Professional Documents
Culture Documents
08 Daftar Pustaka
08 Daftar Pustaka
B G Naresh Kumar, Punith N, Bhyrav Raj B, & Arpitha T P. (2017). Assessment of Location
of Centre of Mass and Centre of Rigidity for Different Setback Buildings. International
Journal of Engineering Research And, V6(05).
https://doi.org/10.17577/ijertv6is050488
Badan Standardisasi Nasional. (2019). SNI 1726-2019. Tata Cara Perencanaan Ketahanan
Gempa Untuk Struktur Bangunan Gedung Dan Non Gedung, Jakarta, Indonesia.
Badan Standardisasi Nasional. (2019). SNI 2847:2019. Persyaratan Beton Struktural untuk
Bangunan Gedung dan Penjelasan. Jakarta, Indonesia.
Badan Standardisasi Nasional. (2020). SNI 1727-2020 Beban desain minimum dan kriteria
terkait untuk bangunan gedung dan struktur lain. Jakarta, Indonesia.
Botis, M. F., & Cerbu, C. (2020). A method for reducing of the overall torsion for reinforced
concrete multi-storey irregular structures. Applied Sciences (Switzerland), 10(16).
https://doi.org/10.3390/app10165555
Botis, M. F., Cerbu, C., & Shi, H. (2018). Study on the reduction of the general / overall
torsion on multi – story, rectangular, reinforced concrete structures.
Budiono, B., & Malau, R. P. (2013). Evaluasi Kinerja Seismik Struktur Gedung Asimetris
dengan Dinding Geser Nonparalel Sebagai Sistem Pengekangan Torsi. Jurnal Teknik
Sipil, 20(3), 173. https://doi.org/10.5614/jts.2013.20.3.2
Computers and Structures Inc. (2017). ETABS 2018 Software: Vol. Version 18.
Divyashree, M., & Siddappa, G. (2014). Seismic Behavior of RC Buildings with Re-entrant
Corners and Strengthening. IOSR Journal of Mechanical and Civil Engineering, 2278–
1684. www.iosrjournals.org
Hussein, G., & Eid, N. (2020). Torsional Behavior of Irregular Structures during
Earthquakes. January. https://doi.org/10.9790/1684-1605044055
Kewalramani, M. A., & Syed, Z. I. (2018). Seismic analysis of torsional irregularity in multi-
storey symmetric and asymmetric buildings. Eurasian Journal of Analytical Chemistry,
13(3), 286–292.
https://doi.org/10.3390/civileng2020016
Ngenge, J. P. L., & Wafi, A. M. S. (2020). Assessment of plastic hinge in RC structures with
and without shear walls applying pushover analysis. International Journal of Advanced
Engineering, Sciences and Applications, 1(1), 11–18.
https://doi.org/10.47346/ijaesa.v1i1.27
Pelletier, K., & Léger, P. (2017). Nonlinear seismic modeling of reinforced concrete cores
including torsion. Engineering Structures, 136, 380–392.
https://doi.org/10.1016/j.engstruct.2017.01.042
Roeslin, S., Ma, Q. T. M., & García, H. J. (2018). Damage assessment on buildings following
the 19th september 2017 puebla, Mexico earthquake. Frontiers in Built Environment,
4(December), 1–18. https://doi.org/10.3389/fbuil.2018.00072
Ruggieri, S., & Uva, G. (2020). Accounting for the spatial variability of seismic motion in
the pushover analysis of regular and irregular rc buildings in the new italian building
code. Buildings, 10(10), 1–22. https://doi.org/10.3390/buildings10100177
Sekhar, S. (2017). Seismic vulnerability of RC frames with re-entrant corners. June 2015.
https://doi.org/10.13140/RG.2.2.13560.44805