This document contains instructions for four engineering graphics assignments involving isometric and perspective projections:
1. Draw the perspective view of a hexagonal pyramid resting on its base.
2. Draw the perspective view of a circular lamina lying on the ground plane touching the principal plane.
3. Draw the isometric projection of a frustum of a cone centrally located on top of a circular slab.
4. Draw the isometric view of a stacked arrangement of a square block, cube, and cone.
This document contains instructions for four engineering graphics assignments involving isometric and perspective projections:
1. Draw the perspective view of a hexagonal pyramid resting on its base.
2. Draw the perspective view of a circular lamina lying on the ground plane touching the principal plane.
3. Draw the isometric projection of a frustum of a cone centrally located on top of a circular slab.
4. Draw the isometric view of a stacked arrangement of a square block, cube, and cone.
This document contains instructions for four engineering graphics assignments involving isometric and perspective projections:
1. Draw the perspective view of a hexagonal pyramid resting on its base.
2. Draw the perspective view of a circular lamina lying on the ground plane touching the principal plane.
3. Draw the isometric projection of a frustum of a cone centrally located on top of a circular slab.
4. Draw the isometric view of a stacked arrangement of a square block, cube, and cone.
1. A hexagonal pyramid of height 60 mm and base edge 35 mm is
resting on its base with one base edge parallel and 10 mm behind PP. The station point is 20 mm infront of PP, 40 mm to the right of the axis and 70 mm above GP. Draw the perspective view. 2. A circular lamina 50 mm diameter is lying on GP touching PP. The Station point is 50 mm above GP and 60 mm infront of PP and contain in the central plane which passes at a distance of 40 mm from the centre of the circle. Draw perspective view. 3. Frustum of a cone with base diameter 40 mm and top diameter 25 mm with a height of 50 mm rests centrally on top of a circular slab of 50 mm diameter and 25 mm thick. Draw Isometric projection. 4. A square block 60 mm side and 20 mm thick rests on the ground on the square face. On its top rests a cube 40 mm side centrally . A cone 30 mm diameter and 60 mm tall is placed centrally above the cube. Draw the isometric view of the combined solids.