Professional Documents
Culture Documents
Mechanical Checksheet Day2
Mechanical Checksheet Day2
Mechanical Checksheet Day2
Governor system
Inspection result
Inspection part Contents of inspection Criteria Remarks
Unit # 01 Unit # 02 Unit # 03
○ Check valves and piping for oil & air leakage ✓, ᇫ, x
Governor ○ Measure temperature of pressure tank ℃
○ Check noise and smell ✓, ᇫ, x
○ Check for oil leakage in tank, pipes & valves ✓, ᇫ, x
Pressure tank
○ Measure oil pressure and level MPa/mm / / /
Oil sump ○ Check for oil leakage in tank, pipes & valves ✓, ᇫ, x
tank ○ Measure oil level and temperature mm/℃ / / /
○ Check for oil leakage in tank, pipes & valves ✓, ᇫ, x
Leakage oil tank
○ Measure oil level and temperature mm/℃ / / /
Inspection result
Inspection part Contents of inspection Criteria Remarks
Unit # 01 Unit # 02 Unit # 03
○ Check for oil leakage in tanks, pipes & valves ✓, ᇫ, x
○ Check for oil leakage from Servomotor packing ✓, ᇫ, x
Main inlet valve ○ Check for bolts status and leakage from inlet valve rotating parts ✓, ᇫ, x
○ Check for water leakage from expansion joint ✓, ᇫ, x
○ General condition of the valve and hydraulic unit ✓, ᇫ, x
Firefighting System
Inspection Result
Inspection part Contents of inspection Criteria Remarks
HPCO2 FM200
○ Inspect cylinder's weight control system ✓, ᇫ, x
HPCO2/FM200
○ Manual release box ✓, ᇫ, x
System
○ Release rod weights ✓, ᇫ, x