Professional Documents
Culture Documents
HD406VRH ON&OFF Specification
HD406VRH ON&OFF Specification
15m
5
years
Mechanical structure
On/off Detection Hold Daylight Remote control 10-15M
control area time threshold setting Highbay
Ceiling Mounted
10 8 6 4 2 2 4 6 8 10 Wall Mounted
2 3 6 8 10 12 14 16 18
2 4
4 3
2
6
Mounting 1
8
height Mounting
10
height 1
12 Mounting bracket
2
14
3
16 4
A B C D
44
L Brown L
2*ø2.3 61.9
Blue N
44
Yellow L’
ø21.5
29
N
ø18.5
ø2
1.5
ø18
N L'
2xø2.3
ø18.5
ø18
LED Driver
3*ø2
ø21.5
53.3
.5
1.2
Load
1.5 63.1
A B 6 C D
ø80
0.8
4xø3 1.2
3xø2.5 38
9.4 70 94 M20
6
21
2xø6
25 41
44
18 77
90°
2xø6
Shenzhen Haisen Technology Co., Ltd., Tel: +86-755-82598105 丨Fax: +86-755-82598106丨Email: info@haisensz.com 丨www.haisensz.com Haisen Technology | 02
Application Attention
1. Automatically ON/OFF function 1. Please read the instructions carefully before using this product and keep it well
for all users to read at any time.
Light on when detect movement and off after people leave at night. Applications:
2. The sensor should be installed by qualified electrician and ensure power is off
Corridor, Staircase.
before the installation.
3. We reserve the right to modify any incorrect text, image and necessary technical
parameters.
Hold time
4. Any unauthorized modification is forbidden, otherwise all guarantees will be
immediately invalid.
Installation precautions
1. Microwave sensor can be installed in any lamp except the one with full metal shell.
2. The detected surface cannot be shielded by metal objects.
With sufficient daylight, With insufficient daylight, After the last detection 3. Make sure the microwave module is completely exposed outside.
even when motion when motion detected, and the present hold 4. The detection surface of the sensor module shall be installed facing the detection area.
detected, light remains light ON. time elapsed, light OFF. 5. Should be kept away from the driver to avoid interference generation and lamp flashing.
OFF.
6. Wiring must be strictly in accordance with the wiring diagram to avoid short circuit.
User Notes
1.Microwave can penetrate walls or glass thinner than 20cm and attenuate if thicker than 20cm.
2. The driver voltage shall be stable and float within 10%.
When motion is After people leave the 3. Detection area will be affected by speed of motion, mounting height and movement volume.
After the last detection
detected, the sensor will detection area, light and the present hold 4. Conduct test on sunny days without the lampshade which will affect the tested lux value
switch on the light to remains 100% brightness time elapsed, light OFF.
100% brighteness. within hold time.
Shenzhen Haisen Technology Co., Ltd., Tel: +86-755-82598105 丨Fax: +86-755-82598106丨Email: info@haisensz.com 丨www.haisensz.com Haisen Technology | 03
HD05R Remote Control Applications HD05R Instruction
ON/OFF
1. "ON/OFF" key only functions as a switch of the light. Memory & Apply Mode
2. If press this button to turn off the lamp before it's
short-circuited, the lamp will remain off after power-on
again. 1. Press "ON/OFF button" to turn on the light or off.
-
+ Increase or decrease the parameters.
Notes:
Daylight Threshold 1. Settings will be saved automatically and remain until you press reset again.
Definition of the ambient brightness; only when the 2. Light will flicker when setting each parameter.
ambient brightness is lower than the preset specific lux 3. The icon will flash when setting the corresponding parameter.
amount, the sensor will work; when it's preset as
"disable", the sensor works everytime it detects motion
regardless of the ambient lux level.
Detection Rarea
The area in which movement will trigger the sensor, 100%
detection area also means strong sensitivity.
Shenzhen Haisen Technology Co., Ltd., Tel: +86-755-82598105 丨Fax: +86-755-82598106丨Email: info@haisensz.com 丨www.haisensz.com Haisen Technology | 04