Professional Documents
Culture Documents
Series: LK-1900BB
Series: LK-1900BB
Higher productivity.
Low-noise and low-vibration.
LK-1900B-SS
LK-1900B Series
The machine is provided with an active tension mechanism
which enables the electronic control of "stitching."
LK-1900B-BS
Many different models are prepared according to the type of materials. STANDARD LIQUID CRYSTAL PANEL (NEW)
The LK-1900B model comes in five different subclass models, such as S type (standard), H type (for heavy-weight materials), F type (for foundation), M type (for knits and knitted materials) , Functional settings, such as pattern numbers and needle thread tensions
W type (with a large shuttle hook for heavy-weight materials) and (bird's nest preventing /shorter-thread remaining functions) , to offer a choice according to any application. can be established through the operation panel with ease. Distance
between holes in a button can be easily changed by means of pattern
The needle's penetrating force into the material has been increased. This provides an improved responsiveness to heavy-weight materials for the H type machine.
enlargement/reduction feature.
The W type has adopted a large shuttle hook, which reduces the frequency of bobbin-thread changing to enable highly efficient sewing work.
Standard sewing patterns can be assigned to pattern keys P1 to P50. Any
of the sewing patterns assigned to the P1 to P25 pattern keys can be
activated with a touch of the corresponding key. This means that
workability is improved by assigning 25 sewing patterns that are most
frequently used to those pattern keys.
As many as 99 different cycle
sewing patterns, each of which
combines a maximum of 99
different sewing patterns, can
be stored in the memory.
USB port
S type (Bartacking pocket lip of suits) H type (Bartacking crotch of jeans) F type (Attaching the shoulder straps to brassier) M type (Bartacking shoulder of running shirt)
✽ Presser foot for vertical bartacking is supplied with the unit as an accessory.
1 2
Computer-controlled, High-speed, Bartacking Machine Computer-controlled, High-speed Bartacking Machine for Eyelet Buttonholes
LK-1901B
with bird's nest preventing / shorter-thread remaining functions
LK-1900BB
Thanks to the Bird's nest preventing/shorter-thread remaining
The world’s first
LK-1901B-SS
LK-1902B
remaining
Length of thread remaining on the material
at the end of sewing has been reduced to 2 mm or less✽.
Finishing of the Bird's nest
The newly-developed shorter-thread remaining mechanism trims the thread shorter after the regular thread preventing/shorter-thread remaining
trimming operation. Additionally, thread waste produced by thread trimming is withdrawn by suction. Thanks functions (on the wrong side)
LK-1900B
The machine achieves sewing speed of LK-1902B-SS
3,200sti/min The machine's thread-trimming etc.
The sewing pattern best suited to the sewing product WORK CLAMP FOOT AND FEED PLATE FOR LK-1902B
have been increased to significantly shorten (for belt-loop attaching)
total cycle time. to be bartacked can be selected by single-key operation.
Work clamp Feed plate Number
The machine is provided as standard with six different linear bartacking foot of pattern
The machine is highly productive and provided as
patterns. Since the sewing size can be easily changed, the optimal number Provided as 13544465
standard with 51 different sewing patterns. This is an
10
of stitches and sewing size can be speedily selected according to the standard 17
2
excellent high speed computer-controlled bartack 14143002
LK-1902B-SS
7
belt-loop width. If the normally used patterns are assigned to the patterns 18
machine which anables to register as many as 99 cycles LK-1902B-HS 17 24.8
keys, a desired pattern can be called up or changed with single-key
of which each cycle can contain 99 sewing patterns as 13545660
operation.
2.8
19
2.4
well as good responsiveness to various sewing patterns. Option
For large size 13545504 20
7
The machine head has been designed 27.4 21
27
with an emphasis on operability.
10
With its broadly curved feed bracket (presser arm), the machine permits 13547161 13545801 22
Option
2.4
easy placement of the material to be sewn. The slimly shaped bed and 37
For extra
7
head design that allows free space under the arm demonstrates greater
large size
2.8
37
operability in handling materials on the machine and continuous processes. 41.5
13547005 22
LK-1900B-SS These features contribute substantially to increased productivity in belt-loop
37.4
attachment processes.
3 ✽ A finger guard is included in the presser foot. 4
TABLE OF THE STANDARD PATTERNS
No. of work
No. of work
No. of work
No. of work
Sewing size Sewing size Sewing size Sewing size
Number of
Number of
Number of
Number of
clamp foot
clamp foot
clamp foot
clamp foot
(mm) (mm) (mm) (mm)
stitches
stitches
stitches
stitches
No. Stitch diagram No. Stitch diagram No. Stitch diagram No. Stitch diagram
Length-
Length-
Length-
Length-
Cross-
Cross-
Cross-
Cross-
(Note 2)
(Note 2)
(Note 2)
(Note 2)
wise
wise
wise
wise
wise
wise
wise
wise
1 1
1
2.0 16 2 17 21 0 10 2 31 52 7 10 13
(51)
3 3
41 29 20 2.5
1 1
2 2.0 10 2 18 0 10 2 32 63 7 12 13
3 3
42 28
Linear bartacking
1 6
✽
3 2.5 16 19 0 25 33 24 6 10 13
4 7
42 39 25 2.5
Semilunar bartacking
6 6
✽
4 3.0 24 20 36 0 25 34 31 6 12 13
7 7
1 6
Large bartacking
5 2.0 10 2 21 41 0 25
3 7
Lengthwise bartacking
28 35 48 10 7 14 43 45 25 2.5
1
✽
6 2.5 16 22 44 0 35 (Note 3)
4
12
1
(Bottom)
(Top)
7 2.0 10 2 23 28 20 4.0
3
Lengthwise bartacking
36 36 48 10 7 14 44 58 30 2.5
1
(Bottom)
✽
(Top)
8 2.5 16 24 36 20 4.0
4
9, 10
✽
(Top)
9 56 3.0 24 25 42 20 4.0 6
7
37 90 3 24 45 75 30 2.5
6
(Bottom)
✽
(Top)
10 64 3.0 24 26 56 20 4.0 7
7
(Bottom)
(Top)
11 21 2.5 6 27 18 20 0
Lengthwise linear bartacking
Small bartacking
38 28 2 8 5 46 42 30 2.5
(Bottom)
(Top)
12 28 2.5 6 8 28 10 0
21 11
(Bottom)
(Top)
13 36 2.5 6 29 20 0 47 91
39 28
Round bartacking
(Bottom)
Radial tacking
(Top)
14 14 2.0 8 30 28 20 0 48 99
Large bartacking
ø12 16 ø8 15
(Note) 1. Sewing size shows the dimensions when the scale rate is 100%.
2. Refer the No. of work clamp foot to the separate table of work clamp foot.
15 21 2.0 8 5 3. For No. 22, modify the work clamp foot blank for use. 49 148
4. Use the patterns with ✽ marks for sewing denim.
5. No.51 is the pattern No.1 without thread clamp.
6. For LK-1900BB, the pattern No.51 is not selectable. 40 48
16 28 2.0 8 50 164
5 6
TABLE OF THE WORK CLAMP FOOT OPTION
No. of work
clamp foot 1 2 3 4 5 6 7 8 Simple work clamp kit for the LK-1900B Series
13518659(asm.) 13548557(asm.) 13542964(asm.) 13548151(asm.) 13542451(asm.) Conventionally, the front plate has to be removed to change the work clamp.
With the new work clamp kit, the work clamp can be changed without removing the plate.
32.8
32.6
32.3
33.4
Work
32.8
40.5
40
40
40
40
clamp
foot
21 10 10
5.1
3.4
4.5
20 27
5
4.5
27 27 22 22
35
17.5
17.5
18.5
Feed plate The lever for lifting the work clamp can be independently slid
14.5
14.5
4.8
15
4.6
5.4
5.4
back and forth.
The machine parts can be adjusted and replaced entirely by
hand without screwdrivers or others tools. Changing parts is
29 29 20 21.2 11.4 37.3 27.4 24
now a "clean-hands" procedure.
Finger guard✽ 26224204 13548300 26224204
Application
Simple work clamp kit Part No.: 40057279
code S F F H M S H S
S (standard) Installed on
machine head — — — — Option — Option
H (heavy-weight
materials ) — — — Option — — Installed on
machine head —
No. of work
clamp foot 9 10 11 12 13 14 15 16
14137509(Right) 40021871(Right) 40021874(Right) 40021877(Right) 40021880(Right)
13571955(asm.) 13561360(asm.)
14137608(Left) 40021872(Left) 40021875(Left) 40021878(Left) 40021881(Left)
24.1
23.5
28
29
30
28
Work
41
45
45
45
clamp
50
54
60
foot
23
12
10
14
20
33
14
5.6
ø1
ø1
ø1
2
4
12 2 4
13.6
23
2-pedal unit for standing work✽ PK-57✽
[Part No. M85205800A0] [Part No. GPK570010B0]
14116503 14116909 14116701 14137707 40021873 40021876 40021879 40021882 ✽ To connect the cable asm. to the electrical box, ✽ To connect the cable asm. to the electrical box,
(without knurl) (without knurl) (without knurl) (without knurl) (with knurl) (with knurl) (with knurl) (with knurl) conversion cable (separately available) is necessary. conversion cable (separately available) is necessary.
30 Pedal switch conversion cable asm. Pedal switch conversion cable asm.
50
25 22
[Part No. M90125900A0] [Part No. M90135900A0]
40
9.4
Feed plate
24
23
ø1
ø1
14.4
2
4
.4
.4
.4
★ For the foundation type (F-type) sewing machine for the European market, the work clamp foot No. 2 is installed on the machine head and the work clamp foot No. 9 is supplied with the ✽ IP-420U should be ordered as a part.
machine as an accessory (packed together) (note that the work clamp feet No. 3 and No. 10 are not supplied with the machine). IP-420U [Part No. 40144886]
7 ✽ Install a finger guard suitable for each work clamp foot when replacing the work clamp foot. Panel cable asm. [Part No. 40065566] 8
TABLE OF THE OPTIONAL PARTS SPECIFICATIONS
Part name Type Part No. Model name LK-1900B-SS LK-1900B-HS LK-1900B-FS LK-1900B-MS LK-1900B-WS
Without knurl/with plating Sewing area 20×40 14120109 For heavy-weight With large hook
For knits and
Feed plate blank Application Standard materials For foundation
knitted materials for heavy-weight
With knurl/with plating Sewing area 20×40 14120307 materials
Without knurl/stainless steel✽ Sewing area 20×40 14120505 Max. sewing speed 3,200sti/min✽ 2,700sti/min✽
Sewing area 30mm (L) × 40mm (W)
Without knurl/with plating Sewing area 30×40 40021855
Stitch length 0.1~10mm (0.1mm step)
Without knurl/without plating Sewing area 30×40 40021856 Needle bar stroke 41.2mm
t=1.2 Without knurl/stainless steel✽ Sewing area 30×40 40021857 Lift of the work clamp foot Standard 14mm (17mm when the reverse-rotation needle-up function)
✽ Stainless steel t=0.5 With knurl/with plating Sewing area 30×40 40021858 Auto-lifter Provided as standard (stepping motor type)
Needle thread tension Active tension (electronic thread tension control system)
With knurl/without plating Sewing area 30×40 40021859
Needle (at the time of delivery) DP×5 (#14) DP×17 (#21) DP×5 (#11) DP×5 (#11) DP×17 (#21)
Work clamp foot Hook Standard shuttle hook Large shuttle hook
face plate (asm.) Number of stitches
Face plate for presser blank 14121263 that can be stored in memory Max. 20,000 stitches
Number of standard patterns 51 patterns
Number of data that can be input 200 patterns (for up to 150 patterns, sewing data can be added.)
With knurl/with plating (right) Sewing area 20×40 14121701 20~200% (1% step), Pattern enlargement/reduction
Presser blank Enlarging/Reducing facility can be done by increasing/decreasing the stitch length
With knurl/with plating (left) Sewing area 20×40 14121800
Memory method Internal-organs memory
With knurl/with plating (right) Sewing area 30×40 40021851 Bobbin thread counter Provided as standard (up/down method)
With knurl/with plating (left) Sewing area 30×40 40021852 Lubrication Hook: minute-quantity lubrication
t=3.2 With knurl/without plating (right) Sewing area 30×40 40021853 Lubricating oil JUKI New Defrix Oil No.2 (equivalent to ISO VG32)
Sewing machine motor 450W compact AC servomotor (direct-drive system)
With knurl/without plating (left) Sewing area 30×40 40021854
Power consumption 250VA
With knurl/with plating (right) 40021869 Weight Machine head (include motor) 42kg, Control box 5.6kg
24
Work clamp
7
foot blank
22
14 14
7
With knurl/with plating (left) 40021870 Bird's nest preventing / Eyelet buttonhole
36
Shorter-thread remaining functions bartacking machine Belt-loop attaching machine
Model name
A=1.6 B=2.6 With relief slit Standard type B2426280000 LK-1900B-BS LK-1900B-BF LK-1901B-SS LK-1902B-SS LK-1902B-HS
Needle hole guide
A=1.6 B=2.0 Without relief slit F and M types D2426282C00 Application Standard For foundation Standard Standard For heavy-weight
materials
A=2.3 B=4.0 Without relief slit for heavy-weight material 14109607
øB øA Max. sewing speed 3,200sti/min✽ 3,000sti/min✽
A=2.7 B=3.7 Without relief slit for extra heavy-weight material D2426MMCK00 Sewing area 30mm (L) × 40mm (W) 30mm (L) × 40mm (W)
Stitch length 0.1~10mm (0.1mm step) 0.1~10mm
Finger guard (1) A=56.5 B=64 13533104
Needle bar stroke 41.2mm 41.2mm
A
A=66.5 B=43 For lengthwise bartacking 13573407 (electronic thread tension control system) (electronic thread tension control mechanism)
B Needle (at the time of delivery) DP×17 (#14) DP×17 (#11) DP×5 (#14) DP×5 (#14) DP×17 (#21)
Hook Standard shuttle hook Standard shuttle hook
Number of stitches
Finger guard (3) B that can be stored in memory Max. 20,000 stitches Max. 20,000 stitches
L
A=21.5 B=35.5 L=67 For lengthwise bartacking 14135305 17, 18 (19, 20, 21, 22*)
Applicable pattern number 50 patterns 11, 12, 13 *This device has been factory-set to
A
A=21.5 B=35.5 L=58.5 For specially ordered work clamp 14120000 by increasing/decreasing the stitch length by increasing/decreasing the stitch length
A
SM8040302TP
Memory method Internal-organs memory Internal-organs memory
Material drawing amount — Max. 3mm —
Bobbin thread counter Provided as standard (up/down method) Provided as standard (up/down method)
Part name Feature Lubrication Hook: minute-quantity lubrication Hook: minute-quantity lubrication
The silicon oil pipe are the parts which cool the heat of a needle. JUKI New Defrix Oil No.2 JUKI New Defrix Oil No.2
Silicon oil pipe Lubricating oil (equivalent to ISO VG32) (equivalent to ISO VG32)
Type Part No. 450W compact AC servomotor 450W compact AC servomotor
Sewing machine motor (direct-drive system) (direct-drive system)
Silicon oil pipe 40040910 Power consumption 250VA 250VA
Rubber plug TA1050504R0 Weight
Machine head (include motor) 42kg, Machine head (include motor) 42kg,
Control box 5.6kg Control box 5.6kg
Oil felt 13501705
Air consumption 6 L/cycle —
Silicon oil thread guide B1127280000
Screw 11/64 - 40 L5 SS4110515SP
✽ “sti/min” stands for “Stiches per Minute”
Silicon oil pouring hole 13501408 ✽ CompactFlash™ or CFA specification compatible media.
✽ “CompactFlash™” is a registered trademark of SanDisk Corporation, U.S.A.
9 ✽ Other company names and product names/brand names are trademarks or registered trademarks of the respective companies. 10
WHEN YOU PLACE ORDERS
Please note when placing orders, that the model name should be written as follows:
LK1901BSS000
Application Code Work clamp foot Code Attachment Code
Standard S Standard S Not provided 000
Belt-loop attaching
LK1902B S000
Application Code Work clamp foot Code Attachment Code
Standard S Standard S Not provided 000
For heavy-weight materials H To order, please contact your nearest JUKI distributor.
The sewing machine complies with the "Juki Group Green Procurement Guidelines" on the use of
hazardous substances, which is stricter than other restrictions, such as those of the RoHS Directive.
This sewing machine reduces power consumption by 15% as compared with the conventional models.
For details of JUKI ECO PRODUCTS, refer to: http://www.juki.co.jp/eco_e/index.html
The RoHS Directive is an EU Directive limiting the use of 6 hazardous substances (lead, hexavalent chromium, mercury, cadmium, PBB and PBDE) in electrical and electronic equipment.
The Juki Green Procurement Guideline is the voluntarily established criteria to eliminate not only the aforementioned six substances, but also other ones which also adversely affect the environment.