Professional Documents
Culture Documents
Edc Med 17 User Manual
Edc Med 17 User Manual
Edc Med 17 User Manual
User Manual
Engine tuning
Table of contents:
Accessories ABT EDaS programming equipment Page 4
Installation laptop and software page 5
ESD workstation Page 6
Opening of the electronic control unit Page 8
EDC / MED 17 software Page 10
Electronic control unit types and software choice Page 18
Connection of the electronic control unit Page 25
Reading and writing of datasets Page 30
Closure of the ECU Page 34
Miscellaneous Page 35
Support Page 36
User Manual
• ESD workstation
• ABT laptop
• EDaS programming tool
• External power supply unit for OBD tool
• External power supply unit for connecting plug
• Connection plug for ECU
• Fixation of the electronic control unit with a pin
• USB cable
• Software
System
D:\EDaS
D:\EDaS\Datasets
D:\EDaS\User manuals
D:\EDaS\Forms
D:\Project Abt
D:\Project Abt\2.02
• In the EDaS folder you will find the current EDC / MED 17 software.
• Furthermore, there are the file folders "Datasets", in which you save
the serial readout, the file folders "User manuals" and "Forms". Here
the corresponding documents are backed-up.
• In the file folder "Project Abt\2.02" the drivers for the EDX and the
OBD software are stored.
ESD workstation
• Today, in the electronics, devices and integrated circuits with field
effect transistors are used to an increasing degree. Those as well as
related systems enjoy increasing popularity due to technical
advantages.
However, these devices do not only have advantages when it comes to
manufacturing or repairing because voltage sources are not much
attenuated due to the high input resistance.
Electrical voltages over approximately 100 volts which can result from
electrostatic charging or from interferences from the main power
supply can damage or even penetrate the depletion layer and can lead
to a total failure of the component. To avoid failures of such or similar
components during opening, reading or writing, strictly obey the ESD
precautions (Susceptibility to Electrostatic Discharges) and use
appropriate devices. (Are already provided by us). For this reason, we
offer a complementary ESD workstation.
ESD workstation
It includes:
• a floor mat
• a table mat
• a wristband
• a connecting cable
• as well as a connection
to the net (grounding).
• Device - Firmware -
Update F8 Î A function
to update the software
online
• This update may only be
carried out at Abt
Sportsline's disposition!
• Extras - Adjustment of
processor and COM from TCX
file Î A check mark must be
made here to be able to program.
• Extras - Language Î Here cou
can change the language from
German to English.
• Adjustments - Proxy
server Î Here a proxy
can be entered separately
SEITE 20
EDC / MED 17
SEITE 21
EDC / MED 17
SEITE 22
EDC / MED 17
SEITE 23
EDC / MED 17
SEITE 24
EDC / MED 17
SEITE 25
EDC / MED 17
SEITE 26
EDC / MED 17
SEITE 27
EDC / MED 17
SEITE 28
EDC / MED 17
SEITE 29
EDC / MED 17
SEITE 30
EDC / MED 17
SEITE 31
EDC / MED 17
SEITE 32
EDC / MED 17
SEITE 33
EDC / MED 17
SEITE 34
User Manual
• After the dataset has been successfully read out you have to order
the tuning dataset in the dealer portal.
• www.abt-sportsline.de
Miscellaneous
Support
Working hours
Abt Sportsline GmbH:
Monday to Friday
800 – 1730
SEITE 46
User Manual
Technical support
SEITE 47
User Manual
Technical support
SEITE 48
THANK YOU FOR
YOUR ATTENTION
www.abt-sportsline.de