Professional Documents
Culture Documents
Table 6 U3 A3 3d Design
Table 6 U3 A3 3d Design
Name of Project: kid table Name(s) of the persons on the Design Team: Mason
2. Project Rationale
3. Challenge Statement
The challenge was building the child’s table in tinker cad. doing the size of the table, the design of the
table,
4. Design Criteria
I still need to figure out the size of the table but in the end, I will figure it out.
5. Materials List all the materials (and costs) used in the fabrication of the prototype and/or final
product. Also list what tools and equipment will be needed to duplicate the prototype or produce the
product. Bill of Materials are available.
I made a bunch of Squares and turn them into rectangles and then I just added a star on top and then I
used some type of roller to measure both sides.
6. Drawings or Illustrations
Include all drawings and/or illustrations as part of your initial research, and possibilities for the
development and fabrication of the project. This includes rough sketches, technical drawings,
illustrations and/or photographs of models or products. Ensure all drawings are properly labeled and
descriptive.
7. References
8. Log Sheet (optional at this level – necessary for Level 4 plus achievement)
First I started with a simple and turn them into rectangles for legs then I put a table top no top of the
legs but I’m still trying to figure out the size.
the second day I put a star on top of the tabletop and put support beams under it.