Professional Documents
Culture Documents
Vinyl Project GR 10
Vinyl Project GR 10
Vinyl Project GR 10
Planning
I had to start planning about
what type of stickers I wanted
to make. And I wanted to make
my favorite car brands which
are ford and corvette. After
picking the stickers I want to
make I put them in a USB.
Inkscape and
Graphtec carve
program
• After planning I opened up Inkscape and put
in my logos from the USB. It was my first
time using this program and doing this
project, so I asked for a lot of help and
watched videos as I went on. Then I
exported those images from Inkscape to
Graphtec. Then after exporting the images
in Graphtec, I traced them. Then plugged in
the USB and hit send job to CE6000-60 Vinyl
Cutter. This process was a tough task for me
because sometimes it was hard to save images
in the USB or I made a lot of mistakes such as
adjusting the size of the image in Inkscape.
Inserting packing
tape
After using the Cricut I inserted
tape to the side of the logo. I had
to insert the tape properly
because this is an important
part.
Final product