Professional Documents
Culture Documents
Screw in Plug Type Connectors HX HL
Screw in Plug Type Connectors HX HL
Fittings
Overview version HX
Function
Connection fittings with plug-type connection are
used to be able to connect pipes at distributors and
lube points quickly and without tools.
Fittings
Technical data
Operating pressure: max. 250 bar*
Temperature rage: -20°C up to +80°C*
Lubricant*: oil
fluid greases NLGI cl. 000-00
greases up to NLGI cl. 2
Material
Housing: brass, nickel-plated
Collet chuck: stainless steel
O ring: NBR
Sealing ring: NBR
Pipe lines
Polyamide pipe
High pressure hose (in combination with pipe
socket Y1)
Torques
G1/8, M6x1, M8x1, M10x1 5 Nm
G1/4 8 Nm
Disassembly: Push collet chuck in until stop and pull out pipe.
1090200402
Pipe-Ø
AF
M
L1
Pipe-Ø
AF
L3
L2
L1
Pipe-Ø
AF2
L3
L2
AF1
Fittings
Elbow swivel plug-type connector
version HX - detachable without tools
Article no. Pipe-Ø M L1 L2 L3 AF1 AF2
10123615 4 G1/8 23,5 26,8 21,3 13 13
10123535 4 R1/8k* 23,5 28,3 20,3 13 13
10123619 4 M6 23,5 27,3 21,3 13 13
10123437 4 M6k* 24 27,3 20,3 13 13
10123623 4 M8x1 23,5 27,3 21,3 13 13
10123533 4 M8x1k* 23,5 27,3 20,3 13 13
10135821 4 M10x1 23,5 27,3 21,3 13 13
10123536 4 M10x1k* 23,5 28,3 20,3 13 13
10123543 6 R1/8k* 26 28,5 20,5 13 13
10123616 6 G1/4 26 30 23,5 13 13
10125172 6 R1/4k* 26 32,5 21,5 14 13
10123540 6 M6k* 26 27,5 20,5 13 13
10135822 6 M8x1 25,5 27,3 21,3 13 13
10123541 6 M8x1k* 26 27,5 20,5 13 13
10125450 6 M8x1,25k* 26 27,5 20,5 13 13
10123622 6 M10x1 26 28,5 22,5 13 13
10123542 6 M10x1k* 26 28,5 20,5 13 13
* Taper threads can only be sealed by plastic or fluid sealing compounds!
state: 06.18EN
10-1-20-03
1090200402
M2
AF
i2
L
i1
ød
M1
øD
Fittings
Reductions for the installation into metering distributor blocks with plug-type connection,
material: steel
Article no. M1 M2 i1 i2 øD ød L AF
10106099* M10x1 G1/8 7 8,5 14 4,5 17,5 14
10106106* M12x1 G1/8 7 8,5 16 4,5 17,5 17
* Corrosion protection category corresponds to a protection period of up to 720 h red rust resistance
state: 06.18EN
10-1-20-04
1090200402
Function
Connection fittings with plug-type connection are
used to be able to connect pipes at distributors and
lube points quickly and without tools.
Fittings
Technical data
Operating pressure HL: max. 16 bar*
Temperature range: -20°C up to +80°C*
Lubricant*: oil
fluid greases NLGI cl. 000-00
greases up to NLGI cl. 2
Material
Housing: brass, nickel-plated
**plastic
Collet chuck: stainless steel
O ring: NBR
Sealing ring: NBR
Pipe lines
Polyamide pipe
Torques
G1/8, M6x1, M8x1, M10x1 5 Nm
G1/4 8 Nm
**
Disassembly: Push collet chuck in until stop and pull out pipe.
© BEKA 2019 All rights reserved! Subject to alterations!
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.de
D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: beka@beka-lube.de
Fittings and Accessories
Fittings
Screw-in plug-type connectors version HL
Pipe-Ø
Pipe-Ø
L
ØD1
Straight plug-type connector
version HL - detachable without tools
Article no. Pipe-Ø ØD1 L
Fittings
10123890 4 9 32
10123892 6 11 34
Pipe-Ø
L1
L1 ØD1
Pipe-Ø
Pipe-Ø
Pipe-Ø
Pipe-Ø
ØD1
L1
L1
L2
state: 06.18EN
T-plug-type connector
version HL - detachable without tools
Article no. Pipe-Ø ØD1 L1 L2
10123927 4 9 18 36
10123928 6 11 19,5 39
10123929 8 13 22,5 45
10123936 10 15 25 50
10-1-20-06
1090200402
Pipe-Ø
L2
Pipe-Ø
AF
AF
Ø1
M
Ø1
M
Figure 1: Version with cylindrical Figure 2: Version with taper
thread and with sealing ring thread and without sealing ring
Fittings
version HL - detachable without tools
Article no. Fig. Pipe-Ø M L1 L2 AF Ø1 PV*
10111353 2 4 R1/8 k** 31 23,5 12 12 with
10111346 2 4 R1/8 k** 31 23,5 12 12 -
10106072 2 4 M10x1 k** 31 23,5 12 12 with
10106063 2 4 M10x1 k** 31 23,5 12 12 -
10106070 2 4 M8x1 k** 31 23,5 12 12 with
10106062 2 4 M8x1 k** 31 23,5 12 12 -
10127817 1 4 G1/4 19,5 13 9 17 -
10107244 1 4 G1/8 19,5 14 9 13,5 -
10134992 1 6 G1/8 23,5 18 11 13,5 -
10127818 1 8 G1/8 26 20,5 13 13 -
10127819 1 8 G1/4 23,5 17 13 17 -
10127821 1 10 G1/4 27,5 21 16 16 -
10107540 1 10 G1/8 28,5 23 16 13,5 -
10127823 1 12 G1/4 30 23,5 18 16 -
* PV = Preloading valve
** Taper thread can only be sealed by plastic or fluid compounds!
Pipe-Ø
Pipe-Ø
L1
L2
state: 06.18EN
L3
AF
L4
M
Ø1
Pipe-Ø
L1
Pipe-Ø
L2
L3
Pipe-Ø
Material housing: Material housing:
brass, nickel-plated plastic
Fittings
Y-plug-type connector
version HL - detachable without tools
Article no. Pipe-Ø L1 L2 L3 Material housing
10123938 4 29,5 9,5 18,5 brass, nickel-plated
10112040 4 35 11 22 plastic
10123939 6 36 12,5 24,5 brass, nickel-plated
Pipe-Ø
L1
Pipe-Ø
L1
L3
L3
L2
L2
AF AF
M M
Ø1 Ø1