Professional Documents
Culture Documents
Subhan Ali API
Subhan Ali API
Subhan Ali API
Career A capable, highly motivated Inspection Personnel (Mechanical) having experience of 8.5Years
Summary plus with expertise in QA/QC and Asset Integrity Management activities (In-Service static
equipment inspection activities), seeks for challenging position in Petrochemical industry as an
Inspection engineer where extensive experience will be fully utilized and further developed.
Major Shutdown/Turnarounds :
• Annual Turnaround inspection of pressure vessels at Pakistan petroleum Addhifield 2018 as per API 510.
• Annual Turnaround inspection of pressure vessels at Pakistan petroleum Addhifield 2019 as per API 510.
• Annual Turnaround Inspection of pressure vessels at Byco petroleum 2020 as per API 510.
• Annual Turnaround inspection of Dehydration Unit at MPCL Daharki Sindh Pakistan 2021 as per API
510.
• Annual Turnaround Inspection of Contactor Towers & Three Phase Test Separators at MOL Gas
Field Pakistan 2020 asper API 510.
• Annual Turnaround Inspection of High pressure Steam Line at General Electric Pvt.Ltd Pakistan 2021 as
per API 570.
• Annual Turnaround inspection of High Pressure Steam Line at Packages Bulleh Shah Qasoor
Pakistan 2021 as Per API570.
Major Projects:
• Eddy Current testing of Heat Exchangers & condensers at K-Electric Karachi Pakistan 2018 as NDE
examiner.
• Annual Turnaround Inspection of Heat Recovery Steam Generation system at UCH Power
Limited 2019. as NDEexaminer.
• Inspection of Buried Pipeline at Pakistan Petroleum Limited Sindh 2021. as per API 570.
• Annual turnaround inspection at Lotte Chemicals 2017 as NDT Inspector.
• Fit up inspection during fabrication of HSD tanks and associated tank farm piping.
• NDT witness during construction work as per applicable reference.
Experience as freelancer:
• Working as NDT inspector with Fatima Fertilize pvt. Ltd.
• Working as NDT inspector with Engro Polymerpvt.Ltd.
• Working as NDT inspector with Parco Mid Oil Refinery.
• Working as NDT Supervisor with Ramzan Sugar Mills.
• Working as QA/QC inspector with JES Engineering at Maari petroleum Sindh Pakistan.
• Working as QA/QC inspector with Engro foods Sahiwal Pakistan.
Summary of Responsibilities:
• Ensure all activities at site are performed in safe manner with compliance to Project
Specifications & all applicableQuality standards are implemented.
• Review of material test reports.
• Visual Inspection of weld joints as per applicable reference standards.
• Performing and supervising the inspection of Dye Penetrant test and MPI for static
equipment welding seams (shell todish end, shell to tube sheet joint.
• Witness Positive material identification (PMI) of raw material or incoming material.
• Conducting in service/Out of service inspections as per API-510, for pressure vessels.
• Assessment of Repair scope as an outcome of inspection and supervision/Authorizationof
repair work in compliance toapplicable inspection and construction code.
• Identification of Damage mechanisms as per API-571 for various equipment.
• Preparation and review of reports as per API-510.
• Raise Quality Alert or Non-Conformity Report on any non-compliance found duringwork.
• Conducting in service inspections of Pipelines as per API-570.
• Preparation and review of reports as per API 570.
• Review NDT results at site during data collection and rectify any major anomaly in results.
• Addressing Major inspection findings at site which are required immediatecorrective actions.
• Meeting with clients and clearing actual condition of assets on the basis ofprevious
inspection history and currentinspection evaluation.
• Assistance in Technical Bid submission and segregate client requirements.
• Working as third party inspection supervision on contractors which are acceptable to
the owner /user for repair andalteration work on static Equipment’s.
• Review work history/profile of repair organization for repair and alteration work.
• Proper communication channel with client and contractor for smooth execution of inspection
activities at hold points.
• Witness repair organization activities regarding repair / alteration method statement.
• Witness Hydrostatic /Pneumatic testing as per standard guidance of ASME codes and
agreement with owner/user forselecting test pressure range for pressure vessels
andpiping system.
• Witness of NDT application & results and recommend rework if any non-conformance is
found during interpretation andevaluation of results.
• Witness Correct filler material as per WPS & PQR specification.
• Witness WPS & PQR specifications and thickness ranges for repair workrepair/alteration work.
• Witness welder Qualification and also proper Workmanship utilize for repairand/alteration
work.
• Witness sequence of repair work as per owner/user and contractor agreement.
• Job safety analysis performed before start of job and as per actual job situation.
• Daily progress report of inspection activities submitted to client on daily basis.