Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

Experience the

Effectiveness

BIPHASIC DEFIBRILLATOR

DF 2617/AED/R

www.bplmedicaltechnologies.com 0843
Product Specifications

AC Input 100 – 230 V AC ± 15% ; 50 / 60 Energy Selection 2 – 300 Joules in steps of 2, 3, 5, 7,


Hz without adjustment. 10, 20, 30, 50, 70, 100, 150, 200,
250, 300 Joules
Power Consumption < 70 VA
Energy Select Controls Keys on front panel
Battery Type Rechargeable Sealed Lead Acid Paddle Assembly Detachable type external paddle
12V, 4.5AH assembly with coiled high voltage
cable.
Battery Capacity More than 100 discharges of 300
Adult and Paediatric paddles
Joules (With new and fully charged
integrated into same handle
battery)
Charge Control Momentary CHARGE key on the
Battery Charging Time Approx. 3 hours to 90% of full
Saving lives through enhanced capacity. 18 hours to 100%
front panel and on the APEX
technology with improved paddle.
capacity.
safety and effectiveness Charge Ready Charge done LED on the front
Dimensions 260mm (W) x 280mm (D) x 250mm Indication panel CHARGE key and Charge
(H) done LED on the APEX paddle.
Charge done tone, which can be
Weight < 10.5 Kg. (including battery,
Biphasic Waveform disabled by user.
LCD Display external paddles)
The current-controlled biphasic waveform LCD display provides crisp and accurate readings Disarm Control Pressing ENERGY SELECT
Environmental
lowers the electrical threshold for successful with better contrast and brightness control after charging has started.
defibrillation, besides adjusting for impedance Operating 0 to 400C Automatic disarm after 60 seconds
Remote Charging Through Paddles Temperature from charge ready, if shock is not
1-2-3 Operation Remote charging and discharging through paddles delivered.
Temperature -10 to 60, -10 to 70 (DF 2617
12
3 The machine incorporates easy-to-use 1-2-3 facilitates easy charging for convenient use AED/R) Synchroniser Energy delivered within 50mSec.
operation
Relative Humidity 15 to 95% non condensing, 30- of detected R wave peak.
Optional 95% (DF 2617 AED/R) SYNC message displayed on
High Energy Efficiency DF 2617 R/DF 2617AED R comes with a printer screen. SYNC LED illuminates in
100 charge/discharge of 300J with fully charged Relative Humidity 15 to 95% non condensing
(Storage) Sync mode and blinks during each
new battery Prompts for User** detected QRS wave. Sync marker
The voice and visual text prompts guide the user Standards appears on bothscreen and
24 Event Recording through the rescue process of the patient Classification Class 1 with internal power recorder strip.
Records the heart rate and rhythm and provides supply as per IEC 60601-1
REC Delivered Energy Delivered energy displayed on the
the ability to easily archive and review up to 24 Guided CPR** Degree of Protection screen after each shock.
recorded event data Guided CPR helps in providing a step by step voice
ECG Input Type CF Actual patient impedance is
instructions on how to perform safe CPR
displayed on the screen during
Paddle Input Type BF shock.
Noiseless Thermal Printing Selectable Energy Protocols**
Allows the printing of recorded events using a high- Different levels of energy can be selected based Defibrillator
Charge Time 300 Joules in less than 10 seconds
resolution thermal print at reduced noise level on the requirement Defibrillator Current controlled Biphasic
with fully charged new battery.
Waveform Waveform
CE marking is applicable for DF2617/R ** Features are available on DF2617 AED/R
Product Specifications
Monitor AED (applicable in DF 2617 AED/R)
Display Size 5.7” STN LCD Display Energy @ 50 Ω Adult: 200J- 300J
Sweep Speed 25 ± 1 mm/sec Waveform Current control Biphasic Waveform
ECG Input Modes ECG input through paddles or 3 lead Preset Energy Lo=200J, Hi=300J (Programmable
patient cable Patterns for initial 3 Shocks)
User Gain Settings 8 level setting: x0.25, 0.5, 0.75, 1.0, AED Mode Select Momentary AED ON/OFF key on
1.5, 2.0, 3.0 & 4.0 Controls front panel to enter/exit AED mode
1mV Calibration A vertical bar line is displayed Charge Ready Display/Voice command
continuously at the left end of trace. Indication
The height varies with gain setting Printer (Optional)
and indicates height of 1mV signal.
Paper Speed 25 ± 1 mm /Sec
Reset Recovery Automatic recovery of waveform
within 0.5 seconds after electrical Paper Size and Type Thermal paper in rolls. 50 mm width,
overload or defibrillation. 20 meters.

CMRR > 90 dB @ 50 Hz Print Width 40mm


Input Impedance > 2.5 M Ohms Print Channel 1
Frequency Response 0.5-35 Hz Event Recording Stores and prints 3 seconds of pre
Heart Rate Display 10 to 300 BPM critical data and 7 seconds post
critical event data up to 24 events.
Heart Rate Accuracy ±2 BPM or ±2% whichever is higher Data is retained even after unit is
Heart Rate Alarms Audible tone is generated if HR turned off.
limits are violated. Print Annotates Time, Date,HR, HR Limits, Event
Three sets of high and low alarm Marker, ECG Input Source, ECG Gain,
limits are available. Defibrillator Mode, Selected and
The limits are configurable in the Delivered energy, Patient Impedance
setup menu from 20-300 BPM in and Hospital Name
steps of 1BPM
Recorder Mode Configurable to print either real time
QRS Tone User adjustable audible tone with or 6 seconds delayed ECG.
every detection of QRS Standard Accessories
Defibrillator-Paddles 1 no.
Alarm / Alert Tone User adjustable audible tone for
(Adult & Paediatric)
alert message and HR alarm
Disposable 1 pkt
ECG Out 1V/mV Electrodes
Defibrillator Yes Power Cord 1 no.
Protection Accessory Bag 1 no.
Freeze Yes (In models without recorder) Cardijelly 1 no.
Freezes the ECG trace on the screen.
MARK key is used to FREEZE and Patient Cable 1 no.
remove the FREEZE condition. HR User Manual 1 no.
display and Alarm limits will be still
Recording Paper 1 no.
active.
(20M roll)

CERTIFIED ISO 13485:2003, ISO 9001:2008 COMPANY


BPL Medical Technologies Private Limited
Regd. Office: 11th KM, Bannerghatta Road,
Arakere, Bangalore - 560076, India.
Toll Free: 1800-4252355
Website: www.bplmedicaltechnologies.com
For Enquiries: sales.medical@bpl.in
Follow us on
CIN: U33110KA2012PTC067282
© 2015 BPL Medical Technologies Private Limited. All rights reserved. BPL Medical Technologies Private Limited reserves the right to make changes in product 2617/AED/R:RG:12:15:2PGB
features, specifications, aesthetics and/or to discontinue the same at any time without notice or obligation

You might also like