Professional Documents
Culture Documents
Polaris 600 Alvo Integra Connection Manual en
Polaris 600 Alvo Integra Connection Manual en
Alvo Integra system uses RS232 communication interface for control Draeger Polaris 600
operating lamp. Only the lines ExD, TxD and GND are in use.
Communications parameters:
2
05.05.2017 Connection manual Polaris 600 - Alvo Integra
It is necessary to connect the power supply to the OR interface, as shown in the figure below -
terminals 13 and 14
3
05.05.2017 Connection manual Polaris 600 - Alvo Integra
It is required to set system numbers for A and B switches, to each power supply to connect it to a
network. Below table with settings and draft with switches
4
05.05.2017 Connection manual Polaris 600 - Alvo Integra
5
05.05.2017 Connection manual Polaris 600 - Alvo Integra
It is required to set each system numbers switches at OR interface – table and draft bellow:
1 A=1 B=1
2 A=2 B=1
3 A=3 B=1
6
05.05.2017 Connection manual Polaris 600 - Alvo Integra
For control Draeger Polaris 600 operating lamp from Alvo Integra system is required IOR
Interface with is supplied by Draeger.
Connection diagram
7
05.05.2017 Connection manual Polaris 600 - Alvo Integra
8
05.05.2017 Connection manual Polaris 600 - Alvo Integra
6. Alvo Integra control panel layout for Draeger Polaris 600 operating
lamp
1 2 3 4 5 6
Function description
1 Power On/Off
2 Brightness control
3 Light temperature
4 Light field
5 Endo light
6 Lamp1 and Lamp2 synchronization
7 Status indicator
9
05.05.2017 Connection manual Polaris 600 - Alvo Integra
7. Alvo Integra control panel layout for Draeger Polaris 600 camera
2
Function description
3 1 Power On/Off
2 Zoom control
4 3 Automatic exposition
4 Manual exposition
5 5 Automatic focus
6 Manual focus
6 7 Freeze-frame
8 Snapshot
7
8. Technical data
10