Professional Documents
Culture Documents
1 DT 6.1 Speciality Bitualuminpaint
1 DT 6.1 Speciality Bitualuminpaint
1 DT 6.1 Speciality Bitualuminpaint
PRODUCT USES
High lustre
bituminous
May be applied directly to bituminous surfaces, “malthoid” roofs and
SPECIALITY
creosoted timber without priming.
aluminium paint
Excellent as a roof paint where its ability to reflect heat can reduce the
inside temperature of houses and buildings.
PRODUCT INFORMATION
APPLICATION INFORMATION
Application Surface Temperature between 10 - 35°C
conditions Relative Humidity between 10 - 85 %
Application Brush, roller or airless spray
methods
Thinner Thinning not recommended
Ready for use after thorough stirring
Drying Time Surface dry 8 hours
(Drying times will be extended during cold,
wet or humid conditions)
Recoating Time 18 hours (overnight)
Cleaning of For clean up use Fixit Brush Cleaner/
equipment Degreaser or Mineral Turpentine
Substrates Suitable for bituminous aluminium surfaces,
“malthoid” roofs and creosoted timber.
PACK SIZES
DULUX TRADE
Data Sheet.
Ensure that surfaces are sound and free from dust,
dirt, grease and oil. Surfaces must be thoroughly dry. Keep out of reach of children.
Do not apply during cold (below 10°C) or wet weather. Ensure good ventilation during application and drying.
Do not apply directly to bare metal surfaces. Flash Point 37ºC.
Not to be used over very soft bitumen and pitches,
where the difference in elasticity of the 2 systems will
lead to “crocodiling”.
ADDITIONAL INFORMATION
Not suitable for application to unprimed bare Storage Conditions
metal surfaces.
Store under cool dry conditions.
Not suitable for heat resistance.
Not suitable for direct application to powdery or
friable surfaces whether previously painted or not.
Coats Required
BITUMINOUS ALUMINIUM PAINT
SURFACE PREPARATION
NEW SURFACES
ICI Dulux (Pty) Ltd PO Box 123704 Alrode 1451 8 Juyn Street Alrode Alberton 1450 Helpline 0860 330 111 Tel +2711 861 1000
Fax +2711 864 6701 Email info@dulux.co.za. www.dulux.co.za www.akzonobel.com