Professional Documents
Culture Documents
AcuDC 240 DC Power and Energy Meter Datasheet
AcuDC 240 DC Power and Energy Meter Datasheet
AcuDC 240 DC Power and Energy Meter Datasheet
DESCRIPTION FEATURES
The AcuDC 240 is a DC energy meter + 0.2% accuracy on voltage + Equip with a variety of I/O
designed to monitor and control DC and current; 0.5% on power options including Analogue
power systems with a wide range of and energy Output, Analogue Input,
+ Optional data logging with Relay Output or Digital
measurement parameters such as
adjustable log size Output
voltage, current, power and energy.
+ Optional RS485 Modbus- + Standard 72mm x 72mm
Ideal for renewable energy applications,
RTU communications DIN size for drawer-type
it supports bi-directional current
panel installation
measurement used in net metering, + Compatible with DC current
solar PV, and wind turbine power sensors, DC voltage sensors,
generation as well as other applications Hall effect sensors, & shunts
such as transportation systems,
telecommunications, and power
distribution systems.
APPLICATIONS
+ DC Energy Management
Systems
+ Renewable Energy
+ Data Centers
Voltage V
Current I
Metering Power P
Energy E
Ampere-hour Ah
X1: 2DI+2AO (4~20mA/0~20mA)
X2: 2DI+2AO (0-5V/1-5V)
X3: 2DI+2RO
I/O X4: 2DI+2DO Support DI count
X5: 2DI+±15Vdc
X6: 2AI±15Vdc (4~20mA/0~20mA)
X7: 2AI±15Vdc (0~5V/1~5V)
All metering parameters can be recorded (Voltage, Current, Power, Energy, Ampere-hour, DI Count);
Datalogging Interval 1 minute; Can record 4 months
Communication RS485 , Modbus RTU
Display LCD
Dimension 72.0 × 72.0 × 64.5mm (Cutout: 68.0×68.0 mm) / 2.84 × 2.84 × 2.54 inch (Cutout: 2.68 × 2.68 inch)
2.68" (68.0mm)
2.64" (67.0mm)
2.84" (72.0mm)
Cut-Out
2.58" (65.5mm)
0.71" (18.0mm)
0.27" (6.8mm)
0.28" (7.8mm)
0.28" (7.8mm)
0.28" (7.8mm)
0.28" (7.8mm)
Front View Side View Back View
6 I
- 1 U+
-
AcuDC 240 AcuDC 240 AcuDC 240
5 I+ 3 U
Load
Voltage Wiring using Voltage Hall Effect Sensor* Voltage & Current Direct Wiring Voltage & Current Wiring using Shunt*
IN+
_
+
±15 External
DC Power
G
AcuDC 240
1 U+ 1 U+
-
M 1 U+ 3 U- 3 U-
IN-
Shunt 75mV
AcuDC 240 AcuDC 240
-
G 3 U- 5 I+ 6 I
6 I 5 I+
Load Load
Voltage & Current Wiring using Voltage & Current Wiring Digital Input
Current Hall Effect Sensor** using Hall Effect Sensors**
_
Vdc+ Vdc-
Vdc+ Vdc- AcuDC 240
_
1 U+ IN+ G
_
3 U- IN- M
±15 External 1 U+ S1
Digital Input
DC Power 18
+ G 3 U-
G AcuDC 240 ±15 External
Current Hall
DC Power
19
-
AcuDC 240
Current Hall
M 5 I+ G S2
-
20
G 6 I M 5 I+
G 6 I
Load
Load External DC Power
Analogue Output 4~20mA, R<500Ω External Power Supply < 250Vac or 30Vdc I < 3A Power Supply Wiring
21
AO1- AO1+ AO2- AO2+
21
Relay Output
R12
22
Analogue Output
Intermediate Relay
22
External Resistor R
R21 R22
23
AC / DC
23
24
24
External Resistor R
ORDERING INFORMATION
Power Supply
+ Meter Model - Voltage Option - Current Option - - I/O Option - Communication - Datalogging
Option
1000V: Nominal P1: 100-240Vac
AcuDC 243: NC: No ND: No
Input Voltage A0: 0~±10A 50/60Hz, X0: No I/O
Multifunction Communication Datalogging
1000Vdc 100-300Vdc
600V: Nominal X1: 2DI+2AO C: RS485,
A1: Shunt (50~100mV) P2: 20-60Vdc D: Datalogging
Input Voltage 600Vdc (4~20mA/0~20mA) Modbus RTU
300V: Nominal A2: Current Hall
X2: 2DI+2AO
Input Voltage Effect Sensor
(0~5V/1~5V)
300Vdc (4~20mA/12mA±8mA)
60V: Nominal Input A3: Voltage Hall Effect
X3: 2DI+2RO
Voltage 60Vdc Sensor (0~±5/0~±4V)
5V: Via Hall Effect
Sensor (0-5V/0-4V), X4: 2DI+2DO
ratio settable
Note: When the input voltage is above 1000V, or the system design
+ Accessories (Optional) requires an isolation sensor, the voltage input can be selected as
Via Hall Effect Sensor (0~5V). The Voltage Hall Effect Sensor output
USB-RS485: USB-to-RS485 Converter
range requires 0~5V.
DC-DIN: DIN Rail Mounting Accessory
Ordering Example: USB-RS485