Professional Documents
Culture Documents
MCV 902
MCV 902
MCV 902
USB
CAUTION:
This product employs a Laser System.
To ensure proper use of this product, please read this owner’s
manual carefully and retain it for future reference. Should the unit
require maintenance, contact an authorized service center.
POWER SAVE MODE - OPTIONAL
Use of controls, adjustments or the performance of procedures
You can set up the unit into an economic power save mode.
other than those specified herein may result in hazardous radia-
tion exposure. In the power-on status, press and hold / ] (POWER) button
To prevent direct exposure to laser beam, do not try to open the for about 3 seconds.
enclosure. Visible laser radiation when open. DO NOT STARE - Nothing is displayed in the display window when the unit
INTO BEAM. goes into the power save mode.
To cancel power save mode, press / ] (POWER).
Before use
Handling discs
Contents Do not touch the playback side of the disc. Hold
Before use the disc by the edges so that fingerprints do not
get on the surface. Never stick paper or tape on
About the Symbols for instruction /
the disc.
Notes on Discs / Notes on Tapes . . . . . . . .3
Front / Back Panel . . . . . . . . . . . . . . . . . .4
Remote Control . . . . . . . . . . . . . . . . . . . . .5
Connections
Speaker System Connections . . . . . . . . .6
Antenna (Aerial) Connections /
Storing discs
Auxiliary Equipment Connections /
After playing, store the disc in its case. Do not
Optional Equipment Connections . . . . . . .7
expose the disc to direct sunlight or sources of
Operation heat and never leave it in a parked car exposed
Audio Adjustment . . . . . . . . . . . . . . . . . .8-9 to direct sunlight.
Sleep Timer Function / Setting the Clock . .9
Timer Function . . . . . . . . . . . . . . . . . . . .10 Cleaning discs
Presetting the Radio Stations / Fingerprints and dust on the disc can cause poor
Listening to the Radio . . . . . . . . . . . . . . .11 picture quality and sound distortion. Before play-
RDS Function - OPTIONAL . . . . . . . . . . .12 ing, clean the disc with a clean cloth. Wipe the
Tape Playback / Tape Recording . . . . . . .13 disc from the center outward.
CD Playback . . . . . . . . . . . . . . . . . . . . . .14
To Program Play / Repeat /
To check MP3 file information . . . . . . . . .15
About MP3/WMA . . . . . . . . . . . . . . . . . .16
USB Function . . . . . . . . . . . . . . . . . . . . . . .17
Reference
Troubleshooting . . . . . . . . . . . . . . . . . . .18 Do not use strong solvents such as alcohol,
Specifications . . . . . . . . . . . . . . . . . . . . .19 benzine, thinner, commercially available
cleaners, or anti-static spray intended for older
vinyl records.
Adhesive tape
5
16
6 11 17
7 12 18
19
8 13 20
14
1. • DISC SKIP button
• CD SELECT buttons (DISC1, DISC2, DISC3) MCD502 Model
• Z OPEN/CLOSE button
2. DISPLAY WINDOW
3. / ] (POWER) button
4. • XDSS button 15
• AUTO TUNING DOWN/UP button
REWIND/ FAST FORWARD (b bb/BBB)
button
• PRESET DOWN/UP button 7. Z PUSH EJECT position - TAPE 1
BACKWARD PLAY (b b) button : OPTIONAL 8. • GAME LINK connector
FORWARD PLAY (B B) button (VIDEO IN, AUDIO L/R)
• STOP (x)/ CLEAR button • USB connector
• OAO button 9. CD DOOR
5. • FUNCTION SELECT buttons 10. • CLOCK button
[ TUNER, TAPE, CD, AUX / AV, USB ] • TIMER button
• PLAY MODE (DEMO) button • ST./ MONO/ NOR. DUBB. button
• PROG. MEMO. button • CD SYNC./ HI-DUBB. button
• RECz/ PAUSE[] (RECORD/ RECORD 11. • MIC1/ MIC2 (MIC JACK)
PAUSE) button : 6.3 mm - OPTIONAL
• SET/ RDS(OPTIONAL)/ CD[]/ AM-NOISE • MIC VOL. (MIC VOLUME KNOB)
button - OPTIONAL
• VOLUME CONTROL KNOB 12. Z PUSH EJECT position - TAPE 2
• EQ button 13. SPEAKER TERMINAL (MCV902 model)
• SURROUND button 14. POWER CORD
• USER EQ button 15. SPEAKER TERMINAL (MCD502 model)
• MP3 OPT (MP3 OPTIMIZER) button 16. AM/ FM ANTENNA TERMINAL
• MULTI JOG 17. AUX IN (AUXILIARY INPUT connector)
MANUAL TUNING 18. VIDEO OUT connector
CD SKIP (./>) 19. WOOFER SYSTEM connector
CLOCK ADJUST (MCV902 model)
6. PHONES (HEADPHONE JACK) 20. SUB WOOFER SPEAKER TERMINAL
: 6.3mm (MCV902 model)
Before use
LINK button (MCV902 model)
WOOFER POWER button
(MCV902 model) MUTE button
POWER button
• USB button
PRESET/FOLDER( / ) buttons • FUNCTION button
VOLUME ( / ) buttons
SLEEP button
DIMMER button
CD FUNCTION buttons
PLAY/PAUSE (B
B/[]) button •
CD STOP(x) button • PROGRAM/MEMO button
CD SKIP/SEARCH •
(. bb/B BB >) buttons TAPE FUNCTION buttons
TUN.(-/+) buttons • • BACKWARD PLAY (b b) button
REPEAT button • : OPTIONAL
• FORWARD PLAY (B B) button
D.SKIP button • FAST REWIND PLAY (b bb) button
• FAST FORWARD PLAY (B BB) button
EQ PATT. • • TAPE-1/2 SELECT buttons
(EQUALIZER PATTERN) button • RECORD/ RECORD PAUSE (z/[])
XDSS button • button
SURR. (SURROUND) button • • TAPE STOP (x) button
OAO button •
RANDOM button
NUMERIC buttons INFO (MP3/ WMA file information
display) button
Caution
: Do not mix old and new batteries. Never
mix different types of batteries (standard,
alkaline, etc.).
MCD502 Model
Red White
Notes:
• Connect the speakers using the supplied speaker cables by matching the colors of the terminals
and those of the cords.
• Be sure to match the speaker cord to the appropriate terminal on the components: + to + and – to –.
If the cords are reversed, the sound will be distorted and will lack base.
• If you use front speakers with low maximum input rating, adjust the volume carefully to avoid
excessive output on the speaker.
• Connect the Left/Right speaker correctly. If it reversed, the sound may be distorted.
FM
GND AM
Connections
AM(MW) loop
antenna
(aerial)
To VIDEO IN To AUDIO IN
(supplied)
IN OUT
VIDEO
To VIDEO OUT
AUDIO (L)
To AUDIO OUT
Auxiliary Device
Introduction
You can enjoy different sounds by selecting the matically turned off after the specified time has
sound mode you want. elapsed.
Press LINK on the remote control repeatedly to 1. Press SLEEP to set the desired sleep time.
select the sound mode. The SLEEP indicator and sleep time appear
LINK ON → SURROUND 1 → SURROUND 2 in the display window.
2. Each time you press SLEEP, the setting
changes in the following order.
SLEEP 180 → 150 → 120 → 90 → 80
Using the subwoofer → 70 → 60 → 50 → 40 → 30 → 20 → 10
(MCV902 model) → OFF (No display) → SLEEP 180 ...
You can use the sound of the subwoofer to
Note:
enhance the bass.
If you press SLEEP while the sleep time is
Press WOOFER POWER on the remote control
displayed, the SLEEP time is reset.
repeatedly (or press POWER on the subwoofer)
title
to turn on the subwoofer.
To cancel the sleep timer mode
SUB_WOOFER ON ↔ SUB_WOOFER OFF If you have to stop the function, press the SLEEP
repeatedly until “SLEEP 10” appears, and then
Using Microphone - OPTIONAL press SLEEP once again while “SLEEP 10” is
You can sing to a music source by connecting a displayed.
microphone to the unit.
1. Connect your microphone (not supplied) to the Setting the Clock
Operation
MIC jack. 1. Press CLOCK.
“ ” will be shown in the display window. 2. Select a 24 hour cycle or a 12 hour cycle by
2. Play a music you want. turning MULTI JOG.
3. Sing along with the accompaniment.
Adjust the microphone volume by turning MIC
VOLUME KNOB. or
10
Operation
Press / ] (POWER) to turn the unit off or select
panel. A preset number will flash in the display another function mode (CD, USB, AUX, A/V,
window. TAPE).
4. Press PRESET DOWN/ UP
[or PRESET/ FOLDER ( / ) on the For your reference
remote control] to select the preset number • If an FM program is noisy;
you want. Press ST./MONO so that “MONO” appears in
5. Press PROGRAM/ MEMO or PROG. MEMO. the display window. There will be no stereo
again. The station is stored. effect, but the reception will be improved.
Press ST./MONO again to restore the stereo
6. Repeat the steps 1 - 5. effect.
To delete all the memorized stations • To improve reception;
Press and hold PROGRAM/ MEMO on the Reposition the supplied antennas.
remote control (or PROG. MEMO. on the front Notes:
panel) for about two seconds, “ERASE ALL” When receiving the MW (AM) broadcast, beat
appears in the display window. And then noises may be occur. If it does, press AM-NOISE
PROGRAM/ MEMO on the remote control button once.
(or PROG. MEMO. on the front panel) again, the AM -- NOISE ON ↔ AM -- NOISE OFF
stations are deleted.
For your reference
If all stations have already been entered, “FULL”
message will appear in the display window for a
moment and then a preset number will flash. To
change the preset number, follow the steps 4-5.
To recall presets
Press and hold PRESET/ FOLDER ( / ) on
the remote control until the desired preset num-
ber appears. Or press it repeatedly.
11
12
title
Basic Playback
1. Press TAPE (or FUNCTION) to select TAPE Basic Setting
function. 1. Select a function you want to record except
(“NO TAPE” appears in the display window.) tape function.
2. Load a tape. 2. Open the cassette TAPE 2 and insert a blank
3. Press PLAY (BB or b: OPTIONAL). cassette into the cassette compartment.
To set the recording direction: OPTIONAL
Installation title
To Stop Play Press the PLAY MODE repeatedly to set the
Press STOP(xx) during playback. recording direction.
Operation
You can select the direction of the cassette you
want by pressing PLAY MODE. To pause recording
Display
Press z/[] during recording.
Function
- “REC” flashes in the display window.
After the cassette TAPE 2 plays the front
or reverse (backward play) side, stops To stop recording
automatically.
Press STOP(xx).
After the cassette TAPE 2 plays the front
and reverse side, stops automatically. CD to Tape Synchronized Recording
After the cassette TAPE 2 plays six times The CD synchro recording function dubs a com-
repeatedly the front and reverse side, plete CD and programmed titles automatically
stops automatically. into a cassette.
1. Press CD and load a disc you want to
title
Dubbing record.
This function shows how to record from tape to 2. Press CD SYNC. in stop mode.
tape. “REC” flashes and “CD SYNC” indicator
1. Press TAPE (or FUNCTION) to select tape lights.
function. 3. The synchronized recording is started
• Cassette TAPE 1- Insert a playback tape to automatically after about 8 seconds.
dub.
Notes:
• Cassette TAPE 2- Insert a blank tape.
• If you wish to record from the desired track,
2. Press NOR. DUBB./ HI-DUBB. as shown
select the desired track with CD SKIP/
below.
SEARCH (. bb/BB >) before com-
To stop dubbing, press STOP(x x).
mencing CD synchro recording.
title
13
14
title
gram can contain up to 20 tracks.
1. Press PROGRAM/ MEMO on the remote want to modify.
2. Repeat the steps 2 - 4 above.
control (or PROG. MEMO. on the front
panel) on stop mode.
“PROG.” appears in the display window. Repeat
To play one track repeatedly
Track Number Program number Press REPEAT once during playback.
- “REPEAT” appears in the display window.
To play one folder repeatedly
(only MP3/WMA file)
Program indicator Disc Number
Press REPEAT again during playback.
title
- “REPEAT ALL” appears in the display window.
2. Press D.SKIP, DISC SKIP or CD SELECT To play one disc repeatedly
(DISC 1/2/3) to select the disc. Press REPEAT again during playback.
- “REPEAT DISC” appears in the display window.
To play all tracks on all discs repeatedly
Press REPEAT once more during playback.
- “REPEAT ALL DISC” appears in the display
3. Press . bb/BB > to select the track. window.
Or use MULTI JOG. To cancel repeat play
Operation
- Press REPEAT several times until repeat indi-
cators disappear.
Program repeat play
• Press REPEAT once during program play.
4. Press PROGRAM/ MEMO on the remote - “REPEAT” appears in the display window.
control (or PROG. MEMO. on the front (One track repeat)
panel). • Press REPEAT again during program play.
5. Repeat the steps 1 - 4 above. - “REPEAT ALL DISC” appears in the display
6. Press PLAY (B B) on the front panel or window. (All program repeat)
PLAY/ PAUSE (B B/[[]) on the remote control.
Operation
To check MP3 file information
To check program contents Press INFO during playing a MP3 file.
Press PROGRAM/ MEMO on the remote control - The information (Title, Artist or Album) of the
(or PROG. MEMO. on the front panel) on stop MP3 file will be shown in the display window.
mode. - If there is no the information of the MP3 file,
- The disc, track and program number will be “NO ID3 TAG” indicator will be shown in the
displayed in the display window. display window.
title
Note:
To clear program contents This unit can play a CD-R or CD-RW that
Press PROGRAM/ MEMO on the remote control contains audio titles or MP3 files.
(or PROG. MEMO. on the front panel) on stop
mode. And then press CD STOP(xx) on the MP3/WMA file folder function
remote control.
Press PRESET/ FOLDER ( / ) on the
title
To add program contents remote control to select the folder you want.
1. Press PROGRAM/ MEMO on the remote Note:
control (or PROG. MEMO. on the front It is applied in the case that has several folder in
panel) repeatedly in the program stop mode MP3/WMA file.
until the Track Number blinks.
2. Repeat the steps 2 - 4 above.
15
16
Operation
• This unit is not supported when the total num-
ber of files is 1000 or more.
Compatible Devices
1. Devices which require additional program
installation when you have connected it to a
computer, are not supported.
2. MP3 Player : Flash type MP3 player.
• The MP3 player requiring installation of a driver
is not supported.
3. USB Flash Drive : Devices that support
USB2.0 or USB1.1.
Basic Playback
1. Connect the USB device to the USB connec-
tor of your unit.
2. Press USB to select USB function.
“CHECKING” appears in the display window,
and then the total number of files is displayed.
3. Press PLAY/ PAUSE (B/[[]).
In addition, you can also play using the
NUMERIC buttons.
17
18
Impedance 6Ω 24 Ω
Frequency Response 60 - 20000 Hz 70 - 20000 Hz
Sound Pressure Level 86 dB/W (1m) 83 dB/W (1m)
Reference
Rated Input Power 270W/ 250W 110 W
Max. Input Power 540W/ 500W 220 W
Net Dimensions (WxHxD) 272x455x320 mm 210x450x280 mm
Net Weight (1EA) 9.17 kg 4.62 kg
Speaker Name MCS902AW MCS902W
Type 1 Way 1 Speaker 1 Way 1 Speaker
12 Ω 12 Ω
[Subwoofer]
Impedance
Frequency Response 55 - 1500 Hz 55 - 1500 Hz
Sound Pressure Level 85 dB/W (1m) 85 dB/W (1m)
Rated Input Power 180 W 180 W
Max. Input Power 360 W 360 W
Net Dimensions (WxHxD) 273x370x322 mm 273x370x322 mm
Net Weight (1EA) 7.3 kg 7.3 kg
19