Professional Documents
Culture Documents
Nissan Note E-Power 2022 Quick Guide EN
Nissan Note E-Power 2022 Quick Guide EN
* Please note that the contents of this document may not match the actual vehicle due to changes in vehicle specifications.
Please understand.
1
Machine Translated by Google
For e-POWER drivers
SPORT
e-Pedal Step
time
always occurs
return the accelerator
NORMAL
slow down
speed
time
In SPORT mode and ECO mode, releasing the accelerator pedal decelerates more strongly than in NORMAL
mode.
This reduces the need to switch the accelerator and brake pedals and supports the driver's driving, but
please operate the brake pedal according to the situation.
The e-POWER system may operate the engine in the following situations.
Compared to conventional gasoline engine vehicles, the engine speed during idling is set higher.
• When the lithium-ion battery is running low (for power generation) • When
the brake pedal is depressed (to assist brake pedal force) • When driving on a
long downhill for) etc.
2
Machine Translated by Google
Doors ………………………………………………………………… 35
Useful functions
Intelligent rearview mirrorÿ …………………………………………………………
36 Intelligent around view monitor ( with moving object detection function)ÿ
……………… 37 Advanced Automatic Accident Reporting System
3
Machine Translated by Google
53 Warning message
4
Machine Translated by Google
around the handle
05
06
01
07
02
03 08
09
04
10
03 Light switch…P.10
05 ETC unitÿ
09 Bonnet opener
5
Machine Translated by Google
wiper/washer switch
front wiper
switch position
interval of intermittent operation
Operates while the operation switch is raised 1x short
Releases the switch to turn
OFF
OFF off and
When the switch is pulled forward, the front washer fluid is sprayed and the wipers operate several times.
• At the time of (intermittent operation), the vehicle speed sensing type that automatically shortens the operation interval is set. (This is
because the amount of rain that adheres to the windshield increases as the vehicle speed increases.)
• When the switch is operated, the switch position is displayed on the meter.
rear wiper
Continuous operation
OFF
Pushing the switch toward the front of the vehicle sprays the rear washer fluid and activates the wipers several times.
• When the switch is operated, the switch position is displayed on the meter.
6
Machine Translated by Google
around the handle
•When you
press ÿ, the display ÿ
switches in order of
"power meter", "eco group",
"energy monitor", "navigation
information ", "audio ÿ
information ", "driving
support
group",
"warning", and "setting".• Press
ÿ to return to the previous screen.•
Turn ÿ to select the display menu for each item.
increase.
ahead
NW N NE FM
6:27 setting
drive computer
energy monitor
Drive information 1 VDC settings
rear side lane
driving assistance
Average fuel consumption/vehicle speed mileage/time
Eco
--- km/l 0.0km 87.5 MHz
clock
0 km/h 31:15
vehicle settings
maintenance
OK Reset with long press OK Source
OK menu
• Power •Drive • Energy •Navigation • Audio• Driving assistance• Cruise Displayed if a •VDC setting
meter monitor warning has •Driving
•Compass occurred. support
computer•Average display (CRUISE)•Speed sign •Eco
fuel •Clock
•Vehicle
consumption / setting
Eco
indicator / Eco pedal guide•2- minute fuel consumption
•Maintenance•Screen customization•Unit /
7
Machine Translated by Google
Displays the output (acceleration force) and regeneration amount (recovery amount of electric Neutral position when ÿ
power) while driving. accelerating ÿ
20 40
the gauge ÿ is displayed on the right side ÿ from the neutral position.
80
• Gauge ÿ will increase to the right ÿ when more power is being 100
POWER %
• When recovering power, the gauge ÿ increases from the neutral while harvesting power
position to the left side ÿ. When the gauge ÿ increases to the left neutral position
side ÿ, it means that a lot of power is being collected. 20 40
0
ÿ 60
8
Machine Translated by Google
around the handle
An in-meter display shows the flow of energy between the engine, the lithium-ion battery and
the tires.
ÿ ÿ
•Stored in lithium-ion battery •Using regenerative braking, Lithium •Running using both energy from engine and
regenerative braking
•Energy generated by the engine •Energy generated by the engine •In a state where there is no energy flow, the
vehicle is running and charging, and the lithium-ion battery is charged.
Charging state Engine display color
battery display color 4WD car
Gray: Engine stopped Blue: Remaining battery level is normal •When the •In the 4WD state, the flow of energy
engine is stopped: •Remaining battery level is displayed. Display in gray. on the rear side is also displayed.
Yellow: Low battery level Orange: Engine rotation status •When the battery
level is low, •When the engine is running, the display color changes from blue
to yellow and displays in orange. increase. (When the remaining battery power
is low, the driving output may be lower than usual.)
9
Machine Translated by Google
light switch
Turning the lamp on/off
Turn the switch to align the switch position with the mark.
width lights, tail lights, and number lights automatically turn on/off Turn-only
AUTO the
width
mark
lights, tail lights, and number lights light up (when the vehicle is
/OFF stopped ) Turn and hold for 1
second or longer - All lamps turn off (when stopped)
• When the switch is turned to the /OFF position, the Advanced Drive Assist Display lights up.
off guidance is displayed.
• Even if the switch is turned to the /OFF position, it will automatically return to the AUTO position when the switch is released.
How to use
•Turn the light switch to the position to turn on the side lights and headlights.
•When the power switch is OFF , the light goes out.• When
the power switch is ON , the lights are automatically turned on and off as follows.
–The headlamps and side lights turn off both when the vehicle is stopped and when the vehicle is running.
dark> –The headlamps and side lights turn on automatically both when the vehicle is stopped and when it is running.
<When the light switch is turned to the /OFF position > –When the
vehicle is stopped, the side lights, etc. light up. When driving, the headlamps turn on according to the brightness of the surroundin
Lights up automatically.
–While driving, if the surroundings are bright, the side lights, etc. will turn on. If the surroundings are dark, or if the wipers
are on and the headlamps are on, the illuminated headlamps cannot be turned off. (The light can be turned off only
when the vehicle is stopped.) <When the
light switch is turned to the /OFF position and held for 1 second or longer>
– All lamps are extinguished when the vehicle is stationary. When driving in a dark environment or when the wipers are
operating, the side lights and headlights will turn on.
10
Machine Translated by Google
around the handle
How to turn off the automatic lighting lamp (when the vehicle is stopped)
When the headlamps are on, push the light switch toward the front of the vehicle to switch to high beams.
Move the light switch to the front or rear of the vehicle to return to low beam.
When passing, pull the light switch to the rear of the vehicle. If you want to pass from the high beam state, pull
the light switch to the rear of the vehicle twice .
Whether the light switch is pushed toward the front of the vehicle or pulled toward the rear of the vehicle, it will automatically return to the neutral position when released.
i will be back.
11
Machine Translated by Google
Switches between high beam (upward) and low beam (downward) according to the preceding or oncoming
vehicle and the brightness of the surroundings. When driving at approximately 25km/h or more, the
headlamps are switched on, and at approximately 15km/h or less, they switch to low
•When the light switch is in the AUTO position and the headlamps High beam assist ON
are on, pressing the switch turns on the high beam assist . (The
high beam assist indicator light in the meter lights up.)
High beam assist is turned off when you do any of the following : High beam assist OFF
ÿ ÿ
• When the high beam is on
12
Machine Translated by Google
around the handle
Automatically switches the irradiation range of the high beam (upward) so as not to irradiate preceding and oncoming vehicles.
When driving at approximately 25 km/h or more, the headlights are switched when the headlights are on, and when the speed
drops to approximately 15 km/h or less, they switch to low beam (downward).
• Depending on the surrounding conditions, it may not work properly. Do not rely on the system and manually switch between high
beams (upwards) and low beams (downwards) as needed. For details, please read the vehicle instruction manual.
• Even when detecting an oncoming vehicle or a preceding vehicle and switching the irradiation range, the headlamp is turned upward.
The indicator light may come on. (Because part of the high beam is lit)
13
Machine Translated by Google
The adaptive LED headlight system is switched off when you do Adaptive LED headlight system off
one of the following :
the switch
14
Machine Translated by Google
around the handle
• During operation, the surface temperature of the handle is kept above approximately 20°C.
• Intelligent LI (Lane Departure Prevention Support System) and Intelligent BSI (Rear Side Collision Prevention Support
System) can be switched ON/OFF .
ProPilot ÿ : P.42
turn the dial toward the larger number, the more the direction of illumination will be downward.
For details, please refer to the vehicle instruction manual.
The mirror can be stored in conjunction with the locking of the door.
• The left and right mirrors retract when locked with the remote control or the door handle switchÿ. • When
the power switch is turned on , the left and right mirrors open. (On the display in the meter, you can change
the setting so that the left and right mirrors open when unlocked with the remote control or door handle
switch.)
You can change the setting of the door lock interlocking storage function on the display in the meter. For details, refer to the
vehicle instruction manual.
15
Machine Translated by Google
around the center panel
01
06
02
07
08
03
09
04
10
05
01Navigation systemÿ…P.17
03Wireless chargerÿ…P.23
04 HDMI terminalÿ…P.18
05 Select lever…P.24
06Power switch…P.25
08 EV mode switch…P.29
16
Machine Translated by Google
around the center panel
Navigation systemÿ
Part names and functions
ÿ ÿ
Bluetooth® audio, etc.) (such as changing albums, songs
or folders), and press to adjust the sound quality. If you turn return camera Current location Menu Audio
ÿ button
ÿ / VOL dial
Audio is turned ON/OFF each time the button is pressed.
Rotate to adjust
volume. If the audio is turned off , it will turn on .
17
Machine Translated by Google
ÿ OK switch ÿ
You can select an item by rotating during voice
operation. Press to confirm the selected item. ÿ
ÿ Adjusts ÿ
START
STOP
18
Machine Translated by Google
around the center panel
find a destination
• When the route search condition is set to something other than "energy saving", you can select a route considering fuel
consumption by selecting "Choose another route" ÿ "Energy saving" when the route search result is displayed.
• For details on how to operate the device to be connected, refer to the operation manual of the
device to be connected. • For compatible Bluetooth® mobile phones , see "List of Compatible Mobile
Phones" on the NissanConnect service website (www.nissanconnect.jp ). • You
will be automatically connected after initial registration.
19
Machine Translated by Google
to call
receive a call
When a call comes in, the ringtone sounds and the incoming call screen automatically appears.
of the steering Press the switch or touch “Answer” to start the call.
1
again to end the call Press the switch or touch “End call”.
2
20
Machine Translated by Google
around the center panel
Bluetooth® audioÿ
It can be used as Bluetooth® audio by using a Bluetooth® compatible audio device . Initial registration is
required to connect your Bluetooth® compatible audio device.
ÿ menu
name ÿ
Sources not shown in the audio source bar Album name
21
Machine Translated by Google
ÿ Lo ÿ OFF ÿ Hi .
ÿ Rear window defogger switch Removes fog ÿÿÿÿÿ
on the back door glass. In addition, on vehicles with door
mirror heaters, the heater built into the door mirror operates
to remove frost and fog. ÿ Inside/outside air
selector switch
Every time you press the switch, it switches between inside
air circulation
and outside air introduction. ÿ Driver's
seat heater seat switch ÿ Each time the switch is pressed, it
switches in the order
of Hi ÿ Lo ÿ OFF ÿ Hi . ÿ
Temperature control dial Rotate the dial to change the set
temperature. (Lo 18.0°C
- Hi 32.0°C) ÿ A/C
switch Turns the cooling/dehumidifying function ON/OFF .
ÿ ON/OFF switch
Switches the automatic air conditioner ON/OFF . ÿ
Air outlet switch Switches the air
outlet. ÿ Defroster switch Defog
the windshield. ÿ AUTO
switch Switches to automatic control.
The set temperature
is maintained by automatically controlling the switching of
the air outlet temperature, air outlet, and air volume.
22
Machine Translated by Google
around the center panel
Wireless chargerÿ
The wireless charger is only for charging Qi -enabled smartphones. Can be used when the power switch
is ON .
23
Machine Translated by Google
select lever
How to use the selector lever
P R
Select lever operation
N
Press the button while depressing
the brake pedal.
button
D/B
24
Machine Translated by Google
around the center panel
power switch
Switch mode
When carrying a key (intelligent key / remote control entry system), press the power switch without
stepping on the brake pedal to switch modes.
When the battery of the key (intelligent key / remote control entry system) runs out
When the key (intelligent key / remote control entry system) battery runs out, follow the steps below to
start the e-POWER system.
THIS
• When you take your foot off the brake pedal and press the power switch, the mode will
change.•When stopping the e-POWER system, shift the shift position to P and then press the power switch.
Please press
25
Machine Translated by Google
e-Pedal Step
The e-POWER system has three drive modes . Please use properly according to the purpose.
Functions of each mode
Shift
Mode Accelerator pedal
position feature
(Indicator) Deceleration degree when OFF
economy mode
D -strong – Gentle acceleration to reduce wasted energy consumption
ECO able
ECO – Strengthen the regenerative braking when the accelerator pedal is off ,
stronger than B of energy is recovered – speed
can be easily adjusted simply by operating the accelerator pedal
• The mode setting switches to ECO mode each time the e-POWER system is started .
SPORT
ECO
NORMAL
26
Machine Translated by Google
around the center panel
• In SPORT mode and ECO mode, even if you decelerate without stepping on the brake, the deceleration
The brake lights will illuminate accordingly.
• In SPORT mode and ECO mode , regenerative power is enhanced when the accelerator pedal is off . Therefore, when
the accelerator pedal is turned from ON to OFF , the degree of deceleration may be felt strongly. * Since there is no
function to stop the
vehicle by decelerating by turning off the accelerator pedal , the brake pedal must be pressed when the vehicle is stopped.
Be sure to step in.
• When the lithium-ion battery is fully charged on a long downhill, when the temperature is low, or when the
road surface is slippery, deceleration may be weak.
all modes R
When the power switch is ON , push the drive mode selector toward the front or rear of the vehicle to
switch modes.
•In ECO mode, push the drive mode selector toward the rear of
drive mode
the vehicle to switch to NORMAL mode. Then push forward to selector
switch to ECO mode. SPORT
The NORMAL mode indicator lights when in NORMAL mode . D-MODE
ECO
NORMAL
< How to switch to SPORT mode>
•In ECO mode, push the drive mode selector toward the front of
the vehicle to switch to SPORT mode. Afterwards, push the
button toward the rear of the vehicle to switch to ECO mode.
The SPORT mode indicator lights when in SPORT mode.
27
Machine Translated by Google
When the accelerator pedal is released, the brake lights turn on according to the degree of deceleration that
occurs, and turn off just before the vehicle stops. When the vehicle is stopped, pressing the brake pedal turns
on the brake lights.
*Please note that the brake lights may not turn on if you repeatedly start and stop
the vehicle in traffic jams where deceleration is unlikely to occur.
28
Machine Translated by Google
around the center panel
EV mode switch
charge mode
Forcibly starts the engine and charges the lithium-ion battery. This mode charges the lithium-ion battery in
advance when you want to extend the driving distance in silent mode.
•While the ready-to-drive indicator light is on, each time the EV mode
switch is pressed and held, the charge mode will switch between
ON and OFF . charge mode
•When turned ON , the display in the meter shows the charge mode.
EV mode switch
The indicator lights up.
THIS
• Press and hold the EV mode switch while in silent mode to switch to charge mode. •
Charge mode can be used when the drive mode is SPORT mode or ECO mode.
silent mode
You can run with the engine starting suppressed as much as possible. This mode is used when you want to drive quietly,
such as in a residential area early in the morning or late at night, as it runs on the power of the lithium-ion battery only.
•While the ready-to-drive indicator light is on, each time the EV mode
switch is pressed, the manner mode switches between ON and
OFF . silent mode
•When turned ON , the manner mode indicator lights up on the
EV mode switch
display in the meter.
THIS
• If you turn on the charge mode and increase the lithium-ion battery level, the distance that
you can travel on battery power alone will
be longer. • Manner mode can be used when the drive mode is SPORT mode or ECO mode.
29
Machine Translated by Google
If you pay attention to the following points and reduce power consumption, fuel efficiency will be improved.
• Choose a route that consumes less power (running uphill consumes more power.
Selecting a route with less electricity will reduce power consumption.)
•Do not leave unnecessary luggage on the
vehicle. •Adjust tire pressure when
driving.
30
Machine Translated by Google
around the center panel
The eco mode setting is a function that switches the intelligent cruise controlÿ and air conditioning functions to settings
that focus on fuel efficiency. Customization is possible when the drive mode is ECO mode.
• When "cruise control" is set to ON (priority on fuel efficiency) in the eco mode setting, the acceleration of intelligent
cruise control becomes gentler than when it is OFF , improving fuel efficiency.•When the "air conditioning" is
turned on (priority on fuel efficiency) in the eco mode setting , the cooling effect is weakened compared to when it is
off, improving fuel efficiency.
• By selecting "Settings" ÿ "Eco" ÿ "Eco mode setting" on the display in the 15:00
meter, you can switch ON/OFF of the fuel economy function in ECO eco mode setting
mode .
Cruise control ON
air conditioner
ON
• In the following cases, the air conditioning function takes precedence even if the "air conditioning" is set to ON
(prioritizes fuel economy) in
the eco mode setting. – When the air conditioner temperature is set to Lo (18°C to Hi gives priority to fuel
efficiency) – When the defroster is used
31
Machine Translated by Google
The e-POWER system may operate the engine in the following situations.
• When the lithium-ion battery is low (for power generation) • When the
accelerator pedal is strongly depressed (for power generation) •
When the heater is turned on (to increase the temperature of the engine water,
which is the heat source) • When the engine is cold
(for warming up) •When the hood is opened while the e-POWER system is running (to prevent accidents during maintenan
•During
charge mode (for power generation)
•When the defroster switch on the windshield is turned on
• When depressing the brake pedal (to generate negative pressure for the brake booster) *
•When driving on a long downhill (to generate deceleration) * * The engine
is running but does not consume fuel.
When starting the system or while driving, you may hear a sound unique to e-POWER.
32
Machine Translated by Google
around the center panel
• With the electric parking brake applied, close the driver's door, shift the shift position to
D or R , and depress the accelerator pedal to release the parking brake.
• For details on how to operate the electric parking brake, refer to the vehicle instruction manual.
33
Machine Translated by Google
Auto brake
hold switch
• If the auto brake hold switch is pressed while the auto brake hold function is ON , the switch indicator light will
turn off and the auto brake hold function will be turned OFF .•When turning off the
auto brake hold while the braking force is
Press the auto brake hold switch while depressing the key pedal.
• If you step on the accelerator pedal, the hold will be released and the vehicle will start.
34
Machine Translated by Google
around the exterior
01
02
02 Fuel port
door
When the battery of the key (intelligent key / remote control entry system) runs out
When the battery of the key (intelligent key / remote control entry system) runs out or the 12V battery runs out, the
mechanical key locks/unlocks the door.
Remove the mechanical key while pushing the lock knob lock knob
mechanical key
Insert the mechanical key into the keyhole and turn it toward
2 the front of the vehicle to unlock. Turn to the rear of the vehicle locking
Unlock
to lock.
35
Machine Translated by Google
useful function
• In the room mirror mode (mirror surface) before driving, turn the mirror
Use after adjusting the angle of the main unit.
• To switch to the intelligent rearview mirror mode (monitor display), turn the
power switch ON and pull the ON/OFF switching lever forward. (The
operation indicator lights up.) •To switch to the rearview mirror mode
operation indicator light
• If it is difficult to see due to the brightness of the surroundings or if you feel dazzled, turn off
the intelligent rearview mirror mode (monitor display) and use the rearview mirror
mode (mirror surface). • In intelligent rearview mirror mode (monitor display), the intelligent
around view monitor can be displayed. (Vehicles without manufacturer's optional navigation
system)
• When the intelligent around view monitor screenÿ is not displayed in the
intelligent rearview mirror mode, various adjustments can be made to the
monitor image.
36
Machine Translated by Google
useful function
camera button
• When the shift position is set to R , the Intelligent Around left screen right screen
View Monitor turns on and displays the top view (left side
screen)/rear view (right side screen). Shifting the shift position
from R to any other position will turn off the Intelligent Around
View Monitor .
•When the shift position is D or B , when the sonar detects an
obstacle, the Intelligent Around View Monitor turns on and Check the safety around the vehicle directly.
•When you press the A button on the intelligent rearview mirror (vehicles without a manufacturer's
option navigation system) or the camera (vehicles with a manufacturer's option navigation system),
the Intelligent Around View Monitor is turned on and the top view (left screen)/front view ( right
screen).
37
Machine Translated by Google
When you press the ÿ button on the intelligent rearview mirror (the ÿ button when the intelligent
around view monitor is displayed on the right side) (vehicles not equipped with the manufacturer's
optional navigation system) or the camera (vehicles equipped with the manufacturer's optional
navigation system), the screen is
displayed . You can switch. –When
the shift position is R : Top view (left screen) / Rear view (right screen) ÿ Side blind view (left
screen) / Rear view (right screen) ÿ Rear view (full screen) ÿ Intelligent around view monitor
OFF
–When the shift position is other than R :
Top view (left screen) / Front view (right screen) ÿ Side blind view (left screen) / Front view
(right screen) ÿ Intelligent Around View Monitor
OFF
This function detects moving objects around the vehicle when entering the garage or starting from a parking lot, and notifies the driver of the
moving objects by displaying a sound and a yellow frame.
When the function is activated, the moving object detection function operation status icon is displayed in blue.
38
Machine Translated by Google
useful function
You can start an SOS call by pressing the SOS call switch. Also, in the event of an accident (when deploying SRS airbags, SRS side airbags, SRS curtain airbags,
• Depending on the situation, you may receive a call back from the
operator or an incoming call from a public institution (police, fire
department, medical institution). When receiving an incoming call,
the voice connection
is automatically established. • After the call is over, put the cover back
on and press until it locks.
• SOS call is a service that helps you contact the police, fire station or medical institution in case of emergency such as
sudden illness, crime or
accident. • During a call with an SOS call service operator or public institution, the call can be ended from the vehicle.
cannot be set.
The advanced automatic accident notification system can be used by applying for the NissanConnect service.
can be used.
• After contracting the SOS call service, complete the initial settings at a Nissan dealer. • For details on
how to operate the advanced automatic accident notification system, please refer to the vehicle instruction manual.
39
Machine Translated by Google
Driving support function
CAUTION Driving assistance functions are intended to assist the driver in driving safely, and are not intended to avoid
collisions in all situations. Drivers should always be aware of their surroundings and drive safely without relying on the
system. *There are
important warnings and precautions, so be sure to read the vehicle instruction manual before use.
• Intelligent emergency braking operates from a vehicle speed of approximately 5km/h . Pedestrians
and bicycles with people on them operate within the range of approximately 10km/h to 80km/h . ( It does not
operate for stopped vehicles at vehicle speeds of approximately 100 km/h or more.)
• When the accelerator is strongly depressed, the steering wheel is turned sharply or quickly, and the danger of
colliding with a vehicle ahead, pedestrians, or a bicycle with people on board is eliminated, the brake operation
is released.
•You can turn it off from the display in the meter . For more information driving assistance
handle assistance ON
emergency brake ON
•When the intelligent emergency brake is turned off , the warning light
Speed sign indicates ON
• Even if the setting is OFF , it will be ON when the e-POWER system is restarted . • When
the intelligent emergency brake is turned off , the intelligent FCW (front
collision prediction warning) and misapplication collision prevention assist are also turned off .
40
Machine Translated by Google
Driving support function
Pedal Misapplication Collision Prevention Assist has the following two functions.
• When moving forward (including when stopped), if obstacles such as vehicles, pedestrians, and walls are detected in the direction of travel,
If the accelerator pedal is depressed more than necessary, an alarm is issued and acceleration is suppressed.
• If you depress the accelerator pedal more than necessary while reversing (including when the vehicle is stopped) and an obstacle such as a wall is detected
in the direction of travel, an alarm will be issued and acceleration will be suppressed.
When the system detects obstacles in the direction of travel when moving forward, backward, or in the direction of travel, and if the system determines that
there is a risk of collision, it controls the output of the e-POWER system and applies the brakes to avoid collisions or reduce damage. .
• The low-speed collision mitigation brake function operates at vehicle speeds in the range of approximately
2 to 15 km/h . • If you step on the accelerator pedal slowly, it will not work even if you step on it deeply. •
After the low-speed collision mitigation brake function is activated, it will not activate again even if you get closer to an obstacle.
plug.
• In the following cases, the low-speed acceleration suppression function will be canceled and normal acceleration will return.
– When the accelerator pedal is released and then stepped on again – When the
When Intelligent Emergency Braking is turned off , Intelligent FCW (Forward Collision Prediction Warning) and Pedal Misapplication Collision Prevention
• You cannot turn off only the misstep collision prevention assist .
41
Machine Translated by Google
professional pilot
ProPILOT assists the driver in driving in the center of the lane while maintaining a distance between the vehicle and the
vehicle ahead according to the vehicle speed, up to the vehicle speed set by the driver.
propilot display
Meter display items Steering Indicates the content ÿÿÿ ÿÿÿÿÿ
wheel assist operating
ÿ Lights up in green during steering support. 12:59PM 100 0C
status ProPILOT
vehicles Displays the setting status of the distance between vehicles. Lane detection
Gray ÿ
ÿ
No lane detection Leading
42
Machine Translated by Google
Driving support function
How to set
D
NORMAL
ok menu
• When starting following the preceding vehicle while stopped by the ProPILOT,
Press the CANCEL switch in the RES+ direction or step on the accelerator pedal. When
• you press the switch to turn it on , the intelligent BSI (rear side collision prevention support system)
system) and Intelligent LI (Lane Departure Prevention Assistance System) are also turned on .
• If you press the switch for about 1.5 seconds or more, it will switch to the constant speed control function, and you
can drive at a constant speed without stepping on the accelerator pedal. (Steering wheel control and vehicle distance control are not
performed.)
How to unlock
• If the ProPilot is released while the ProPILOT is holding the stopped state, the electric
The parking brake will apply.
• Pressing the CANCEL switch or stepping on the brake pedal also cancels temporarily.
• If you want to increase the set vehicle speed, push the CANCEL
switch in the RES+
direction.• To lower the set vehicle speed, push the CANCEL switch
in the SET direction.
43
Machine Translated by Google
100
km/h
D
• Every time you press the switch, it switches in the order of “Long” ECO
call at
Each time you press the steering wheel assist switch, you can switch ON/OFF of the steering wheel assist.
By selecting "Settings" ÿ "Driving Assistance" ÿ "Steering Assistance" on the display in the meter, you can
switch the steering assistance ON/OFF .
ON/OFF method
You can set ON / OFF on the display in the meter . For details, refer to the vehicle instruction manual.
44
Machine Translated by Google
Driving support function
When the driver is unintentionally about to leave the driving lane, a warning sound
(buzzer) and display are displayed, the brakes are controlled, and control force is
generated for a short time in the direction that the vehicle turns, allowing the driver to
move the vehicle out of the lane. Prompts you to return it inside.
ON/OFF method
<Vehicles with Intelligent BSI (Rear Side Collision Prevention Support System)>
• When "Settings" ÿ "Driving Assistance" ÿ "Side Assistance" ÿ "Lane Departure Prevention Assistance" is ON on the meter
display, the steering switch (vehicles with ProPILOT) or the safety shield switch ( Press the ProPilot car) to turn on the
system. For details, refer to the vehicle instruction manual.
<Vehicle without Intelligent BSI (Rear Side Collision Prevention Support System)>
• Press the safety shield switch to turn on the system. For details, refer to the vehicle instruction manual
Please refer to the.
ON/OFF method
•ON / OFF can be set on the display in the meter . For details, see the vehicle instruction manual.
please.
45
Machine Translated by Google
When a vehicle in the next lane is detected, if the direction indicator is activated on
the side of the vehicle that is being detected, a warning sound (buzzer) will be heard
and the BSW (rear side vehicle detection warning) will be displayed on the display
inside the meter . , the indicator light on the door mirror surface flashes.
ON/OFF method
You can set ON / OFF on the display in the meter . For details, refer to the vehicle instruction manual.
If the driver starts to change lanes when there is a vehicle in the adjacent
lane, the system will generate a force to return the vehicle to the original
lane along with an alarm to help avoid contact with the adjacent vehicle.
ON/OFF method
When "Settings" ÿ "Driving support" ÿ "Rear side support" ÿ "Rear side collision prevention support" is ON on the
display in the meter, the steering switch ( vehicles with ProPILOT) or the safety ÿ Press the shield switch (without
ProPILOT) to turn the system ON . For details, please refer to the vehicle instruction manual.
46
Machine Translated by Google
Driving support function
ON/OFF method
You can set ON / OFF on the display in the meter . For details, refer to the vehicle instruction manual.
ON/OFF method
You can set ON / OFF on the display in the meter . For details, refer to the vehicle instruction manual.
be careful
ON/OFF method
You can set ON / OFF on the display in the meter . For details, refer to the vehicle instruction manual.
47
Machine Translated by Google
100
P
ON/OFF method
You can set ON / OFF on the display in the meter . For details, refer to the vehicle instruction manual.
When Intelligent Emergency Braking is turned off , Intelligent FCW (Forward Collision Prediction
Warning) and Pedal Misapplication Collision Prevention Assist are also turned off .
48
Machine Translated by Google
Let's make full use of NissanConnect
By subscribing to the NissanConnect service, you can use various connect services.
1
Acquisition of "User ID" and
2
"Password" In order to use various services of the NissanConnect service, it is
necessary to acquire a user ID and password and register from the
navigation unit. A user ID and password will be issued after subscribing to the
NissanConnect service (charged).
For details, please refer to the service search page by vehicle type on the NissanConnect
service site (https://www3.nissan.co.jp/connect.html ).
49
Machine Translated by Google
When you set your destination from the app, the route will be searched and automatically linked to the navigation when you
get in the car. Even after getting off the vehicle, the final destination will be linked to smartphone navigation such as Google
Maps after the navigation link setting is displayed, enabling door-to-door navigation.
used to search for destinations . You can search for facilities and stores by entering keywords, just like searching on a
smartphone. You can also check the details from the “more” menu, and see aerial photos and street views.
navigation
With Google Maps on your smartphone , you can get seamless guidance from your starting point to your final destination.•
Drive history
You can check the past driving history (driving time, mileage, average fuel consumption, etc.) in numerical values and graphs.
the contents of this document may not match due to changes in the specifications of the app.
please.
50
Machine Translated by Google
Let's make full use of NissanConnect
• Receive route settings from the smartphone app and link the vehicle destination to the app.
If you turn off the setting on the vehicle side , it will not work on the app.
• You can set whether or not to notify the app about route guidance with smartphone navigation to the destination.
increase.
• The smartphone app functions and notification content may change due to updates, etc.
I have.
Notifications may appear differently depending on your device
settings. • It may take some time to notify you depending on the radio wave conditions.
51
Machine Translated by Google
Memo
Machine Translated by Google
Meter warning light/indication light
If the warning light continues to illuminate or flash, refer to "When the Warning Light Comes On" in your
vehicle's owner's manual and contact your Nissan dealer.
53
Machine Translated by Google
ÿ ABS warning
light•When the power switch is ON , it lights
up if there is an abnormality in the ABS system. ÿVDC warning
light•When the power switch is ON , it flashes when
ÿVDC OFF Indicator Lights VDC operates.
when the power switch is ON and the VDC is OFF .
ÿMalfunction warning light
(MIL)•While the e-POWER system is operating, it
ÿElectrically controlled shift lights up or flashes if there is an abnormality in the
warning light•Lights up if there is an abnormality in the engine electronic control system.
electronically controlled shift when the power switch is ON .
ÿOutput limit
ÿ e-POWER system warning indicator•Lights up when the power switch is ON
light•When the power switch is ON , the and the lithium-ion battery level is extremely low.•
e-POWER system will light if an error occurs. Lights up when the temperature of
the driving motor, lithium-ion battery, etc. becomes
ÿEPS (Electric Power Steering) warning light•Lights extremely high due to continuous uphill driving,
up if there is a problem with the electric power steering etc.•For other lighting, refer to the vehicle
system while the e-POWER system is operating. instruction manual.
light•Lights up when the fuel level is low when the light•Lights up when there is an abnormality in the vehicle
light•When the e-POWER system is operating , it temperature indicator light•Lights up when the engine
charging system.
54
Machine Translated by Google
warning message
ÿ e-POWER system start display when the intelligent key is not activated•When
Touch the intelligent key the battery of the key (intelligent key/remote control entry system) runs out or depending on the
to the power switch
usage environment, communication between the key (intelligent key /remote control entry
system) and the vehicle may occur. is displayed when the operation is not performed normally.
the light switch is in the position – When the light switch is turned to the /OFF position and the tail lamp
indicator light in the meter is illuminated
warn
ÿ P Return Forgotten
put it in the P range
Warning •Displays when the shift position is other than P and the driver's door is opened.
55
Machine Translated by Google
operation.
AUTO HOLD ÿAuto brake hold steep slope operation display •Appears
Please step on the brake on and a buzzer sounds when the brake is not stepped on for about 3 minutes after the auto brake hold is activated
a steep slope. The
car may move. on a steep slope .
AUTO HOLD ÿ Auto brake hold switch release operation display •Displayed
It can be released when the auto brake hold switch is pressed without depressing the brake pedal while the auto brake hold is
by stepping on the brake and
operating the switch. operating.
ÿRemaining fuel
please refuel
warning •Displays when fuel is low.
warn
ÿOverheat warning •Displayed
Overheating
Park the car in a safe
place and see the owner's manual
when the temperature of the engine cooling water becomes abnormally high.
warn
ÿChassis control display •It
Chassis
control is displayed when there is an abnormality in the chassis control system.
system failure See owner's manual
warn
ÿIndication when the misapplication collision prevention assist
The misapplication collision
prevention assist has been activated. is activated •Displays when the misapplication collision prevention assist is activated.
warn
ÿHeadlamp warning•Displays
Headlamp system
malfunction See owner's manual when there is an abnormality in the LED headlamp.
System •ProPILOT, Intelligent Emergency Brake, Collision Prevention Assist for misapplication, BSW (Rear Side Vehicle
failure See instruction manual
Detection Warning), Intelligent BSI (Rear Side Collision Prevention Support System), LDW (Lane Departure
Warning), Intelligent LI (Lane Departure Prevention Support System), Intelligent FCW (Forward Collision
Warning), RCTA ( Reversing Vehicle Detection Alert), and sign detection function malfunction.
warn
ÿIntelligent DA (sway alarm) system error warning •Displays when there is an
Wobbling alarm
System failure error in the intelligent DA (sway alarm).
56
Machine Translated by Google
Memo