Professional Documents
Culture Documents
51 Exterior
51 Exterior
51 Exterior
GROUP 51
CONTENTS
GENERAL INFORMATION
M2510000100387
Completely new front mask with Mitsubishi three-dia- 7. Low air-resistance door mirrors have been
mond logo clear outline and progressive side view adopted.
compact, yet stable rear view with these, this vehicle
BETTER USER-FRIENDLINESS
has established a new standard for the design of the
8. Electric remote controlled mirrors have been
new-generation compact car.
installed. <Optional>
9. Heated door mirrors have been installed.
FEATURES <Optional>
BETTER APPEARANCE BETTER PRODUCT PACKAGE
1. A new three-diamond mark matched with new 10. Bumper protector has been installed.
front design is adopted. 11. Side protector moulding has been installed.
2. A radiator grille integral with front bumper has 12. A headlamp washer has been installed.
been adopted. <Optional>
3. 2 types of side bezels are available. 13. Comes with a vehicle speed sensitive intermittent
4. A rear wiper with resin arm has been adopted. time variable windshield wiper.
BETTER AERODYNAMIC CHARACTERISTICS SUPPORT RECYCLING OF RESOURCES
5. Front air dam has been fitted. Aggressively uses PP materials that are easy to
6. Front under cover has been fitted. recycle and easy to stamp material symbols on the
plastic (resin) parts.
13
4 7, 8, 9
2
12
6 3 10
5
11
10
AC311182 AB
EXTERIOR 51-3
BUMPER
BUMPER
M2510002000331
• The front bumper with air dam reduces the • Weight saving, reparability, and recycle efficiency
amount of the airflow to the tires. The front have been improved.
bumper is bulged at the corners to smoothen the • Separated protector or moulding for low repair
airflow to the vehicle sides. cost.
• On the bumper, metal reinforcement has been • 2 type of bezel.
eliminated, and resin side brackets have been
adopted. CONSTRUCTION DIAGRAM
Protector moulding
Resin bracket
Front bumper
Airintake bezel
Foglamp bezel
Protector moulding
Rear bumper
AC312490AB
51-4 EXTERIOR
AERO PARTS
AERO PARTS
M2510003000185
Front air dams and under cover improve aerody- CONSTRUCTION DIAGRAM
namic characteristics and appearance.
Under cover
AC312376 AB
• The washer-linked wiper function* has been intro- NOTE: **: The vehicle speed-sensitive intermittent
duced. The washer fluid can be injected without time variable wiper function and the washer-linked
operating the wiper. When the ignition switch is wiper function can be switched optionally. Refer to
turned ON while the washer switch ON, the Group 54B, Customise Function P.54B-19.
washer motor operates but the wiper does not. CONSTRUCTION DIAGRAM
Wiper arm
Washer hose
Washer nozzle
Washer tank
AC312495 AB
51-6 EXTERIOR
WIPER AND WASHER
Windshield
Washer motor
Injection
port
changer
AC312784 AB
EXTERIOR 51-7
WIPER AND WASHER
Injection
Washer motor port
changer
When the washer motor operates, the screw in the • The washer tank is commonly shared with the
washer motor is rotated, and the washer fluid is flown windshield washer.
into the injection nozzle. The washer motor applies • The initial continuous operation function has
pressure to the injection port changer using the flown been adopted. In this function, the rear wiper per-
washer fluid and screw, closes the opposite injection forms continuous low-speed operation for 2 to 3
nozzle, and then injects the washer fluid over the cycles to sweep the raindrops away from the rear
windshield or the tailgate glass. Operation of the screen after the rear wiper switch is turned on,
windshield washer and the rear washer is switched and then proceeds with the intermittent operation.
by reversing the direction of an electric current flown • The washer-linked wiper function* has been intro-
through the washer motor. duced. The washer fluid can be injected without
operating the wiper optionally. When the ignition
REAR WIPER AND WASHER switch is turned ON with the washer switch ON,
M2510008000124
the washer motor operates but the wiper does
• A plastic (resin) wiper arm and blade assembly
not.
has been adopted for weight reduction, with
emphasis on an integrity appearance of the arm NOTE: *: The washer-linked wiper function can be
and blade for better looking. enabled or disabled optionally. Refer to GROUP
• The wiper interval fixed type intermittent wiper 54B, Customize Function P.54B-19.
has been adopted, thus improving a clear rear
view in rainy weather.
51-8 EXTERIOR
WIPER AND WASHER
CONSTRUCTION DIAGRAM
Washer nozzle
Washer hose
Wiper blade
Wiper arm
Wiper motor
AC311520AB
HEADLAMP WASHER
M2510000500103
A headlamp washer mechanism that thrusts out and
retracts nozzles, utilizing the water pressure pro-
duced by motor has been adopted as an option. This
mechanism contributes to better appearances of
vehicles when their washer nozzles are not in use.
The headlamp washer tank used for this mechanism
is also used for the windshield and rear window
washers.
EXTERIOR 51-9
OUTSIDE MIRROR
CONSTRUCTION DIAGRAM
Headlamp washer
nozzle assembly
Washer tank
A
Washer hose Headlamp washer
nozzle cover
Headlamp
Headlamp washer
nozzle
Front bumper
AC312389 AB
OUTSIDE MIRROR
M2510005000158
The door mirror has the following characteristics:
51-10 EXTERIOR
OUTSIDE MIRROR
Door mirror
AC311976 AB