Professional Documents
Culture Documents
Service Reort
Service Reort
info@bct-ng.com E-mail
Analytical System & Industrial Process Control
www.bct-ng.com Websit
No 3, Okunmade Street, Mokola, Ibadan, Oyo State,
Nigeria.
e
REPORT
To : INTERNALTIONAL BREWERY PLC,
SAGAMU OGUN STATE .
Attention : MR SEGUN ADEYENI
From : Simon David
E-mail : info@bct-ng.com
simon.david@bct-ng.com
Direct dial : (+234) 70 693 444 85
Our ref. : 20200219/Eoa/intlbrwplc-sag/sla.38
No. of pages : 4
Date : 29 th March, 2022
Dear Sir,
Please find below the service report for the first biannual 2022 preventive maintenance.
....together to succeed!
(RPU 352) status Not ok needs to be replaced for proper functionality.
SN:98039
RT: 1483
7 REDPOST MONITOR 352 1 Equipment - Service and cleaning of the equipment was carried
SN::98040 status ok. out; Calibration and temperature check with
RT: 3521 Haffmans 60, k Plug, and communication test plug all
confirmed the equipment ok.
- The probe socket should be lubricated after
every 50 runs using the Haffmans contact
treatment grease.
8 REDPOST MONITOR 352 1 Equipment - Service and cleaning of the equipment was carried
SN::98245 status ok. out; Calibration and temperature check with
RT: 470 Haffmans 60, k Plug, and communication test plug all
confirmed the equipment ok.
- The probe socket should be lubricated after every
50 runs using the Haffmans contact treatment
grease.
9 ORBITAL SHAKER 1 Equipment - The speed regulator was checked for
SN:01014617110190 status ok. continuity and confirmed ok, the
- Electric motor bearings and belt were also
confirmed ok, a
A tachometer was used to confirm the accuracy of
the speed.
10 RECIPROCAL ORBITAL 1 Equipment - The speed regulator was checked for
SHAKER status ok. continuity and confirmed ok,
SN:01814127 - Electric motor bearings and belt were also
confirmed ok,
- A tachometer was used to confirm the accuracy of
the speed.
11 FORCED AIR DRYING OVEN 1 Equipment - The temperature accuracy was confirmed ok using
SN:BOV-V225F status ok. a reference thermometer.
- Safety thermostats, relay, cut-off temperature,
circulating fans and the earthling system were all
confirmed ok.
12 ELMA ULTRASONIC BATH Equipment - The temperature accuracy was confirmed ok using
S/N:100525048 status and a reference thermometer.
S/N:100526048 handling ok. - Safety thermostats, relay, cut-off temperature,
circulating fans and the earthling system were all
confirmed ok.
15 BOECO ANALYTICAL 5 Equipment - Service and calibration check with standard
BALANCE status ok weights of 10g, 50g & 100g respectively were carried
SN:553196/17 out and the equipment was confirmed ok.
SN:588227/17
SN:566539/17
SN:553192/17
SN:553195/17
15 HG-80 AUTOCLAVE 2 Equipment - The temperature accuracy was confirmed ok using
SN:32717100290 status ok a reference thermometer at the different points of
SN:32717100284 temperature till the sterilizing temperature.
- Earthling system, safety thermostat and the cut-
off temperature were all confirmed ok.
16 VIBRAC TORQUE METER 1 Equipment - Servicing and cleaning of clamp, sensor unit, drive
SN:18-0215 status ok. unit and column were carried out; earthling systems
were check and confirmed ok.
- Calibrations with known standards weight were
also carried out and the equipment was confirmed
ok.
17 AGR TOPWAVE HOT CUTTER 1 Equipment - The equipment was cleaned and the wiring and the
SN:N/A status ok. outings were checked, the hot cutter were checked
for tension and equipment was confirmed ok.
18 BIOBASE FUME CUPBOARD 1 Equipment - The equipment was cleaned and the wiring and
SN:FH18X1804008 status faulty. outings were checked, and errors corrected.
Control Panel is - The control panel is faulty making it beeping alarm.
weak
19 YAKOS LAMINAR FLOW 3 Equipments - The equipment was cleaned and wiring and
SN:AHA1803020 status ok. outings checked, alarm corrected also.
SN:AHA1803018
SN:AHA1803019
20 FLASH POINT TESTER 1 Equipment - The equipment was checked and cleaned and
SN:GA-1406-EN-2328001 status ok .but outings checked but the ignition is fault.
bad ignition.
21 AGR PGT800T 1 Equipment - The equipment was checked and cleaned and
SN:413 status ok. outings checked also and was confirmed ok.
22 PARR CALORIMETER 1 Equipment - The equipment was checked and cleaned and was
SN:PARR6100-1808-90852 status ok. confirmed ok.
Simon David
Service Engineer