Professional Documents
Culture Documents
Silicon Mos Marking
Silicon Mos Marking
Silicon Mos Marking
Customer Number:
Customer Contact:
Name____________________________ Title________________________
Signature_________________________ Date________________________
Name___________________________ Title_______________________
Signature________________________ Date_________________________
FM -SOP-OP-015
Silicon Standard Product and Process Change Notification
Approved by: Joe Sanders 4/1/04 Page 1of 2
PROCESS CHANGE NOTIFICATION
Marking modifications :
A. This marking change was implemented because the previous SOT-23 marking
did not allow enough space for adequate date-code information and Pb-free
identification
B. Implementation date: January 1, 2004
C. Explanation of marking:
1. The 1st character represents the SOT-23 type:
N = SOT-23-3 MOSFET
R = SOT-23-3 shunt regulators
Y = SOT-23-6 MOSFET.
2. If underlined, the part has a Pb- free lead finish.
3. The 2nd character (1/2/3/4/5/6) is taken from the last letter of the previous
marking, and identifies the particular device.
4. The 3rd and 4th characters are alphanumeric characters used for lot/date code
identification
FM -SOP-OP-015
Silicon Standard Product and Process Change Notification
Approved by: Joe Sanders 4/1/04 Page 2of 2