC cards.
• Fixed Temperature Range bug signed v unsigned byte .
• Master Card on CoreDAQ Firmware Updater completed .
SparGauge v1.5.0
Bug Reports and fixes
• Bug fix.
• Beta Release made to field district for testing
• SPSRO multiple gauge support – new interface
SparGauge v1.4.0
Bug Reports and fixes
• See incremental changes below from last release
New Tool Additions
• 1196 F3 – Introduced new timing decode for WHDR
SparGauge v1.3.0
Bug Reports and fixes
• Time correction overflow corrected - first detected on 1208 F1.
• Fixed problem with launch when no USB driver installed. - DLL not detected.
Additional Functionality
• CoreDAQ – Units change capability added to all cards.
• 1196 - Surface Well Head Recorder - added firmware upgradability to all programmable elements.
New Tool Additions
• 1208 F1 – added calibration capability for timing crystal.
• 1196 F0 – pre-release
SparGauge v1.2.0
Bug Reports and fixes
• A problem with the display and interaction with the buttons on the CoreDAQ panel was traced to an
erase sequence not completing correctly when programming the display pages. This issue was
resolved.
Additional Functionality
• Improved GUI for configuring the CoreDAQ interface. Added a Utility section to simplify the
programming of the instrument.
• Added a new interface to configure and edit the CoreDAQ display pages.
• Added a feature to label the Line Card Tabs with their relevant numbers.
• Added Export ASCII of time – depth data.
New Tool Additions
• None
SparGauge v1.1.7
Bug Reports and fixes
• None
Additional Functionality
• Increased the number of significant digits displayed in the Curve Scaling function (Edit Primary Data
Set).
• Added a new GUI, “Apply TCXO Coefficient”, which allows the users to correct of small errors in the
frequency of the quartz timing crystal (used to maintain data sampling).
New Tool Additions
• 1196 New Well-Head Recorder Support
• 1212 New Hybrid Sapphire Support
SparGauge v1.1.6
Bug Reports and fixes
• 1171 Download issue. Increased timeout value for 230Kb upload
Additional Functionality
• None.
New Tool Additions
• None
SparGauge v1.1.5
Bug Reports and fixes
• CoreDaq Control register issue with Bit 31 fixed
Additional Functionality
• Added 1208 Hybrid Memory Test.
• Added new WHR Power on Reset Reader
New Tool Additions
• 1208F1 New Quartz Gauge with hybrid memory – extend 1171 Functionality
SparGauge v1.1.4
Bug Reports and fixes
• None
SparGauge v1.1.3
Bug Reports and fixes
• None
Additional Functionality
• Flask Tool PCB calibration enhanced. Moved coefficients to EEPROM storage
• Added 1029 SRO box programming feature to allow “on fly” programming without pre-erase.
New Tool Additions
• 1139 F6 – Permanent Tool – no memory
SparGauge v1.1.0
Bug Reports and fixes
• Problem discovered with ADO. Locking a table was intermittent.
Additional Functionality
• None
New Tool Additions
• None