Professional Documents
Culture Documents
936 Torque Trans
936 Torque Trans
1. Fasten a 3/4"-10 NC forged eyebolt (2) and a hoist to torqe converter (3) as shown.
2. Make sure O-ring seals (1) are in position on the transmission case, and put clean transmission oil on them.
3. Install O-ring seal (5) around the transmission case, and put clean transmission oil on it.
4. Put torque converter (3) in position on the transmission with dowels (4) on the transmission in alignment with the holes in the torque converter
housing. Install the nuts and bolts that hold it in place.
5. Check O-ring seal (6) on the shaft for wear or damage. If necessary, make a replacement.
6. Install O-ring seal (7) on the transmission pump, and put clean transmission oil on it.
7. Put transmission oil pump (8) in position on the torque converter, and install the six bolts that hold it.
8. Put tube assembly (9) in position on the transmission oil pump and transfer gear case. Install the four bolts that hold it.
10. Put O-ring seal (10) in position on the hydraulic pump, and put clean transmission oil on it.
11. Put hydraulic pump (11) in position on the transmission oil pump, and install the two bolts that hold it.
https://sis2.cat.com/#/print-preview/service/%257B%2522title%2522%253A%2522Torque%2520Converter%252C%2520Transmission%2520And%2520Transfer%2520Gears%2520(SENR2911-01)%2522%252C%2… 1/2
12/05/2022 23:22 SIS 2.0
12. Install O-ring seals (12) on outlet relief valve (13), and put clean transmission oil on them.
13. Put outlet relief valve (13) in position on the torque converter, and install the three bolts that hold it.
END BY:
PPS-000017F8
2022/05/12
22:21:48+01:00
SENR29110026
© 2022 Caterpillar Inc.
Caterpillar:
Confidential Green
https://sis2.cat.com/#/print-preview/service/%257B%2522title%2522%253A%2522Torque%2520Converter%252C%2520Transmission%2520And%2520Transfer%2520Gears%2520(SENR2911-01)%2522%252C%2… 2/2